Last updated on: 2024-04-01 03:24:20.

bigip_device_httpd – Manage HTTPD related settings on a BIG-IP system

New in version 1.0.0.

Synopsis

• Manages HTTPD related settings on the BIG-IP. These settings are useful when you want to set GUI timeouts and other TMUI related settings.

Requirements

The below requirements are needed on the local master node that executes this .

• requests

Parameters

Parameter		Choices/Defaults	Configuration	Comments
allow list / elements=string				If you have enabled HTTPD access, specifies the IP address or address range for other systems that can communicate with this system. To specify all addresses, use the value all. An IP address can be specified, such as 172.27.1.10. IP ranges can be specified, such as 172.27.*.* or 172.27.0.0/255.255.0.0.
auth_name string				Sets the BIG-IP authentication realm name.
auth_pam_dashboard_timeout boolean		Choices: no yes		Sets whether or not the BIG-IP dashboard will timeout.
auth_pam_idle_timeout integer				Sets the GUI timeout for automatic logout, in seconds.
auth_pam_validate_ip boolean		Choices: no yes		Sets the authPamValidateIp setting.
fast_cgi_timeout integer				Sets the timeout of FastCGI.
hostname_lookup boolean		Choices: no yes		Sets whether or not to display the hostname, if possible.
log_level string		Choices: alert crit debug emerg error info notice warn		Sets the minimum HTTPD log level.
max_clients integer				Sets the maximum number of clients that can connect to the GUI at once.
provider dictionary added in 1.0.0				A dict object containing connection details.
	auth_provider string			Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no ← yes		If yes, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable F5_TELEMETRY_OFF. Previously used variable F5_TEEM is deprecated as its name was confusing.
	password string / required			The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable F5_PASSWORD. aliases: pass, pwd
	server string / required			The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable F5_SERVER.
	server_port integer	Default: 443		The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT.
	timeout integer			Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←		Configures the transport connection to use when connecting to the remote device.
	user string / required			The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
	validate_certs boolean	Choices: no yes ←		If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
redirect_http_to_https boolean		Choices: no yes		Whether or not to redirect HTTP requests to the GUI to HTTPS.
ssl_cipher_suite raw				Specifies the ciphers the system uses. The values in the suite are separated by colons (:). Can be specified in either a string or list form. The list form is the recommended way to provide the cipher suite. See examples for usage. Use the value default to set the cipher suite to the system default. This value is equivalent to specifying a list of ECDHE-RSA-AES128-GCM-SHA256, ECDHE-RSA-AES256-GCM-SHA384,ECDHE-RSA-AES128-SHA,ECDHE-RSA-AES256-SHA, ECDHE-RSA-AES128-SHA256,ECDHE-RSA-AES256-SHA384,ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384,ECDHE-ECDSA-AES128-SHA,ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES128-SHA256,ECDHE-ECDSA-AES256-SHA384,AES128-GCM-SHA256, AES256-GCM-SHA384,AES128-SHA,AES256-SHA,AES128-SHA256,AES256-SHA256, ECDHE-RSA-DES-CBC3-SHA,ECDHE-ECDSA-DES-CBC3-SHA,DES-CBC3-SHA.
ssl_port integer				The HTTPS port on which the system should listen.
ssl_protocols raw				The list of SSL protocols to accept on the management console. A space-separated list of tokens in the format accepted by the Apache mod_ssl SSLProtocol directive. Can be specified in either a string or list form. The list form is the recommended way to provide the cipher suite. See examples for usage. Use the value default to set the SSL protocols to the system default. This value is equivalent to specifying a list of all,-SSLv2,-SSLv3.

Notes

Note

• Requires the requests Python package on the host. This is as easy as running pip install requests.
• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
• Requires BIG-IP software version >= 12.
• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Set the BIG-IP authentication realm name
  bigip_device_httpd:
    auth_name: BIG-IP
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the auth pam timeout to 3600 seconds
  bigip_device_httpd:
    auth_pam_idle_timeout: 1200
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the validate IP settings
  bigip_device_httpd:
    auth_pam_validate_ip: false
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL cipher suite by list
  bigip_device_httpd:
    ssl_cipher_suite:
      - ECDHE-RSA-AES128-GCM-SHA256
      - ECDHE-RSA-AES256-GCM-SHA384
      - ECDHE-RSA-AES128-SHA
      - AES256-SHA256
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL cipher suite by string
  bigip_device_httpd:
    ssl_cipher_suite: ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-SHA:AES256-SHA256
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL protocols by list
  bigip_device_httpd:
    ssl_protocols:
      - all
      - -SSLv2
      - -SSLv3
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL protocols by string
  bigip_device_httpd:
    ssl_protocols: all -SSLv2 -SSLv3
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

The following are the fields unique to this module:

Key	Returned	Description
auth_name string	changed	The new authentication realm name. Sample: foo
auth_pam_dashboard_timeout boolean	changed	Whether or not the BIG-IP dashboard will timeout.
auth_pam_idle_timeout string	changed	The new number of seconds for GUI timeout. Sample: 1200
auth_pam_validate_ip boolean	changed	The new authPamValidateIp setting. Sample: True
fast_cgi_timeout integer	changed	The new timeout of FastCGI. Sample: 500
hostname_lookup boolean	changed	Whether or not to display the hostname, if possible. Sample: True
log_level string	changed	The new minimum HTTPD log level. Sample: crit
max_clients integer	changed	The new maximum number of clients that can connect to the GUI at once. Sample: 20
redirect_http_to_https boolean	changed	Whether or not to redirect HTTP requests to the GUI to HTTPS. Sample: True
ssl_cipher_suite string	changed	The new ciphers the system uses. Sample: ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-SHA
ssl_cipher_suite_list string	changed	List of the new ciphers the system uses. Sample: ['ECDHE-RSA-AES256-GCM-SHA384', 'ECDHE-RSA-AES128-SHA']
ssl_port integer	changed	The new HTTPS port to listen on. Sample: 10443
ssl_protocols string	changed	The new list of SSL protocols to accept on the management console. Sample: all -SSLv2 -SSLv3

Status

Authors

• Joe Reifel (@JoeReifel)
• Tim Rupp (@caphrim007)