| ID Number |
Description |
| 0x0601000000000001 |
"HAL ZMQ Input Message Router - Not configured" |
| 0x0601000000000002 |
"Service Starting" version=%s |
| 0x0a01000000000001 |
"DIAG ZMQ Input Message Router - Not configured" |
| 0x0a01000000000002 |
"Service Starting" version=%s |
| 0x0c01000000000002 |
"FWU failed to create the HAL connection" |
| 0x0c01000000000004 |
"FWU timed out waiting for HAL to be ready" seconds=time.Duration |
| 0x0c01000000000005 |
"FWU failed to create BIOS recovery image" error=error |
| 0x0c01000000000006 |
"FWU Init failed to create ZMQ PUB" error=error |
| 0x0c01000000000007 |
"FWU Init failed to start ZMQ PUB" error=error |
| 0x0c01000000000008 |
"Service Starting" version=%s |
| 0x0c03000000000001 |
"BMC SEL Write" event=%s eventDetail=%s |
| 0x0c03000000000002 |
"LOP PEL Write" event=%s |
| 0x0c03000000000004 |
"PCIe slot speed not expected, retrying" pcieSpeed=%s expected=%s actual=%s |
| 0x0c03000000000005 |
"systemctl call reboot-guard did not complete" |
| 0x0d01000000000001 |
"unable to verify platform-hal at startup" |
| 0x0d01000000000002 |
"unable to query platform data at startup" |
| 0x0d01000000000003 |
"platform monitor starting" version=%v build_date=%v role=%v slot=%v |
| 0x0d01000000000004 |
"unable to parse configuration file" error=%v |
| 0x0d01000000000005 |
"unable to notify ha status change" |
| 0x0d01000000000006 |
"platform hal remote call error" index=%d error=%v |
| 0x0d01000000000007 |
"error occurred while processing notification stream" stream=%v error=%v |
| 0x0d01000000000008 |
"error occurred while sending notification stream" stream=%v error=%v |
| 0x0d01000000000009 |
"error while building confd stream" name=%v kind=%v error=%v |
| 0x0d0100000000000a |
"tenant::model - remove tenant error" tenant=%v error=%v |
| 0x0d0100000000000b |
"tenant::model - add tenant error" tenant=%v error=%v |
| 0x0d0100000000000c |
"tenant::model - update tenant error" tenant=%v error=%v |
| 0x0d0100000000000d |
"lop pel is empty" |
| 0x0d0100000000000e |
"Platform monitor tailing event log" file=%v |
| 0x0d0100000000000f |
"verifying platform hal" address=%v |
| 0x0d01000000000010 |
"Platform::State Storage - CPU reconfigure detected" platform=%s size=%d previous=%d |
| 0x0d01000000000011 |
"Platform::State Storage - Interface reconfigure detected" platform=%s size=%d previous=%d |
| 0x0d01000000000012 |
"TC ZMQ Input Message Router - Not configured" |
| 0x101000000000001 |
"cdb_set failed setting oper data (%operdatapath/%s) (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000002 |
"maapi_connect failed (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000003 |
"Failed to start maapi platform_session (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000004 |
"Failed to create component (%component/%s)(%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000005 |
"Failed to set element (%element/%s)(%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000006 |
"Failed to load schemas (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000007 |
"Failed to create socket (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000008 |
"Failed to open socket (%sockettype/%s) (%errno/%d)" |
| 0x101000000000009 |
"Unable to publish without slotId" |
| 0x101000000000010 |
"Failed to create component (%component/%s)(%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000011 |
"Failed to start cdb platform_session (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000012 |
"Failed to close cdb platform_session (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000013 |
"Failed to set cdb path (%path/%s) (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000014 |
"Failed to publish (%property/%s) (%value/%s)" |
| 0x101000000000015 |
"cdb_get: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x101000000000016 |
"cdb_cd: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x101000000000017 |
"Write to cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x101000000000018 |
"service-instance (%NAME/%s) not in cdb" |
| 0x101000000000019 |
"Delete from cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x101000000000021 |
"Failed to delete component (%component/%s)(%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000022 |
"Failed to commit maapi transaction (%confderrno/%d) (%confdlasterr/%s)" |
| 0x101000000000023 |
"Failed to commit added maapi elements (%confderrno/%d) (%confdlasterr/%s)" |
| 0x102000000000001 |
"Platform-mgr HAL response error. (%errorcode/%d) (%errmsg/%s)" |
| 0x102000000000002 |
"Wrong response payload count (%service/%s) (%expected/%d) (%received/%d) (%actionid/%d)" |
| 0x102000000000003 |
"Received null or unknown HAL response. (%action_id/%d)" |
| 0x102000000000004 |
"Received null or unknown FWU response. (%action_id/%d)" |
| 0x103000000000001 |
"Platform-mgr firmware update requesting blade reboot to complete update (%slot/%d) (%component/%s)" |
| 0x103000000000002 |
"Platform-mgr firmware update request for CPLD update and restart failed. (%slot/%d)" |
| 0x103000000000003 |
"Platform-mgr firmware update is requesting a power cycle to complete the update.(%slot/%d)" |
| 0x103000000000004 |
"Platform-mgr firmware update response error. (%errorcode/%d) (%errmsg/%s)" |
| 0x103000000000005 |
"Platform-mgr all firmware up to date, no update required" |
| 0x103000000000006 |
"Platform-mgr Firmware update in progress (%elapsedseconds/%d)" |
| 0x103000000000007 |
"Platform-mgr firmware update needed (%slot/%d) (%component/%s) (%currentversion/%s) (%targetversion/%s)" |
| 0x103000000000008 |
"Platform-mgr firmware update request for power cycle restart failed. (%slot/%d)" |
| 0x103000000000009 |
"Platform-mgr firmware update requesting power cycle to complete update (%slot/%d) (%component/%s)" |
| 0x103000000000010 |
"Firmware update disabled by environment variable" |
| 0x103000000000011 |
"Platform-mgr All Core firmware components up to date, no update required - Starting update check of system firmware (%slot/%d)" |
| 0x103000000000012 |
"Platform-mgr Core firmware update complete - Starting update check of system firmware (%slot/%d) (%updateaction/%s)" |
| 0x103000000000013 |
"CPLD reload needed to complete firmware update." |
| 0x103000000000014 |
"Platform-mgr system firmware update in progress (%elapsedseconds/%d)" |
| 0x103000000000015 |
"Platform-mgr system firmware update needed (%slot/%d) (%component/%s) (%currentversion/%s) (%targetversion/%s)" |
| 0x103000000000016 |
"Platform-mgr all system firmware components up to date, no update required" |
| 0x103000000000017 |
"Platform-mgr system firmware update complete (%slot/%d)" |
| 0x103000000000018 |
"File created to indicate AFU status (%filepath/%s)" |
| 0x103000000000019 |
"System is unusable and no tenants can be deployed as the AFU status file creation has failed (%filepath/%s)" |
| 0x103000000000020 |
"Platform-mgr NAC Firmware upadte is pending, requested for update." |
| 0x103000000000022 |
"Initiating (%action/%s) for core firmware upgrade" |
| 0x103000000000024 |
"NAC upgrade: Failed to remove NAC upgrade state file (%filepath/%s)" |
| 0x103000000000025 |
"Platform-mgr firmware update is requesting a double power cycle to complete the update (%slot/%d)" |
| 0x103000000000026 |
"NAC upgrade: Failed to write state file (%filepath/%s)" |
| 0x103000000000027 |
"NAC upgrade: Failed to read state file (%filepath/%s)" |
| 0x104000000000001 |
"Platform-mgr starting (%version/%s) (%date/%s)" |
| 0x104000000000002 |
"Platform-mgr exiting" |
| 0x104000000000003 |
"Platform-mgr error (%error/%s)" |
| 0x104000000000004 |
"Platform-mgr unable to initialize ZMQ. (%error/%d)" |
| 0x104000000000005 |
"Platform-mgr checking if firmware update is needed (%slot/%d)" |
| 0x104000000000006 |
"Failed to open file (%filename/%s)" |
| 0x104000000000007 |
"Failed to read file (%filename/%s)" |
| 0x104000000000008 |
"Failed to write to file (%filename/%s)" |
| 0x104000000000009 |
"Failed to close file (%filename/%s)" |
| 0x104000000000013 |
"Platform-mgr too many Hardware-Status messages, some messages may be dropped" |
| 0x104000000000014 |
"LOP RTC updated. (%diff/%lld)" |
| 0x104000000000015 |
"Unknown command line argument (%arg/%s)" |
| 0x104000000000016 |
"Blade board lifecycle (%lifecycle/%s)" |
| 0x104000000000017 |
"ZMQ Message Server Started. Listening on (%hipri/%d) (%lowpri/%d)" |
| 0x104000000000018 |
"Failed to register endpoint (%endpoint/%s)" |
| 0x104000000000019 |
"Failed to deregister endpoint (%endpoint/%s)" |
| 0x104000000000020 |
"Failed to send reply (%endpoint/%s)" |
| 0x104000000000021 |
"Failed to get zmq handle to socket" |
| 0x104000000000022 |
"Unexpected crypto device (%name/%s) (%pciid/%s)" |
| 0x104000000000024 |
"Failed to initialize endpoint for zmq to hal or fwu" |
| 0x104000000000025 |
"Failed to access (%filename/%s) to update timezone (%error/%s)" |
| 0x104000000000026 |
"Failed to create (%filename/%s) to update timezone (%error/%s)" |
| 0x104000000000027 |
"Platform-mgr checking if system firmware update is needed (%slot/%d)" |
| 0x104000000000028 |
"Platform-mgr EventSubscriber failed to initialize" |
| 0x104000000000029 |
"Platform-mgr received a EventSubscriber notice for (%name/%s)" |
| 0x104000000000030 |
"Memory allocation failed (%TYPE/%s)" |
| 0x104000000000031 |
"Identified user modification in Internal-setting file, rebooting the system" |
| 0x104000000000032 |
"New License installed, rebooting the system" |
| 0x104000000000033 |
"marketing-name (%name/%s) is not valid for (%hardware/%s)" |
| 0x104000000000034 |
"Unable to find throttle_level in license file" |
| 0x104000000000037 |
"Platform-mgr error (%error/%s)" |
| 0x104000000000039 |
"Platform-mgr Raid Alert error (%error/%s)" |
| 0x104000000000040 |
"Invalid license installed" |
| 0x104000000000041 |
"Timezone set (%ZONE/%s)" |
| 0x104000000000042 |
"Failed to update timezone (%FILE/%s) (%ERROR/%s)" |
| 0x104000000000043 |
"Timezone is invalid (%ZONE/%s)" |
| 0x104000000000044 |
"Unable to read timezone data (%ZONE/%s) (%ERROR/%s)" |
| 0x104000000000045 |
"SERVICE_INDICATOR initializing platform-mgr in FIPS 140-3 mode" |
| 0x104000000000046 |
"Platform-mgr error : Failed to reboot appliance" |
| 0x104000000000047 |
"Number of online cores (%ONLINE_CORES/%d)does not match the number of licensed cores (%LICENSED_CORES/%d), rebooting the system" |
| 0x104000000000048 |
"CPU frequency has changed, rebooting the system" |
| 0x104000000000049 |
"Internal-setting file was not able to be read (%ERRNOSTR/%s), rebooting the system" |
| 0x1301000000000002 |
"Adding remote server (%host/%s)" |
| 0x1301000000000003 |
"Removing remote server (%host/%s)" |
| 0x1301000000000004 |
"rsyslog.conf operation failed. (%path/%s) (%msg/%s)" |
| 0x1301000000000005 |
"Setting component log severity (%name/%s) (%severity/%d)" |
| 0x1301000000000008 |
"File I/O operation failed (%path/%s)" |
| 0x1301000000000009 |
"Initialization error (%component/%s)" |
| 0x1301000000000010 |
"Remote logging destinations modified (%mode/%s)" |
| 0x1301000000000013 |
"Hostlogs fwdconfig update (%remote/%s) (%fwdon/%s)" |
| 0x1301000000000015 |
"Database operation error: (%op/%s) (%errorstr/%s)" |
| 0x1301000000000016 |
"Hostlogs forwarding to active for this node changed (%state/%s)" |
| 0x1301000000000017 |
"Missing slot identifier in environment" |
| 0x1301000000000018 |
"Clearing host logs forwarding configuration for this node" |
| 0x1301000000000021 |
"Internal config handler error (%issue/%s) (%severity/%s)" |
| 0x1301000000000022 |
"Rsyslog configure daemon starting. (%version/%s) (%date/%s)" |
| 0x1301000000000023 |
"Setting component's log severity (%list/%s)" |
| 0x1301000000000024 |
"Remote logging selector modified (%dst/%s) (%facility/%s) (%severity/%s)" |
| 0x1301000000000025 |
"Hostname settings. (%operation/%s) (%hostname/%s) (%includeinlogs/%s)" |
| 0x1301000000000026 |
"Failed to create CRL directory (%path/%s) (%error/%s)" |
| 0x1301000000000027 |
"Certification revocation list (CRL) consolidation failed." |
| 0x1301000000000028 |
"CRL file available for TLS validation (%path/%s)" |
| 0x1301000000000030 |
"SECURITY: CRL consolidation failed - remote servers TLS connections will not be established." |
| 0x1301000000000031 |
"Removed CRL files (%reason/%s)" |
| 0x1901000000000001 |
"Dagd service starting. (%version/%s) (%build_date/%s)" |
| 0x1901000000000002 |
"Dagd service exiting." |
| 0x1901000000000003 |
"New connection. (%remote_addr/%s)" |
| 0x1901000000000006 |
"Dagd connection EOF. (%remote_addr/%s)" |
| 0x1901000000000007 |
"Dagd connection error. (%remote_addr/%s) (%code/%d) (%message/%s)" |
| 0x1901000000000008 |
"Error creating a commit reply message. (%error_code/%d)" |
| 0x1901000000000009 |
"Received commit reply, but no commit request found." |
| 0x1901000000000011 |
"Error processing a sdag message. (%msg_type/%d) (%error_code/%d)" |
| 0x1901000000000015 |
"cdb_get: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x1901000000000016 |
"cdb_cd: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x1901000000000017 |
"Couldn't write DagState for tenant (%tenant_name/%s) (%message/%s)" |
| 0x1901000000000019 |
"Couldn't bulk write DagState for tenant (%tenant_name/%s) (%confd_errno/%d) (%confd_errstr/%s)" |
| 0x1901000000000020 |
"Tenant Disconnect (%remote_addr/%s)" |
| 0x1901000000000022 |
"Dagd ZMQ Server starting." |
| 0x1901000000000023 |
"Dagd ZMQ Server received empty message." |
| 0x1901000000000024 |
"Dagd Tmstat error on table (%field/%s) (%table_name/%s): (%text/%s)" |
| 0x1901000000000025 |
"Dagd ZMQ Server exiting." |
| 0x1901000000000026 |
"Dagd ZMQ Server error: (%error_message/%s) (%endpoint/%s)" |
| 0x1901000000000027 |
"Dagd ZMQ Server error: (%error_message/%s) (%endpoint/%s) (%error/%d)" |
| 0x1901000000000028 |
"Dagd ZMQ Server error: (%error_message/%s) (%endpoint/%s) (%error/%d)" |
| 0x1901000000000029 |
"Dagd ZMQ server req message: (%error_message/%s)." |
| 0x1901000000000030 |
"(%error_message/%s) (%error/%d)" |
| 0x1901000000000031 |
"Dagd handler error: (%error_message/%s)." |
| 0x1901000000000032 |
"Dadg tenant stat table row update error:(%field/%d) (%error_message/%s)." |
| 0x1901000000000033 |
"Dagd published DAG state: (%tenant_name/%s) (%table_type/%s) (%sdag_table_hash/%u)." |
| 0x1901000000000037 |
"cdb_exist: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x1901000000000038 |
"Connection refused; unexpected client IP. (%CONNECTED_CLIENT_IP/%s) (%DERIVED_TENANT_ID/%d) (%EXPECTED_TENANT_ID/%d)" |
| 0x1901000000000039 |
"Connection refused; unable to find tenant name in ConfD matching name in request body. (%REQUEST_TENANT_NAME/%s) (%CONNECTED_CLIENT_IP/%s)" |
| 0x1901000000000043 |
"Found and deleted stale dag-state. (%name/%s)" |
| 0x1901000000000044 |
"publishing dag context. (%sdag_ctx/%s)" |
| 0x1b01000000000001 |
"Key Migration Recovery failed (%stage/%s)" |
| 0x1b01000000000002 |
"Key Migration failed, attempting to restore (%stage/%s)" |
| 0x1b01000000000003 |
"Failed to connect to ConfD MAAPI for peer (%addr/%s)" |
| 0x1b01000000000004 |
"Failed to open peer file (%file/%s)(%errno/%s)" |
| 0x1b01000000000005 |
"Failed to start user session for peer (%addr/%s)" |
| 0x1b01000000000006 |
"Failed to start maapi trans for peer (%addr/%s)" |
| 0x1b01000000000007 |
"Failed to open secure elements manifest file (%file/%s)(%errno/%s)" |
| 0x1b01000000000008 |
"Unable to create Mappi transaction (%error/%s)(%errno/%s)" |
| 0x1b01000000000009 |
"Failed to get element from cdb (%path/%s)(%error/%s)(%errno/%s)" |
| 0x1b01000000000010 |
"Failed to set element in cdb (%path/%s)(%error/%s)(%errno/%s)" |
| 0x1b01000000000011 |
"Failed to set system aaa primary-key state status for (%status/%s)" |
| 0x1b01000000000012 |
"Failed to reload confd config" |
| 0x1b01000000000013 |
"Failed complete_transaction for (%path/%s)" |
| 0x1b01000000000019 |
"Failed to reload confd config for peer (%addr/%s)" |
| 0x1b01000000000020 |
"Peer Communication failure - failed to set peer confds in read only mode (%enable/%s)(%addr/%s)" |
| 0x1b01000000000021 |
"Failed to decrypt element (%elem/%s)(%path/%s)" |
| 0x1b01000000000022 |
"No items found for secure elem path (%path/%s)" |
| 0x1b01000000000023 |
"The callpoint tag isn't defined (%tag/%d)" |
| 0x1b01000000000024 |
"Starting Key Migration" |
| 0x1b01000000000025 |
"Key Migration was successful" |
| 0x1b01000000000028 |
"Completed step (%step/%s)" |
| 0x1b01000000000032 |
"Primary Key successfully retrieved from EEPROM" |
| 0x1b01000000000033 |
"Failed to fetch Key. Error code (%err_code/%d)" |
| 0x1b01000000000034 |
"Hash successfully retrieved from EEPROM" |
| 0x1b01000000000035 |
"Failed to fetch Hash from EEPROM. Error code (%err_code/%d)" |
| 0x1b01000000000036 |
"Error: Key Hash failed.\nHash: (%hash/%s)\nsha512: (%sha/%s)\n" |
| 0x1b01000000000037 |
"Primary Key successfully saved into EEPROM" |
| 0x1b01000000000038 |
"Failed to set Key. Error code (%err_code/%d)" |
| 0x1b01000000000039 |
"Hash successfully saved into EEPROM" |
| 0x1b01000000000040 |
"Failed to set Hash. Error code (%err_code/%d)" |
| 0x1b01000000000041 |
"Error Occurred while accessing storage." |
| 0x1b01000000000042 |
"Failed to set Key. Not an Active CC." |
| 0x1b01000000000043 |
"The lopd daemon is not running, bailing out." |
| 0x1b01000000000044 |
"The HAL service is not running, bailing out." |
| 0x1b01000000000045 |
"Failed in maapi_install_crypto_keys." |
| 0x1b01000000000046 |
"Failed in maapi_get_str_elem for (%path/%s)" |
| 0x1b01000000000047 |
"Failed to decrypt (%type/%s)." |
| 0x1b01000000000048 |
"Failed in maapi_set_namespace (%namespace/%s)." |
| 0x1b01000000000049 |
"Failed in maapi_set_elem2 for (%path/%s)" |
| 0x1b01000000000050 |
"Failed in maapi_apply_trans." |
| 0x1b01000000000051 |
"Failed in maapi_finish_trans." |
| 0x1b01000000000052 |
"Environment missing 'partition_id'" value.; |
| 0x1b01000000000053 |
"Environment missing 'cc_ip' value."; |
| 0x1b01000000000054 |
"Unable to create socket: (%errno/%s)." |
| 0x1b01000000000055 |
"Failed to connect to ConfD maapi(%addr/%s) (%error/%s)" |
| 0x1b01000000000056 |
"Failed to connect to ConfD cdb(%addr/%s)(%error/%s)" |
| 0x1b01000000000057 |
"Failed in cdb_start_session2." |
| 0x1b01000000000058 |
"Failed in cdb_num_instances (%path/%s)." |
| 0x1b01000000000059 |
"Failed in cdb_get_u_int8 (%path/%s)." |
| 0x1b01000000000060 |
"Failed in cdb_get_bool (%path/%s)." |
| 0x1b01000000000061 |
"Partition found was not enabled (%id/%d)." |
| 0x1b01000000000062 |
"Failed in cdb_get_str for (%path/%s)" |
| 0x1b01000000000063 |
"Partition not found." |
| 0x1b01000000000064 |
"Failed in maapi_start_trans_flags2." |
| 0x1b01000000000065 |
"Failed in maapi_start_user_session3 (%user/%s) (%context/%s) (%group/%s)." |
| 0x1b01000000000067 |
"Key value on EEPROM is empty" |
| 0x1b01000000000068 |
"Hash value on EEPROM is empty" |
| 0x1b01000000000069 |
"ParseAndValidateKeyHash failed" |
| 0x1b01000000000070 |
"(%func/%s) failed with return code (%ret/%d)." |
| 0x1b01000000000071 |
"(%func/%s) failed." |
| 0x1b01000000000072 |
"Failed to allocate memory." |
| 0x1b01000000000073 |
"Hash is successfully retrieved from TPM2" |
| 0x1b01000000000074 |
"Failed to fetch Hash from TPM2. Error code (%rc/%d)" |
| 0x1b01000000000075 |
"Key is successfully retrieved from TPM2" |
| 0x1b01000000000076 |
"Failed to fetch Key from TPM2. Error code (%rc/%d)" |
| 0x1b01000000000077 |
"Security violation attempting to fetch keys. (%proc/%s)" |
| 0x1b01000000000078 |
"Retrying reading confd: attempt: (%num/%d)" |
| 0x1b01000000000079 |
"SERVICE_INDICATOR initializing confd-key-migrationd in FIPS 140-3 mode" |
| 0x1b01000000000080 |
"Socket setopt failed (%name/%s) (%option/%s) (%errno/%s)" |
| 0x1b01000000000081 |
"Retrying the reading of key in case lopd was down temporarily." |
| 0x1c01000000000001 |
"Upgrade Service starting (%version/%s) (%build_date/%s)" |
| 0x1c01000000000002 |
"Upgrade Service exiting." |
| 0x1c01000000000005 |
"Operation succeeded (%module/%s) (%output/%s)" |
| 0x1c01000000000006 |
"Operation failed (%module/%s) (%output/%s)" |
| 0x1c01000000000007 |
"Confd Operation (%module/%s) (%operation/%s)" |
| 0x1c01000000000008 |
"Confd Operation failed (%module/%s) (%operation/%s) (%error_code/%d)" |
| 0x1c01000000000009 |
"Upgrade to same version (%module/%s) (%type/%s) (%version/%s)" |
| 0x1c01000000000011 |
"System upgrade compatibility failed with message (%module/%s) (%message/%s)" |
| 0x1c01000000000012 |
"Incompatible portgroup config mode version change (%module/%s) (%target_version/%s) (%mode/%s) (%port_groups/%s)" |
| 0x1c01000000000013 |
"Failed to get the CDB data (%module/%s) (%path/%s) (%errno/%d) (%error/%s)" |
| 0x1f01000000000001 |
"audit-service starting (%version/%s) (%log/%s) (%date/%s)" |
| 0x1f01000000000002 |
"audit-service exiting." |
| 0x1f01000000000003 |
"inotif error (%msg/%s)" |
| 0x1f01000000000004 |
"file error (%msg/%s) (%file/%s)" |
| 0x1f02000000000001 |
"Could not write database (%OBJECT/%s) (%ERR/%s)" |
| 0x1f02000000000002 |
"Could not delete user success login instance. (%user/%s) (%ERR/%s)" |
| 0x1f02000000000003 |
"ConfD Error (%msg/%s)" |
| 0x1f03000000000001 |
"audit (%user/%s) (%cmd/%s)" |
| 0x1f03000000000002 |
"audit (%user/%s) (%cmd/%s)" |
| 0x1f03000000000003 |
"audit create (%ctx/%s) (%user/%s) (%path/%s)" |
| 0x1f03000000000004 |
"audit delete (%ctx/%s) (%user/%s) (%path/%s)" |
| 0x1f03000000000005 |
"audit modify (%ctx/%s) (%user/%s) (%path/%s)" |
| 0x1f03000000000006 |
"audit value set (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)" |
| 0x1f03000000000007 |
"audit move first (%ctx/%s) (%user/%s) (%path/%s)" |
| 0x1f03000000000008 |
"audit move after (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)" |
| 0x1f03000000000009 |
"audit delete attr (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)" |
| 0x1f03000000000010 |
"audit set attr (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)" |
| 0x1f03000000000011 |
"User account locked (%reason/%s) (%failcount/%u) (%unlock_time/%u) (%user/%s)" |
| 0x1f03000000000012 |
"User authentication failed (%reason/%s) (%failcount/%u) (%user/%s)" |
| 0x1f03000000000013 |
"Password changed successfully for user (%user/%s)" |
| 0x2001000000000001 |
"Image Agent starting (%version/%s) (%date/%s)" |
| 0x2001000000000002 |
"Image Agent exiting." |
| 0x2001000000000003 |
"Internal error (%ERR/%s)" |
| 0x2001000000000004 |
"Not in Active Mode. No write operations." |
| 0x2001000000000006 |
"System upgrade is successful." |
| 0x2001000000000008 |
"System Image change notification is being sent." |
| 0x2001000000000009 |
"SERVICE_INDICATOR initializing image_agent in FIPS 140-3 mode." |
| 0x2001000000000010 |
"System rollback initiation notification is being sent." |
| 0x2002000000000001 |
"Failed to start DB session (%ERR/%s)" |
| 0x2002000000000002 |
"Failed to end DB session (%ERR/%s)" |
| 0x2002000000000003 |
"Failed to access DB (%IMAGE/%s) (%ERR/%s)" |
| 0x2002000000000004 |
"Failed to create DB entry (%IMAGE/%s) (%ERR/%s)" |
| 0x2002000000000005 |
"Failed to delete DB entry (%IMAGE/%s) (%ERR/%s)" |
| 0x2002000000000006 |
"Failed to read DB (%IMAGE/%s) (%FIELD/%s) (%ERR/%s)" |
| 0x2002000000000007 |
"Failed to write DB (%IMAGE/%s) (%FIELD/%s) (%ERR/%s)" |
| 0x2002000000000009 |
"Failed to create image processing directory (%IMAGE/%s)" |
| 0x2002000000000010 |
"Failed to verify image signature. Removed. (%IMAGE/%s) (%FAILURE/%s)" |
| 0x2002000000000011 |
"Image file transfer started (%IMAGE/%s)" |
| 0x2002000000000012 |
"Image file transfer completed (%IMAGE/%s)" |
| 0x2002000000000013 |
"Image file transfer interrupted (%IMAGE/%s)" |
| 0x2002000000000014 |
"Image file transfer failed (%IMAGE/%s)" |
| 0x2002000000000015 |
"Image file signature verified (%IMAGE/%s)" |
| 0x2002000000000016 |
"Failed to open socket." |
| 0x2002000000000017 |
"Failed to create maapi transaction." |
| 0x2002000000000018 |
"Failed to start user session." |
| 0x2002000000000019 |
"Failed to start trans (%CONFD_ERR/%s)" |
| 0x2002000000000020 |
"Version comparison failed." |
| 0x2002000000000021 |
"Image file processing started (%IMAGE/%s)" |
| 0x2002000000000022 |
"Image file processing failed (%IMAGE/%s) (%REASON/%s)" |
| 0x2002000000000023 |
"Image file processing completed (%IMAGE/%s)" |
| 0x2002000000000024 |
"Invalid IMAGES file removed (%FILE/%s)" |
| 0x2002000000000025 |
"Invalid SPEC file removed (%FILE/%s)" |
| 0x2002000000000026 |
"Cannot identify file type. Removing. (%FILE/%s)" |
| 0x2002000000000027 |
"System Rollback is in progress. (%Version/%s)" |
| 0x2002000000000028 |
"System Rollback is completed. (%Version/%s)" |
| 0x2002000000000029 |
"Rollback version matching failed. (%type/%s) (%Active/%s) (%RBK/%s)" |
| 0x2002000000000030 |
"System rollback initiation failed." |
| 0x2002000000000031 |
"Disk usage exceeded threshold. Removing (%FILE/%s)" |
| 0x2002000000000032 |
"Rollback initiation is in-progress. (%version/%s)" |
| 0x2005000000000001 |
"Image file added (%FILE/%s)" |
| 0x2005000000000002 |
"Image file removed (%FILE/%s)" |
| 0x2005000000000003 |
"Image file replicated (%FILE/%s)" |
| 0x2005000000000004 |
"Image file not replicated (%FILE/%s)" |
| 0x2005000000000005 |
"Image file replica deleted (%FILE/%s)" |
| 0x2005000000000006 |
"Image file replica not deleted (%FILE/%s)" |
| 0x2005000000000007 |
"Image file identified (%FILE/%s) (%TYPE/%s)" |
| 0x2006000000000001 |
"Failed to create maapi transaction (%ERR/%s)" |
| 0x2006000000000002 |
"Invalid image type (%IMAGE/%s)" |
| 0x2006000000000003 |
"Internal Error: Unsupported argument." |
| 0x2006000000000004 |
"Operation unsuccessful (%FAILURE/%s)" |
| 0x2006000000000005 |
"Error (%COMP/%s) component (%COMP_VERSION/%s) of ISO (%ISO/%s) is in active state." |
| 0x2006000000000006 |
"Error Image (%VERSION/%s) is in active state." |
| 0x2006000000000007 |
"Error Image (%VERSION/%s) is part of ISO (%ISO/%s)" |
| 0x2006000000000008 |
"Error Image (%VERSION/%s) does not exist." |
| 0x2006000000000009 |
"Error number (%ERRORNO/%d): unable to get response from sw mgmt API." |
| 0x2006000000000010 |
"Unsupported appliance type: (%TAG/%d)" |
| 0x2006000000000011 |
"Missing newline in response from sw mgmt API." |
| 0x2006000000000012 |
"popen error." |
| 0x2006000000000013 |
"Error unexpected response back from API: (%RES/%s)" |
| 0x2006000000000014 |
"Looks like we can delete the (%APPLIANCE/%s) image (%VERSION/%s)" |
| 0x2006000000000015 |
"NULL Image version is invalid." |
| 0x2006000000000016 |
"Failed to read config data from confd." |
| 0x2006000000000017 |
"Failed to complete maapi transaction (%ERR/%s)" |
| 0x2006000000000018 |
"Maapi get elem failed (%ERR/%s)" |
