ipfix.name |
A user-defined name for the ipfix configuration. |
ipfix.pool |
Specifies the pool of logging endpoints to receive logging messages. |
ipfix.profileName |
Specifies the profile tcp or udp. |
ipfix.protocolVersion |
ipfix or netflow-9, depending on the type of collectors in the pool. |
loadBalancingMethod |
Defines the load balancing mode used to distribute traffic across multiple pool members: ROUND_ROBIN (default), or RATIO_LEAST_CONN_MEMBER |
pool.members |
Specifies the list of IPv4 address and the service port of the logging endpoints. For example: 10.30.2.220 and port:514. |
pool.minActiveMembers |
Specifies the minimum number of members that must be available in one priority group. |
pool.monitors |
Specified monitors used to monitor pool members. TCP and ICMP are the supported protocols. |
pool.name |
A user-defined name for the HSL logging pool. |
pool.endpoint |
Specifies the IPv4 or IPv6 address and the service port of the logging endpoint: 10.30.2.220:514 or [2002::10:30:2:220]:514. |
syslog.name |
A user-defined name for the syslog configuration. |
syslog.format |
Specifies the logging format: rfc5424 (default), rfc3164, or legacy-bigip. |
syslog.protocol |
Specifies the protocol to use when connecting to the logging endpoint: udp (default) or tcp. |
syslog.distribution |
Specifies the distribution method used to send messages to pool members: adaptive (default) - connections to pool members are added as required to provide enough logging bandwidth. This can have an undesirable effect of logs accumulating on only one pool member when it provides sufficient logging bandwidth on its own. balanced - sends each successive log to a new pool member, balancing the logs among them according to the pool's load balancing method. replicate - replicates each log to all pool members, for redundancy. |
syslog.pool |
Specifies the pool of logging endpoints to receive logging messages. |