Cloud Docs Home > F5 OpenStack LBaaSv2 Index

F5 LBaaSv2 to BIG-IP Configuration Mapping

Overview

When you issue neutron lbaas commands on your OpenStack Neutron controller or host, the F5® LBaaSv2 driver and F5 agent configure objects on your BIG-IP® device(s). Here, we’ve provided some insight into what exactly happens behind the scenes to configure BIG-IP objects. You can also view the actual calls made by setting the F5 agent’s DEBUG level to ‘True’ in the Agent Configuration File and viewing the logs (/var/log/neutron/f5-openstack-agent.log).

F5 LBaaSv2 uses the f5-sdk to communicate with BIG-IP via the iControl® REST API. The table below shows the corresponding iControl endpoint and BIG-IP object for each neutron lbaas- ‘create’ command.

Command URI BIG-IP Configurations Applied
neutron lbaas-loadbalancer-create https://<icontrol_endpoint>:443/mgmt/tm/sys/folder/~Project_<os_tenant_id> new partition created using the uuid prefix and tenant ID
neutron lbaas-listener-create https://<icontrol_endpoint>:443/mgmt/tm/ltm/virtual/ new virtual server created in the tenant partition
neutron lbaas-pool-create https://<icontrol_endpoint>:443/mgmt/tm/ltm/pool/ new pool created on the virtual server
neutron lbaas-member-create https://<icontrol_endpoint>:443/mgmt/tm/ltm/pool/~Project_<os_tenant_id>~pool1/members/ new member created in the pool
neutron lbaas-healthmonitor-create https://<icontrol_endpoint>:443/mgmt/tm/ltm/monitor/http/ new health monitor created for the pool

The configurations applied when you issue neutron lbaas commands depend on how your BIG-IP is deployed and your network architecture. Far fewer configurations are made for an overcloud, standalone BIG-IP deployment than for an undercloud active-standby pair or device service cluster.

The table below shows what happens on the BIG-IP when various commands are issued in Neutron to the F5 agent for a standalone, overcloud BIG-IP.

Command Action
systemctl start f5-openstack agent
1. Agent reads the vtep self IP defined in the agent config file.
2. BIG-IP advertises the vtep’s IP address.
3. The self IP address is advertised to Neutron as the agent’s
tunneling_ip.
4. A new port for the vtep is added to the OVS switch.
5. Profiles for all tunnel types are created on the BIG-IP. [1]
neutron lbaas-loadbalancer-create
1. A new partition is created using the prefix [2] and tenant ID [3].
2. New fdb records are added for all peers in the network.
3. A new route domain is created.
4. A new self IP where the BIG-IP can receive traffic is created on the
specified subnet.
5. A new tunnel is created, using the vtep as the local address (uses the
vxlan profile created when the agent was first started). [4]
6. A SNAT pool list / SNAT translation list is created on the BIG-IP.
- The number of SNAT addresses that will be created is defined in the agent
config file. [5]
7. A neutron port is created for each SNAT address.
- If SNAT mode is turned off and SNAT addresses is set to 0, the BIG-IP
will act as a gateway so return traffic from members is always routed
through it.
- If SNAT mode is turned on & SNAT addresses is set to 0, SNAT automap
will be used.
neutron lbaas-listener-create
1. A new virtual server is created in the tenant partition on the BIG-IP.
- Attempts to use Fast L4 by default.
- If persistence is configured, Standard is used.
- Uses the IP address assigned to the load balancer by Neutron.
- Uses the route domain that was created for the new partition when the
load balancer was created.
- Traffic is restricted to the tunnel assigned to the load balancer.

If the listener --protocol is TERMINATED_HTTPS: [6]
- The certificate/key container is fetched from Barbican using the URI
defined by the default_tls_container_ref config option.
- The key and certificate are imported to the BIG-IP.
- A custom SSL profile is created using clientssl as the parent profile.
- The SSL profile is added to the virtual server.
neutron lbaas-pool-create
1. A new pool is created in the tenant partition on the BIG-IP.
- It is assigned to the virtual server (or, listener) specified in the
command.
neutron lbaas-member-create
1. A new member is created in the specified pool using the IP address and port
supplied in the command.
- If the member is the first created for the specified pool, the pool
status will change on the BIG-IP.
- If the member is the first created with the supplied IP address, a new
node is also created.
neutron lbaas-healthmonitor-create
1. A new health monitor is created on the BIG-IP for the specified pool.
- If the health monitor is the first created for the specified pool, the
pool status will change on the BIG-IP.
- Health monitors directly affect the status and availability of pools and
members on the BIG-IP. Any additions or changes may result in a status
change for the specified pool.

Further Reading

Footnotes:

[1]This is done for all tunnel types, not just those configured as the advertised_tunnel_types in the L2 Segmentation Mode Settings.
[2]Configured in Environment Settings --> environment_prefix. The default prefix is Project.
[3]Run openstack project list to get a list of configured tenant names and IDs.
[4]If using Global Routed Mode, all traffic is directed to the self IP (no tunnel is created).
[5]Configured in L3 Segmentation Mode Settings –> f5_snat_addresses_per_subnet.
[6]See Certificate Manager / SSL Offloading.