| 0x2006000000000019 |
"Error in reading base version." |
| 0x2006000000000020 |
"We can delete the package (%PACKAGE/%s)with version(%VERSION/%s)" |
| 0x2006000000000021 |
"NULL package version is invalid." |
| 0x2006000000000022 |
"Error package(%PACKAGE/%s) with version(%VERSION/%s) does not exist." |
| 0x2006000000000023 |
"Error package(%PACKAGE/%s) with version(%VERSION/%s) is in active state." |
| 0x2006000000000024 |
"User rejected removing active package (%PACKAGE/%s) with version (%VERSION/%s)" |
| 0x2006000000000025 |
"Confd Operation failed (%OP/%s) (%ERR/%d)" |
| 0x2007000000000001 |
"Failed to read if image is in use (%IMAGE/%s) (%ERR/%s)" |
| 0x2007000000000002 |
"Failed to write inuse flag (%OPERATION/%s) (%IMAGE/%s) (%ERR/%s)" |
| 0x2007000000000003 |
"Failed to read tenant name (%ERR/%s)" |
| 0x2007000000000004 |
"Failed to read tenant field (%TENANT/%s) (%FIELD/%s) (%ERR/%s)" |
| 0x2007000000000005 |
"Image does not exist in DB (%IMAGE/%s)" |
| 0x2007000000000006 |
"Running Versions update transaction failed. retrying (%count/%d)" |
| 0x2007000000000007 |
"Failed to fetch image active version (%obj_name/%s)" |
| 0x2007000000000008 |
"Image version update failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x201000000000001 |
"L2Agent starting (%version/%s) (%date/%s) (%slotid/%u) (%role/%s) (%platform/%s)" |
| 0x201000000000002 |
"BaseMac info not available. Exiting ..." |
| 0x201000000000003 |
"Internal subnet (%SUBNET/%s)" |
| 0x201000000000004 |
"Detected FPGAMGR restart (%slotid/%u). Exiting..." |
| 0x201000000000006 |
"WAITING FOR PORTGROUP DATA......" |
| 0x201000000000007 |
"RECEIVED PORTGROUP DATA......" |
| 0x201000000000008 |
"WAITING FOR INTERFACE DATA......" |
| 0x201000000000009 |
"RECEIVED INTERFACE DATA......" |
| 0x201000000000010 |
"PG data different - publish portgroups" |
| 0x201000000000011 |
"PG data matches - do not publish" |
| 0x201000000000012 |
"Interface data different - publish interfaces" |
| 0x201000000000013 |
"Interface config data matches - do not publish" |
| 0x201000000000016 |
"Empty base Mac" |
| 0x201000000000017 |
"sending reboot failed for blade (%BLADE/%d) (%ERRNOSTR/%s) (%RC/%d)" |
| 0x201000000000018 |
"cannot create reboot socket (%ERRNOSTR/%s)" |
| 0x201000000000019 |
"cannot connect to reboot socket (%ERRNOSTR/%s)" |
| 0x201000000000020 |
"reboot sent ok for blade (%BLADE/%d)" |
| 0x201000000000021 |
"Interface oper data publish" |
| 0x201000000000022 |
"Unrecognized platform type (%PLATFORM/%s). Exiting..." |
| 0x201000000000023 |
"(%test/%s)" |
| 0x201000000000024 |
"WAITING FOR PIPELINE DATA......" |
| 0x201000000000025 |
"RECEIVED PIPELINE DATA......" |
| 0x201000000000026 |
"Pipeline data different - publish pipelines" |
| 0x201000000000027 |
"Pipeline data matches - do not publish" |
| 0x201000000000028 |
"l2_agent published pipelines after retries count (%COUNT/%d)" |
| 0x201000000000029 |
"l2_agent published port-speed for interfaces after retries count (%COUNT/%d)" |
| 0x201000000000030 |
"NIC_MGR_ZMQ_ADDR env_var not found. Exiting ..." |
| 0x201000000000031 |
"l2_agent found port profile (%PROFILE/%d)" |
| 0x201000000000032 |
"l2_agent changed the port profile (%FROMPROFILE/%s) (%TOPROFILE/%s)" |
| 0x201000000000033 |
"l2_agent failed changing port profile (%PROFILE/%d) (%ERRNOSTR/%s)" |
| 0x201000000000034 |
"l2_agent port profile change started reboot (%PROFILE/%d)" |
| 0x201000000000035 |
"l2_agent failed port-profile reboot (%ERRNOSTR/%s)" |
| 0x201000000000037 |
"Read hardware port-profile (%PROFILE/%s) (%RETRYCOUNT/%d)" |
| 0x201000000000038 |
"Cannot find the config entry for virtual-network (%VNET/%s)" |
| 0x201000000000039 |
"Cannot find the config entry for virtual-wire (%VWIRE/%s)" |
| 0x201000000000040 |
"AUDIT - SERVICE_INDICATOR initializing L2-agent in FIPS 140-3 mode" |
| 0x201000000000041 |
"Interface data received - publish interfaces" |
| 0x201000000000042 |
"Process port profile update: current hardware and cdb settings (%hardware/%s) (%cdb/%s)" |
| 0x201000000000043 |
"allow-multi-intf-vlans (%enabled/%d)" |
| 0x201000000000044 |
"Failed to set up push endpoint (%FUNC/%s) (%ENDPOINT/%s)" |
| 0x201000000000045 |
"Failed to register endpoint (%FUNC/%s) (%ENDPOINT/%s)" |
| 0x201000000000046 |
"Failed to deregister endpoint (%FUNC/%s) (%ENDPOINT/%s)" |
| 0x201000000000047 |
"Failed to receive interface counters for SNMP." |
| 0x201000000000048 |
"l2_agent published oper enabled leaf after retries count (%COUNT/%d)" |
| 0x201000000000049 |
"l2_agent failed to publish oper enabled leaf after retries count (%COUNT/%d)" |
| 0x201000000000050 |
"Detected DPSM restart (%slotid/%u). Exiting..." |
| 0x201000000000051 |
"l2_agent published oper mru leaf after retries count (%COUNT/%d)" |
| 0x201000000000052 |
"l2_agent failed to publish oper mru leaf after retries count (%COUNT/%d)" |
| 0x201000000000060 |
"Failed to read (%COMP/%s) initial configuration after (%COUNT/%d) retries due to error (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)." |
| 0x201000000000061 |
"Failed to read (%COMP/%s) initial configuration after (%COUNT/%d) retries due to error (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)." |
| 0x202000000000001 |
"failed to create maapi transaction with config daemon (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x202000000000002 |
"maapi_get failed for (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x202000000000003 |
"failed to complete maapi transaction (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x202000000000004 |
"maapi_get failed for (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x202000000000005 |
"maapi_get failed for (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x202000000000006 |
"failed to create session for oper data update (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x202000000000007 |
"maapi_get failed for pgsettings (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x202000000000008 |
"cdb_get failed for pgsettings (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x202000000000009 |
"cdb_set failed for state pgsettings (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x202000000000010 |
"portgroup mode change caused removal of interface (%INTERFACE/%s)" |
| 0x202000000000011 |
"LAG ID delete failed for interface (%IFNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x202000000000012 |
"failed to end session for oper data update (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x202000000000013 |
"cdb_exists failed for oper interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000001 |
"maapi_set failed for portgroup (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%d)" |
| 0x203000000000002 |
"maapi_create failed for portgroup (%PORTGROUP/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000003 |
"maapi_set failed for interface (%INTERFACE/%s) (%ATTRIBUTE/%s) (%PATH/%s) (%LASTERR/%s) (%ERRNOSTR/%d)" |
| 0x203000000000004 |
"maapi_create failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000006 |
"maapi_create failed for vlan (%VID/%d) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000007 |
"maapi_delete failed for portgroup (%PORTGROUP/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000008 |
"maapi_delete failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000009 |
"mac entry (%ENTRY/%s) not found" |
| 0x203000000000010 |
"maapi_delete failed for static fdb entry interface field (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000012 |
"cdb_get failed to get mac for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000013 |
"cdb_get failed to get vlan for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000014 |
"cdb_get failed to get tag-type for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000015 |
"maapi_delete failed for lldp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000016 |
"maapi_delete failed for stp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000017 |
"maapi_delete failed for mstp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000018 |
"maapi_delete failed for rstp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000019 |
"maapi_delete failed for lacp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000020 |
"maapi_delete failed for qos interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000021 |
"maapi_create failed for vlan (%VID/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000022 |
"maapi_create failed for port-mapping (%PORTMAP/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000023 |
"maapi_create failed for port-mapping (%PORTMAP/%s) pipeline (%PIPELINE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000024 |
"maapi_set failed for port-mapping (%PORTMAP/%s) pipeline (%PIPELINE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000025 |
"maapi_delete failed for state port-speed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000026 |
"maapi_delete failed for node (%NODE/%s) state (%STATE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000027 |
"NDIs exhausted..." |
| 0x203000000000028 |
"maapi_get failed for virtual-network ndi-id (%VNET/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000029 |
"maapi_set failed for virtual-network ndi-id (%VNET/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000030 |
"config-restore overwrite of stale ndi-id for virtual-network ndi-id (%VNET/%s) (%NDI/%d)" |
| 0x203000000000031 |
"virtual-network (%VNET/%s) cannot be configured because system reached the max number (%MAX/%d) of supported virtual-networks" |
| 0x203000000000032 |
"maapi_get failed to read virtual-networks for virtual-wire (%VWIRE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000033 |
"maapi_get failed for interface configuration (%INTERFACE/%s) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x203000000000034 |
"cdb_get failed to get subif index (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x204000000000001 |
"fpgaclient failed to register endpoint (%EPTYPE/%d) (%PATH/%s)" |
| 0x204000000000002 |
"fpgaclient failed to deregister endpoint (%PATH/%s)" |
| 0x204000000000003 |
"fpgamgr portgroups do not match the running config portgroups - restart FPGAMGR" |
| 0x204000000000004 |
"fpgaclient expect non null payload" |
| 0x204000000000005 |
"fpgaclient failed to send to ZMQ endpoint address (%ZMQADDRESS/%s)" |
| 0x204000000000006 |
"fpgaclient got no response from FPGAD - timeout" |
| 0x204000000000007 |
"Interface (%INTERFACE/%s) data differ; config: slotid (%CSLOT/%d), pgidx (%PGIDX/%d), iftype (%IFTYPE/%s), ifpgmode (%IFPGMODE/%s), fpga: slotid (%FSLOT/%d), pgidx (%FPGIDX/%d), iftype (%FIFTYPE/%s), ifpgmode (%FIFPGMODE/%s). Exiting..." |
| 0x204000000000008 |
"PG (%PORTGROUP/%s) data differ; config: mode (%CMODE/%d) slotid (%CSLOT/%d) index (%CPGINDEX/%d), fpga: mode (%FMODE/%d) slotid (%FSLOT/%d) index (%FPGINDEX/%d). Exiting..." |
| 0x204000000000009 |
"fpgaclient failed to read alertfd" |
| 0x204000000000010 |
"fpgaclient received interface (%INTERFACE/%s) data: Port (%PORT/%d) PortIdx (%PORTIDX/%d) Speed (%SPEED/%s) ifpgmode (%IFPGMODE/%s)" |
| 0x204000000000012 |
"MAC exhaustion for interface (%INTERFACE/%s). Exiting..." |
| 0x204000000000013 |
"Interface (%INTERFACE/%s) does not exist in the ifmap. Exiting..." |
| 0x204000000000014 |
"Update phyport for interface (%INTERFACE/%s): old (%OLDPORT/%d), new (%NEWPORT/%d)." |
| 0x204000000000015 |
"fpgaclient received portgroup (%NAME/%s) data: Idx (%PGINDEX/%d) Mode (%PGMODE/%s)" |
| 0x204000000000016 |
"PG (%PORTGROUP/%s) does not exist in the pgmap. Exiting..." |
| 0x204000000000017 |
"cdb_get failed to get interface name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x204000000000018 |
"interface (%INTERFACE/%s) not in map, when map not empty. Insert it" |
| 0x204000000000019 |
"pipeline (%PIPELINE/%s) pipeline-group (%PIPELINEGRP/%s) differs from fpga-pipeline-group (%FPGAPIPELINEGRP/%s)" |
| 0x204000000000020 |
"pipeline (%PIPELINE/%s) not found in hardcoded map" |
| 0x204000000000021 |
"Update speed for interface (%INTERFACE/%s): old (%OLDSPED/%s), new (%NEWSPEED/%s)." |
| 0x204000000000022 |
"fpgaclient received interface (%INTERFACE/%s) data: Port-DID (%PORT/%d) Portgroup-Idx (%PGIDX/%d) PipelineGroup (%PipelineGroup/%s) Speed (%SPEED/%s)" |
| 0x204000000000023 |
"fpgaclient received pipeline (%PIPELINE/%s) data: PipelineGroup (%PIPELINEGROUP/%s)" |
| 0x204000000000024 |
"No hwmac received for interface (%INTERFACE/%s)." |
| 0x204000000000025 |
"PG (%PORTGROUP/%s) data differ; config: mode (%CMODE/%d) slotid (%CSLOT/%d) index (%CPGINDEX/%d), fpga: mode (%FMODE/%d) slotid (%FSLOT/%d) index (%FPGINDEX/%d)." |
| 0x204000000000026 |
"PG (%PORTGROUP/%s) does not exist in the pgmap." |
| 0x204000000000027 |
"Interface (%INTERFACE/%s) data differ; config: slotid (%CSLOT/%d), pgidx (%PGIDX/%d), iftype (%IFTYPE/%s), ifpgmode (%IFPGMODE/%s), fpga: slotid (%FSLOT/%d), pgidx (%FPGIDX/%d), iftype (%FIFTYPE/%s), ifpgmode (%FIFPGMODE/%s)." |
| 0x204000000000028 |
"Interface (%INTERFACE/%s) does not exist in the ifmap." |
| 0x204000000000029 |
"Update pg_index for interface (%INTERFACE/%s): old (%OLDPGIDX/%d), new (%NEWPGIDX/%d)." |
| 0x205000000000001 |
"cdb_get failed for PORTGROUP name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000002 |
"cdb_cd failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000003 |
"cdb_get failed for (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000004 |
"unknown operation (%OP/%d)" |
| 0x205000000000006 |
"cdb_set_values failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000007 |
"cdb_get failed for interface (%INTERFACE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000008 |
"cdb_get failed for mac entry (%ENTRY/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000009 |
"cdb_get failed to get chassis-base-mac for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000011 |
"cdb_get failed to get node data (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000012 |
"unknown operation (%OP/%d)" |
| 0x205000000000013 |
"reconstruct mac alloc pool - cdb_get failed to get interface (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000014 |
"cdb_set_values failed for virtual-network state (%VNET/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000015 |
"cdb_get_values failed for virtual-network (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000016 |
"cdb_set_values failed for virtual-wire state (%VWIRE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000017 |
"cdb_get_values failed for virtual-wire (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x205000000000018 |
"This message has been deprecated." |
| 0x205000000000019 |
"This message has been deprecated." |
| 0x205000000000020 |
"cdb_get_values failed for host-endpoint (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x206000000000001 |
"maapi_set_elem failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x206000000000002 |
"maapi_set_elem failed for (%LEAF/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x208000000000001 |
"Failed to send completion reply for component (%COMPONENT/%s)" |
| 0x2101000000000001 |
"Failed to connect confd's control socket." |
| 0x2101000000000002 |
"Failed to initialize SNMP Trap daemon." |
| 0x2101000000000003 |
"confd_register_snmp_notification is failed." |
| 0x2101000000000004 |
"Failed to create socket." |
| 0x2101000000000005 |
"Failed sending (%name/%s) trap to CONFD." |
| 0x2101000000000006 |
"(%PHASE/%s) Retrying Forever." |
| 0x2101000000000007 |
"SNMP Trap Service Starting...(%version/%s) (%date/%s)." |
| 0x2101000000000008 |
"SNMP Trap Service Exiting... (%version/%s) (%date/%s)." |
| 0x2101000000000009 |
"SNMP Trap can't be processed on Subsidary Controller." |
| 0x2101000000000010 |
"Trap Name is missing in the Request." |
| 0x2101000000000011 |
"cdb_get failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)." |
| 0x2101000000000012 |
"cdb_get_values failed with (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)." |
| 0x2101000000000013 |
"Caught Exception (%exception/%s)." |
| 0x2101000000000014 |
"Caught unknown Exception." |
| 0x2101000000000015 |
"Invalid op value (%op/%d)." |
| 0x2101000000000016 |
"Input request is not of AlertRequest type." |
| 0x2201000000000001 |
"Alert Service starting. (%version/%s) (%date/%s)" |
| 0x2201000000000002 |
"Alert Service exiting." |
| 0x2201000000000003 |
"(%func/%s)Alert Service unable to initialize ZMQ" |
| 0x2201000000000004 |
"Failed to register endpoint (%endpoint/%s)" |
| 0x2201000000000005 |
"Failed to deregister endpoint (%endpoint/%s)" |
| 0x2201000000000006 |
"ZMQ Message Server Started. Listening on alert port (%port/%d)" |
| 0x2201000000000007 |
"(%func/%s)Unable to create Alert entry in CDB. (%keypath/%s) (%confd_err/%s) (%confd_errno/%d)" |
| 0x2201000000000008 |
"Unable to delete Alert entry (%keypath/%s) from CDB" |
| 0x2201000000000009 |
"(%func/%s): (%pointer/%s) is NULL)" |
| 0x2201000000000010 |
"(%func/%s) Controller State is not Active or Standby. State = (%state/%s)" |
| 0x2201000000000011 |
"(%func/%s) Alert source is empty." |
| 0x2201000000000012 |
"(%func/%s) Unable to clear Alert {(%alm_id/%s) (%resource/%s)}" |
| 0x2201000000000013 |
"(%func/%s) confd_errstr (%errstr/%s), confd_errno: (%errno/%d)" |
| 0x2201000000000014 |
"(%func/%s) Unable to end confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x2201000000000016 |
"(%func/%s)Failed to get protobuf size." |
| 0x2201000000000017 |
"(%func/%s)ZMQ failed to allocate message length. (%msg_len/%d)" |
| 0x2201000000000018 |
"(%func/%s)Failed to send reply (%endpoint/%s)" |
| 0x2201000000000019 |
"(%func/%s)cdb_get failed. (%KEYPATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x2201000000000020 |
"(%func/%s)Unknown Alarm Yang Severity. (%yangSeverity/%d)" |
| 0x2201000000000021 |
"(%func/%s)Sending (%ACTION/%s). (%source/%s) (%severity/%d) (%dest/%s)" |
| 0x2201000000000022 |
"(%func/%s)Sending POST_LOP_OBJECT_LED_STATUS_RESET (%dest/%s)" |
| 0x2201000000000023 |
"(%func/%s)Failed to get protobuf size." |
| 0x2201000000000024 |
"(%func/%s)ConfD is not ready." |
| 0x2201000000000025 |
"(%func/%s)zmq poll item list is NULL." |
| 0x2201000000000026 |
"(%func/%s) (%ALERT_ID/%s) " |
| 0x2201000000000027 |
"Received alert assert. (%alert/%s)" |
| 0x2201000000000028 |
"Received alert clear. (%alert/%s)" |
| 0x2201000000000029 |
"Received event. (%event/%s)" |
| 0x2201000000000030 |
"ZMQ pull payload is null." |
| 0x2201000000000031 |
"Failed to create (%PATH/%s)" |
| 0x2201000000000032 |
"Failed to push ZMQ message." |
| 0x2201000000000034 |
"Unable to remove events file (%FILE/%s)." |
| 0x2201000000000035 |
"Failed to send ZMQ message." |
| 0x2201000000000036 |
"Failed to add ZMQ payload message." |
| 0x2201000000000037 |
"Recieved chassis alarm on standby controller. (%source/%s)" |
| 0x2201000000000038 |
"Processing LED status. (%message/%s)" |
| 0x2201000000000039 |
"Invalid controller slot. (%source/%s)" |
| 0x2201000000000040 |
"Received alert clear-all. (%alert/%s)" |
| 0x2201000000000041 |
"zmq poll error. (%error/%s) (%errno/%d)" |
| 0x2601000000000001 |
"unable to verify platform-hal at startup" |
| 0x2601000000000002 |
"unable to get platform hal host-type" |
| 0x2601000000000003 |
"unable to get platform hal slot id" |
| 0x2601000000000004 |
"unable to get platform hal node name" |
| 0x2601000000000005 |
"unable to open agent.db, using in-memory DB" |
| 0x2601000000000006 |
"unable to get platform information" error=%v |
| 0x2601000000000007 |
"unable to create ZMQ Publisher" error=%v |
| 0x2601000000000008 |
"unable to start ZMQ Publisher" error=%v |
| 0x2601000000000009 |
"unable to communicate with monitoring agent" |
| 0x260100000000000a |
"criteria container initialization error" |
| 0x260100000000000b |
"diag-agent starting" version=%v build_date=%v |
| 0x260100000000000c |
"unable to query initial appliance module present status" error=%v |
| 0x260100000000000d |
"unable to get the list of drives from platform hal" error=%v |
| 0x260100000000000e |
"unable to get slot number of the drive from platform hal" error=%v |
| 0x260100000000000f |
"unable to update appliance module present status" error=%v component=%v present=%v |
| 0x2601000000000010 |
"unable to update BMC analog alert attribute" component=%v attribute=%v error=%v |
| 0x2601000000000011 |
"unable to update BMC discrete alert attribute" component=%v attribute=%v error=%v |
| 0x2601000000000012 |
"unable to find component" component=%v |
| 0x2601000000000013 |
"unable to initialize psu manager" error=%v |
| 0x2601000000000014 |
"unable to start task" name=%v error=%v |
| 0x2601000000000015 |
"unknown lcd sensor" data=%v |
| 0x2601000000000016 |
"unable to start session in ConfD" subscriber=%v error=%v |
| 0x2601000000000017 |
"unable to get value list from ConfD" subscriber=%v error=%v |
| 0x2601000000000018 |
"unable to set value in ConfD" subscriber=%v error=%v |
| 0x2601000000000019 |
"unable to set value Firmware Update Status" key_path=%v error=%v |
| 0x260100000000001a |
"unable to find Optic Port Component" port=%v task=%v |
| 0x260100000000001b |
"unable to find FPGA PCIe Component" name=%v task=%v |
| 0x260100000000001c |
"unable to get element for sensor call-point" call_point=%v key_path=%v component=%v error=%v |
| 0x260100000000001d |
"unable to update disk capacity criteria " component=%v attribute=%v limit=%v |
| 0x260100000000001e |
"unable to update disk growth rate criteria " component=%v attribute=%v |
| 0x260100000000001f |
"Unable to get platform options from platform-hal" |
| 0x2601000000000020 |
"FIPS card exceeds alert temperature threshold" temperature=%d units=%v |
| 0x2601000000000021 |
"FIPS card temperature limit exceeded, shutting down" |
| 0x2601000000000022 |
"FIPS card temperature limit exceeded. System powered off." |
| 0x2601000000000023 |
"Failed to shutdown system for FIPS over temperature, retrying" error=%v |
| 0x2601000000000024 |
"Failed to shutdown system for FIPS over temperature" |
| 0x2601000000000025 |
"unable to write PEL entry" error=%v |
| 0x2601000000000026 |
"unable to set AOM ssh username and password" |
| 0x2601000000000027 |
"unable to clear AOM customer data" |
| 0x2601000000000028 |
"unable to read AOM network configuration" |
| 0x2601000000000029 |
"unable to set AOM network configuration" |
| 0x260100000000002a |
"unable to read AOM SSH login banner" |
| 0x260100000000002b |
"unable to set AOM SSH login banner" |
| 0x260100000000002c |
"unable to read AOM SSH configuration" |
| 0x260100000000002d |
"unable to set AOM SSH configuration" |
| 0x260100000000002e |
"failed to read BIOS public key" error=%v |
| 0x260100000000002f |
"failed to read BIOS capabilities" error=%v |
| 0x2601000000000030 |
"failed to update drive path" error=%v |
| 0x2601000000000031 |
"drive does not support opal specification" spec=%v |
| 0x2601000000000032 |
"drive slot does not contain nvme string" slot=%v str=%v |
| 0x2601000000000033 |
"failed to get drive status for path from sed" path=%v error=%v |
| 0x2601000000000034 |
"failed to write management configuration to UEFI" error=%v |
| 0x2601000000000035 |
"failed to parse CA certificate required for full disk encryption" |
| 0x2601000000000036 |
"failed to load certificate required for full disk encryption" error=%v |
| 0x2601000000000037 |
"no KMIP endpoints configured" |
| 0x2601000000000038 |
"failed to encrypt KMIP configuration" error=%v |
| 0x2601000000000039 |
"failed to write KMIP configuration to UEFI" error=%v |
| 0x260100000000003a |
"drive encryption has started" |
| 0x260100000000003b |
"error occurred while enabling drive encryption" error=%v |
| 0x260100000000003c |
"drive decryption has started" |
| 0x260100000000003d |
"error occurred while disabling drive encryption" error=%v |
| 0x260100000000003e |
"failed to schedule cron job" error=%v |
| 0x260100000000003f |
"stopping cron job since periodic rotation interval is set to 0" |
| 0x2601000000000040 |
"writing management configuration to UEFI" config=%v |
| 0x2601000000000041 |
"KMIP server has unsupported version" server=%v version=%v |
| 0x2601000000000042 |
"failed to retrieve attributes of the key object" server=%v error=%v |
| 0x2601000000000043 |
"stopping previous cron job and rescheduling the new cron job" |
| 0x2601000000000044 |
"disk encryption manager scheduled cron job triggered at UTC time" time=%v |
| 0x2601000000000045 |
"error occurred during key rotation" error=%v |
| 0x2601000000000046 |
"failed to report status to confd" error=%v |
| 0x2601000000000047 |
"failed to reschedule the cron job" error=%v |
| 0x2601000000000048 |
"error adding the cron job" error=%v |
| 0x2601000000000049 |
"cron job scheduled successfully with expression at current UTC time" expression=%v time=%v |
| 0x260100000000004a |
"rolling back encryption since failure occurred on one of the drives" |
| 0x260100000000004b |
"successfully rolled back encryption on drives" |
| 0x260100000000004c |
"checking opal status for drive" drive=%v status=%v |
| 0x260100000000004d |
"working on drive and its current locking status" drive=%v status=%v |
| 0x260100000000004e |
"drive already locked" drive=%v |
| 0x260100000000004f |
"failed to encrypt drive" drive=%v error=%v |
| 0x2601000000000050 |
"drive locked successfully" drive=%v |
| 0x2601000000000051 |
"drives encrypted successfully" |
| 0x2601000000000052 |
"failed to connect to the endpoint, trying next endpoint" endpoint=%v error=%v |
| 0x2601000000000053 |
"failed to create and activate key object at endpoint, trying next endpoint" endpoint=%v error=%v |
| 0x2601000000000054 |
"failed to retrieve attributes of the key object from endpoint, trying next endpoint" endpoint=%v error=%v |
| 0x2601000000000055 |
"failed to retrieve key value from endpoint, trying next endpoint" endpoint=%v error=%v |
| 0x2601000000000056 |
"failed to write encryption details to UEFI" error=%v |
| 0x2601000000000057 |
"drive already unlocked" drive=%v |
| 0x2601000000000058 |
"failed to decrypt drive" drive=%v error=%v |
| 0x2601000000000059 |
"drive unlocked successfully" drive=%v |
| 0x260100000000005a |
"drives decrypted and unlocked successfully" |
| 0x260100000000005b |
"failed to revoke and destroy key object" endpoint=%v error=%v |
| 0x260100000000005c |
"disk encryption is disabled so stopping the cron service" |
| 0x260100000000005d |
"failed to rotate encryption key for drive" drive=%v error=%v |
| 0x260100000000005e |
"disk encryption key rotated successfully for drive" drive=%v |
| 0x260100000000005f |
"drives re-encrypted and locked successfully" |
| 0x2601000000000060 |
"failed to rekey new key object on endpoint, trying next endpoint" endpoint=%v error=%v |
| 0x2601000000000061 |
