Last updated on: 2024-01-16 03:25:50.

bigip_gtm_pool – Manages F5 BIG-IP GTM pools

New in version 1.0.0.

Synopsis

  • Manages F5 BIG-IP GTM (now BIG-IP DNS) pools.

Parameters

Parameter Choices/Defaults Configuration Comments
alternate_lb_method
string
    Choices:
  • round-robin
  • return-to-dns
  • none
  • ratio
  • topology
  • static-persistence
  • global-availability
  • virtual-server-capacity
  • packet-rate
  • drop-packet
  • fallback-ip
  • virtual-server-score
The load balancing mode the system tries if the preferred_lb_method is unsuccessful in picking a pool.
availability_requirements
dictionary
If you activate more than one health monitor, specifies the number of health monitors that must receive successful responses in order for the link to be considered available.
at_least
integer
Specifies the minimum number of active health monitors that must be successful before the link is considered up.
This parameter is only relevant when a type of at_least is used.
This parameter will be ignored if a type of either all or require is used.
number_of_probers
integer
Specifies the number of probers that should be used when running probes.
When creating a new virtual server, if this parameter is specified, the number_of_probes parameter must also be specified.
The value of this parameter should always be higher than, or equal to, the value of number_of_probers.
This parameter is only relevant when a type of require is used.
This parameter will be ignored if a type of either all or at_least is used.
number_of_probes
integer
Specifies the minimum number of probes that must succeed for this server to be declared up.
When creating a new virtual server, if this parameter is specified, the number_of_probers parameter must also be specified.
The value of this parameter should always be lower than, or equal to, the value of number_of_probers.
This parameter is only relevant when a type of require is used.
This parameter will be ignored if a type of either all or at_least is used.
type
string / required
    Choices:
  • all
  • at_least
  • require
Monitor rule type when monitors is specified.
When creating a new pool, if this value is not specified, the default of 'all' will be used.
fallback_ip
string
Specifies the IPv4 or IPv6 address of the server to which the system directs requests when it cannot use one of its pools to do so. Note that the system uses the fallback IP only if you select the fallback_ip load balancing method.
fallback_lb_method
string
    Choices:
  • round-robin
  • return-to-dns
  • ratio
  • topology
  • static-persistence
  • global-availability
  • virtual-server-capacity
  • least-connections
  • lowest-round-trip-time
  • fewest-hops
  • packet-rate
  • cpu
  • completion-rate
  • quality-of-service
  • kilobytes-per-second
  • drop-packet
  • fallback-ip
  • virtual-server-score
  • none
The load balancing mode the system tries if both the preferred_lb_method and alternate_lb_methods are unsuccessful in picking a pool.
max_answers_returned
integer
Specifies the maximum number of available virtual servers the system lists in a response.
The maximum is 500.
members
list / elements=dictionary
Members to assign to the pool.
The order of the members in this list is the order they will be listed in the pool.
server
string / required
Name of the server which the pool member is a part of.
virtual_server
string / required
Name of the virtual server, associated with the server, the pool member is a part of.
monitors
list / elements=string
Specifies the health monitors the system currently uses to monitor this resource.
When availability_requirements.type is require, you may only have a single monitor in the monitors list.
name
string / required
Name of the GTM pool.
partition
string
Default:
"Common"
Device partition to manage resources on.
preferred_lb_method
string
    Choices:
  • round-robin
  • return-to-dns
  • ratio
  • topology
  • static-persistence
  • global-availability
  • virtual-server-capacity
  • least-connections
  • lowest-round-trip-time
  • fewest-hops
  • packet-rate
  • cpu
  • completion-rate
  • quality-of-service
  • kilobytes-per-second
  • drop-packet
  • fallback-ip
  • virtual-server-score
The load balancing mode the system tries first.
provider
dictionary
added in 1.0.0
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
no_f5_teem
boolean
    Choices:
  • no ←
  • yes
If yes, TEEM telemetry data is not sent to F5.
You may omit this option by setting the environment variable F5_TELEMETRY_OFF.
Previously used variable F5_TEEM is deprecated as its name was confusing.
password
string / required
The password for the user account used to connect to the BIG-IP or the BIG-IQ.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host or the BIG-IQ host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
state
string
    Choices:
  • present ←
  • absent
  • enabled
  • disabled
Pool state. When present, ensures the pool is created and enabled. When absent, ensures the pool is removed from the system. When enabled or disabled, ensures the pool is enabled or disabled (respectively) on the remote device.
ttl
integer
Specifies the number of seconds the IP address, once found, is valid.
type
string / required
    Choices:
  • a
  • aaaa
  • cname
  • mx
  • naptr
  • srv
The type of GTM pool you want to create.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a GTM pool
  bigip_gtm_pool:
    name: my_pool
    type: a
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

- name: Disable pool
  bigip_gtm_pool:
    state: disabled
    name: my_pool
    type: a
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

Return Values

The following are the fields unique to this module:

Key Returned Description
alternate_lb_method
string
changed
New alternate load balancing method for the pool.

Sample:
drop-packet
fallback_ip
string
changed
New fallback IP used when load balacing using the fallback_ip method.

Sample:
10.10.10.10
fallback_lb_method
string
changed
New fallback load balancing method for the pool.

Sample:
fewest-hops
max_answers_returned
integer
changed
The new Maximum Answers Returned value.

Sample:
25
members
complex
changed
List of members in the pool.

  server
string
changed
The name of the server portion of the member.

  virtual_server
string
changed
The name of the virtual server portion of the member.

monitors
list
changed
The new list of monitors for the resource.

Sample:
['/Common/monitor1', '/Common/monitor2']
preferred_lb_method
string
changed
New preferred load balancing method for the pool.

Sample:
topology


Status

Authors

  • Tim Rupp (@caphrim007)
  • Wojciech Wypior (@wojtek0806)