"failed to revoke and destroy old key object on endpoint, trying next endpoint" endpoint=%v error=%v |
| 0x2601000000000062 |
"disk encryption key rotation has started" |
| 0x2601000000000063 |
"on-drive-present event received" |
| 0x2601000000000064 |
"locking/unlocking is not supported for the drive" drive=%v |
| 0x2601000000000065 |
"drive-remove event received" |
| 0x2601000000000066 |
"executing disk encryption initialization sequence" |
| 0x2601000000000067 |
"BIOS failed to decrypt the drive on boot" drive=%v |
| 0x2601000000000068 |
"failed to decrypt the drive inserted, can not used in this system" drive=%v error=%v |
| 0x2601000000000069 |
"failed to encrypt the drive inserted, can not used in this system" drive=%v error=%v |
| 0x260100000000006a |
"failed to update locking state for the drive" drive=%v error=%v |
| 0x260100000000006b |
"generated cron schedule will trigger at UTC time" expr=%v time=%v |
| 0x260100000000006c |
"stream generator is not running" |
| 0x260100000000006d |
"stream generator startup task action error" address=%s key=%s parameters=%s |
| 0x260100000000006e |
"stream generator startup task action error message" kw=# |
| 0x260100000000006f |
"adding vlan to port" vlan=%d port=%d |
| 0x2601000000000070 |
"error with key-value pairs" error=%s |
| 0x2601000000000071 |
"action error details" address=%s key=%s kw=# |
| 0x2601000000000072 |
"stream generator has no stream" key=%s |
| 0x2601000000000073 |
"stream generator task action error" address=%s key=%s parameters=%s |
| 0x2601000000000074 |
"stream generator task error message" kw=# |
| 0x2601000000000075 |
"stream generator oracle component update" component=%s health=%s severity=%s |
| 0x2601000000000076 |
"stream generator oracle component attribute update" component=%s attribute=%s value=%s health=%s severity=%s |
| 0x2601000000000077 |
"unable to evaluate BMC attribute" attribute=%s error=%s |
| 0x2601000000000078 |
"error fetching BMC health status" error=%s |
| 0x2601000000000079 |
"unable to evaluate BMC self test status attribute" attribute=%s error=%s |
| 0x260100000000007a |
"Platform HAL error querying QAT devices" error=%s |
| 0x260100000000007b |
"platform is not supported" platform=%s |
| 0x260100000000007c |
"Platform HAL error querying PCI devices" slot_id=%s error=%s |
| 0x260100000000007d |
"functional bit file is not loaded" |
| 0x260100000000007e |
"Platform HAL error querying FPGA devices" error=%s |
| 0x260100000000007f |
"Platform HAL error querying PCI devices for slot" slot_id=%s error=%s |
| 0x2601000000000080 |
"error fetching system drives list" error=%s |
| 0x2601000000000081 |
"Platform HAL error fetching system drives status" error=%s |
| 0x2601000000000082 |
"Platform HAL error fetching nvme info" device=%s error=%s |
| 0x2601000000000083 |
"failed to find drive device" device=%s |
| 0x2601000000000084 |
"error querying fan tray module present status" error=%s |
| 0x2601000000000085 |
"error querying fan faults" error=%s |
| 0x2601000000000086 |
"unable to find component while querying fan fault" component=%s |
| 0x2601000000000087 |
"unable to find attribute data while querying fan fault" attribute=%s |
| 0x2601000000000088 |
"error evaluating fan attribute" attribute=%s error=%s |
| 0x2601000000000089 |
"unable to find attribute data while querying fans power fault" attribute=%s |
| 0x260100000000008a |
"error querying fan speed sensor" fan=%d error=%s |
| 0x260100000000008b |
"unable to find component while querying fan speed sensor" component=%s fan=%d |
| 0x260100000000008c |
"unable to find attribute data while querying fan speed sensor" attribute=%s fan=%d |
| 0x260100000000008d |
"error fetching drives in system" error=%s |
| 0x260100000000008e |
"error fetching drive SMART attributes" error=%s |
| 0x260100000000008f |
"error checking LOP health" error=%s |
| 0x2601000000000090 |
"error checking LOP health status" error=%s |
| 0x2601000000000091 |
"error fetching IPMI bus health status" error=%s |
| 0x2601000000000092 |
"stream creation error" dm=%d error=%s |
| 0x2601000000000093 |
"stream component creation error" dm=%d error=%s |
| 0x2601000000000094 |
"unable to get stream info" stream_id=%s |
| 0x2601000000000095 |
"create stream parameters" parameters=%s |
| 0x2601000000000096 |
"configuring PHY loopback mode" port=%s enabled=%v |
| 0x2601000000000097 |
"unable to find SEP component" |
| 0x2601000000000098 |
"unable to update SEP attribute" |
| 0x2601000000000099 |
"unable to find DMA DM component" |
| 0x260100000000009a |
"unable to update DMA attribute" |
| 0x260100000000009b |
"unable to find DMA DM component for stats" |
| 0x260100000000009c |
"unable to update DMA attribute for stats" |
| 0x260100000000009d |
"SEP adding vlan to port" vlan=%d port=%d |
| 0x260100000000009e |
"SEP removing vlan from port" vlan=%d port=%d |
| 0x260100000000009f |
"filesystem error fetching drives in system" error=%s |
| 0x26010000000000a0 |
"filesystem error fetching drive SMART attributes" error=%s |
| 0x26010000000000a1 |
"filesystem error performing drive test" error=%s |
| 0x26010000000000a2 |
"filesystem drive test failed" error=%s |
| 0x26010000000000a3 |
"filesystem error fetching drives list" error=%s |
| 0x26010000000000a4 |
"filesystem error fetching SMART attributes" error=%s |
| 0x26010000000000a5 |
"error deleting drive performance test files" error=%s |
| 0x26010000000000a6 |
"unable to query initial appliance module present status" |
| 0x26010000000000a7 |
"failed to get VLAN ID from AOM network config" error=%s |
| 0x26010000000000a8 |
"disk encryption startup sequence failed: unable to retrieve encryption key: %s" error=%s |
| 0x26010000000000a9 |
"failed to update enabled state during startup" error=%v |
| 0x301000000000001 |
"---===[ FPGA Manager Starting ]===--- (%Version/%s) (%Date/%s)" |
| 0x301000000000002 |
"ZMQ Message Server Started. Listening on (%hipri/%d) (%lowpri/%d)" |
| 0x301000000000003 |
"Failed to register endpoint (%endpoint/%s)" |
| 0x301000000000004 |
"Failed to deregister endpoint (%endpoint/%s)" |
| 0x301000000000005 |
"Failed to send reply (%endpoint/%s)" |
| 0x301000000000006 |
"SDK error during programming. (%API/%s) (%pgi/%d) (%error/%s)" |
| 0x301000000000007 |
"SDK error during device programming. (%API/%s) (%code/%d) (%error/%s)" |
| 0x301000000000008 |
"Error initializing ATSE/HDP - exiting!" |
| 0x301000000000009 |
"Error during tmstat operation. (%API/%s) (%TBLNAME/%s) (%error/%s)" |
| 0x301000000000010 |
"Initializing ATSE HDP (%name/%s) (%version/%s) (%date/%s)" |
| 0x301000000000011 |
"Worker thread started". |
| 0x301000000000012 |
"Timeout waiting for response from FWUpdater". |
| 0x301000000000013 |
"FWU response error. (%error_code/%d) (%message/%s)" |
| 0x301000000000014 |
"Error reading ATSE bitstream version." |
| 0x301000000000015 |
"Error reading VQF bitstream version." |
| 0x301000000000016 |
"Error loading FPGA bitstreams. Aborting!" |
| 0x301000000000017 |
"Loading ATSE FPGA" |
| 0x301000000000018 |
"Loading VQF FPGA" |
| 0x301000000000019 |
"Error attaching to FPGA devices - Exiting!" |
| 0x301000000000020 |
"Hardware Config: (%Slot/%d) (%Lifecycle/%s) (%ATSEs/%d) (%VQFs/%d) (%PortGroups/%d) (%HostType/%s)" |
| 0x301000000000021 |
"Error reading Platform-Config from HAL: exiting!" |
| 0x301000000000022 |
"Error initializing FZMQ library: exiting!" |
| 0x301000000000023 |
"Error creating statistics timer. (%ERRORNO/%d) (%ERROR/%s)" |
| 0x301000000000024 |
"Error arming statistics timer. (%ERRORNO/%d) (%ERROR/%s)" |
| 0x301000000000025 |
"Unsupported bit stream for portgroup config - defaulting to standard. (%CONFIG/%s)" |
| 0x301000000000026 |
"Bad command line argument" |
| 0x301000000000027 |
"Error reading Platform Info from HAL. (%ITEM/%s)" |
| 0x301000000000028 |
"Unknown HostType from HAL. (%HOST/%s)" |
| 0x301000000000029 |
"F5SW SDK (%VERSION/%s)" |
| 0x301000000000031 |
"FPGA update status: (%FPGA/%s) (%STATUS/%s)" |
| 0x301000000000032 |
"Portgroup config matched. (%VARIANT/%s)" |
| 0x301000000000033 |
"Portgroup configuration: (%PORTGROUP/%d) (%CONFIG/%s)" |
| 0x301000000000034 |
"Timeout waiting for response from FWUpdater, will retry (%TIMEOUT/%d) (%RETRIES/%d)". |
| 0x301000000000037 |
"Loading FPGA bitstream. (%FPGA/%s)" |
| 0x301000000000038 |
"Initializing FPGA (%name/%s) (%version/%s) (%date/%s)" |
| 0x301000000000039 |
"Error initializing internal FPGA links - Exiting!"); |
| 0x301000000000040 |
"FPGA link initialization thread started." |
| 0x301000000000041 |
"FPGA link initialization complete." |
| 0x301000000000042 |
"Internal link initialization failure between FPGAs. (%FPGAs/%s) |
| 0x301000000000043 |
"VQF FPGA not found." |
| 0x301000000000044 |
"SDK port error during programming. (%API/%s) (%port/%s) (%error/%s)" |
| 0x301000000000045 |
"SDK socket error during programming. (%API/%s) (%skt/%d) (%error/%s)" |
| 0x301000000000046 |
"SDK DID error during programming. (%API/%s) (%did/%d) (%error/%s)" |
| 0x301000000000047 |
"SDK MAC error during programming. (%API/%s) (%mac/%d) (%error/%s)" |
| 0x301000000000048 |
"Error initializing interface manager - exiting!" |
| 0x301000000000049 |
"Error initializing link manager - exiting!" |
| 0x301000000000050 |
"Error initializing NSE L2 manager - exiting!" |
| 0x301000000000051 |
"Unexpected optics object defined on optic insertion, deleting (%PORTGROUP/%s)" |
| 0x301000000000052 |
"Portgroup publishing not ready (%PORTGROUP/%s) (%LOCATION/%s)" |
| 0x301000000000053 |
"Interface counter reset (%INTERFACE/%s) " |
| 0x301000000000054 |
"Media-side FEC is disabled for optic (%PORTGROUP/%s) (%PARTNUM/%s)" |
| 0x301000000000055 |
"Setting has BE2 state (%state/%s)" |
| 0x301000000000056 |
"Unable to parse top-level ZMQ message (%error/%s)" |
| 0x301000000000057 |
"Did not parse null ZMQ message (%func/%s)" |
| 0x301000000000058 |
"Unable to parse ZMQ message (%func/%s)" |
| 0x302000000000001 |
"cdb_set failed for (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000002 |
"Unable to start confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000003 |
"Failed to create CDB component (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000004 |
"cdb_set failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000005 |
"cdb_get failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000006 |
"cdb if_iter unexpected op (%OP/%d)" |
| 0x302000000000007 |
"Error processing vlan-listener object update. (%OPER/%s) (%INTERFACE/%s) (%VLAN/%d)" |
| 0x302000000000008 |
"cdb_get failed for (%TENANT/%s) (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000009 |
"Failed to delete CDB component (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000010 |
"Failed to find CDB component (%COMPONENT/%s)" |
| 0x302000000000011 |
"Unexpected STP configuration. (%DESCRIPTION/%s)" |
| 0x302000000000012 |
"Unable to start confD transaction. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000013 |
"Unable to complete confD transaction. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000014 |
"Bad port_adjust. (%PORT_ADJUST/%d)" |
| 0x302000000000015 |
"cdb_cd failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000016 |
"Could not find tracked instance for tenant (%TENANT/%s) (%SLOT/%d)" |
| 0x302000000000017 |
"Error processing port-listener object update. (%OPER/%s) (%INTERFACE/%s)" |
| 0x302000000000018 |
"Setting FPGA_STATE. (%STATE/%s)" |
| 0x302000000000019 |
"No HDP unit found (%TENANT/%s) (%SLOT/%d) (%INSTANCE/%d) (%DID/%x)" |
| 0x302000000000020 |
"CDB function failed, retrying after delay (%DESCRIPTION/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000021 |
"CDB function success after retries (%DESCRIPTION/%s) (%RETRIES/%d)" |
| 0x302000000000022 |
"Not creating existing CDB subscribers (%SUBSCRIBER/%s)" |
| 0x302000000000023 |
"Failed to read portgroup mode from CDB (%PORTGROUP/%d) (%retries/%d)" |
| 0x302000000000024 |
"cdb_exists failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000025 |
"CDB function failed, not retrying (%DESCRIPTION/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x302000000000026 |
"L2 tenant service instance configuration: (%state/%s) (%message/%s)" |
| 0x303000000000001 |
"This message has been deprecated." |
| 0x303000000000002 |
"Optical tuning will not be applied - unknown hardware platform. (%ifname/%s) (%platform/%s)" |
| 0x303000000000003 |
"Timeout waiting for response from optics-mgr". |
| 0x303000000000004 |
"Error applying optical tuning. (%ifname/%s) (%page/%u) (%addr/%u) (%tuneval/%u)". |
| 0x303000000000005 |
"Optic inserted (%Portgroup/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s) (%Serial/%s)" |
| 0x303000000000006 |
"Optic REMOVED. (%Portgroup/%d)" |
| 0x303000000000007 |
"Failure to apply power to optic - device is unusable. (%portgroup/%s) (%socket/%d)" |
| 0x303000000000008 |
"Unable to read optic EEPROM - device is unusable. (%portgroup/%s) (%socket/%d)" |
| 0x303000000000009 |
"Failure to remove power from optic. (%portgroup/%s) (%socket/%d)" |
| 0x303000000000010 |
"Failure to enable high power mode for optic - device is unusable. (%portgroup/%s) (%socket/%d)" |
| 0x303000000000011 |
"FEC is configured (%ifname/%s) (%supported/%s) (%state/%s)" |
| 0x303000000000013 |
"Unsupported SFP+/SFP28 Optic (%portgroup/%d)" |
| 0x303000000000014 |
"Optic REMOVED. (%Portgroup/%s)" |
| 0x303000000000015 |
"Optic inserted does not match portgroup mode configuration (%portgroup/%s) (%mode/%s) (%media/%s)" |
| 0x303000000000017 |
"Unsupported QSFP Optic (%portgroup/%d)" |
| 0x303000000000018 |
"Setting multi-rate optic to 100G (%portgroup/%s) (%media/%s)" |
| 0x303000000000019 |
"Setting multi-rate optic to 40G (%portgroup/%s) (%media/%s)" |
| 0x303000000000020 |
"Setting multi-rate optic to 25G (%portgroup/%s) (%media/%s)" |
| 0x303000000000021 |
"Setting multi-rate optic to 10G (%portgroup/%s) (%media/%s)" |
| 0x303000000000023 |
"Error unlocking the OPT-0052 EEPROM. (%ifname/%s)". |
| 0x303000000000024 |
"This message has been deprecated". |
| 0x303000000000025 |
"Error updating the CTLE mapping register in the OPT-0052 EEPROM. (%ifname/%s)". |
| 0x303000000000026 |
"Error reading back the CTLE mapping register in the OPT-0052 EEPROM. (%ifname/%s)". |
| 0x303000000000027 |
"Bad value read back from the CTLE mapping register in the OPT-0052 EEPROM. (%ifname/%s) (%value/%x)". |
| 0x303000000000028 |
"Error updating the pseudo revision register in the OPT-0052 EEPROM. (%ifname/%s)". |
| 0x303000000000029 |
"Error reading back the pseudo revision register in the OPT-0052 EEPROM. (%ifname/%s)". |
| 0x303000000000030 |
"Bad value read back from the pseudo revision register in the OPT-0052 EEPROM. (%ifname/%s) (%value/%x)". |
| 0x303000000000031 |
"Innolight OPT-0052 is up to date (%ifname/%s)". |
| 0x303000000000032 |
"Innolight OPT-0052 updated successfully (%ifname/%s)". |
| 0x303000000000033 |
"Innolight OPT-0052 update failed (%ifname/%s)". |
| 0x303000000000034 |
"Error reading Optic Ready state information in the QSFP DD EEPROM". |
| 0x303000000000035 |
"Innolight OPT-0046 Rev 5C, is up to date (%ifname/%s)". |
| 0x303000000000036 |
"Innolight OPT-0046 Rev 5C, updated successfully (%ifname/%s)". |
| 0x303000000000037 |
"Innolight OPT-0046 Rev 5C, update failed (%ifname/%s)". |
| 0x303000000000038 |
"Optic not initialized, unplug and re-install. (%portgroup/%s) (%socket/%d)" |
| 0x303000000000039 |
"Timeout waiting for I2C Ready from optic (%portgroup/%s) (%socket/%d)". |
| 0x304000000000001 |
"DDM not supported by this optic. (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000002 |
"DDM is supported by this optic. (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000003 |
"DDM thresholds are not supported by this optic. (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000004 |
"DDM not implemented for this identifier type. (%identifier/%d) (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000005 |
"DDM has no thresholds for this transceiver, DDM not supported. (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000006 |
"DDM high alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000007 |
"DDM high alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000008 |
"DDM high warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000009 |
"DDM high warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000010 |
"DDM low alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000011 |
"DDM low alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000012 |
"DDM low warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000013 |
"DDM low warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f)" |
| 0x304000000000014 |
"DDM I2C error reading channel monitoring values (%PORTGROUP/%s)" |
| 0x304000000000015 |
"DDM high alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000016 |
"DDM high alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000017 |
"DDM high warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000018 |
"DDM high warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000019 |
"DDM low alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000020 |
"DDM low alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000021 |
"DDM low warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000022 |
"DDM low warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%IMMEDIATE/%d)" |
| 0x304000000000023 |
"DDM polling disabled (%PORTGROUP/%s)" |
| 0x304000000000024 |
"DDM polling frequency modified (%PORTGROUP/%s) (%FREQUENCY/%u)" |
| 0x304000000000025 |
"DDM not implemented for this optic. (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000026 |
"Transmit disable is not supported for optic (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000030 |
"DDM high alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000031 |
"DDM high alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000032 |
"DDM high warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) " |
| 0x304000000000033 |
"DDM high warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000034 |
"DDM low alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000035 |
"DDM low alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000036 |
"DDM low warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000037 |
"DDM low warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f)" |
| 0x304000000000038 |
"DDM is supported by this optic, but polling is disabled. (%PORTGROUP/%s) (%Vendor/%s) (%PartNum/%s) (%Rev/%s)" |
| 0x304000000000039 |
"DDM encountered unknown alarm/warn value (%PORTGROUP/%s) (%ALARMTYPE/%d)" |
| 0x304000000000040 |
"DDM high alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000041 |
"DDM high alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000042 |
"DDM high warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000043 |
"DDM high warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000044 |
"DDM low alarm set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000045 |
"DDM low alarm clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000046 |
"DDM low warning set (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x304000000000047 |
"DDM low warning clear (%PORTGROUP/%s) (%ALARMTYPE/%s) (%LANE1/%f) (%LANE2/%f) (%LANE3/%f) (%LANE4/%f) (%LANE5/%f) (%LANE6/%f) (%LANE7/%f) (%LANE8/%f)" |
| 0x305000000000001 |
"Error retrieving VQF version." |
| 0x305000000000002 |
"Error retrieving VQF Op Mode." |
| 0x305000000000003 |
"Error retrieving VQF Enable value." |
| 0x305000000000004 |
"Error initializing VQF - exiting!" |
| 0x305000000000005 |
"VoQ programmed (%blade/%d) (%port/%d) (%module/%s) (%state/%s)" |
| 0x305000000000006 |
"VqfDev called with argument out of range. (%method/%s) (%argument/%s) (%value/%s)" |
| 0x305000000000007 |
"VQF EMM Watchdog. (%slot/%d)" |
| 0x305000000000008 |
"VQF IMM Watchdog. (%slot/%d) (%port/%d)" |
| 0x305000000000009 |
"VQF EMM Watchdog Resolved. (%slot/%d)" |
| 0x305000000000010 |
"VQF IMM Watchdog Resolved. (%slot/%d) (%port/%d)" |
| 0x305000000000011 |
"VQF interface link state (%ifname/%s) (%state/%s)" |
| 0x305000000000012 |
"VOQ Configuration Error. (%ERROR/%s)" |
| 0x305000000000013 |
"Bad VQF PLL status, reloading VQF (%value/%x)" |
| 0x305000000000014 |
"Optimizing system controller backplane links." |
| 0x305000000000015 |
"Could not establish backplane link with one or more system controllers" |
| 0x305000000000016 |
"Loaded VQF FPGA (%MACC_LINK_STT/%x)" |
| 0x305000000000017 |
"VoQ window error (%slot/%d) (%port/%d)" |
| 0x305000000000018 |
"VoQ window error cleared (%slot/%d) (%port/%d)" |
| 0x305000000000019 |
"VQF failover condition on backplane link (%link/%d)" |
| 0x305000000000020 |
"VQF failover condition recovered on backplane link (%link/%d)" |
| 0x305000000000021 |
"Adding slot to VQF database set (%slot/%d)" |
| 0x305000000000022 |
"Removing slot from VQF database set (%slot/%d)" |
| 0x305000000000023 |
"Enabling VQF synchronization with slot (%slot/%d)" |
| 0x305000000000024 |
"Slot activation status updated in VQF (%slot/%d) (%status/%d)" |
| 0x305000000000025 |
"Slot out of range during VQF activate write (%slot/%d)" |
| 0x305000000000026 |
"Slot out of range during VQF activate read (%slot/%d)" |
| 0x305000000000027 |
"VQF remote slot update (%slot/%d) (%ports/%s)" |
| 0x305000000000028 |
"VQF remote slot delete (%slot/%d)" |
| 0x305000000000029 |
"VQF using Marvell CRC mode" |
| 0x305000000000030 |
"VQF BP link Phy reset masking mode (%link/%d) (%state/%s)" |
| 0x305000000000031 |
"VQF PLL status bit not set: (%bit_name/%s)" |
| 0x305000000000032 |
"VQF Watchdogs (%slot/%d)" |
| 0x305000000000033 |
"All VQF Watchdogs Resolved" |
| 0x306000000000001 |
"Modified port IFH config (%port/%d) (%field/%s) (%value/%d)" |
| 0x306000000000002 |
"Error modifying vlan config on port. (%PORT/%d) (%VLAN/%d)" |
| 0x306000000000003 |
"Error adding port to LAG. (%BLADE/%d) (%PORT/%d) (%LAG/%s)" |
| 0x306000000000004 |
"Error adding LAG to Native VLAN, LAG not found. (%LAG/%s)" |
| 0x306000000000005 |
"Error adding LAG to Trunk VLAN(s), LAG not found. (%LAG/%s)" |
| 0x306000000000006 |
"Error adding LAG Member to Native VLAN. (%LAG/%s) (%PORT/%d) (%VLAN/%d)" |
| 0x306000000000007 |
"Error adding LAG Member to Trunk VLAN. (%LAG/%s) (%PORT/%d) (%VLAN/%d)" |
| 0x306000000000008 |
"Error deleting LAG Member from Native VLAN. (%LAG/%s) (%PORT/%d) (%VLAN/%d)" |
| 0x306000000000009 |
"Error deleting LAG Member from Trunk VLANs. (%LAG/%s) (%PORT/%d)" |
| 0x306000000000010 |
"Error removing port from LAG. (%REASON/%s) (%BLADE/%d) (%PORT/%d) (%LAG/%s)" |
| 0x306000000000011 |
"Error modifying vlan config on LAG. (%LAG/%s) (%PORT/%d) (%VLAN/%d)" |
| 0x306000000000012 |
"STP configuration error. (%DESCRIPTION/%s)" |
| 0x306000000000013 |
"L2 Control Protocol Invalid Type. (%TYPE/%d)" |
| 0x306000000000014 |
"Error creating LAG. (%REASON/%s) (%LAG/%s)" |
| 0x306000000000015 |
"Error deleting LAG. (%REASON/%s) (%LAG/%s)" |
| 0x306000000000016 |
"Unable to set STP VLAN state, VLAN is not configured for the interface. (%VLAN/%d) (%INTERFACE/%s)" |
| 0x306000000000017 |
"Unsupported DID size received from DAG library. (%DID_SIZE/%d)" |
| 0x306000000000018 |
"CosQ Meter Configuration for VTC out of range. (%METER_GROUP/%d) (%VTC/%d)" |
| 0x306000000000019 |
"CosQ PMQ vlan priority value out of range. (%PORT/%d) (%PRIORITY/%d)" |
| 0x306000000000020 |
"CosQ PMQ vlan priority VTC value out of range. (%PORT/%d) (%PRIORITY/%d) (%VTC/%d)" |
| 0x306000000000021 |
"CosQ PMQ DSCP value out of range. (%PORT/%d) (%DSCP/%d)" |
| 0x306000000000022 |
"CosQ PMQ DSCP VTC value out of range. (%PORT/%d) (%DSCP/%d) (%VTC/%d)" |
| 0x306000000000023 |
"VLAN is not configured on LAG, ignoring. (%VLAN/%d) (%LAG/%s)" |
| 0x306000000000024 |
"Adding Native VLAN to Port. (%IFNAME/%s) (%PORT/%d) (%VID/%d)" |
| 0x306000000000025 |
"Deleting Native VLAN from Port. (%PORT/%d) (%VID/%d)" |
| 0x306000000000026 |
"Adding LAG Members to Native VLAN. (%LAG/%s) (%MEMBERS/%s) (%VLAN/%d)" |
| 0x306000000000027 |
"Deleting LAG Members from Native VLAN. (%LAG/%s) (%MEMBERS/%s) (%VLAN/%d)" |
| 0x306000000000028 |
"Adding Port to Trunk VLAN. (%PORT/%d) (%VLAN/%s)" |
| 0x306000000000029 |
"Deleting Port from Trunk VLAN. (%PORT/%d) (%VLAN/%s)" |
| 0x306000000000030 |
"Adding LAG Members to Trunk VLANs. (%LAG/%s) (%MEMBERS/%s) (%VLAN/%s)" |
| 0x306000000000031 |
"Deleting LAG Members from Trunk VLANs. (%LAG/%s) (%MEMBERS/%s) (%VLAN/%s)" |
| 0x306000000000032 |
"Error updating DLS entry fields. (%DID/%d) (%FIELDS/%d)" |
| 0x306000000000033 |
"COSQ: Adding COSQ Meter Configuration for VTC. (%METER_GRP/%d) (%VTC/%d) (%CIR/%d) (%CBS/%d)" |
| 0x306000000000034 |
"COSQ: Deleting COSQ Meter Configuration for VTC. (%METER_GRP/%d) (%VTC/%d)" |
| 0x306000000000035 |
"COSQ: Error updating VQF SMS Profile drop level. (%ERROR/%s) (%PORT/%d) (%SLOT/%d)" |
| 0x306000000000036 |
"COSQ: Updating VQF SMS profile. (%PORT/%d) (%SLOT/%d) (%DROPLVL/%x)" |
| 0x306000000000037 |
"COSQ: Error finding DLS entry. (%DID/%d)" |
| 0x306000000000038 |
"COSQ: Configuring VLAN Priority State. (%PORT/%d) (%ENABLE/%s)" |
| 0x306000000000039 |
"COSQ: Creating port VLAN priority mapping to VTC. (%PORT/%d) (%PRIORITY/%d) (%VTC/%d)" |
| 0x306000000000040 |
"COSQ: Unmapping VLAN Priority. (%PORT/%d) (%PRIORITY/%d)" |
| 0x306000000000041 |
"COSQ: Configuring the VTC Mapping for DCSP. (%PORT/%d) (%ENABLE/%s)" |
| 0x306000000000042 |
"COSQ: Creating a PMQ table mapping for a DSCP to VTC Value. (%PORT/%d) (%DSCP/%d) (%VTC/%d)" |
| 0x306000000000043 |
"COSQ: Unmapping DSCP. (%PORT/%d) (%DSCP/%d)" |
| 0x306000000000044 |
"COSQ: Error adding COSQ Meter Configuration. (%METER_GRP/%d) (%VTC/%d) (%CIR/%d) (%CBS/%d)" |
| 0x306000000000045 |
"COSQ: Deleting all entries for DID. (%DID/%d)" |
| 0x306000000000046 |
"COSQ: Deleting entire DLS Configuration." |
| 0x306000000000047 |
"COSQ: Deleting entire COSQ Meter Group Configuration." |
| 0x306000000000048 |
"COSQ: Updating the PMQ STATUS. (%OLD/%s) (%NEW/%s)" |
| 0x306000000000050 |
"Cannot find unit in map of DIDs for link (%LINK/%d)" |
| 0x306000000000051 |
"Error initializing NSE - exiting!" |
| 0x306000000000052 |
"Error updating DLS BCAST Configuration (%FIELDS/%d)" |
| 0x306000000000053 |
"Error updating DLS DLF Configuration (%FIELDS/%d)" |
| 0x306000000000054 |
"DLS BCAST TCPDump Configuration Updated (%LOCAL_EN/%d) (%REMOTE_EN/%d)" |
| 0x306000000000055 |
"DLS DLF TCPDump Configuration Updated (%LOCAL_EN/%d) (%REMOTE_EN/%d)" |
| 0x306000000000056 |
"VLAN TCPDump Configuration Updated (%NSEUNIT/%d) (%DID/%x) (%PORT/%d) (%VLAN/%d) (%LOCAL_EN/%d) (%REMOTE_EN/%d)" |
| 0x306000000000057 |
"Error configuring virtual-wire mode for an interface. (%INTERFACE/%s) (%ERROR/%s)" |
| 0x306000000000058 |
"Error configuring virtual-wire mode for a port. (%DID/%x) (%ERROR/%s)" |
| 0x306000000000059 |
"DID not found in DID to Port Table map (%DID/%x)" |
| 0x306000000000060 |
"DID not found in DID to Port Table (%DID/%x)" |
| 0x306000000000061 |
"Unable to program Inner Tag VLAN, DID already has maximum number (16) of Ingress Q-in-Q Vlans (%CTAGVLAN/%d) (%DID/%x)" |
| 0x306000000000062 |
"Unable to program Outer Tag VLAN, DID already has maximum number (16) of Egress Q-in-Q Vlans (%STAGVLAN/%d) (%DID/%x)" |
| 0x306000000000063 |
"Error adding LAG to Q-in-Q Vlan, LAG not found. (%LAG/%s)" |
| 0x306000000000064 |
"Adding Ctag(s) for LAG Members in Q-in-Q Vlan for Subinterface (%LAG/%s) (%MEMBERS/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000065 |
"Deleting Ctag(s) for LAG Members in Q-in-Q Vlan for Subinterface (%LAG/%s) (%MEMBERS/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000066 |
"Adding Stag data for LAG Members in Q-in-Q Vlan for Subinterface (%LAG/%s) (%MEMBERS/%s) (%MAPPING/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000067 |
"Modifying Stag data for LAG Members in Q-in-Q Vlan for Subinterface (%LAG/%s) (%MEMBERS/%s) (%MAPPING/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000068 |
"Deleting Subinterface data for LAG Members in Q-in-Q Vlan (%LAG/%s) (%MEMBERS/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000069 |
"Creating Subinterface data for LAG Members in Q-in-Q Vlan (%LAG/%s) (%MEMBERS/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000070 |
"Adding Ctag(s) for Port in Q-in-Q Vlan for Subinterface (%DID/%x) (%SUBINTERFACE/%d)" |
| 0x306000000000071 |
"Deleting Ctag(s) for Port in Q-in-Q Vlan for Subinterface (%DID/%x) (%SUBINTERFACE/%d)" |
| 0x306000000000072 |
"Adding Stag data for Port in Q-in-Q Vlan for Subinterface (%DID/%x) (%MAPPING/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000073 |
"Modifying Stag data for Port in Q-in-Q Vlan for Subinterface (%DID/%x) (%MAPPING/%s) (%SUBINTERFACE/%d)" |
| 0x306000000000074 |
"Deleting Subinterface data for Port in Q-in-Q Vlan (%DID/%x) (%SUBINTERFACE/%d)" |
| 0x306000000000075 |
"Creating Subinterface data for Port in Q-in-Q Vlan (%DID/%x) (%SUBINTERFACE/%d)" |
| 0x307000000000001 |
"L2 Learning thread started". |
| 0x307000000000002 |
"L2 Learning service connected to Line DMA-Agent." |
| 0x307000000000003 |
"L2 Learning service disconnected from DMA-Agent." |
| 0x307000000000004 |
"Send to VQF-DMAA Incomplete. (%SENT/%d) (%TARGET/%d)" |
| 0x307000000000005 |
"Send to VQF-DMAA Failed. Dropping failed messages. (%DROPPED/%d)" |
| 0x307000000000006 |
"This message has been deprecated." |
| 0x307000000000007 |
"Cannot create UNIX socket to DMA-agent: (%Socket/%s) (%Error/%d)" |
| 0x307000000000008 |
"L2 Forwarding thread started". |
| 0x307000000000009 |
"L2FS send failure. (%DID/%d) (%Error/%d)" |
| 0x307000000000010 |
"L2FS Receive Failure. (%Error/%d)" |
| 0x307000000000011 |
"L2 Forwarding service connected to Host DMA-Agent." |
| 0x307000000000012 |
"L2FS client poll error. (%Error/%d)" |
| 0x307000000000013 |
"L2 Forwarding service disconnected from Host DMA-Agent." |
| 0x307000000000014 |
"L2 Learning Service received wrong Message Type. (%MSG/%d)" |
| 0x307000000000015 |
"L2 Learning Service received unknown opcode. (%OPCODE/%d)" |
| 0x307000000000016 |
"L2 Learning Service is not running, can't flush interface (%INTERFACE/%s)" |
| 0x307000000000017 |
"Error flushing L2 entries. (%REASON/%s)" |
| 0x307000000000018 |
"Unable to handle PORT_MOTION event, no table entry found (%ENTRY/%s) (%PORT/%d)" |
| 0x307000000000019 |
"Invalid port returned in L2LS descriptor. (%ENTRY/%s) (%PORT/%d)" |
| 0x307000000000020 |
"L2 FDB Tables are full, dropping new learn events." |
| 0x307000000000021 |
"L2 stats pointer is NULL. (%ENTRY/%s)" |
| 0x307000000000024 |
"L2 Learning service connected to Host DMA-Agent." |
| 0x307000000000025 |
"L2 Learning service disconnected from Host DMA-Agent. (%SEP/%d)" |
| 0x307000000000026 |
"Error from host dma-agent. (%TYPE/%s) (%SEP/%d) (%ERROR/%d)" |
| 0x307000000000027 |
"Error from line dma-agent. (%TYPE/%s)" |
| 0x307000000000028 |
"Force deleting L2 H/W entry. (%ENTRY/%s) (%TABLE/%s) (%ADDRESS/%x)" |
| 0x307000000000029 |
"This message has been deprecated." |
| 0x307000000000030 |
"Ignoring Port-Motion of STATIC L2 entry. (%ENTRY/%s) (%FROM/%d) (%TO/%d)" |
| 0x307000000000031 |
"Adding static L2 entry. (%ENTRY/%s)" |
| 0x307000000000032 |
"Deleting static L2 entry. (%ENTRY/%s)" |
| 0x308000000000001 |
"DAG Select Table error (%ERROR/%s)" |
| 0x308000000000002 |
"Failed to program IP Protocol CAM" |
| 0x308000000000003 |
"SDAG Service Definition alloc failed - table full. (%VAL/%d)" |
| 0x308000000000004 |
"SDAG DID Table alloc failed - table full. (%DIDS/%s)" |
| 0x308000000000005 |
"Service Group Configuration error. (%TENANT/%s) (%ERROR/%s)" |
| 0x308000000000006 |
"TCP SYN Cookie configuration error. (%TENANT/%s) (%ERROR/%s)" |
| 0x308000000000007 |
"DOS Group Configuration error. (%TENANT/%s) (%ERROR/%s)" |
| 0x308000000000009 |
"Service Group configured for tenant. (%TenantName/%s) (%ServiceGroup/%d)" |
| 0x308000000000010 |
"Service Group removed from tenant. (%TenantName/%s) (%ServiceGroup/%d)" |
| 0x308000000000011 |
"DOS Group configured for tenant. (%TenantName/%s) (%DosGroup/%d)" |
| 0x308000000000012 |
"DOS Group removed from tenant. (%TenantName/%s) (%DosGroup/%d)" |
| 0x308000000000013 |
"Invalid RQM capability block" |
| 0x308000000000015 |
"Service Group Configuration error. Unit=(%Unit/%d) (%ERROR/%s)" |
| 0x308000000000017 |
"DOS Group Configuration error. Unit=(%Unit/%d) (%ERROR/%s)" |
| 0x308000000000019 |
"Service Group configured for unit. (%Unit/%d) (%ServiceGroup/%d)" |
| 0x308000000000020 |
"Service Group removed from unit. (%Unit/%d) (%ServiceGroup/%d)" |
| 0x308000000000021 |
"DOS Group configured for unit. (%Unit/%d) (%DosGroup/%d)" |
| 0x308000000000022 |
"Cannot find tracking information for Tenant. (%Tenant/%s) (%Slot/%d) (%Instance/%d)" |
| 0x308000000000023 |
"DDOS ZMQ message hdp entity out of range. (%Tenant/%s) (%ZmqMsg/%s) (%HdpEntity/%d)" |
| 0x308000000000024 |
"DM Lookup Config DM offset out of range (%Service/%d) (%DmOffset/%d)" |
| 0x308000000000025 |
"PORT Value Set for IP Tunnel Protocol (%Protocol/%s) (%Port/%d)" |
| 0x308000000000026 |
"IP Tunnel Protocol Enabled (%Protocol/%s)" |
| 0x308000000000027 |
"IP Tunnel Protocol Disabled (%Protocol/%s)" |
| 0x308000000000028 |
"IP Tunnel NVGRE Ethernet Type Set (%Value/%x)" |
| 0x308000000000029 |
"Setting DDOS Vector Version for tenant. (%TenantName/%s) (%DosGroup/%d) (%Unit/%d) (%Version/%x)" |
| 0x308000000000030 |
"Error configuring phase 2 DDOS vector on tenant. (%TenantName/%s) (%Unit/%d) (%Vector/%d)" |
| 0x308000000000031 |
"Ignoring DAG Service Table update for service with 0 seps. (%Unit/%d) (%Service/%d)" |
| 0x309000000000001 |
"Invalid flow-control type. (%type/%d)" |
| 0x309000000000002 |
"Updating interface link state (%ifname/%s) (%state/%s)" |
| 0x309000000000003 |
"ATSE BE2 Training Failure - exiting. (%GCI0/%x) (%GCI1/%x)" |
| 0x309000000000004 |
"Unable to find data for portgroup. (%PORTGROUP/%d)" |
| 0x309000000000005 |
"Unexpected number of portgroup modes. (%PGMODES/%d)" |
| 0x309000000000006 |
"Data inconsistency: Unable to find internal software structure. (%API/%s) (%PORT/%d)" |
| 0x309000000000007 |
"Invalid port passed in ZMQ message (%PORT/%d) (%MSG/%d)" |
| 0x309000000000008 |
"No interfaces available for QOS configuration" |
| 0x309000000000011 |
"Error initializing Port Transceiver library (%RET/%lld)" |
| 0x309000000000012 |
"Port Transceiver library error during programming (%API/%s) (%code/%lld) (%msg/%s)" |
| 0x309000000000013 |
"Eye Pattern Failure on Interface. (%INTERFACE/%s) (%Eye_Value/%d)" |
| 0x309000000000014 |
"ATSE BE2 Training SDK Failure - exiting." |
| 0x309000000000015 |
"Unable to initialize BE2 interface, retrying initialization" |
| 0x309000000000016 |
"BE2 Link Monitor failure detected. (%Unit/%d) (%GCI/%d)" |
| 0x309000000000017 |
"BE2 Link Monitor failure resolved. (%Unit/%d) (%GCI/%d)" |
| 0x30a000000000001 |
"Error initializing XBAR - exiting!" |
| 0x30a000000000002 |
"Initializing platform type (%type/%d)" |
| 0x30a000000000003 |
"Xbar Mcast Schedule (%sched/%d)" |
| 0x30a000000000004 |
"Xbar Path Type (%type/%d) Guaranteed Memory (%mem/%d)" |
| 0x30a000000000005 |
"Xbar Hash (%hash/%s) Port Mirror BitMap (%map/%x)" |
| 0x30a000000000006 |
"Xbar Multicast Dup Map (%port/%d) Dest BitMap (%map/%x)" |
| 0x30a000000000007 |
"Xbar Enabled Module Link (%mid/%d) Dest link idx (%id/%d)" |
| 0x30b000000000001 |
"This message had been deprecated" |
| 0x30b000000000002 |
"Unable to delete Virtual-Wire. Virtual-wire not found (%VWIRE/%s)" |
| 0x30b000000000003 |
"Unable retrieve end-points for Virtual-Wire. Virtual-wire not found (%VWIRE/%s)" |
| 0x30b000000000004 |
"Unable to configure link propagation for Virtual-Wire. Virtual-wire not found (%VWIRE/%s) (%STATE/%s)" |
| 0x30b000000000005 |
"Internal Error, virtual-network not found. (%VNET/%s)" |
| 0x30b000000000006 |
"Internal Error, virtual-network ID not found. (%NDI_ID/%d)" |
| 0x30b000000000007 |
"Internal virtual-network error, Interface not found. (%INTERFACE/%s)" |
| 0x30b000000000008 |
"Internal virtual-network error, VLAN not found. (%VLAN/%d)" |
| 0x30b000000000009 |
"Unable to configure bpdu-mode for virtual-wire. Virtual-wire not found. (%VWIRE/%s)" |
| 0x30b000000000010 |
"This message has been deprecated" |
| 0x30b000000000011 |
"Error adding an interface to a virtual-wire, no vwire found for virtual-network. (%INTERFACE/%s) (%VNET/%s)" |
| 0x30b000000000012 |
"Error deleting an interface from a virtual-wire, no vwire found for virtual-network. (%INTERFACE/%s) (%VNET/%s)" |
| 0x30b000000000013 |
"Virtual-Wire link propagation forcing link state of interface. (%INTERFACE/%s) (%STATE/%s)" |
| 0x30b000000000014 |
"Unable to configure link propagation for Virtual-Wire. Interface not found (%INTERFACE/%s)" |
| 0x30b000000000015 |
"Unable to configure link propagation for Virtual-Wire. Number of destinations does not match (%DEST1/%d) (%DEST2/%d)" |
| 0x30b000000000016 |
"Linkstatus propagation config failure. (%VIRTUAL_WIRE/%s)" |
| 0x30b000000000017 |
"Linkstatus propagation failure. Unable to force interface UP (%INTERFACE/%s)" |
| 0x30b000000000018 |
"Error deleting an interface from a virtual-wire, virtual-network not found. (%INTERFACE/%s) (%VNET/%s)" |
| 0x3201000000000001 |
"Error opening file. (%error/%s) (%file/%s)" |
| 0x3201000000000002 |
"Error reading bytes (%error/%s)" |
| 0x3201000000000003 |
"Error reading (%schema/%s) (%error/%s)" |
| 0x3201000000000004 |
"Failed to build schema validator (%error/%s)" |
| 0x3201000000000005 |
"Error reading manifest (%error/%s)" |
| 0x3201000000000006 |
"Failed to validate manifest (%error/%s)" |
| 0x3201000000000007 |
"Failed to create temp directory. (%error/%s) (%directory_pattern/%s)" |
| 0x3201000000000008 |
"Failed to remove temp directory (%error/%s)" |
| 0x3201000000000009 |
"Failed to open tar file (%error/%s)" |
| 0x3201000000000010 |
"Failed to get item in tar file. (%tar_file/%s) (%error/%s)" |
| 0x3201000000000011 |
"Failed to create file for untar. (%filename/%s) (%error/%s)" |
| 0x3201000000000012 |
"Failed to untar file. (%filename/%s) (%error/%s)" |
| 0x3201000000000013 |
"Failed to chmod. (%filename/%s) (%error/%s)" |
| 0x3201000000000014 |
"File not found (%file/%s) (%manifest/%s)" |
| 0x3201000000000015 |
"Cannot delete file (%file/%s) (%error/%s)" |
| 0x3201000000000016 |
"Failed to start qkviewd daemon. (%error/%s)" |
| 0x3201000000000017 |
"Error: (%error/%s)" |
| 0x3201000000000018 |
"Error collecting peer. (%peer_ip/%s) (%error/%s)" |
| 0x3201000000000019 |
"qkview-collect failed on host: (%start/%s) (%end/%s) (%return_code/%d) (%error/%s) (%cmd_out/%s)" |
| 0x3201000000000020 |
"Error flushing log to tarball. (%logfile/%s) (%error/%s)" |
| 0x3201000000000021 |
"Failed to get valid list of containers. (%error/%s)" |
| 0x3201000000000022 |
"Container finished with error. (%error/%s) (%container_id/%s)" |
| 0x3201000000000023 |
"Malformed container ID, unable to collect. Empty container ID. (%error/%s)" |
| 0x3201000000000024 |
"Failed to copy tarball to container. (%container_id/%s) (%error/%s)" |
| 0x3201000000000025 |
"Unexpected return from container exec command. (%container_or_response/%s) (%container_id/%s) (%error/%s)" |
| 0x3201000000000026 |
"Failed to find any file in tarball: (%error/%s)" |
| 0x3201000000000027 |
"Failed to create tarball header. (%error/%s)" |
| 0x3201000000000028 |
"Failed to create file for request. (%qk_type/%s) (%error/%s)" |
| 0x3201000000000029 |
"Failed to create new request for post. (%qk_type/%s) (%error/%s)" |
| 0x3201000000000030 |
"Failed to receive response from request. (%qk_type/%s) (%error/%s)" |
| 0x3201000000000031 |
"Invalid json unmarshal. (%qk_type/%s) (%error/%s)" |
| 0x3201000000000032 |
"Failed to create new client while collecting snapshots. (%error/%s)" |
| 0x3201000000000033 |
"Unable to receive hostname while collecting snapshots: (%error/%s)" |
| 0x3201000000000034 |
"Unable to complete request due to error REQUEST. (%request/%s) (%error/%s)" |
| 0x3201000000000035 |
"Stat error while trying to add file. (%file/%s) (%error/%s)" |
| 0x3201000000000036 |
"Get header info error while trying to add file. (%file/%s) (%error/%s)" |
| 0x3201000000000037 |
"Open error while trying to add file. (%file/%s) (%error/%s)" |
| 0x3201000000000038 |
"Write header error while trying to add file. (%file/%s) (%error/%s)" |
| 0x3201000000000039 |
"Copy error while trying to add file. (%file/%s) (%error/%s)" |
| 0x3201000000000040 |
"Error creating output directory for collate snapshots. (%error/%s)" |
| 0x3201000000000041 |
"Error creating tar file for collate snapshots. (%tar_file/%s) (%error/%s)" |
| 0x3201000000000042 |
"Unable to delete corefiles. (%core_file/%s) (%error/%s)" |
| 0x3201000000000043 |
"Error while collecting corefiles (%host/%s)" |
| 0x3201000000000044 |
"Qkview collection is already in progress (%qkview/%s)" |
| 0x3201000000000046 |
"Qkviewd is starting. (%version/%s) (%log/%s) (%date/%s)" |
| 0x3201000000000048 |
"No containers were collected. (%message/%s)" |
| 0x3201000000000050 |
"Canceled qkview (%qkview/%s)" |
| 0x3201000000000051 |
"Get Qkview (%qkview/%s)" |
| 0x3201000000000052 |
"Deleted qkview file. (%filename/%s)" |
| 0x3201000000000053 |
"No manifest to verify. (%manifest_file/%s)" |
| 0x3201000000000054 |
"Completed collecting qkview on host: (%start/%s) (%end/%s) (%return_code/%d) (%cmd_out/%s)" |
| 0x3201000000000055 |
"Starting qkview-collect on host: (%cmd/%s)" |
| 0x3201000000000056 |
"Requesting host to collect qkview. (%message/%s)" |
| 0x3201000000000057 |
"Qkviewd listening on: (%qkview_ip/%s)" |
| 0x3201000000000061 |
"Info: (%message/%s)" |
| 0x3201000000000065 |
"Starting collate of containers, saving to file. (%filename/%s)" |
| 0x3201000000000066 |
"Finished collate of containers, saved to file. (%filename/%s)" |
| 0x3201000000000067 |
"Collecting container snapshots. (%filename/%s)" |
| 0x3201000000000068 |
"Collection of container snapshots has finished. (%filename/%s)" |
| 0x3201000000000080 |
"Requesting to collect core-files. (%message/%s)" |
| 0x3201000000000081 |
"Error walking directory (%path/%s) (%error/%s)" |
| 0x3201000000000082 |
"Error opening product info file (%file/%s) (%error/%s)" |
| 0x3201000000000083 |
"Error opening platform info file (%file/%s) (%error/%s)" |
| 0x3201000000000084 |
"Error opening platform_marketing_names file (%file/%s) (%error/%s)" |
| 0x3201000000000085 |
"No disk space available for Qkview operation. (%message/%s)" |
| 0x3201000000000088 |
"Error retreiving container log (%container/%s) (%error/%s)" |
| 0x3201000000000089 |
"No container log data found. (%container/%s)" |
| 0x3201000000000090 |
"TLS Certificates not available to open secure connection. (%message/%s)" |
| 0x3201000000000091 |
"Qkviewd listening for secured connections on: (%qkview_ip/%s)" |
| 0x3201000000000095 |
"Qkviewd service is HEALTHY. (%message/%s)" |
| 0x3201000000000096 |
"Qkviewd service is UNHEALTHY. (%message/%s)" |
| 0x3201000000000097 |
"Qkviewd is going to SHUTDOWN. (%signal/%s)" |
| 0x3201000000000101 |
"Qkview file is being collected. (%filename/%s)" |
| 0x3201000000000102 |
"Unknown error collecting qkview. (%collecting/%d)" |
| 0x3201000000000105 |
"Error adding subpackage, might have a problem with the file system. (%subpackage/%s) (%error/%s)" |
| 0x3201000000000106 |
"Error adding subpackages (%subpackages/%s)" |
| 0x3201000000000107 |
"Failed to untar file for: (%failed_tar_file/%d)" |
| 0x3201000000000108 |
"Found a duplicate file in the QKView tarball. (%error/%s)" |
| 0x3201000000000109 |
"Collection failed for container, so path is set to no-file (%container/%s)" |
| 0x3201000000000110 |
"Error triggering scheduler. (%scheduler_name/%s) (%error/%s)" |
| 0x3201000000000111 |
"Scheduler job created. (%scheduler_name/%s) (%job_id/%d) (%frequency_seconds/%s)" |
| 0x3401000000000001 |
"Failed to load schemas from confd." |
| 0x3401000000000002 |
"Failed to open socket ds." |
| 0x3401000000000003 |
"Confd connect(ds) failed. (%status/%d)" |
| 0x3401000000000004 |
"Failed to open socket ss." |
| 0x3401000000000005 |
"Confd connect(ss) failed. (%status/%d)" |
| 0x3401000000000006 |
"Confd subscribe(ss) failed. (%status/%d)" |
| 0x3401000000000007 |
"Confd subscribe_done(ss) failed. (%status/%d)" |
| 0x3401000000000008 |
"Failed to open socket ods" |
| 0x3401000000000009 |
"Confd connect(ods) failed. (%status/%d)" |
| 0x3401000000000010 |
"Failed to open socket od2." |
| 0x3401000000000011 |
"Confd connect(od2) failed. (%status/%d)" |
| 0x3401000000000012 |
"Confd connect(oss) failed. (%status/%d)" |
| 0x3401000000000013 |
"Confd oper_subscribe(oss). (%path/%s) (%status/%d)" |
| 0x3401000000000014 |
"Confd isubscribe_done(oss). (%status/%d)" |
| 0x3401000000000015 |
"Confd start_session(od) failed. (%status/%d)" |
| 0x3401000000000016 |
"Confd start_session(ods) failed. (%status/%d)" |
| 0x3401000000000017 |
"Confd start_session(ds) failed. (%status/%d)" |
| 0x3401000000000019 |
"Interface object not found. (%key/%s)" |
| 0x3401000000000021 |
"Trunk object not found. (%key/%s)" |
| 0x3401000000000022 |
"Duplicate trunk config member. (%key/%s)" |
| 0x3401000000000023 |
"Try to Add an invalid Config Mbr Ignored! (%key/%s)" |
| 0x3401000000000024 |
"Trunk config member object not found. (%key/%s)" |
| 0x3401000000000025 |
"Trunk config member object not found. (%port/%d)" |
| 0x3401000000000026 |
"Link Actor Out of Sync. (%key/%s) (%reason/%s)" |
| 0x3401000000000027 |
"Link Partner Out of Sync. (%key/%s) (%reason/%s)" |
| 0x3401000000000028 |
"iter_ret: unexpected op. (%path/%s) (%op/%d)" |
| 0x3401000000000029 |
"initMsgHandler failed." |
| 0x3401000000000030 |
"connect failed with no fd!" |
| 0x3401000000000031 |
"Connected to Confd CBD." |
| 0x3401000000000032 |
"Not connected to Confd CBD." |
| 0x3401000000000033 |
"Poll failed." |
| 0x3401000000000034 |
"Too many poll failures, terminating." |
| 0x3401000000000035 |
"Internal link is AVAILABLE. (%key/%s)" |
| 0x3401000000000036 |
"Link added to aggregation. (%key/%s)" |
| 0x3401000000000037 |
"Internal link is UNAVAILABLE. (%key/%s)" |
| 0x3401000000000038 |
"Link removed from aggregation. (%key/%s)" |
| 0x3401000000000039 |
"Interface (%key/%s) (%admin_status/%s) (%link_status/%s) (%duplex/%s) (%lacp_state/%s)" |
| 0x3401000000000040 |
"LACPD starting (%version/%s) (%date/%s)" |
| 0x3401000000000042 |
"Lacpd received trunk config from Confd. (%name/%s)" |
| 0x3401000000000043 |
"Lacpd received interface config from Confd. (%name/%s)" |
| 0x3401000000000044 |
"Lacpd is restarting to failover to the other controller" |
| 0x3401000000000046 |
"(%info_str/%s)" |
| 0x3401000000000047 |
"(%err_str/%s)" |
| 0x3401000000000049 |
"Fatal error, application exit (%fatal_str/%s)" |
| 0x3401000000000050 |
"Error during tmstat operation. (%API/%s) (%TBLNAME/%s) (%error/%s)" |
| 0x3401000000000051 |
"Interface field modified. (%name/%s) (%key/%s) (%value/%s)" |
| 0x3401000000000052 |
"Trunk field modified. (%name/%s) (%key/%s) (%value/%s)" |
| 0x3401000000000053 |
"Worker LACPD instance was unresponsive and timed out. (%slot/%d) (%timeout/%d)" |
| 0x3401000000000054 |
"New worker LACPD instance found. (%slot/%d)" |
| 0x3401000000000055 |
"Adding config member. (%interface/%s) (%trunk/%s)" |
| 0x3401000000000056 |
"Removing config member. (%interface/%s) (%trunk/%s)" |
| 0x3401000000000058 |
"Removing LACP trunk. (%name/%s)" |
| 0x3401000000000059 |
"Modify LACP trunk params. (%name/%s) (%type/%s) (%mode/%s) (%interval/%s)" |
| 0x3401000000000060 |
"Adding working member. (%interface/%s) (%trunk/%s)" |
| 0x3401000000000061 |
"Removing working member. (%interface/%s) (%trunk/%s)" |
| 0x3401000000000062 |
"Adding message to send queue. (%type/%s) (%trunk/%s) (%interface/%s)" |
| 0x3401000000000063 |
"Processing message. (%type/%s) (%trunk/%s) (%interface/%s)" |
| 0x3401000000000064 |
"Callpoint error. (%hook_type/%s) (%when/%s) (%reason/%s)" |
| 0x3401000000000066 |
"Failed to initialize L2 Plugin" |
| 0x3401000000000067 |
"Successfully initialized L2 Plugin" |
| 0x3401000000000068 |
"zmq poll timeout or error (%port/%d) (%errno/%d) (%errno_str/%s)" |
| 0x3401000000000069 |
"Failed to send lacp reset counters request (%slot/%d)" |
| 0x3401000000000070 |
"Failed to initialize zmq client (%slot/%d) (%type/%s) (%reason/%s)" |
| 0x3401000000000071 |
"Failed to read field from db. (%reader/%s) (%path/%s) (%error/%s) (%lasterr/%s)" |
| 0x3401000000000072 |
"Failed to write to db, retrying. (%reason/%s) (%strerr/%s) (%lasterr/%s)" |
| 0x3401000000000073 |
"Field does not exist in db. (%function/%s) (%path/%s)" |
| 0x3401000000000074 |
"Field already exists in db. (%function/%s) (%path/%s)" |
| 0x3401000000000075 |
"Failed to write to db. (%function/%s) (%path/%s) (%strerr/%s) (%lasterr/%s)" |
| 0x3401000000000076 |
"Received fatal signal, exiting. (%signal/%d)" |
| 0x3401000000000077 |
"New System ID configured. (%id/%s)" |
| 0x3401000000000078 |
"Found deployment mode. (%mode/%s)" |
| 0x3401000000000079 |
"Found running slot. (%slot/%d)" |
| 0x3401000000000080 |
"Waiting to enter an active HA state." |
| 0x3401000000000081 |
"Event handling started." |
| 0x3401000000000082 |
"Instance connected to sep device." |
| 0x3401000000000083 |
"New trunk interface. (%name/%s) (%type/%s) (%mode/%s) (%interval/%s)" |
| 0x3401000000000084 |
"Interface link state changed. (%name/%s) (%status/%s) (%speed/%d)" |
| 0x3401000000000085 |
"Interface enabled state changed. (%name/%s) (%enabled/%s)" |
| 0x3401000000000086 |
"Field does not exist in db. (%function/%s) (%path/%s)" |
| 0x3401000000000087 |
"Mux_enable_colldist (%port_state/%s)" |
| 0x3401000000000088 |
"Mux_disable_colldist (%port_state/%s)" |
| 0x3401000000000091 |
"Adding message to send queue. (%type/%s) (%system_priority/%d)" |
| 0x3401000000000092 |
"Processing message. (%type/%s) (%system_priority/%d)" |
| 0x3401000000000093 |
"Confd Operation queue is full. Dropping the top message from queue." |
| 0x3401000000000094 |
"Waiting to connect to sep device." |
| 0x3401000000000096 |
"Failed to get interface name using the port number. (%portNum/%d)" |
| 0x3401000000000097 |
"Failed to send request. (%type/%s) (%reason/%s)" |
| 0x3401000000000098 |
"Failed to send request to the blade. (%slot/%d) (%type/%s) (%reason/%s)" |
| 0x3401000000000099 |
"Failed to send response. (%type/%s) (%err/%d)" |
| 0x3401000000000100 |
"Failed to send response on the blade. (%slot/%d) (%type/%s) (%err/%d)" |
| 0x3401000000000101 |
"Failed to unpack zmq message on the blade. (%type/%s)" |
| 0x3401000000000102 |
"Failed to unpack zmq message. (%type/%s)" |
| 0x3401000000000103 |
"Trunk id changed. (%trunk/%s) (%current/%d) (%new/%d)" |
| 0x3401000000000104 |
"Failed to write to db after retrying many times. (%reason/%s) (%strerr/%s) (%lasterr/%s)" |
| 0x3901000000000001 |
"cdb_get failed (%ret/%d) (%confd_errno/%d) (%fmt/%s)" |
| 0x3901000000000002 |
"Failed to read cert file (%name/%s) (%error/%s)" |
| 0x3901000000000004 |
"Certificate not yet valid (%file/%s)" |
| 0x3901000000000005 |
"chmod failed (%rc/%d)" |
| 0x3901000000000006 |
"Failed to copy (%file/%s)" |
| 0x3901000000000008 |
"Creating CSR (%name/%s)" |
| 0x3901000000000009 |
"Failed to read input crl file. (%filename/%s)" |
| 0x3901000000000010 |
"Failed to write crl file: (%path/%s)" |
| 0x3901000000000012 |
"File cannot be opened (%file/%s)" |
| 0x3901000000000013 |
"OpenSSL public key failed." |
| 0x3901000000000014 |
"Key/Certificate mismatch (%file1/%s) (%file2/%s)" |
| 0x3901000000000015 |
"Failed to open key file (%name/%s)" |
| 0x3901000000000016 |
"Failed to read key file (%name/%s)" |
| 0x3901000000000017 |
"Specified maapi element does not exists in cdb (%path/%s)(%key/%s)" |
| 0x3901000000000018 |
"Failed to set element in cdb (%path/%s)(%key/%s)(%error/%s)(%error_no/%s)" |
| 0x3901000000000019 |
"OpenSSL ASN1_INTEGER_new failed to allocate memory." |
| 0x3901000000000020 |
"OpenSSL ASN1_STRING_set_default_mask_asc failed." |
| 0x3901000000000021 |
"OpenSSL BIO_new_fp failed allocate memory." |
| 0x3901000000000022 |
"OpenSSL BIO_new failed allocate memory." |
| 0x3901000000000024 |
"OpenSSL BIO_write failed to write CSR." |
| 0x3901000000000025 |
"OpenSSL BN_GENCB_set failed to generate callback." |
| 0x3901000000000026 |
"OpenSSL BN_new failed allocate memory." |
| 0x3901000000000028 |
"OpenSSL BN_pseudo_rand failed." |
| 0x3901000000000029 |
"OpenSSL BN_set_word failed." |
| 0x3901000000000030 |
"OpenSSL BN_to_ASN1_INTEGER failed." |
| 0x3901000000000031 |
"OpenSSL certificate key is nil." |
| 0x3901000000000032 |
"OpenSSL CONF_modules_load failed." |
| 0x3901000000000033 |
"Certificate Request city (%city/%s)." |
| 0x3901000000000034 |
"Certificate Request country (%country/%s)." |
| 0x3901000000000035 |
"Certificate Request email (%email/%s)." |
| 0x3901000000000036 |
"Certificate Request name (%name/%s)." |
| 0x3901000000000037 |
"Certificate Request organization (%organization/%s)." |
| 0x3901000000000038 |
"Certificate Request organizational unit (%unit/%s)." |
| 0x3901000000000039 |
"Certificate Request region (%state/%s)." |
| 0x3901000000000040 |
"Certificate Request version (%version/%d)." |
| 0x3901000000000042 |
"OpenSSL do_sign_init failed." |
| 0x3901000000000043 |
"OpenSSL EC_GROUP_new_by_curve_name failed." |
| 0x3901000000000044 |
"OpenSSL EC_KEY_generate_key failed." |
| 0x3901000000000045 |
"OpenSSL EC_KEY_new failed to allocate memory." |
| 0x3901000000000046 |
"OpenSSL EC_KEY_set_group failed." |
| 0x3901000000000048 |
"OpenSSL_malloc failed to allocate bytes (%size/%u)" |
| 0x3901000000000049 |
"OpenSSL X509_name parse error." |
| 0x3901000000000050 |
"OpenSSL NCONF_get_section failed." |
| 0x3901000000000051 |
"OpenSSL NCONF_get_string failed to find file (%file/%s)" |
| 0x3901000000000052 |
"OpenSSL NCONF_load failed for file (%file/%s)" |
| 0x3901000000000053 |
"OpenSSL NCONF_new failed to allocate memory." |
| 0x3901000000000054 |
"OpenSSL OBJ_create failed for (%name/%s)." |
| 0x3901000000000055 |
"OpenSSL OBJ_sn2nid failed." |
| 0x3901000000000056 |
"OpenSSL PEM_bytes_read_bio failed (%name/%s)" |
| 0x3901000000000057 |
"OpenSSL PEM_read_bio_X509_REQ failed read csr." |
| 0x3901000000000058 |
"Failed to read crl. Invalid PEM format crl input" |
| 0x3901000000000059 |
"OpenSSL PEM_read_bio_PrivateKey failed read key (%file/%s)" |
| 0x3901000000000060 |
"OpenSSL PEM_write_bio_ECPrivateKey failed to write key." |
| 0x3901000000000061 |
"OpenSSL PEM_write_bio_RSAPrivateKey failed to write key." |
| 0x3901000000000062 |
"OpenSSL PEM_write_bio_X509_REQ failed write certificate request." |
| 0x3901000000000063 |
"OpenSSL dev random error." |
| 0x3901000000000064 |
"OpenSSL RSA_generate_key_ex failed." |
| 0x3901000000000065 |
"OpenSSL RSA_new_method failed." |
| 0x3901000000000066 |
"OpenSSL Subject not starting with backslash." |
| 0x3901000000000067 |
"OpenSSL X509_get_pubkey failed to get public key." |
| 0x3901000000000068 |
"OpenSSL X509_gmtime_adj failed." |
| 0x3901000000000069 |
"OpenSSL X509_NAME_add_entry_by_NID failed for (%name/%s)." |
| 0x3901000000000070 |
"OpenSSL X509_Name_new failed to allocate memory." |
| 0x3901000000000071 |
"OpenSSL X509_new failed to allocate memory." |
| 0x3901000000000072 |
"OpenSSL X509_REQ_get_pubkey failed to get public key." |
| 0x3901000000000073 |
"OpenSSL X509 create CSR failed." |
| 0x3901000000000074 |
"OpenSSL X509_REQ_new failed to allocate memory." |
| 0x3901000000000075 |
"OpenSSL X509_REQ_set_pubkey failed." |
| 0x3901000000000076 |
"OpenSSL X509_REQ_set_subject_name failed." |
| 0x3901000000000077 |
"OpenSSL X509_REQ_set_version failed." |
| 0x3901000000000078 |
"OpenSSL X509_REQ_verify failed to verify signature." |
| 0x3901000000000079 |
"OpenSSL X509_set_issuer_name failed." |
| 0x3901000000000080 |
"OpenSSL X509_set_pubkey failed to set public key." |
| 0x3901000000000081 |
"OpenSSL X509_set_serialNumber failed." |
| 0x3901000000000082 |
"OpenSSL X509_sign failed." |
| 0x3901000000000083 |
"OpenSSL X509_STORE_new failed allocate memory." |
| 0x3901000000000084 |
"OpenSSL X509_time_adj_ex failed." |
| 0x3901000000000085 |
"OpenSSL X509V3_EXT_add_nconf failed to load extension (%name/%s)." |
| 0x3901000000000086 |
"OpenSSL X509V3_EXT_REQ_add_nconf failed to load extension (%name/%s)." |
| 0x3901000000000087 |
"create_server failed (%pam_radius_conf/%s) (%rad_server/%s) (%timeout/%d)" |
| 0x3901000000000088 |
"OpenSSL X509_STORE_set_default_paths failed." |
| 0x3901000000000090 |
"Received Info (%details/%s)" |
| 0x3901000000000091 |
"create_pam_tacplus_item failed (%server/%s)." |
| 0x3901000000000097 |
"The Active Directory server does not support unix attributes such as uidNumber; attempting to create alternate ObjectSID to uidNumber mappings." |
| 0x3901000000000098 |
"Unable to retrieve domain SID for supplied AD servers and domains; server will be treated as if it has unix attributes present." |
| 0x3901000000000099 |
"Domain SID: (%domainSid/%s)" |
| 0x3901000000000100 |
"(%item/%s): (%data/%s)" |
| 0x3901000000000101 |
"LDAP API error during (%operation/%s) (%code/%d) (%error/%s)" |
| 0x3901000000000104 |
"Active Directory enabled" |
| 0x3901000000000105 |
"Saved Certificate Authority (CA) Bundle file: (%name/%s)" |
| 0x3901000000000106 |
"Unable to save Certificate Authority (CA) Bundle file (%name/%s) (%error_no/%d)" |
| 0x3901000000000107 |
"LDAP bind password supplied but empty; acting as if no bind password" |
| 0x3901000000000108 |
"Missing server secret. (%path/%s)" |
| 0x3901000000000109 |
"Failed to set element in cdb (%path/%s) (%error/%s) (%error_no/%s)" |
| 0x3901000000000110 |
"Saved HTTPD configuration file. (%name/%s)" |
| 0x3901000000000111 |
"Unable to save HTTPD configuration file. (%name/%s)" |
| 0x3901000000000112 |
"Authentication Manager started (%version/%s) (%log/%s) (%build_date/%s)" |
| 0x3901000000000113 |
"SERVICE_INDICATOR initializing authentication-mgr in FIPS 140-3 mode" |
| 0x3901000000000114 |
"AUDIT - SERVICE_INDICATOR (%user/%s) (%msg/%s) (%algo/%s)" |
| 0x3901000000000116 |
"OpenSSL Keys and Certificates must start with -----BEGIN ..." |
| 0x3901000000000120 |
"CA-BUNDLE input data is formatted with the wrong number of dashes." |
| 0x3901000000000121 |
"maapi create transaction failed." |
| 0x3901000000000122 |
"Unsuported key type entered." |
| 0x3901000000000123 |
"Basic authentication update succeeded." |
| 0x3901000000000124 |
"Unable to create a certificate signing request(CSR)." |
| 0x3901000000000125 |
"Certificate size is bigger than (%m_cert_size/%u) and cannot be used." |
| 0x3901000000000126 |
"Commit approved for blank key and certificate." |
| 0x3901000000000127 |
"A zero key size but non-zero certificate is unacceptable." |
| 0x3901000000000128 |
"Key size is too big." |
| 0x3901000000000129 |
"Commit approved for missing certificate." |
| 0x3901000000000130 |
"Certificate revocation list size (%m_crl_size/%d) is too big and cannot be used." |
| 0x3901000000000131 |
"Tokenlifetime successfully updated in ConfD database." |
| 0x3901000000000132 |
"Path (%m_tokenlifetime_cfg_path/%s) does not exist." |
| 0x3901000000000133 |
"Failed setting Operational state data for tokenlifetime" |
| 0x3901000000000134 |
"Key size too big to be supported." |
| 0x3901000000000135 |
"Failed to create a directory (%path/%s) (%error/%s)" |
| 0x3901000000000136 |
"Deleted HTTPD configuration file. (%name/%s)" |
| 0x3901000000000137 |
"Opening SElinux port for tacacs server. (%port/%d) (%server/%s)" |
| 0x3901000000000138 |
"Closing SElinux port for tacacs server (%port/%d) (%server/%s)" |
| 0x3901000000000139 |
"Failed to update state data for specified path (%path/%s) (%confd_errno/%d)" |
| 0x3901000000000143 |
"Unable to open pam config file (%PATH/%s)" |
| 0x3901000000000146 |
"The OCSP IP address is not configured. Setting OCSP override-responder to off." |
| 0x3901000000000147 |
"CDB get operation failed. (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x3901000000000148 |
"System's IPv4 management address isn't configured." |
| 0x3901000000000150 |
"Received Info (%details/%s)" |
| 0x3901000000000151 |
"Invalid operation (%op_code/%d)" |
| 0x3901000000000152 |
"Token is invalidated (%session_id/%s)" |
| 0x3901000000000153 |
"Failed to read CDB element (%component/%s) (%error/%s) (%error_no/%s)" |
| 0x3901000000000154 |
"Failed to delete CDB element (%component/%s) (%error/%s) (%error_no/%s)" |
| 0x3901000000000155 |
"Unable to open flag file (%FILE/%s) (%OPERATION/%s)" |
| 0x3901000000000156 |
"Token idle time CDB error (%component/%s) (%message/%s)" |
| 0x3901000000000158 |
"Unable to retrieve domain SID for supplied AD servers and domains; using saved value from last discovery. (%domainSid/%s)" |
| 0x3901000000000159 |
"SSL is on, but LDAP server does not use type LDAPS. (%server/%s)" |
| 0x3901000000000160 |
"No LDAP server is configured correctly. LDAP authentication will fail." |
| 0x3901000000000164 |
"Ignoring case in LDAP user/group name lookups: (%ignore/%s)" |
| 0x3901000000000165 |
"LDAP AD using unix attributes for UID/GID lookups: (%ua_enabled/%s)" |
| 0x3901000000000166 |
"Password hash algorithm completion (%count/%d) (%first/%s)" |
| 0x3901000000000167 |
"Password hash rounds completion (%count/%d) (%first/%s)" |
| 0x3901000000000168 |
"Password hash config open failed (%path/%s)" |
| 0x3901000000000169 |
"Password hash algorithm info missing (%alg/%s)" |
| 0x3901000000000170 |
"Failed to start a CDB session (%ret/%d) (%confd_errno/%d) (%err_str/%s)" |
| 0x3901000000000171 |
"(%msg/%s)" |
| 0x3901000000000172 |
"Password policy has been updated in compliance with Common Criteria." |
| 0x3901000000000173 |
"Failed to initialize inotify (%error/%s)" |
| 0x3901000000000174 |
"Failed to add inotify watch for (%file/%s) (%error/%s)" |
| 0x3901000000000175 |
"Failed to start CDB session (%component/%s) (%error/%s) (%error_no/%d)" |
| 0x3901000000000176 |
"Failed to get number of instances (%path/%s) (%error_no/%d)" |
| 0x3901000000000177 |
"Failed to retrieve password hash configuration (%error/%s)" |
| 0x3901000000000178 |
"Failed to retrieve basic auth configuration (%error_no/%d)" |
| 0x3901000000000179 |
"Certificate validation failed (%reason/%s)" |
| 0x3901000000000180 |
"CA Bundle validation failed (%name/%s) (%reason/%s)" |
| 0x3901000000000181 |
"CA Bundle size exceeded maximum supported size (%name/%s) (%max_size/%s)" |
| 0x3901000000000182 |
"Certificate minimum path validation failed (%reason/%s)" |
| 0x3901000000000183 |
"Certificate missing Server Authentication EKU (OID 1.3.6.1.5.5.7.3.1)" |
| 0x3901000000000184 |
"Certificate has invalid signature algorithm (%required/%s)" |
| 0x3901000000000185 |
"Intermediate certificate has invalid signature algorithm (%reason/%s)" |
| 0x3901000000000186 |
"RestConf token validation failed (%error/%s)" |
| 0x3901000000000187 |
"Failed to invalidate session (%username/%s) (%session_id/%s) (%error/%s)" |
| 0x3901000000000188 |
"Token missing user information in payload" |
| 0x3901000000000189 |
"Failed to delete token session from CDB (%path/%s) (%error_no/%d)" |
| 0x3901000000000190 |
"Failed to update token configuration (%error/%s)" |
| 0x3901000000000191 |
"Failed to update idle timeout configuration (%username/%s) (%error/%s)" |
| 0x3901000000000192 |
"Failed to update idle timeout operational data (%error_no/%d)" |
| 0x3901000000000193 |
"Failed to write configuration file (%path/%s) (%error/%s)" |
| 0x3901000000000194 |
"Failed to set file permissions (%path/%s) (%mode/%s) (%error_no/%d)" |
| 0x3901000000000195 |
"Failed to write nslcd configuration (%error/%s)" |
| 0x3901000000000196 |
"Failed to write RADIUS configuration (%server/%s) (%error/%s)" |
| 0x3901000000000197 |
"Invalid LDAP server configuration (%server/%s) (%reason/%s)" |
| 0x3901000000000198 |
"No valid LDAP servers configured authentication will fail" |
| 0x3901000000000199 |
"Resource allocation failed (%component/%s) (%resource/%s)" |
| 0x3901000000000200 |
"Failed to decrypt ConfD secret (%type/%s) (%error/%s)" |
| 0x3901000000000201 |
"Failed to open operational session for basic authentication (%error_no/%d)" |
| 0x3901000000000202 |
"Failed to set operational state for basic authentication (%error_no/%d)" |
| 0x3901000000000203 |
"LDAP CA certificate not configured; server certificate validation disabled" |
| 0x3901000000000204 |
"Failed to complete Mappi transaction. (%ERRNO/%d) (%LASTERR/%s)" |
| 0x3901000000000205 |
"Failed to re-encrypt key with new passphrase - passphrase mismatch or invalid key" |
| 0x3901000000000206 |
"Authentication server - (%server/%s) secret validation failed (%reason/%s); please verify and reconfigure the secret" |
| 0x3901000000000207 |
"Failed to install crypto keys. (%error/%s) (%error_no/%d)" |
| 0x4301000000000001 |
"Platform Stats Bridge Starting. (%version/%s) (%date/%s)" |
| 0x4301000000000002 |
"Platform Stats Bridge Exiting." |
| 0x4301000000000003 |
"(%func/%s): stats timeout for (%component/%s)" |
| 0x4302000000000001 |
"(%func/%s): Failed to get a cdb entry. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x4302000000000002 |
"(%func/%s):get_next timeout for (%component_name/%s)" |
| 0x4305000000000001 |
"Error reply received while fetching stats. (%ERRCODE/%x) (%ERRORSTR/%s)" |
| 0x4305000000000006 |
"(%msg/%s) (%tenant/%s)" |
| 0x4701000000000001 |
"Line DMA Agent Starting" |
| 0x4701000000000002 |
"TCPD shared memory mapping failed" |
| 0x4701000000000003 |
"DM context memory mappin failed" |
| 0x4701000000000004 |
"TCPD socket initialization failed" |
| 0x4701000000000005 |
"L2 socket initialization failed" |
| 0x4701000000000006 |
"PCIe device attach failed" |
| 0x4701000000000007 |
"IOMMU setup failed" |
| 0x4701000000000008 |
"Packet capture startup configuration failed" |
| 0x4701000000000009 |
"Packet capture started" |
| 0x4701000000000010 |
"Packet capture stopped" |
| 0x4701000000000011 |
"Packet capture client connected" |
| 0x4701000000000012 |
"Packet capture client disconnected" |
| 0x4701000000000013 |
"Packet capture client conenction rejected as client already connected" |
| 0x4701000000000014 |
"L2 client connected" |
| 0x4701000000000015 |
"L2 client disconnected" |
| 0x4701000000000016 |
"L2 client conenction rejected as client already connected" |
| 0x4701000000000017 |
"L2 learn message from Daemon contains wrong fpga_type value for this platform" |
| 0x4701000000000018 |
"DM FAILED TO INITIALIZE, LINE-DMA-AGENT RESTARTING" |
| 0x4701000000000042 |
"Failed to create TMStats segment." |
| 0x4701000000000044 |
"Failed to create TMSTAT vqfdm_general row. (%FPGA/%s)" |
| 0x4701000000000046 |
"Failed to publish TMStats segment." |
| 0x4801000000000001 |
"optics-mgr starting (%version/%s) (%date/%s) (%partition/%s)" |
| 0x4801000000000002 |
"optics-mgr exiting" |
| 0x4801000000000003 |
"optics-mgr error (%error/%s)" |
| 0x4801000000000004 |
"optics-mgr HAL response error. (%errorcode/%d) (%errmsg/%s)" |
| 0x4801000000000005 |
"optics-mgr invalid hardware platform (%hardwaretype/%d)" |
| 0x4801000000000006 |
"No optical tuning available (%partnum/%s) (%interface/%s) (%revision/%s)" |
| 0x4801000000000007 |
"No optical tuning available for optical version (%major/%d) (%minor/%d)" |
| 0x4801000000000008 |
"Optical tuning invalid port (%partnum/%s) (%port/%s) (%revision/%s)" |
| 0x4801000000000010 |
"Received request to validate optic. (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)" |
| 0x4801000000000011 |
"OPTICS_SUCCESS_TUNING_NEEDED returning tuning (%numctle/%u) (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)" |
| 0x4801000000000012 |
"OPTICS_SUCCESS_NO_TUNING (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)" |
| 0x4801000000000013 |
"Failed to find tuning for optic (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)" |
| 0x4801000000000014 |
"Received request to validate optic. (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s) (%hwtype/%s)" |
| 0x4801000000000015 |
"Received request to validate optic. (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s) (%hwtype/%s) (%speed/%s) (%lifeycle/%s)" |
| 0x4801000000000016 |
"OPTICS_TUNING_EARLY_SUPPORT returning tuning (%numctle/%u) (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)" |
| 0x4801000000000017 |
"OPTICS_SUCCESS_NO_TUNING_EARLY_SUPPORT (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)" |
| 0x4802000000000001 |
"optics-mgr unable to initialize ZMQ. (%error/%d)" |
| 0x4802000000000002 |
"ZMQ Message Server Started. Listening on (%port/%d)" |
| 0x4802000000000003 |
"Failed to register endpoint (%endpoint/%s)" |
| 0x4802000000000004 |
"Failed to deregister endpoint (%endpoint/%s)" |
| 0x4802000000000005 |
"Failed to send reply (%endpoint/%s) (%replytype/%s)" |
| 0x4802000000000006 |
"Failed to get zmq handle to socket" |
| 0x4802000000000007 |
"Failed to add source data to ZMQ envelope (%endpoint/%s)" |
| 0x4802000000000008 |
"Failed to init ZMQ envelope (%endpoint/%s)" |
| 0x4802000000000009 |
"Failed to init ZMQ payload (%endpoint/%s)" |
| 0x4802000000000010 |
"Expect non null ZMQ payload (%endpoint/%s)" |
| 0x4802000000000011 |
"Unexpected payload count, should be 1. No response generated (%cnt/%d)" |
| 0x4802000000000012 |
"Optics-Mgr does not recognize the request message received" |
| 0x4802000000000013 |
"Failed to parse request message (%request/%s)" |
| 0x4802000000000014 |
"Failed to add message to payload (%replysize/%u) (%lensize/%u)", |
| 0x501000000000001 |
"OrchAgent starting (%version/%s) (%date/%s)" |
| 0x501000000000002 |
"OrchAgent exiting" |
| 0x501000000000004 |
"SERVICE_INDICATOR initializing orchestration-agent in FIPS 140-3 mode" |
| 0x501000000000005 |
"Chassis serial number is invalid - tenants will not operate" |
| 0x501000000000006 |
"Invalid Platform Type (%msg/%s)" |
| 0x501000000000007 |
"Internal error (%error_details/%s)" |
| 0x501000000000009 |
"Tenant does not support secure channel, falling back to insecure channel to prevent connection failure (%tenant/%s)" |
| 0x501000000000010 |
"Token is NULL when reading file (%file/%s)" |
| 0x502000000000001 |
"maapi failed to connect to config daemon (%error_details/%s) (%error/%s)" |
| 0x502000000000002 |
"failed to end session with config daemon (%error_details/%s) (%error/%s)" |
| 0x503000000000001 |
"maapi_set failed (%tenant_config/%s) (%attribute/%s) (%path/%s) (%error_details/%s) (%error_no/%d)" |
| 0x503000000000002 |
"maapi_create failed (%tenant_config/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000006 |
"cdb_get failed for slot_config name (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000007 |
"cdb_get failed for slot_config value (%slot_config_value/%d) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000008 |
"cdb_get failed in getting the base-mac for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000009 |
"cdb_get failed in getting the mgmt-mac for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x50300000000000A |
"Tenant ID assigned (%tenant/%s)" |
| 0x50300000000000B |
"No dossier found" |
| 0x50300000000000C |
"No license installed" |
| 0x503000000000010 |
"cdb_get failed in getting the mac pool size for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000011 |
"failed to read partition slot data (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000012 |
"maapi_set_elem interface failed (%interface/%s)" |
| 0x503000000000013 |
"maapi_create hugepages failed for tenant (%slot_no/%d) (%path/%s) (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000014 |
"maapi_delete hugepages failed for tenant (%slot_no/%d) (%path/%s) (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000015 |
"tenant console user operation failed (%user/%s) (%op/%s) (%error_details/%s) (%error_no/%d)" |
| 0x503000000000016 |
"tenant console user added (%user/%s)" |
| 0x503000000000017 |
"tenant console user deleted (%user/%s)" |
| 0x503000000000018 |
"Failed to update node running state for node (%path/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000019 |
"Failed to update node name for node (%path/%s)" |
| 0x503000000000020 |
"Failed to update node state for node (%path/%s)" |
| 0x503000000000021 |
"Failed to read node name for index (%node_no/%d)" |
| 0x503000000000022 |
"Failed to read node config state for node (%path/%s)" |
| 0x503000000000023 |
"cdb_get failed in getting the appliance-mode for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000024 |
"New tenant has been added in tenant DB. state = CONFIGURED (%tenant/%s) (%blade/%d)" |
| 0x503000000000025 |
"cdb_get failed for (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000026 |
"cdb_get failed in getting the storage size for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000027 |
"unknown tenant instance type (%name/%s) (%type_no/%u)" |
| 0x503000000000028 |
"cdb_get failed (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000029 |
"Sub-module configuration created (%tenant/%s)" |
| 0x503000000000030 |
"Sub-module configuration deleted (%tenant/%s)" |
| 0x503000000000031 |
"Unable to fetch feature flag in function (%func/%s)" |
| 0x503000000000032 |
"Existing tenants count (%tenant_count/%d)" |
| 0x503000000000033 |
"Invalid tenant instantiation" |
| 0x503000000000034 |
"Tenant name is already being used by existing system service (%tenant/%s) (%service/%s)" |
| 0x503000000000035 |
"Platform self signed cert and key size is zero" |
| 0x503000000000036 |
"Failed to create maapi transaction (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000037 |
"Failed to create maapi read transaction (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000038 |
"Key header check failed (%header/%s)" |
| 0x503000000000039 |
"Key Hash (%type/%s) (%hash/%s)" |
| 0x503000000000040 |
"maapi install crypto keys error (%error_details/%s) (%error_no/%d)" |
| 0x503000000000041 |
"(%error/%s) (%error_details/%s) (%error_no/%d)" |
| 0x503000000000042 |
"Allocated virtual tenant slot (%node/%s)(%slot_no/%d)" |
| 0x503000000000043 |
"Released virtual tenant slot (%node/%s)(%slot_no/%d)" |
| 0x503000000000044 |
"Tenant name too long for virtual console access (%tenant/%s) (%maxlen/%d)" |
| 0x503000000000045 |
"Username already exists, cannot add virtual console user for tenant (%tenant/%s)" |
| 0x503000000000046 |
"maapi_delete failed for modules (%path/%s) (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000047 |
"maapi_get failed for modules (%path/%s) (%vfgroup/%d) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000048 |
"maapi_set failed for modules (%path/%s) (%vfgroup/%d) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000049 |
"maapi_delete failed for modules (%path/%s) (%vfgroup/%d) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000050 |
"maapi_exists failed (%path/%s) (%error_details/%s)" |
| 0x503000000000051 |
"maapi_create failed for vf group (%path/%s) (%vfgroup/%d) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000052 |
"Failed to get tenant configuration (%tenant_config/%s) (%attribute/%s) (%path/%s) (%error_details/%s) (%error_no/%d)" |
| 0x503000000000053 |
"maapi_set failed for tenant storage (%error_no/%d) (%error_details/%s)" |
| 0x503000000000054 |
"maapi_set failed for tenant reserved-cpus (%error_no/%d) (%error_details/%s)" |
| 0x503000000000055 |
"Failed to read HSM state while deploying tenant (%error_no/%d) (%error_details/%s)" |
| 0x503000000000056 |
"Failed to write mgmt vlan (%mgmt_vlan/%s) (%field/%s) (%operation/%s)" |
| 0x503000000000057 |
"Failed to create ConfD transaction (%text/%s) (%error_details/%s) (%error/%s)" |
| 0x503000000000058 |
"Failed to complete transaction (%text/%s) (%error_details/%s) (%error/%s)" |
| 0x503000000000059 |
"maapi_exists check not true (%path/%s) (%error_details/%s) (%error/%s) (%error_no/%d) (%ret/%d)" |
| 0x503000000000060 |
"Failed to update referenced-by-tenants for cloud-init (%name/%s) (%tenant/%s) (%error_details/%s)" |
| 0x503000000000061 |
"Failed to delete referenced-by-tenants for cloud-init (%name/%s) (%tenant/%s) (%error_details/%s)" |
| 0x503000000000062 |
"Failed to decrypt cloud-init user-data (%error_details/%s) (%error_no/%d)" |
| 0x503000000000063 |
"YAML lint failed for cloud-init (%name/%s) (%error/%s)" |
| 0x503000000000064 |
"maapi_get failed for (%tenant_config/%s) (%tenant/%s) (%path/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000065 |
"maapi_set failed for (%tenant_config/%s) (%tenant/%s) (%path/%s) (%error/%s) (%error_no/%d)" |
| 0x503000000000066 |
"Releasing stale tenant reserved ids (%tenant_ids/%s)" |
| 0x504000000000001 |
"cdb_get failed for TENANTCONFIG name (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000002 |
"cdb_cd failed for (%path/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000003 |
"cdb_get failed for (%tenant_config/%s) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000004 |
"cdb_get failed for (%tenant_config_value/%d) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000005 |
"cdb_set failed for (%tenant_config/%s) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000006 |
"cdb_delete failed for (%tenant_config/%s) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000007 |
"cdb_get failed to get mac for mac entry (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000008 |
"cdb_get failed for vlans (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000009 |
"cdb_get failed in getting the vlan for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000010 |
"Platform is not ready on node (%platform/%d) (%node_no/%d)" |
| 0x504000000000011 |
"Failed to end session with config daemon on cluster oper data (%error_details/%s) (%error/%s)" |
| 0x504000000000012 |
"cdb_delete failed for (%tenant_instance/%s) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000013 |
"cdb_get failed for (%tenant_instance_config/%s) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000014 |
"cdb_get failed for TENANT name (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000015 |
"cdb_get failed for pod name for tenant (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000016 |
"cdb_get failed for pod node (%tenant/%s) (%pod/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000017 |
"cdb_get failed for pod ip (%tenant/%s) (%pod/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000018 |
"pod ip type unsupported (%tenant/%s) (%pod/%s) (%type_no/%u)" |
| 0x504000000000019 |
"cdb_get failed for TENANT type (%tenant/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000020 |
"cdb_cd failed for (%path/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000021 |
"submod cdb_get failed for (%tenant_config/%s) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000022 |
"submod cdb_get failed for (%tenant_config_value/%d) (%attribute/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000023 |
"Old config value does not exist for (%tenant_config/%s)" |
| 0x504000000000024 |
"cdb_get failed for virtual-wires (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000025 |
"cdb_get failed for slot serial number (%slot/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000026 |
"cdb_get failed for slot platform ID (%slot/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000027 |
"cdb_exist failed to check slot serial number (%slot/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000028 |
"cdb_exist failed to check slot platform ID (%slot/%s) (%error_details/%s) (%error/%s) (%error_no/%d)" |
| 0x504000000000029 |
"Failed to start CDB session for (%object/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000030 |
"Failed to get number of instances for (%object/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000031 |
"Failed to get key name (%object/%s) (%index/%d) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000032 |
"Failed to get user-data from CDB (%object/%s) (%key/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000033 |
"Failed during diff iterate for (%object/%s) (%index/%d) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000034 |
"Failed to create MAAPI transaction for (%object/%s) (%key/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000035 |
"Failed to install MAAPI crypto keys (%object/%s) (%key/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000036 |
"Failed to decrypt data using ConfD for (%object/%s) (%key/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000037 |
"Failed to set state user-data (%object/%s) (%key/%s) (%retry/%d) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000038 |
"Failed to set CDB state user-data (%object/%s) (%key/%s) (%error_details/%s) (%error_no/%d)" |
| 0x504000000000039 |
"Exception occurred while setting user-data (%object/%s) (%key/%s) (%retry/%d)" |
| 0x504000000000040 |
"Failed to set final CDB state after retries (%object/%s) (%key/%s) (%retry/%d) (%error_details/%s) (%error_no/%d)" |
| 0x505000000000001 |
"tenant creation failed for (%tenant/%s) (%node_no/%d) (%ret/%d)" |
| 0x505000000000002 |
"tenant deletion failed for (%tenant/%s) (%node_no/%d) (%ret/%d)" |
| 0x505000000000003 |
"Config Map creation failed for (%tenant/%s) (%node_no/%d)" |
| 0x505000000000004 |
"Config Map deletion failed for (%tenant/%s) (%node_no/%d)" |
| 0x505000000000006 |
"Timed out waiting for tenant helper job to complete (%path/%s) (%timeout/%d)" |
| 0x505000000000008 |
"Secret creation failed for (%tenant/%s) (%node_no/%d)" |
| 0x505000000000009 |
"Secret deletion failed for (%tenant/%s) (%node_no/%d)" |
| 0x505000000000010 |
"Kvm helper job creation failed for (%tenant/%s)" |
| 0x505000000000011 |
"Kvm helper job deletion failed for (%tenant/%s)" |
| 0x505000000000012 |
"Kvm Helper job failed to de-allocate the resources for (%tenant/%s)" |
| 0x505000000000013 |
"Custom Network Interface creation failed (%tenant/%s) (%error_no/%d)" |
| 0x505000000000015 |
"Tenant External Interface deletion failed for (%tenant/%s)" |
| 0x505000000000016 |
"Tenant External Interface creation failed for (%tenant/%s)" |
| 0x505000000000017 |
"Tenant not launched. Platform services not reported READY on node (%tenant/%s) (%node_no/%d)" |
| 0x505000000000018 |
"Tenant not launched. Node is disabled (%tenant/%s) (%node_no/%d)" |
| 0x50500000000001A |
"Detected not configured tenant - Queued deletion (%tenant/%s)" |
| 0x50500000000001B |
"Custom Network Interface creation failed (%tenant/%s) (%error_details/%s)" |
| 0x505000000000020 |
"Failed: PatchSvcPOD: (%type/%s) (%msg/%s)" |
| 0x505000000000022 |
"SvcPOD: (%type/%s) (%msg/%s)" |
| 0x505000000000024 |
"V6 prefix to mask operation failed (%tenant/%s)" |
| 0x505000000000025 |
"Tenant Size is not valid." |
| 0x505000000000026 |
"Tenant Disk Resize failed (%tenant/%s) (%error_details/%s)" |
| 0x505000000000027 |
"Tenant Cannot be resize to smaller size" |
| 0x505000000000028 |
"Tenant image pull backoff error - delete tenant pod (%tenant/%s) (%node_no/%d)" |
| 0x505000000000029 |
"Failed to generate tenant token (%tenant/%s) (%msg/%s)" |
| 0x505000000000030 |
"Failed to update ip rules for tenant on node (%tenant/%s) (%node_no/%d)" |
| 0x505000000000031 |
"Restarting system tenant due to unhealthy event (%system_tenant/%s)" |
| 0x505000000000032 |
"Tenant not launched. Failed to find the node in a partition (%tenant/%s) (%node_no/%d)" |
| 0x505000000000033 |
"cmd failed (%cmd/%s) (%error/%s)" |
| 0x505000000000034 |
"Missing Tenant configurational data (%tenant/%s) (%error/%s)" |
| 0x505000000000035 |
"Error creating token for namespace (%namespace/%s)" |
| 0x505000000000036 |
"Error retrieving token for namespace (%namespace/%s) (%status_no/%d)" |
| 0x505000000000037 |
"Error creating service account for namespace (%namespace/%s)" |
| 0x505000000000038 |
"Error deleting service account for namespace (%namespace/%s)" |
| 0x505000000000039 |
"Error creating role for namespace (%namespace/%s)" |
| 0x505000000000040 |
"Error deleting role for namespace (%namespace/%s)" |
| 0x505000000000041 |
"Error creating role binding for namespace (%namespace/%s)" |
| 0x505000000000042 |
"Error deleting role binding for namespace (%namespace/%s)" |
| 0x505000000000043 |
"Error creating tenant namespace (%namespace/%s)" |
| 0x505000000000044 |
"Error removing tenant namespace (%namespace/%s)" |
| 0x505000000000045 |
"Error tenant namespace still in Terminating state (%namespace/%s)" |
| 0x505000000000047 |
"Error tenant namespace does not exist (%namespace/%s)" |
| 0x505000000000048 |
"Error creating RBAC for namespace (%namespace/%s)" |
| 0x505000000000049 |
"Qat Devices are not available on node (%tenant/%s) (%node_no/%d)" |
| 0x505000000000050 |
"Restarting f5-resource-manager due to unhealthy event or unavailability." |
| 0x505000000000051 |
"Failed to create ResourceManager (%type/%s)" |
| 0x505000000000052 |
"Failed to delete ResourceManager (%type/%s)" |
| 0x505000000000053 |
"Tenant XNETD event (%tenant/%s) (%event/%s)" |
| 0x505000000000054 |
"Tenant deployment cannot proceed as file is missing (%filename/%s)" |
| 0x505000000000055 |
"Failed to create the control plane network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000056 |
"Failed to delete the control network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000057 |
"Failed to create deployment (%tenant/%s) (%status_no/%d)" |
| 0x505000000000058 |
"Failed to delete deployment (%tenant/%s) (%status_no/%d)" |
| 0x505000000000059 |
"Failed to create bond network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000060 |
"Failed to delete bond network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000061 |
"Failed to create vnap network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000062 |
"Failed to delete vnap network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000063 |
"Failed to create sriov-ha network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000064 |
"Failed to delete sriov-ha network for tenant (%tenant/%s) (%status_no/%d)" |
| 0x505000000000065 |
"Stale tenant namespace exists, proceeding to delete it (%namespace/%s)" |
| 0x505000000000066 |
"Sending Gratuitous ARPs on tenant mgmt interfaces after controller failover." |
| 0x505000000000067 |
"Failed to create TenantHelper (%type/%s)" |
| 0x505000000000068 |
"Failed to save token for TenantHelper." |
| 0x505000000000069 |
"Failed to delete TenantHelper (%type/%s)" |
| 0x505000000000070 |
"Failed to create network-attachment-definition (%type/%s) (%rest/%d) (%status/%s)" |
| 0x505000000000071 |
"Failed to create deployment (%type/%s) (%rest/%d) (%status/%s)" |
| 0x505000000000072 |
"Failed to create service (%type/%s) (%rest/%d) (%status/%s)" |
| 0x505000000000073 |
"Cloud-init secret already exists (%name/%s)" |
| 0x505000000000074 |
"Failed to delete secret associated to cloud-init (%name/%s) (%ret/%d)" |
| 0x505000000000075 |
"Failed to convert image size for tenant image (%image/%s) (%result/%s) (%error/%s)" |
| 0x505000000000076 |
"Failed to calculate tenant image size (%image/%s) (%exit_code/%d) (%result/%s)" |
| 0x506000000000001 |
"Tenant configuration created (%tenant/%s)" |
| 0x506000000000002 |
"Tenant attempting to provision the resources (%tenant/%s) (%node_no/%d)" |
| 0x506000000000003 |
"Tenant attempting deploy (%tenant/%s) (%node_no/%d)" |
| 0x506000000000004 |
"Tenant deployed successfully (%tenant/%s) (%node_no/%d)" |
| 0x506000000000005 |
"Tenant attempting to stop (%tenant/%s) (%node_no/%d)" |
| 0x506000000000006 |
"Tenant attempting to delete (%tenant/%s) (%node_no/%d)" |
| 0x506000000000007 |
"Failed to get tenant(s) health from server (%rest/%d) (%status/%s)" |
| 0x506000000000008 |
"Failed to get node(s) health from server (%rest/%d) (%status/%s)" |
| 0x506000000000009 |
"Attempting to setup Tenant to Platform Network channel (%tenant/%s) (%node_no/%d)" |
| 0x506000000000010 |
"Tenant has unhealthy event (%event/%s) (%tenant/%s) (%node_no/%d)" |
| 0x506000000000011 |
"Tenant disk attempting to resize (%tenant/%s) (%size/%d)" |
| 0x506000000000012 |
"Tenant disk resized successfully (%tenant/%s) (%node_no/%d)" |
| 0x506000000000013 |
"Tenant is running successfully (%tenant/%s) (%node_no/%d)" |
| 0x506000000000014 |
"Tenant deployment failed (%tenant/%s) (%node_no/%d) (%result/%s)" |
| 0x506000000000015 |
"Tenant configuration deleted (%tenant/%s)" |
| 0x506000000000016 |
"Tenant deleted successfully (%tenant/%s) (%node_no/%d)" |
| 0x506000000000017 |
"Tenant stopped successfully (%tenant/%s) (%node_no/%d)" |
| 0x506000000000018 |
"Unhealthy event for tenant during upgrade (%tenant/%s) (%event/%s)" |
| 0x506000000000019 |
"Tenant to Platform Network channel setup done successfully (%tenant/%s) (%node_no/%d)" |
| 0x506000000000021 |
"Tenant resource provisioning successful (%tenant/%s) (%node_no/%d)" |
| 0x506000000000022 |
"Using spec path: (%path/%s)" |
| 0x506000000000024 |
"Error parsing (%path/%s) (%error/%s)" |
| 0x506000000000025 |
"Unable to validate spec file (%path/%s)" |
| 0x506000000000028 |
"Flag does not exist, skipping (%flag/%s)" |
| 0x506000000000029 |
"Got error code while checking existence of flag (%code/%d) (%flag/%s)" |
| 0x506000000000030 |
"Chassis serial number is invalid - do not attempt tenant deploy (%tenant/%s) (%node_no/%d)" |
| 0x506000000000032 |
"(%msg/%s) (%tenant/%s)" |
| 0x506000000000033 |
"(%msg/%s) (%tenant/%s)" |
| 0x506000000000034 |
"Successfully update CPU for tenant (%tenant/%s)" |
| 0x506000000000035 |
"Successfully update feature-flags for tenant (%tenant/%s)" |
| 0x506000000000036 |
"Successfully update float IP for tenant (%tenant/%s)" |
| 0x506000000000037 |
"Successfully update HA state for tenant (%tenant/%s)" |
| 0x506000000000039 |
"NodeAgent failed to process the request with error (%message/%s)" |
| 0x506000000000040 |
"Timeout waiting for response from NodeAgent (%tenant/%s) (%node_no/%d)" |
| 0x506000000000041 |
"Successfully update module-provision update for tenant (%tenant/%s)" |
| 0x506000000000042 |
"Failed to allocate memory for tenant (%tenant/%s) (%node_no/%d)" |
| 0x506000000000043 |
"Tenant interim upgrade status (%tenant/%s) (%event/%s) (%ret/%d)" |
| 0x506000000000044 |
"Tenant upgrade started (%tenant/%s)" |
| 0x506000000000045 |
"Tenant upgrade successful (%tenant/%s)" |
| 0x506000000000046 |
"Retrying tenant upgrade (%tenant/%s)" |
| 0x506000000000047 |
"Unable to post tenant upgrade result in confd on standby (%tenant/%s)" |
| 0x506000000000048 |
"Tenant upgrade failed (%tenant/%s)" |
| 0x506000000000049 |
"Tenant deployment failed due to insufficient CPUs (%tenant/%s) (%node_no/%d)" |
| 0x506000000000050 |
"Unable to post updated 4k memory to confd on standby (%tenant/%s)" |
| 0x506000000000051 |
"Tenant rollback is in progress (%tenant/%s)" |
| 0x506000000000052 |
"Stale Tenant upgrade finishing - Do not update confd (%tenant/%s) (%tenant_id/%d)" |
| 0x506000000000053 |
"Failed to delete the token file associated with the tenant namespace (%file/%s)" |
| 0x506000000000054 |
"Scaling down tenant deployments for memory allocation (%tenant/%s)" |
| 0x506000000000055 |
"Scaling up tenant deployments after memory allocation failed after multiple retries (%tenant/%s)" |
| 0x506000000000056 |
"Scaling down tenant deployments is successful (%tenant/%s)" |
| 0x506000000000057 |
"Retrying to create platform-agent pod for tenant (%tenant/%s)" |
| 0x506000000000058 |
"API lookup failed to determine what other types of nodes are in the partition (%node_no/%d)" |
| 0x506000000000059 |
"Tenant not launched. Incompatible tenants running on another node in the partition (%tenant/%s) (%node_no/%d)" |
| 0x506000000000060 |
"Successfully patched VM for tenant (%tenant/%s)" |
| 0x506000000000061 |
"Failed to patch VM for tenant (%tenant/%s)" |
| 0x506000000000062 |
"Node Agent is available (%node_no/%d)" |
| 0x506000000000063 |
"Node Agent is unavailable (%node_no/%d)" |
| 0x506000000000064 |
"Tenant ID mismatch found for VM (%running_id/%d) (%config_id/%d) (%tenant/%s)" |
| 0x506000000000065 |
"Tenant config sequence number mismatch detected, patching required (%running_seqno/%llu) (%config_seqno/%llu) (%tenant/%s)" |
| 0x506000000000066 |
"Initiated a patch operation to update tenant POD metadata (%tenant/%s)" |
| 0x506000000000067 |
"Tenant field changed (%tenant/%s) (%field/%s) (%oldval/%s) (%newval/%s)" |
| 0x507000000000001 |
"No available SR-IOV VF groups found" |
| 0x507000000000002 |
"SR-IOV VF Slot information is not available/updated for the tenant (%tenant/%s)" |
| 0x507000000000003 |
"Received invalid SR-IOV VF group id (%vfgroup/%d)" |
| 0x507000000000004 |
"Unable to fetch VFs pci address from filesystem" |
| 0x507000000000005 |
"Unable to fetch VF groups data from confd" |
| 0x507000000000006 |
"SR-IOV DP pod is at running/ready state, able to access VFs" |
| 0x507000000000007 |
"Failed to perform driver switch on SR-IOV VFs (%tenant/%s)" |
| 0x507000000000008 |
"Creation of net-attach-def failed for tenant (%tenant/%s)" |
| 0x507000000000009 |
"Deletion of net-attach-def failed for tenant (%tenant/%s)" |
| 0x507000000000010 |
"Stale tenant to SR-IOV VF group map found, proceeding to clean (%tenant/%s) (%tenant_id/%d) (%vfgroup/%d)" |
| 0x5701000000000001 |
"License Service starting, (%version/%s) (%date/%s)" |
| 0x5701000000000002 |
"License Service exiting." |
| 0x5701000000000003 |
"cdb_get failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5701000000000004 |
"(%func/%s): Memory allocation failed (%TYPE/%s)" |
| 0x5701000000000008 |
"(%func/%s): (%Execption/%s)" |
| 0x5701000000000010 |
"(%func/%s): (%Error/%s)" |
| 0x5701000000000011 |
"(%func/%s): Unable to create Mappi transaction (%ERRNO/%d) (%LASTERR/%s)" |
| 0x5701000000000012 |
"(%func/%s): License update transaction failed. retrying (%count/%d)" |
| 0x5701000000000013 |
"(%func/%s): Dossier is empty. Unable to fetch the system dossier" |
| 0x5701000000000014 |
"(%func/%s): Unable to instantiate LicenseCdbHandler Object" |
| 0x5701000000000015 |
"(%func/%s): Dossier instance creation failed" |
| 0x5701000000000016 |
"(%func/%s): Dossier init failed" |
| 0x5701000000000017 |
"(%func/%s): Getting Hashed Dossier failed" |
| 0x5701000000000018 |
"(%func/%s): Getting Encrypted Dossier failed" |
| 0x5701000000000019 |
"(%func/%s): Could not retrieve Chassis Reg Key from HAL" |
| 0x5701000000000020 |
"(%func/%s): Unable to instantiate LicenseActivationClient Object" |
| 0x5701000000000021 |
"(%func/%s): license can't be installed on Standby" |
| 0x5701000000000022 |
"(%func/%s): (%message/%s)" |
| 0x5701000000000023 |
"(%func/%s): Configuration set elem operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x5701000000000024 |
"(%func/%s): Configuration set elem2 operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x5701000000000025 |
"(%func/%s): Configuration delete operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x5701000000000026 |
"(%func/%s): Configuration get operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x5701000000000027 |
"(%func/%s): Dossier CDB Update failed" |
| 0x5701000000000028 |
"(%func/%s)Populating license details on startup" |
| 0x5701000000000029 |
"(%func/%s)Populating license details failed on startup" |
| 0x5701000000000030 |
"(%func/%s)License Installation is aborted" |
| 0x5701000000000033 |
"(%func/%s): License file creation failed (%ERROR/%s)" |
| 0x5701000000000037 |
"AUDIT - SERVICE_INDICATOR initializing system_license_service in FIPS 140-3 mode" |
| 0x5701000000000038 |
"Maapi complete transaction failed for fflags update. (%error/%s) (%error_no/%d)" |
| 0x5701000000000039 |
"License feature flags maapi_set_values failed. (%error/%s) (%error_no/%d)" |
| 0x5701000000000040 |
"License feature flags cdb_set_values failed. (%error/%s) (%error_no/%d)" |
| 0x5701000000000041 |
"License feature flags oper data set failed. (%error/%s) (%error_no/%d)" |
| 0x5701000000000042 |
"Password not provided with username in diagnostics proxy." |
| 0x5701000000000044 |
"(%msg/%s) : (%error/%s) (%error_no/%d)" |
| 0x5701000000000045 |
"(%msg/%s)" |
| 0x5701000000000046 |
"Proxy server is not set for license installation, proceeding without a proxy." |
| 0x5701000000000047 |
"Proxy-server URL is not valid, use the format ://:" |
| 0x5701000000000048 |
"(%func/%s): check-install returned with response as (%message/%s)" |
| 0x5801000000000001 |
"API service gateway starting (%VERSION/%s) (%DATE/%s)" |
| 0x5801000000000002 |
"UNUSED: API service gateway exiting" |
| 0x5801000000000003 |
"Memory allocation failed (%TYPE/%s)" |
| 0x5801000000000004 |
"Failed to read env variable (%VAR/%s)" |
| 0x5801000000000006 |
"Rejecting vlan (%VLAN/%d) for tenant (%TENANT/%s)" |
| 0x5801000000000007 |
"syncookie not supported message (%text/%s)" |
| 0x5801000000000008 |
"No environment variable NETWORK_PREFIX, using default network prefix 10.1" |
| 0x5801000000000009 |
"Env variable set (%VAR/%s) (%VALUE/%s)" |
| 0x5801000000000010 |
"Error during tmstat operation. (%API/%s) (%TBLNAME/%s) (%error/%s)" |
| 0x5801000000000011 |
"Waiting for self-signed certificates installation. (%MSG/%s)" |
| 0x5801000000000012 |
"self-signed crypto keys installation completed" |
| 0x5801000000000013 |
"API service gateway exiting" |
| 0x5801000000000015 |
"SERVICE_INDICATOR initializing api-svc-gateway in FIPS 140-3 mode" |
| 0x5803000000000001 |
"Read from cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000002 |
"Change Directory for cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000003 |
"Write to cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000004 |
"service-instance (%NAME/%s) not in cdb" |
| 0x5803000000000005 |
"Delete from cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000007 |
"service-instance (%NAME/%s) with nonzero submodule-id doesn't support (%FEATURE/%s)" |
| 0x5803000000000008 |
"cdb_get: (%PATH/%s) (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000009 |
"Key Hash (%TYPE/%s) (%HASH/%s)" |
| 0x5803000000000010 |
"Key header check failed (%HEADER/%s)" |
| 0x5803000000000011 |
"Crypto key installation failed: (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000012 |
"Read from cdb failed for virtual-wire: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000013 |
"Unexpected CONFD type for interface field (%INTERFACE/%s) (%FIELD/%s) (%EXPECTED/%d) (%ACTUAL/%d)" |
| 0x5803000000000017 |
"failed to parse sdag table (%TENANT/%s) (%TABLE/%s)" |
| 0x5803000000000018 |
"cdb_get: (%PATH/%s) (%KEY/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000019 |
"cdb_exists: (%PATH/%s) (%KEY/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000021 |
"Failed to look up physical slot. (%VIRTSLOT/%d)" |
| 0x5803000000000022 |
"Failed to look up virtual slot. (%PHYSSLOT/%d)" |
| 0x5803000000000023 |
"database get: (%PATH/%s) (%NODE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000024 |
"Failed to get backline link field from database. (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000025 |
"Processing missed backplane link event." |
| 0x5803000000000026 |
"Failed to find cdb path: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5803000000000027 |
"Unexpected CONFD type for subinterface field (%INTERFACE/%s) (%FIELD/%s) (%EXPECTED/%d) (%ACTUAL/%d)" |
| 0x5804000000000001 |
"Client Registration failed: (%ERRMSG/%s)" |
| 0x5804000000000002 |
"Client Subscription failed: (%ERRMSG/%s)" |
| 0x5804000000000003 |
"Client Deregistration failed: (%ERRMSG/%s)" |
| 0x5804000000000004 |
"Platform-Tenant connection API: (%MSG/%s)" |
| 0x5804000000000005 |
"tmstat error: (%ERRMSG/%s)" |
| 0x5804000000000006 |
"Primary slot notification: (%ERRMSG/%s)" |
| 0x5804000000000007 |
"UNUSED: Error in mssrequest: (%ERRMSG/%s)" |
| 0x5804000000000008 |
"Transform Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000009 |
"Secret Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000010 |
"DDoS Vector Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000011 |
"DDoS Tunable Params request failed: (%ERRMSG/%s)" |
| 0x5804000000000012 |
"Image version error: (%ERRMSG/%s)" |
| 0x5804000000000013 |
"DDoS WL Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000014 |
"BDoS Params request failed: (%ERRMSG/%s)" |
| 0x5804000000000015 |
"DDoS Vector Stats request failed: (%ERRMSG/%s)" |
| 0x5804000000000016 |
"Error in request from tenant (%TENANT/%s) (%FUNC/%s) (%TYPE/%s)" |
| 0x5804000000000017 |
"Vlan Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000018 |
"Stats query failed: (%ERRMSG/%s)" |
| 0x5804000000000019 |
"Error while configuring vlanset: (%ERRMSG/%s)" |
| 0x5804000000000020 |
"Error while fetching daglib: (%ERRMSG/%s)" |
| 0x5804000000000021 |
"delete api_client (%tenant/%s)" |
| 0x5804000000000024 |
"Incorrectly formatted peer, reject" |
| 0x5804000000000025 |
"Timeout processing L2 listener requests" |
| 0x5804000000000027 |
"No unit key was found in confd for tenant (%TENANT/%s)" |
| 0x5804000000000029 |
"Unit key could not be decrypted (%TENANT/%s) (%HASH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5804000000000030 |
"Unit key was not in a valid format (%TENANT/%s) (%HASH/%s)" |
| 0x5804000000000031 |
"Unit key hash did not match (%TENANT/%s) (%HASH/%s) (%HASHCALC/%s)" |
| 0x5804000000000032 |
"Processed primary slot notify request for tenant client (%tenant/%s)" |
| 0x5804000000000033 |
"Processed image version notify request for tenant client (%tenant/%s)" |
| 0x5804000000000034 |
"Processed register request for the tenant client (%tenant/%s)" |
| 0x5804000000000035 |
"Processed deregister request for tenant client (%tenant/%s)" |
| 0x5804000000000036 |
"Receive subscribe request from tenant client (%tenant/%s)" |
| 0x5804000000000037 |
"End of tenant client subscription for the tenant (%tenant/%s)" |
| 0x5804000000000038 |
"Fetching sdaglib (%size/%d)" |
| 0x5804000000000039 |
"Receive listener request from tenant client (%tenant/%s) (%instid/%d) (%listeners_count/%d) (%mac_masq_listeners_count/%d)" |
| 0x5804000000000040 |
"Listener request (%vlanname/%s) (%vlantag/%d) (%mac/%s) (%cmphash/%s) (%tunnel/%s) (%ipv6prefixlen/%d) (%daghash/%d) (%portadjust/%s) (%ipproto/%s) (%op/%d)" |
| 0x5804000000000041 |
"Network manager reply returned error (%errorcode/%d) (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%op/%d)" |
| 0x5804000000000042 |
"Network manager reply returned OK (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%op/%d)" |
| 0x5804000000000043 |
"primary slot notification: Tenant client is not registered (%tenant/%s)" |
| 0x5804000000000044 |
"primary slot notification: Tenant client not found in the tenant config database (%tenant/%s)" |
| 0x5804000000000045 |
"primary slot notification: Failed to write primary slot info to ConfD for tenant client (%tenant/%s)" |
| 0x5804000000000046 |
"image version notification: API client is not registered (%tenant/%s)" |
| 0x5804000000000047 |
"image version notification: API client not found in the tenant config database (%tenant/%s)" |
| 0x5804000000000048 |
"image version notification: Failed write of running image version (%tenant/%s)" |
| 0x5804000000000049 |
"Client Registration failed: API client already registered (%tenant/%s)" |
| 0x5804000000000050 |
"Client Registration failed: invalid API client (%tenant/%s)" |
| 0x5804000000000051 |
"Client Registration failed: API client not found in the tenant config database (%tenant/%s)"; |
| 0x5804000000000052 |
"Client Deregistration failed: API client is not registered (%tenant/%s)" |
| 0x5804000000000053 |
"Client Deregistration failed: invalid API client (%tenant/%s)" |
| 0x5804000000000054 |
"Client Subscription failed: API client is not registered (%tenant/%s)" |
| 0x5804000000000055 |
"Client Subscription failed: API client already subscribed (%tenant/%s)" |
| 0x5804000000000056 |
"Client Subscription failed: Initial notification to tenant client failed for the tenant (%tenant/%s)" |
| 0x5804000000000057 |
"Client Subscription: API client no longer subscribed (%tenant/%s)" |
| 0x5804000000000058 |
"Client Subscription failed: API client no longer in the tenant config database (%tenant/%s)" |
| 0x5804000000000059 |
"Client Subscription failed: Failed to send notification for the tenant (%tenant/%s)" |
| 0x5804000000000060 |
"Tenant deletion: API client is not registered (%tenant/%s)" |
| 0x5804000000000061 |
"Listener creation failed: API client is not registered (%tenant/%s)" |
| 0x5804000000000062 |
"Error while fetching daglib: API client is not registered (%tenant/%s)" |
| 0x5804000000000063 |
"Error while fetching feature info: (%ERRMSG/%s)" |
| 0x5804000000000064 |
"tenant state notification: API client is not registered (%tenant/%s)" |
| 0x5804000000000065 |
"tenant state notification: API client not found in the tenant config database (%tenant/%s)" |
| 0x5804000000000066 |
"tenant state notification: Failed cdb write of tenant state (%tenant/%s)" |
| 0x5804000000000067 |
"Receive notify tenant state request from API client (%tenant/%s)" |
| 0x5804000000000068 |
"Vnap Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000069 |
"Timeout processing Vnap request" |
| 0x5804000000000070 |
"tenant state notification: Failed cdb write of primary slot (%tenant/%s)" |
| 0x5804000000000071 |
"Unable to get platform type/unsupported platform type (%TENANT/%d)" |
| 0x5804000000000072 |
"Invalid token for the tenant (%TENANT/%s)" |
| 0x5804000000000073 |
"Token validation has failed for tenant (%TENANT/%d) with error (%ERROR/%s)" |
| 0x5804000000000074 |
"Failed to find tenant: (%TENANT/%s)" |
| 0x5804000000000075 |
"(%LOG/%s)" |
| 0x5804000000000078 |
"Platform key could not be decrypted (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5804000000000079 |
"Install crypt keys failed (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5804000000000080 |
"Listener mac masq request (%vlantag/%d) (%mac/%s) (%op/%d)" |
| 0x5804000000000081 |
"Network manager mac masquerade reply returned error (%errorcode/%d) (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%mac/%s) (%op/%d)" |
| 0x5804000000000082 |
"Network manager mac masquerade reply returned OK (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%mac/%s) (%op/%d)" |
| 0x5804000000000083 |
"Timeout processing Dag grpc requests" |
| 0x5804000000000084 |
"Dag gRPC request error: (%TENANT/%s) (%TYPE/%s)(%ERRMSG/%s)" |
| 0x5804000000000085 |
"Dag gRPC interal error: (%TENANT/%s) (%TYPE/%s)(%ERRMSG/%s)" |
| 0x5804000000000086 |
"gRPC Server failed to start, server will be inactive." |
| 0x5804000000000087 |
"Error occurred while processing listener request (%TENANT/%s) (%REASON/%s) (%VALUE/%s)" |
| 0x5804000000000088 |
"Error fetching Virtual-wire: (%ERRMSG/%s)" |
| 0x5804000000000089 |
"tenant state notification: API client not found in the tenant tmstat database (%tenant/%s)" |
| 0x5804000000000095 |
"virtual-wire not found in tenant (%tenant/%s) (%vwire/%s)" |
| 0x5804000000000097 |
"Virtual wire notification vlan (%vwire/%s) (%vlanid/%d)" |
| 0x5804000000000098 |
"Virtual wire notification vnet_if (%vnet/%s) (%iftype/%s) (%did/%d)" |
| 0x5804000000000101 |
"Tenant client deregistration in progress for: (%TENANTNAME/%s)" |
| 0x5804000000000102 |
"Tenant client subscription in progress for: (%TENANTNAME/%s)" |
| 0x5804000000000108 |
"Error in IPv4 inet_ntoa IP to string conversion" |
| 0x5804000000000109 |
"Error in IPv6 inet_ntop IP to string conversion" |
| 0x5804000000000110 |
"subscribe: API client is no longer registered (%service/%s) (%tenant/%s)" |
| 0x5804000000000111 |
"cluster subscribe: API client is not registered (%tenant/%s)" |
| 0x5804000000000112 |
"cluster subscribe: API client already subscribed (%tenant/%s)" |
| 0x5804000000000113 |
"cluster subscribe: Initial notification to API client failed (%tenant/%s)" |
| 0x5804000000000114 |
"cluster subscribe: notification to API client failed (%tenant/%s)" |
| 0x5804000000000115 |
"No registered stream client found (%tenant/%s)" |
| 0x5804000000000116 |
"Module provisioning Config request failed: (%ERRMSG/%s)" |
| 0x5804000000000117 |
"Module provisioning status request failed: (%ERRMSG/%s)" |
| 0x5805000000000001 |
"Error while registering message queues: (%ERRMSG/%s)" |
| 0x5805000000000002 |
"Error in Message queues(rcv): unexpected fpgamgr msg (%ID/%d)" |
| 0x5805000000000003 |
"Error in Message queues(rcv): fpga msg poll timeout" |
| 0x5805000000000004 |
"Error in Message queues(rcv): fpga msg bad status (%STATUS/%s) (%TYPE/%s) (%MODE/%s)" |
| 0x5805000000000005 |
"Bad return from Message Queue api (%FUNC/%s)" |
| 0x5805000000000006 |
"Running network manager Message Queue client at (%ADDR/%s)" |
| 0x5805000000000007 |
"Failure setting up FPGA Message Queue" |
| 0x5805000000000008 |
"Failure sending fpgamgr ddos msg, message queue not initialized. (%THREAD/%d) (%ID/%d) (%MODE/%s)" |
| 0x5805000000000009 |
"Failure deregistering FPGA Message Queue upon thread exit. (%THREAD/%d) (%ERR/%d)" |
| 0x5805000000000010 |
"No payload received in reply from F5OS platform component - (%COMPONENT/%s). Invalid reply" |
| 0x5805000000000011 |
"Failed to start Message Queue client. (%NAME/%s)" |
| 0x5805000000000012 |
"Reply handling for (%COMPONENT/%s): no callback for client_name (%CLIENT/%s), tenant_name (%TENANT/%s), instance (%INSTANCE/%d)" |
| 0x5901000000000001 |
"Datapath CP Proxy Starting. (%verion/%s) (%build_date/%s) (%msg_version_in_use/%d)" |
| 0x5901000000000002 |
"Doorbell setup error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000003 |
"Epoll operations error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000004 |
"DMAA connection error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000005 |
"Tenant connection error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000006 |
"CDB error reading field (%TENANTNAME/%s) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000007 |
"CDB error reading field (%TENANTID/%u) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000008 |
"CDB error field is missing (%TENANTNAME/%s) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000009 |
"Failed to find Tenant with Tenant Name (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000010 |
"Failed to find Tenant with Tenant ID (%TENANTID/%u) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000011 |
"Tenant ID missing from key value pairs" |
| 0x5901000000000012 |
"CDB error writing component state field (%FIELD/%s) (%VALUE/%d) (%SLOT/%d) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000013 |
"Failed to read environment variable (%VARIABLE/%s)" |
| 0x5901000000000014 |
"Failed to get Tenant Name for Tenant FD (%FD/%d)" |
| 0x5901000000000015 |
"Failed to write Tenant Service Instance (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000016 |
"Tenant Name not set when writing Tenant Service Instance (%TENANTID/%u)" |
| 0x5901000000000017 |
"Failed to delete Tenant Service Instance (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000018 |
"Failed to find internal Tenant record (%STAGE/%s) (%TENANTFD/%d) (%TENANTNAME/%s)" |
| 0x5901000000000019 |
"Failed to find internal Tenant record (%STAGE/%s) (%TENANTFD/%d)" |
| 0x5901000000000020 |
"Failure in waiting for DMA Agent to be ready (%STAGE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000021 |
"Failed to verify DMA Agent readiness. Exiting... (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000022 |
"Failed to read Control Plane keys. (%TENANTNAME/%s) (%SUBMODULE/%d) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000023 |
"Failed to find Tenant record by Tenant ID (%TENANTID/%u) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000024 |
"Failed to create event fd (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000025 |
"Configuration update error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000026 |
"Subscription error (%TYPE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000027 |
"Failed to handle sep enable message from tenant (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000028 |
"Failed to handle sep disable message from tenant (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000029 |
"Error in reading generic response message (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000030 |
"Substring not found in hugepath conversion (%TENANTNAME/%s)" |
| 0x5901000000000031 |
"Successfully handled operation. (%TYPE/%s)" |
| 0x5901000000000032 |
"Successfully handled operation. (%TENANTNAME/%s) (%TYPE/%s)" |
| 0x5901000000000033 |
"Successfully handled operation. (%TENANTNAME/%s) (%SUBMODID/%d) (%TYPE/%s)" |
| 0x5901000000000034 |
"Service Instance Update Success. (%TENANTNAME/%s) (%DOSGRP/%s) (%SVCGRP/%s) (%SVCID/%d)" |
| 0x5901000000000035 |
"Tenant fd attempt to double register (%TENANTNAME/%s) (%SUBMODULE/%d)" |
| 0x5901000000000036 |
"A system tenant with this Service ID is already registered (%TENANTNAME/%s) (%SVCID/%d)" |
| 0x5901000000000037 |
"Tenant Connection Information (%TYPE/%s) (%TENANTNAME/%s) (%SUBMODID/%d) (%MSG_VERSION/%d)" |
| 0x5901000000000038 |
"Failed to handle operation. (%TENANTNAME/%s) (%SUBMODID/%d) (%TYPE/%s) (%ERRNOSTR/%s)" |
| 0x5901000000000039 |
"Failed to update Service IDs (%OPERATION/%s) (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000040 |
"Duplicate tenant registration for name submodule pair (%TENANTNAME/%s) (%SUBMODULE/%d)" |
| 0x5901000000000042 |
"Old tenant connection version in use (%TYPE/%s) (%VERSION/%d)" |
| 0x5901000000000043 |
"No service ids available (%NAME/%s) (%SUBMODULE/%d)" |
| 0x5901000000000045 |
"Confd Event Update: (%EVENT/%s) (%FROM/%s) (%TENANTNAME/%s) (%ATSE/%u) (%SUBMODULE/%d)" |
| 0x5901000000000046 |
"Waiting to read initial tenant configuration." |
| 0x5901000000000047 |
"Setting up doorbell socket (%PATH/%s)" |
| 0x5901000000000048 |
"Invalid request type (%TYPE/%s) (%TENANTNAME/%s)" |
| 0x5901000000000049 |
"Successfully read initial tenant configuration." |
| 0x5901000000000050 |
"Failed to handle get info message from tenant (%TENANT/%s) (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000051 |
"Failed to handle system tenant registration (%SVCID/%d) (%TYPE/%s)" |
| 0x5901000000000052 |
"Bad Sep Group Response (%TENANT/%s) (%MAXATSE/%d) (%NUMSEPGRP/%d)" |
| 0x5901000000000054 |
"Failed to find Tenant record by Tenant Name (%TENANTNAME/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000055 |
"Failed to find doorbell FD associated with tenant FD (%TENANTFD/%d) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000056 |
"Error in configuring the tenant. (%TENANTNAME/%s) (%TYPE/%s) (%ERRNOSTR/%s)" |
| 0x5901000000000057 |
"Removing doorbell socket path. (%PATH/%s) (%METHOD/%s)" |
| 0x5901000000000058 |
"Error while removing doorbell socket path. (%PATH/%s) (%METHOD/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000059 |
"Failed to delete Service Instance table (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000060 |
"CDB error reading service instance field (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000062 |
"Enabling TCP-COP for tenant: (%TENANTNAME/%s) (%NEWTHRESHOLD/%f)" |
| 0x5901000000000063 |
"Disabling TCP-COP for tenant: (%TENANTNAME/%s)" |
| 0x5901000000000064 |
"Modifying TCP-COP Threshold for tenant: (%TENANTNAME/%s) (%OLDTHRESHOLD/%f) (%NEWTHRESHOLD/%f)" |
| 0x5901000000000065 |
"TCP-COP: Tenant FD is not found. (%TENANTNAME/%s)" |
| 0x5901000000000066 |
"TCP-COP: DMAA FD is not found. (%TENANTNAME/%s)" |
| 0x5901000000000067 |
"TCP-COP: Failed to send request to DMAA. (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x5901000000000068 |
"TCP-COP: Successfully sent request to the DMAA. (%NEWTHRESHOLD/%f)" |
| 0x5901000000000069 |
"TCP-COP: Read data for tenant. (%TENANTNAME/%s) (%STATUS/%s) (%THRESHOLD/%f)" |
| 0x5901000000000070 |
"System tenant service instance successfully written. (%NAME/%s) (%DID/%d)" |
| 0x5901000000000071 |
"Failed to update Num Seps (%OPERATION/%s) (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x5901000000000072 |
"Requested seps exceed allocated seps (%TYPE/%s) (%TENANTNAME/%s) (%REQUESTEDSEPS/%d) (%ALLOCATEDSEPS/%d)" |
| 0x5e01000000000001 |
"utils-agent starting (%version/%s) (%build_date/%s)" |
| 0x5e01000000000002 |
"utils-agent exiting" |
| 0x5e01000000000003 |
"SERVICE_INDICATOR initializing utils-agent in FIPS 140-3 mode" |
| 0x5e01000000000004 |
"file transfer thread (%info/%s)" |
| 0x5e01000000000005 |
"error in thread-pool (%error/%s)" |
| 0x5e01000000000006 |
"validation failed (%validation_error/%s)" |
| 0x5e01000000000007 |
"file path is not allowed (%file_path/%s) (%file_operation/%s)" |
| 0x5e01000000000008 |
"file transfer error (%error/%s)" |
| 0x5e01000000000009 |
"file transfer audit (%audit_log/%s)" |
| 0x5e01000000000010 |
"file transfer mode (%info/%s)" |
| 0x5e01000000000011 |
"file upload operation (%info/%s)" |
| 0x5e01000000000012 |
"file upload status (%info/%s)" |
| 0x5e01000000000013 |
"file upload validation (%info/%s)" |
| 0x5e01000000000014 |
"file upload error (%error/%s)" |
| 0x5e01000000000015 |
"failed to move file (%source/%s) (%destination/%s) (%error/%s)" |
| 0x5e01000000000016 |
"file upload permission/ownership error (%error/%s)" |
| 0x5e01000000000017 |
"file deletion failed (%status/%s) (%file_path/%s) (%error_no/%d) (%error/%s)" |
| 0x5e01000000000018 |
"known hosts file operation (%status/%s) (%file_path/%s) (%error_no/%d) (%error/%s)" |
| 0x5e01000000000019 |
"volume usage check (%info/%s)" |
| 0x5e01000000000020 |
"failed to set cdb value (%component/%s) (%error/%s) (%error_details/%s) (%error_no/%d)" |
| 0x5e01000000000021 |
"failed to get cdb value (%component/%s) (%error/%s) (%error_details/%s) (%error_no/%d)" |
| 0x5e01000000000022 |
"failed to create maapi transaction (%component/%s) (%error/%s) (%error_details/%s) (%error_no/%d)" |
| 0x5e01000000000023 |
"failed to complete maapi transaction (%component/%s) (%error/%s) (%error_details/%s) (%error_no/%d)" |
| 0x5e01000000000024 |
"CURL setup failed (%status/%s) (%error_no/%d)" |
| 0x5e01000000000025 |
"utils-agent (%info/%s)" |
| 0x5e01000000000026 |
"utils-agent (%status/%s) (%file_path/%s) (%error_no/%d) (%error/%s)" |
| 0x5f01000000000001 |
"fips-service starting. (%version/%s) (%build_date/%s)" |
| 0x5f01000000000002 |
"fips-service exiting" |
| 0x5f01000000000003 |
"fips monitoring started" |
| 0x5f01000000000005 |
"(%component/%s) Controller State is neither Active nor Standby. (%state/%s)" |
| 0x5f01000000000006 |
"FIPS error. (%component/%s) (%error/%s)" |
| 0x5f01000000000007 |
"Setting root account expiry-date is failed" |
| 0x5f01000000000008 |
"Failed to lock/unlock Always-On Management(AOM) Command Menu" |
| 0x5f01000000000009 |
"FIPS info. (%info/%s)" |
| 0x5f01000000000010 |
"FIPS ConfD error info. (%error/%s) (%confd_stderror/%s) (%confd_lasterr/%s) (%confd_error_no/%d)" |
| 0x5f01000000000011 |
"FIPS/CC error: Failed to reboot system, in component. (%component/%s), Error code (%error_no/%d)" |
| 0x5f01000000000012 |
"FIPS/CC error: Failed to read reboot counter from filesystem, Error code (%error_no/%d)" |
| 0x5f01000000000013 |
"Read reboot count from file system: (%reboot_count/%d)" |
| 0x5f01000000000014 |
"Reboot info. (%reboot_reason/%s)" |
| 0x5f01000000000015 |
"FIPS/CC error: Failed to reset reboot counter in filesystem, Error code (%error_no/%d)" |
| 0x5f01000000000016 |
"FIPS/CC error: Failed to sync fips directory, Error code (%error_no/%d)" |
| 0x5f01000000000017 |
"FIPS/CC error: Failed to sync fips error file (%file/%s), Error code (%error_no/%d)" |
| 0x5f01000000000018 |
"FIPS/CC: Entropy Health failure detected" |
| 0x5f01000000000019 |
"FIPS/CC: Error mode failure detected" |
| 0x5f01000000000020 |
"FIPS/CC: default handler triggered for file: (%file/%s)" |
| 0x5f01000000000021 |
"FIPS License is installed/enabled, rebooting the system" |
| 0x5f01000000000022 |
"FIPS License is disabled, rebooting the system" |
| 0x5f01000000000023 |
"Failed to set CDB path (%path/%s) (%error_no/%d) (%confdlasterr/%s)" |
| 0x5f01000000000024 |
"cdb_get failed for getting oper data (%component/%s) (%operdatapath/%s) (%error_no/%d) (%confdlasterr/%s)" |
| 0x5f01000000000025 |
"Failed to open the file (%path/%s), Error code (%error_no/%d)" |
| 0x5f01000000000026 |
"Reboot count file not created, Error code (%error_no/%d)" |
| 0x5f01000000000027 |
"start session failed, Error code (%error_no/%d) (%confdlasterr/%s)" |
| 0x5f01000000000028 |
"end session failed , Error code (%error_no/%d)" |
| 0x5f01000000000029 |
"set (%element/%s) element failed (%error_code/%s) (%error_details/%s) (%error_no/%d)" |
| 0x5f01000000000030 |
"AUDIT - SERVICE_INDICATOR initializing fips-service in FIPS 140-3 mode" |
| 0x5f01000000000033 |
"Failed to get partition id for partition (%name/%s)" |
| 0x5f01000000000034 |
"failed to start CDB_OPERATIONAL data session => (%confd_strerror_confd_error_no/%s)" |
| 0x5f01000000000035 |
"failed to set CDB name space => (%confd_strerror_confd_error_no/%s)" |
| 0x5f01000000000036 |
"Failed to connect to confd" |
| 0x5f01000000000037 |
"cdb_create failed for path (%path/%s) (%error_no/%d) (%confdlasterr/%s)" |
| 0x5f01000000000038 |
"Failed to reset integrity status (%error_no/%d) (%confdlasterr/%s)" |
| 0x5f01000000000039 |
"FIPS: Installed and packaged OpenSSL version mismatch, Error code (%error_no/%d)." |
| 0x5f01000000000040 |
"FIPS: OpenSSL version read successfully from host and container." |
| 0x5f01000000000041 |
"FIPS/CC: To avoid redundant integrity status checks, removing stale partition: (%partition/%d)" |
| 0x5f01000000000042 |
"FIPS/CC: Integrity status check (%message/%s) (%file/%s)." |
| 0x5f01000000000043 |
"FIPS/CC: Failed integrity status check (%message/%s) (%file/%s)." |
| 0x5f01000000000044 |
"FIPS/CC: (%error/%s)." |
| 0x5f01000000000045 |
"Failed with error (%error_no/%d): (%error_code/%s)" |
| 0x5f01000000000046 |
"Controller path creation failed: ConfD database not ready after timeout (5 minutes)" |
| 0x5f01000000000047 |
"Invalid ConfD path badpath (%path/%s)" |
| 0x5f01000000000048 |
"Password policy has been updated in compliance with Common Criteria." |
| 0x5f01000000000049 |
"Controller in standby mode. Waiting for peer reboot to update Common-Criteria prerequisiste." |
| 0x5f01000000000050 |
"Waiting for the controller to reboot after configuring ccmode." |
| 0x5f01000000000051 |
"Common Criteria config matches state data." |
| 0x5f01000000000052 |
"fips-service might have restarted." |
| 0x5f01000000000053 |
"maapi create transaction failed for (%component/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000054 |
"Path exists in ConfD. (%component/%s) (%path/%s)" |
| 0x5f01000000000055 |
"maapi exists failed for path. (%component/%s) (%path/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000056 |
"maapi change directory failed for (%component/%s) (%path/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000057 |
"maapi_set failed for (%component/%s) (%path/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000058 |
"maapi_get failed for (%component/%s) (%path/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000059 |
"maapi complete transaction failed for (%component/%s) (%path/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000060 |
"maapi transaction failed. (%component/%s) (%info/%s)" |
| 0x5f01000000000061 |
"maapi start transaction failed. (%component/%s) (%error_code/%s) (%error_no/%d)" |
| 0x5f01000000000062 |
"Login banner update failed." |
| 0x5f01000000000063 |
"Updated ccmode configured value on host. (%value/%s) (%file/%s)" |
| 0x5f01000000000065 |
"Applaiance Mode is configured by user. (%value/%s) (%root_password/%s)" |
| 0x5f01000000000068 |
"FIPS/CC: Change of integrity check status settings to default is done for OS and services. (%component/%s)" |
| 0x5f01000000000070 |
"Failed to get attribute value from sw-mgmt. (%component/%s) (%attribute/%s)" |
| 0x5f01000000000071 |
"No response from sw-mgmt for attribute. (%component/%s) (%attribute/%s)" |
| 0x5f01000000000072 |
"Failed to construct FIPS module name. (%component/%s)" |
| 0x5f01000000000073 |
"updated deny-root-ssh. (%component/%s) (%value/%s)" |
| 0x5f01000000000074 |
"Failed to update deny-root-ssh. (%component/%s) (%value/%s)" |
| 0x5f01000000000075 |
"Failed to execute command. (%component/%s) (%command/%s)" |
| 0x5f01000000000076 |
"Received exception while executing command. (%component/%s) (%command/%s) (%exception/%s)" |
| 0x5f01000000000077 |
"Failed to get response from sw-mgmt. (%component/%s)" |
| 0x5f01000000000078 |
"inotify_init1 failed. (%component/%s)" |
| 0x5f01000000000079 |
"Failed to initialize FIPS error watch. (%component/%s)" |
| 0x5f01000000000080 |
"Failed to fetch attribute. (%component/%s) (%attribute/%s)" |
| 0x5f01000000000081 |
"Zeroization failed. (%component/%s) (%reason/%s)" |
| 0x5f01000000000082 |
"FipsModeZeroizeRun: User denied zeroization on proceed state. (%component/%s)" |
| 0x5f01000000000083 |
"FipsModeZeroizeRun: Failed to reboot. (%component/%s) (%platform/%s)" |
| 0x5f01000000000084 |
"OpenSSL version check failed. (%component/%s) (%reason/%s)" |
| 0x5f01000000000085 |
"Failed to set zeroization status in ConfD. (%component/%s) (%value/%s)" |
| 0x5f01000000000086 |
"Default partition is created from fips-service." |
| 0x5f01000000000087 |
"FIPS mode value mismatch detected." |
| 0x5f01000000000088 |
"Updating to FIPS mode. (%component/%s)" |
| 0x5f01000000000089 |
"Spawning update thread. (%component/%s) (%thread/%s)" |
| 0x5f01000000000090 |
"FIPS Integrity info. (%component/%s) (%info/%s)" |
| 0x5f01000000000091 |
"Status of create FIPS ready sentinel after successful Integrity status check. (%status/%s)" |
| 0x5f01000000000092 |
"FIPS Zeroization process initiated. (%component/%s) (%system_type/%s)" |
| 0x5f01000000000093 |
"Operation starting. (%operation/%s) (%component/%s) (%status/%s)" |
| 0x5f01000000000094 |
"Phase completed. (%component/%s) (%operation/%s) (%result/%s) (%processed/%d) (%failed/%d) (%attempt/%d)" |
| 0x5f01000000000095 |
"Operation failed. (%component/%s) (%operation/%s) (%error/%s) (%errno/%d)" |
| 0x5f01000000000096 |
"Retrying operation. (%component/%s) (%operation/%s) (%attempt/%d) (%max_attempts/%d)" |
| 0x5f01000000000097 |
"Item processed. (%component/%s) (%item_type/%s) (%item_name/%s)" |
| 0x5f01000000000098 |
"Item skipped. (%component/%s) (%item_type/%s) (%item_name/%s) (%reason/%s)" |
| 0x5f01000000000099 |
"Item failed. (%component/%s) (%item_type/%s) (%item_name/%s) (%error/%s) (%errno/%d)" |
| 0x5f01000000000100 |
"Enumeration result. (%component/%s) (%target/%s) (%count/%d) (%source/%s)" |
| 0x5f01000000000101 |
"Operation attempt. (%operation/%s) (%attempt/%d) (%max_attempts/%d) (%component/%s)" |
| 0x5f01000000000102 |
"Operation attempt. (%operation/%s) (%attempt/%d) (%max_attempts/%d) (%component/%s) (%detail/%s)" |
| 0x5f01000000000103 |
"Executing zeroization script. (%component/%s) (%script/%s) (%parameters/%s)" |
| 0x5f01000000000104 |
"Script execution failed. (%component/%s) (%exit_code/%d) (%error/%s)" |
| 0x5f01000000000105 |
"FIPS Zeroization completed successfully. (%component/%s) (%result/%s)" |
| 0x5f01000000000106 |
"Zeroization complete. Initiating reboot sequence. (%component/%s) (%targets/%s)" |
| 0x5f01000000000107 |
"Zeroization status update. (%component/%s) (%status/%s)" |
| 0x5f01000000000108 |
"Skipping zeroization status update on standby. (%component/%s) (%reason/%s)" |
| 0x5f01000000000109 |
"Partition reset initiated. (%component/%s) (%status/%s)" |
| 0x5f01000000000110 |
"Partition reset completed. (%component/%s) (%result/%s)" |
| 0x5f01000000000111 |
"Partition reset failed. (%component/%s) (%reason/%s)" |
| 0x5f01000000000112 |
"Database status update. (%component/%s) (%object/%s) (%operation/%s)" |
| 0x5f01000000000113 |
"File validation. (%component/%s) (%file_path/%s) (%status/%s)" |
| 0x6001000000000001 |
"LLDP daemon starting, (%version/%s) (%date/%s)" |
| 0x6001000000000002 |
"LLDP daemon exiting." |
| 0x6001000000000003 |
"LLDP Datapath Handler is NULL." |
| 0x6001000000000004 |
"LLDPD Datapath Initialization failed." |
| 0x6001000000000005 |
"eSetTimer Failed. LLDPD failed to start." |
| 0x6001000000000006 |
"Non LLDP PDU received and dropped on interface: (%ifName/%s)." |
| 0x6001000000000007 |
"LLDP Mgmt socket creation failed" |
| 0x6001000000000008 |
"Building LLDP PDU failed: Unable to obtain SRC MAC for interface: (%ifName/%s)." |
| 0x6001000000000009 |
"Building LLDP PDU failed: Unable to obtain System Serial Number." |
| 0x6001000000000013 |
"Unexpected STP configuration. (%DESCRIPTION/%s)" |
| 0x6001000000000014 |
"CDB get operation failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6001000000000015 |
"Unable to start confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6001000000000016 |
"LLDP neighbour update failed (%ifName/%s) and (%nbid/%s)" |
| 0x6001000000000017 |
"LLDP neighbour remove failed (%ifName/%s) and (%nbid/%s)" |
| 0x6001000000000018 |
"CDB set operation failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6001000000000020 |
"SEP Client spec is Opened." |
| 0x6001000000000021 |
"SEP library in ERR state." |
| 0x6001000000000022 |
"Failed to receive packet." |
| 0x6001000000000023 |
"PDU resource is out of memory." |
| 0x6001000000000024 |
"Failed to send PDU packet." |
| 0x6001000000000025 |
"(%phyPort/%d) is reserved and not used." |
| 0x6001000000000031 |
"(%msg/%s)" |
| 0x6001000000000033 |
"(%msg/%s) (%value/%s)" |
| 0x6001000000000035 |
"ZMQ set up failed for send request." |
| 0x6001000000000036 |
"Failed to mkdir for SEP Client Connection (%ERROR/%s) (%ERRNO/%d)" |
| 0x6101000000000001 |
"UNUSED: Failed to open socket ds." |
| 0x6101000000000002 |
"UNUSED: Failed to open socket ss." |
| 0x6101000000000003 |
"UNUSED: Failed to open socket ods" |
| 0x6101000000000004 |
"UNUSED: Failed to open socket od2." |
| 0x6101000000000005 |
"UNUSED: Duplicate Interface object. (%key/%s)" |
| 0x6101000000000006 |
"UNUSED: Interface object not found. (%key/%s)" |
| 0x6101000000000007 |
"UNUSED: Duplicate trunk object. (%key/%s)" |
| 0x6101000000000008 |
"UNUSED: Trunk object not found. (%key/%s)" |
| 0x6101000000000009 |
"UNUSED: Duplicate trunk config member. (%key/%s)" |
| 0x6101000000000010 |
"UNUSED: Try to Add an invalid Config Mbr Ignored! (%key/%s)" |
| 0x6101000000000011 |
"UNUSED: Trunk config member object not found. (%key/%s)" |
| 0x6101000000000012 |
"UNUSED: Trunk config member object not found. (%port/%d)" |
| 0x6101000000000013 |
"UNUSED: Link Actor Out of Sync. (%key/%s)" |
| 0x6101000000000014 |
"UNUSED: Link Partner Out of Sync. (%key/%s)" |
| 0x6101000000000015 |
"UNUSED: iter_ret: unexpected op. (%path/%s) (%op/%d)" |
| 0x6101000000000016 |
"UNUSED: initMsgHandler failed." |
| 0x6101000000000017 |
"UNUSED: connect failed with no fd!" |
| 0x6101000000000018 |
"UNUSED: Poll failed." |
| 0x6101000000000019 |
"UNUSED: Too many poll failures, terminating." |
| 0x6101000000000020 |
"UNUSED: Internal link is AVAILABLE. (%key/%s)" |
| 0x6101000000000021 |
"UNUSED: Link added to aggregation. (%key/%s)" |
| 0x6101000000000022 |
"UNUSED: Internal link is UNAVAILABLE. (%key/%s)" |
| 0x6101000000000023 |
"UNUSED: Link removed from aggregation. (%key/%s)" |
| 0x6101000000000024 |
"UNUSED: Interface (%key/%s) (%admin_status/%s) (%link_sattus/%s) (%duplex/%s) (%lacp_satte/%s)" |
| 0x6101000000000025 |
"STPD starting. (%version/%s) (%date/%s)" |
| 0x6101000000000026 |
"(%mode/%s) (%treenum/%d)] Root change failed: new root=(%newroot/%s) regionalRoot=(%rroot/%s)" |
| 0x6101000000000027 |
"Error while adding the tree (%treeNum/%u): (%err/%s)" |
| 0x6101000000000028 |
"Error while removing the tree (%treeNum/%u): (%err/%s)" |
| 0x6101000000000029 |
"failed to set STP instance (%treeNum/%u) parameters: (%err/%s)" |
| 0x6101000000000030 |
"init BpduMsgHandler failed. (%reason/%s) (%err/%d)" |
| 0x6101000000000031 |
"failed to set bridge parameters: (%err/%s)" |
| 0x6101000000000032 |
"Write MSTP config name to Confd is (%ret/%s)" |
| 0x6101000000000033 |
"Failed to set RSTP global stats" |
| 0x6101000000000034 |
"Failed to set RSTP ifc stats (%ifc/%s)" |
| 0x6101000000000035 |
"Unsupported port role error (%role/%d)" |
| 0x6101000000000036 |
"fatal error: (%err/%s)" |
| 0x6101000000000037 |
"Failed to disable the port (%port/%u) in this spanning tree instance (%tree/%u): (%err/%s)" |
| 0x6101000000000038 |
"Failed to enable the port (%port/%u) in this spanning tree instance (%tree/%u): (%err/%s)" |
| 0x6101000000000039 |
"Failed to get spanning tree instance per-port parameters ((%tree/%u), (%port/%u)): (%err/%s)" |
| 0x6101000000000040 |
"Failed to set spanning tree instance per-port parameters ((%tree/%u), (%port/%u)): (%err/%s)" |
| 0x6101000000000041 |
"Caught a fatal exception: (%err/%s)" |
| 0x6101000000000042 |
"Received duplicate ConfD create request for VLAN (%vlan/%s)" |
| 0x6101000000000043 |
"Received ConfD modify request for nonexistent VLAN (%vlan/%s)" |
| 0x6101000000000044 |
"Received ConfD object delete request for nonexistent VLAN (%vlan/%s)" |
| 0x6101000000000045 |
"UNUSED: Unsupported port state error (%portstate/%d)" |
| 0x6101000000000046 |
"stp_vlan_mbr references nonexistent VLAN (%name/%s)" |
| 0x6101000000000047 |
"stp_vlan_mbr references nonexistent STP instance (%treeNum/%u)" |
| 0x6101000000000048 |
"UNUSED: Failed to set MSTP global stats" |
| 0x6101000000000049 |
"Failed to set MSTP instance stats (%inst/%d)" |
| 0x6101000000000050 |
"Failed to set MSTP ifc stats (%inst/%d) (%ifc/%s)" |
| 0x6101000000000051 |
"(%mode/%s) (%treeNum/%d)] Port Role change failed: (%interface/%s) = (%role/%s)" |
| 0x6101000000000052 |
"(%mode/%s) (%treeNum/%d)] Port State change failed: (%interface/%s) = (%state/%s)" |
| 0x6101000000000053 |
"(%info_str/%s)" |
| 0x6101000000000054 |
"(%err_str/%s)" |
| 0x6101000000000056 |
"Fatal error, application exit (%fatal_str/%s)" |
| 0x6101000000000057 |
"Error in RX packet, len is negative" |
| 0x6101000000000058 |
"Error in RX packet, length (%length/%d) too short" |
| 0x6101000000000059 |
"Error in RX packet, unknown port: (%unknown_port/%s), did is (%did/%d)" |
| 0x6102000000000001 |
"UNUSED: Failed to load schemas from confd." |
| 0x6102000000000002 |
"UNUSED: Confd connect(ds) failed. (%status/%d)" |
| 0x6102000000000003 |
"UNUSED: Confd connect(ss) failed. (%status/%d)" |
| 0x6102000000000004 |
"UNUSED: Confd subscribe(ss) failed. (%status/%d)" |
| 0x6102000000000005 |
"UNUSED: Confd subscribe_done(ss) failed. (%status/%d)" |
| 0x6102000000000006 |
"UNUSED: Confd connect(ods) failed. (%status/%d)" |
| 0x6102000000000007 |
"UNUSED: Confd connect(od2) failed. (%status/%d)" |
| 0x6102000000000008 |
"UNUSED: Confd connect(oss) failed. (%status/%d)" |
| 0x6102000000000009 |
"UNUSED: Confd oper_subscribe(oss). (%path/%s) (%status/%d)" |
| 0x6102000000000010 |
"UNUSED: Confd isubscribe_done(oss). (%status/%d)" |
| 0x6102000000000011 |
"UNUSED: Confd start_session(od) failed. (%status/%d)" |
| 0x6102000000000012 |
"UNUSED: Confd start_session(ods) failed. (%status/%d)" |
| 0x6102000000000013 |
"UNUSED: Confd start_session(ds) failed. (%status/%d)" |
| 0x6102000000000014 |
"UNUSED: Connected to Confd CBD." |
| 0x6102000000000015 |
"UNUSED: Not connected to Confd CBD." |
| 0x6102000000000016 |
"UNUSED: STPD receive info from Confd on trunk. (%name/%s)" |
| 0x6102000000000017 |
"UNUSED: STPD receive info from Confd on interface. (%name/%s)" |
| 0x6102000000000018 |
"Failed to write to cdb (%FIELD/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6102000000000019 |
"Failed to delete from cdb (%FIELD/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6102000000000020 |
"Invalid interface name" |
| 0x6102000000000021 |
"UNUSED: cdb_get failed for interface (%INTERFACE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000022 |
"UNUSED: cdb_cd failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000023 |
"UNUSED: Unexpected vlan tag type (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000024 |
"UNUSED: Stpd is restarting to failover to the other controller" |
| 0x6102000000000025 |
"UNUSED: Unexpected mstp vlan tag type (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000026 |
"Error occurred in read_initial (%REASON/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000027 |
"Error occurred during cdb read (%REASON/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000028 |
"Error occurred during cdb set (%REASON/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6102000000000029 |
"Update phy port did (%did/%d) for interface (%interface/%s)" |
| 0x6201000000000001 |
"internal error (%CODE/%d)" |
| 0x6201000000000002 |
"internal event (%CODE/%d)" |
| 0x6201000000000003 |
"NETWORK_PREFIX environment variable is not set; exiting" |
| 0x6201000000000004 |
"unable to create the LOPD socket; exiting (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000005 |
"unable to set socket options on the LOPD socket; exiting (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000006 |
"unable to bind to the LOPD socket; exiting (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000007 |
"unable to open the LOP serial device; exiting (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000008 |
"unable to get LOP serial device attributes (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000009 |
"unable set LOP serial device attributes (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000010 |
"timed out while waiting for LOP response" |
| 0x6201000000000011 |
"unable to poll for I/O events (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6201000000000012 |
"LOP daemon (LOPD) starting" |
| 0x6201000000000013 |
"LOP daemon (LOPD) exiting" |
| 0x6201000000000014 |
"using network prefix (%PREFIX/%s)" |
| 0x6201000000000015 |
"out of memory to store LOP messages; exiting" |
| 0x6201000000000016 |
"unable to determine the current log level" |
| 0x6201000000000017 |
"response mismatch (%OBJECT/%s) (%EXPECTED/%s)" |
| 0x6201000000000018 |
"response invalid; discarding it (%OBJECT/%s)" |
| 0x6201000000000019 |
"invalid destination slot ID for outgoing GET/SET request; discarding it (%OBJECT/%s) (%SLOT_ID/%x)" |
| 0x6201000000000020 |
"invalid destination slot ID for outgoing ALERT/NOTIFY request; discarding it (%OBJECT/%s) (%SLOT_ID/%x)" |
| 0x6201000000000021 |
"console redirection is not connected; sending disconnection response" |
| 0x6201000000000022 |
"LOP daemon LOPD starting (%VERSION/%s) (%DATE/%s)" |
| 0x6201000000000023 |
"caught SIGHUP signal; shutting down" |
| 0x6201000000000024 |
"caught SIGINT signal; shutting down" |
| 0x6201000000000025 |
"caught SIGQUIT signal; shutting down" |
| 0x6201000000000026 |
"caught SIGTERM signal; shutting down" |
| 0x6201000000000027 |
"LOP daemon LOPD exiting" |
| 0x6202000000000001 |
"unable to read from LOP serial device (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6202000000000002 |
"EOF reading from LOP serial device" |
| 0x6202000000000003 |
"unable to write to LOP serial device; exiting (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6202000000000004 |
"received serial message from LOP exceeds buffer size; discarding it" |
| 0x6202000000000005 |
"encapsulated serial data from LOP exceeds buffer size; discarding it" |
| 0x6202000000000006 |
"encapsulated serial data from LOP contains unescaped flag byte; discarding it" |
| 0x6202000000000007 |
"encapsulated serial data from LOP ends with escape byte; discarding it" |
| 0x6202000000000008 |
"received serial message with unexpected object action; discarding it (%OBJECT/%s)" |
| 0x6202000000000009 |
"LOP has disconnected from serial interface; exiting" |
| 0x6202000000000010 |
"unable to de-encapsulate data from LOP; exiting" |
| 0x6202000000000011 |
"received serial message too short; discarding it (%LEN/%u) (%EXPECTED/%u)" |
| 0x6202000000000012 |
"received serial message with CRC mismatch; discarding it" |
| 0x6202000000000013 |
"received serial message not OK; discarding it" |
| 0x6202000000000014 |
"unable to encapsulate serial data for LOP; exiting" |
| 0x6203000000000001 |
"unable to send message on the network; exiting (%ADDR/%s) (%PORT/%d) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6203000000000002 |
"unable to read message from the network (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6203000000000003 |
"zero length message read from the network" |
| 0x6203000000000004 |
"unable to process received network message address; exiting" |
| 0x6203000000000005 |
"received network message too short; discarding it (%LEN/%d) (%EXPECTED/%u)" |
| 0x6203000000000006 |
"received network message with CRC mismatch; discarding it (%ADDR/%s) (%PORT/%d)" |
| 0x6203000000000008 |
"unable to convert message address; discarding it (%ADDR/%s)" |
| 0x6203000000000009 |
"failed to convert message address; discarding it (%ADDR/%s) (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x6701000000000002 |
"Failed to delete service pod. (%details/%s)" |
| 0x6701000000000004 |
"INFO. (%details/%s)" |
| 0x6701000000000005 |
"Failed to install IP table rules. (%command/%s) (%rc/%d) (%retry/%d)" |
| 0x6701000000000006 |
"Failed to install IP table rules. (%command/%s) (%rc/%d)" |
| 0x6701000000000007 |
"Caught an exception (%details/%s) (%func/%s)" |
| 0x6701000000000008 |
"Error while executing service health API. (%func/%s) (%API/%s) (%ret/%d)" |
| 0x6701000000000009 |
"Cannot setup environment for Orchestration Manager (%reason/%s)" |
| 0x6701000000000013 |
"(%func/%s) Waiting for /var/F5/system/AFU_COMPLETE file" |
| 0x6701000000000014 |
"(%func/%s) AFU is completed, proceed for K3S installation" |
| 0x6701000000000015 |
"SW-MGMT socket error (%details/%s) (%arg/%s)" |
| 0x6704000000000001 |
"ERROR (%details/%s)." |
| 0x6705000000000001 |
"ERROR: Failed to install CNI plugin. (%CNI/%s) (%ERROR/%d) (%REF_LOG/%s)" |
| 0x6705000000000002 |
"ERROR: Failed to uninstall CNI plugin. (%CNI/%s) (%ERROR/%d) (%REF_LOG/%s)" |
| 0x6705000000000003 |
"Installing CNI plugin. (%CNI/%s)" |
| 0x6705000000000004 |
"Error: Failure during CNI installation process. (%STEP/%s) (%ERROR/%d)" |
| 0x6705000000000005 |
"Error: Failed to install IP rules. (%ERROR/%d) (%REF_LOG/%s)" |
| 0x6705000000000006 |
"Cluster install state change. (%func/%s) (%Stage/%s) (%oldstate/%s) (%newstate/%s) (%details/%s)" |
| 0x6705000000000007 |
"Appliance is NOT ready in k3s cluster. (%id/%d) (%reason/%s)" |
| 0x6705000000000008 |
"Appliance is ready in k3s cluster. (%id/%d) (%reason/%s)" |
| 0x6707000000000001 |
"Failed to set value in Database. (%func/%s) (%xpath/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6707000000000002 |
"Failed to delete entry in Database. (%func/%s) (%xpath/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6707000000000003 |
"Failed to create entry in Database. (%func/%s) (%xpath/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6707000000000004 |
"Failed to create a session to Database. (%func/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6801000000000001 |
"User Manager Starting. (%VERSION/%s) (%DATE/%s)" |
| 0x6801000000000002 |
"User Manager Exiting, (%VERSION/%s) (%DATE/%s)" |
| 0x6801000000000003 |
"Change password operation failed (%USER/%s)" |
| 0x6801000000000004 |
"Set password operation failed (%USER/%s)" |
| 0x6801000000000008 |
"Failed to start USER_MANAGER Health Monitor" |
| 0x6801000000000009 |
"Failed to stop USER_MANAGER Health Monitor" |
| 0x6801000000000013 |
"(%SRC_USER/%s) password applied to (%DEST_USER/%s)" |
| 0x6801000000000015 |
"New user added (%USER/%s)" |
| 0x6801000000000016 |
"User removed (%USER/%s)" |
| 0x6801000000000017 |
"User added (%USER/%s)" |
| 0x6801000000000018 |
"SERVICE_INDICATOR initializing user-manager in FIPS 140-3 mode" |
| 0x6801000000000019 |
"AUDIT - SERVICE_INDICATOR (%USER/%s) (%MSG/%s)" |
| 0x6801000000000020 |
"Authentication response truncated" |
| 0x6801000000000021 |
"Problem with retrieving user - user not found" |
| 0x6801000000000022 |
"Unable to retrieve primary group name" |
| 0x6801000000000023 |
"Problem retrieving groups - malloc failed" |
| 0x6801000000000024 |
"Error in run unable to set up" |
| 0x6801000000000025 |
"ZMQ recv setup Failed." |
| 0x6801000000000026 |
"ZMQ Registering end point Failed." |
| 0x6801000000000027 |
"Un authorized user name (%user_name/%s) grpstrbuf (%grpstr/%s)" |
| 0x6801000000000028 |
"Could not parse Request" |
| 0x6801000000000029 |
"Failed to fork child process" |
| 0x6801000000000030 |
"Failed to launch auth info process" |
| 0x6801000000000031 |
"Failed to get authorization info" |
| 0x6801000000000032 |
"Invalid authorized_key attempted for user." |
| 0x6801000000000033 |
"Administrative user set-password for target user.(%USER/%s)(%TARGET/%s)" |
| 0x6801000000000034 |
"Administrative user set-password succeeded for target user.(%USER/%s)(%TARGET/%s)" |
| 0x6801000000000035 |
"set-password failed.(%USER/%s)(%MSG/%s)" |
| 0x6801000000000036 |
"change-password started.(%USER/%s)" |
| 0x6801000000000037 |
"change-password succeeded.(%USER/%s)" |
| 0x6801000000000038 |
"change-password failed.(%USER/%s)(%MSG/%s)" |
| 0x6801000000000039 |
"User password corrupted. Must be reset with set-password.(%USER/%s)" |
| 0x6801000000000040 |
"LDAP API error during operation. (%oper/%s) (%code/%d) (%msg/%s)" |
| 0x6801000000000044 |
"Mapping remote-gid from group name. (%filter/%s) (%localgid/%d) (%remotegid/%d)" |
| 0x6801000000000045 |
"Error while querying LDAP group information for remote-gid mapping. (%filter/%s)" |
| 0x6801000000000046 |
"Group name mapping for remote-gid requested but LDAP is not properly configured. (%filter/%s)" |
| 0x6801000000000047 |
"LDAP configuration could not be loaded. (%filter/%s)" |
| 0x6801000000000048 |
"Failed to read opasswd file." |
| 0x6801000000000049 |
"User account created with tenant console role but no corresponding tenant with that name exists. (%USER/%s)" |
| 0x6801000000000050 |
"Mapping local GID. Querying LDAP server for remote group IDs. (%filter/%s) (%localgid/%d)" |
| 0x6801000000000051 |
"Fatal! Unable to open the file:(%filename/%s) (%errno/%s)" |
| 0x6801000000000052 |
"(%msg/%s) (%data/%s)" |
| 0x6801000000000053 |
"Fatal! Unable to rename the file:(%tmpfile/%s) to (%filename/%s) (%errno/%s)" |
| 0x6802000000000001 |
"cdb_get failed for (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6802000000000002 |
"Could not write database (%OBJECT/%s) (%FIELD/%s) (%ERR/%s)" |
| 0x6802000000000005 |
"Could not read database (%ERR/%s)" |
| 0x6802000000000006 |
"cdb_exists failed, (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6802000000000007 |
"Could not write database (%OBJECT/%s) (%ERR/%s)" |
| 0x6802000000000008 |
"Failed to complete Mappi transaction. (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6802000000000009 |
"maapi_exists failed, (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6802000000000010 |
"cdb_get failed (%ret/%d) (%confd_errno/%d) (%fmt/%s)" |
| 0x6802000000000011 |
"Error updating remote_gid from group name mapping (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6802000000000012 |
"Error initializing confd writer (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6802000000000013 |
"(%msg/%s)" |
| 0x6803000000000001 |
"Password changed successfully for user. (%user/%s)" |
| 0x6a01000000000001 |
"SNMP Service starting (%version/%s) (%date/%s)" |
| 0x6a01000000000002 |
"SNMP Service exiting." |
| 0x6a01000000000003 |
"ZMQ setup failed for send request." |
| 0x6a01000000000004 |
"Path does not exist. (%path/%s)" |
| 0x6a01000000000005 |
"Directory created successfully. (%dir/%s)" |
| 0x6a01000000000006 |
"Failed to create directory: (%dir/%s)" |
| 0x6a01000000000007 |
"System's IPv4 address isn't configured." |
| 0x6a01000000000008 |
"System's IPv6 address isn't configured." |
| 0x6a01000000000009 |
"Socket creation failed." |
| 0x6a01000000000010 |
"IOCTL request failed." |
| 0x6a01000000000011 |
"Memory allocation failed." |
| 0x6a01000000000012 |
"User exist with old engine-id." |
| 0x6a01000000000013 |
"(%msg/%s)" |
| 0x6a01000000000014 |
"Community exist with old engine-id." |
| 0x6a01000000000016 |
"Invalid fan instance: (%fan_instance/%d)" |
| 0x6a01000000000017 |
"Failed to get fan request header size" |
| 0x6a01000000000018 |
"Failed to send ZMQ request for fantray: (%msg_length/%d)" |
| 0x6a01000000000019 |
"SERVICE_INDICATOR initializing snmp-service in FIPS 140-3 mode" |
| 0x6a01000000000020 |
"SNMP system description. (%sysDescr/%s)" |
| 0x6a01000000000021 |
"INOTIFY init Failed." |
| 0x6a01000000000022 |
"INOTIFY ADD WATCH Failed." |
| 0x6a01000000000023 |
"Failed to send SNMP trap for bad login." |
| 0x6a01000000000024 |
"INOTIFY read failed for the file: (%filename/%s)" |
| 0x6a01000000000025 |
"Failed to open file: (%filename/%s)" |
| 0x6a01000000000026 |
"Failed to create file: (%filename/%s)" |
| 0x6a01000000000027 |
"Failed to get filesystems on node (%node/%s)" |
| 0x6a01000000000028 |
"ZMQ setup failed." |
| 0x6a02000000000001 |
"Failed to create Mappi transaction. (%NAMESPACE/%s) (%OP/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000002 |
"Maapi get operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000003 |
"Maapi set elem operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000004 |
"SNMPv2-MIB update transaction failed. (%count/%d)" |
| 0x6a02000000000005 |
"CDB set operation failed. (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000006 |
"Failed to start the CDB session. (%PATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000007 |
"CDB get operation failed. (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000008 |
"Received invalid cdb operation. (%op/%d) in FPGA data map update" |
| 0x6a02000000000009 |
"Invalid xml tag to get element value. (%xmltag/%d)" |
| 0x6a02000000000010 |
"CDB get operation failed for SNMP user name (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000011 |
"CDB change directory operation failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000012 |
"CDB get operation failed for (%USER/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000013 |
"Failed to complete Mappi transaction. (%NAMESPACE/%s) (%OP/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000014 |
"Failed to do Maapi set values operation. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000015 |
"Maapi set values failed due to path error. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000016 |
"Received invalid cdb operation. (%op/%d)" |
| 0x6a02000000000017 |
"Maapi set elem2 operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000018 |
"CDB set elem operation failed. (%COMPONENT/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000019 |
"Failed to do Maapi set elem. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s) |
| 0x6a02000000000020 |
"CDB delete failed for (%PATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000021 |
"CDB set values failed for (%PATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000022 |
"CDB set case failed for SNMP target (%TARGET/%s) (%CASE/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x6a02000000000023 |
"Failed to delete Maapi. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000024 |
"Invalid xml tag in get (%xmltag/%d)" |
| 0x6a02000000000025 |
"Received invalid cdb operation (%op/%d) in Firmware data map update" |
| 0x6a02000000000026 |
"Invalid xml tag in Get (%xmltag/%d)" |
| 0x6a02000000000027 |
"Maapi create operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)" |
| 0x6a02000000000028 |
"Engine-id value: Invalid ConfD type (%TYPE/%d)" |
| 0x7001000000000001 |
"System host config service starting. (%Version/%s) (%Date/%s)" |
| 0x7001000000000002 |
"fopen failed: (%strerror/%s)" |
| 0x7001000000000003 |
"hal_init failed: (%strerror/%s)" |
| 0x7001000000000004 |
"Too Many: (%path/%s) (%howmany/%d) > (%max/%d)" |
| 0x7001000000000005 |
"Unable to fetch Pid, in function: (%func_name/%s) " |
| 0x7001000000000006 |
"Unable to fetch eeprom info from HAL (%name/%s)" |
| 0x7001000000000007 |
"Mac offset too large for this platform :(%OFFSET/%d) " |
| 0x7001000000000008 |
"inet_ntop: addr fail: (%strerror/%s)" |
| 0x7001000000000009 |
"inet_ntop: addr_gateway fail: (%strerror/%s)" |
| 0x7001000000000010 |
"popen failed: (%strerror/%s)" |
| 0x7001000000000013 |
"Counterdata is not fetched. Clearing reset_map snapshot. In function: (%func_name/%s)" |
| 0x7001000000000014 |
"daemon handler is Null in function: (%func_name/%s) " |
| 0x7001000000000015 |
"Error with writing counterdata to file in function: (%func_name/%s)" |
| 0x7001000000000016 |
"failed to fetch map data in function (%func_name/%s)" |
| 0x7001000000000017 |
"Operational state data for configured-network-range failed due to incorrect network prefix" |
| 0x7001000000000018 |
"Operational state data for active-network-range failed due to incorrect network prefix" |
| 0x7001000000000019 |
"Missing CHASSIS_NETWORK_SELECTION in environment" |
| 0x7001000000000020 |
"Missing CHASSIS_ID in environment" |
| 0x7001000000000021 |
"NETWORK_PREFIX env not found" |
| 0x7001000000000022 |
"Error: bad NETWORK_PREFIX env range" |
| 0x7001000000000023 |
"FAILED to send packts (%ERRNO/%d) (%ERRNOSTR/%s)" |
| 0x7001000000000024 |
"FAILED to open lcd socket (%SOCKET/%d) (%ERRNOSTR/%s)" |
| 0x7001000000000025 |
"FAILED to get interface index" |
| 0x7001000000000026 |
"FAILED to get interface address" |
| 0x7001000000000027 |
"Received empty base mac address from HAL" |
| 0x7001000000000028 |
"Received empty mac address pool size from HAL. Setting default value (%pool_size/%s)" |
| 0x7001000000000029 |
"SystemRebootHandled Failed to reboot appliance, in function: (%func_name/%s), Error code (%ERRNO/%d) " |
| 0x7001000000000030 |
"Missing NETWORK_RANGE_TYPE in environment" |
| 0x7001000000000031 |
"(%func_name/%s)" |
| 0x7001000000000032 |
"(%func/%s): (%message/%s)" |
| 0x7001000000000033 |
"(%func/%s): (%message/%s)" |
| 0x7001000000000034 |
"SW-MGMT socket error: (%message/%s)" |
| 0x7001000000000035 |
"(%func/%s): System timezone - (%message/%s)" |
| 0x7001000000000038 |
"(%func/%s): (%path/%s) does not exist" |
| 0x7001000000000039 |
"(%func/%s): (%dir/%s) created successfully" |
| 0x7001000000000040 |
"(%func/%s): failed to create: (%dir/%s)" |
| 0x7001000000000041 |
"(%func/%s): (%base_mac/%s) length is incorrect" |
| 0x7001000000000042 |
"HOSTNAME env var not found" |
| 0x7001000000000043 |
"failed to fetch dynamic PHY parameters" |
| 0x7001000000000044 |
"Received mac address pool size from HAL is not within the limit 0
|
| 0x7001000000000045 |
"The installed license enables FIX Low Latency; rebooting the system" |
| 0x7001000000000046 |
"The installed license disables FIX Low Latency; rebooting the system" |
| 0x7001000000000047 |
"Setting default host name: (%NAME/%s)" |
| 0x7001000000000053 |
"Firewall rule added:(%Name/%s), (%ip/%s), (%port/%d)" |
| 0x7001000000000054 |
"Firewall rule deleted:(%Name/%s), (%ip/%s), (%port/%d)" |
| 0x7001000000000055 |
"Default rule added:(%Name/%s), (%port/%d)" |
| 0x7001000000000056 |
"Default rule deleted:(%Chain_Name/%s), (%port/%d)" |
| 0x7001000000000060 |
"Invalid iptable port:(%RULE_NAME/%s), (%PORT/%d)" |
| 0x7001000000000061 |
"Empty ip. (%RULE_NAME/%s)" |
| 0x7001000000000062 |
"Failed to execute iptable cmd: (%CMD/%s), (%ERR/%s)" |
| 0x7001000000000063 |
"Failed getting chain rule count (%CMD/%s)" |
| 0x7001000000000070 |
"Unexpected exception while joining threads (%err/%s)" |
| 0x7001000000000071 |
"(%err/%s)" |
| 0x7001000000000072 |
"Unable to set operational data" |
| 0x7001000000000073 |
"Exception during initiatilation(%err/%s)" |
| 0x7001000000000074 |
"(%err/%s)" |
| 0x7001000000000075 |
"DHCP config ignored (%buffer/%s)" |
| 0x7001000000000076 |
"Received unsupported port speed: (%speed/%d)" |
| 0x7001000000000077 |
"Expected mgmt type to be ianaift_ethernetCsmacd, but received (%type/%d)" |
| 0x7001000000000078 |
"Received NULL handler" |
| 0x7001000000000079 |
"System-host-config: unable to initialize ZMQ" |
| 0x7001000000000080 |
"Unable to fetch sysinfo uptime: (%errno/%d)" |
| 0x7001000000000081 |
"Failed to open file: (%filename/%s)" |
| 0x7001000000000082 |
"Adding file to receive update failed" |
| 0x7001000000000083 |
"File monitor init failed" |
| 0x7001000000000084 |
"Failed to update prompt status" |
| 0x7001000000000085 |
"Firewall logging (%logenabled/%d)" |
| 0x7001000000000086 |
"Network range set as per selected RFC (%RFC/%s) (%CHASSIS_ID/%d) (%SUBNET/%s) (%PREFIX_INDEX/%d)" |
| 0x7001000000000087 |
"Too many entries, skipping (%msg/%s)" |
| 0x7001000000000089 |
"Interface enabled config changed. (%name/%s) (%enabled/%s)" |
| 0x7001000000000090 |
"Interface link state changed. (%name/%s) (%status/%s)" |
| 0x7002000000000001 |
"Failed to find CDB component (%COMPONENT/%s)" |
| 0x7002000000000002 |
"Unable to fetch data from confd (%path/%s) (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)" |
| 0x7002000000000003 |
"Unable to set in cdb (%path/%s) (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)" |
| 0x7002000000000004 |
"Unable to start confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x7002000000000005 |
"Successfully set base mac and mac pool size respectively in (%path1/%s) (%base_mac/%s) (%path2/%s) (%mac_pool_size/%s)" |
| 0x7002000000000006 |
"maapi_set failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x7002000000000007 |
"maapi_create failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x7002000000000008 |
"unknown tag (%TAG/%u) in operation (%OP/%d)" |
| 0x7002000000000009 |
"cdb_set_values failed for interface (%INTERFACE/%s) (%ERRNOSTR/%d) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x7002000000000010 |
"Failed to send completion reply for component (%COMPONENT/%s)" |
| 0x7002000000000011 |
"failed to create maapi transaction with config daemon (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x7002000000000012 |
"failed to complete maapi transaction (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x7002000000000013 |
"unknown tag id (%TAG/%u)" |
| 0x7002000000000014 |
"path does not exists (%path/%s)" |
| 0x7002000000000015 |
"Failed to create transaction (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)" |
| 0x7002000000000016 |
"CBD updated with hostname: (%NAME/%s)" |
| 0x7002000000000017 |
"(%func/%s): unsupported action (%tag/%d)" |
| 0x7002000000000018 |
"(%func/%s): Failed getting interface name (%path/%s)" |
| 0x7002000000000019 |
"maapi_delete failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s)" |
| 0x7002000000000020 |
"Timezone is invalid (%ZONE/%s)" |
| 0x7002000000000024 |
"cdb_get: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x7002000000000025 |
"(%entry/%s) exists" |
| 0x7002000000000026 |
"(%OP/%d) is not supported" |
| 0x7002000000000027 |
"cdb_cd failed for (%err/%s)" |
| 0x7003000000000001 |
"cmd failed (%host_cmd/%s) (%err/%s)" |
| 0x7003000000000002 |
"Failed to get con name for mgmt interface" |
| 0x7003000000000003 |
"Failed to set dns (%iptype/%s) server list" |
| 0x7101000000000001 |
"Control thread starting (%NODE/%s)" |
| 0x7101000000000002 |
"Control thread shutdown (%NODE/%s)" |
| 0x7101000000000003 |
"Internal error (%ERR/%s)" |
| 0x7101000000000004 |
"Internal error (%ERR/%s) (%VALUE/%d)" |
| 0x7101000000000006 |
"Error message: (%ERR/%s)" |
| 0x7101000000000007 |
"Maapi stop is failed. Error: (%ERR/%s)" |
| 0x7101000000000008 |
"Sending event:(%VALUE/%d) is failed:(%ERR/%s)" |
| 0x7101000000000012 |
"Invalid iptable port:(%RULE_NAME/%s), (%PORT/%d)" |
| 0x7101000000000013 |
"Empty ip. (%RULE_NAME/%s)" |
| 0x7101000000000014 |
"Failed to execute iptable cmd: (%CMD/%s), (%ERR/%s)" |
| 0x7101000000000015 |
"Failed getting chain rule count (%CMD/%s)" |
| 0x7101000000000016 |
"Internal error during restore cleanup (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)" |
| 0x7101000000000017 |
"Items cleaned up on config-restore (%FIELD/%s) (%NUM/%d)" |
| 0x7101000000000022 |
"Restricted SSH traffic from ip: (%IP_NETW/%s)" |
| 0x7101000000000023 |
"Add rule exist in DB with (%RULE_NAME/%s), (%IP_ADD/%s)" |
| 0x7101000000000024 |
"Empty ip. (%RULE_NAME/%s)" |
| 0x7101000000000025 |
"Failed to execute cmd: (%CMD/%s), (%ERR/%s)" |
| 0x7101000000000026 |
"SSH Rule Info: (%Name/%s), (%ip/%s), (%port/%d), (%is_ipv4/%d)" |
| 0x7101000000000027 |
"Add ssh access denial rule: (%RULE_NAME/%s)" |
| 0x7101000000000028 |
"Add ssh access allowed IP rule: (%RULE_NAME/%s), (%IP_ADD/%s)" |
| 0x7101000000000029 |
"Delete ssh access denial rule: (%RULE_NAME/%s)" |
| 0x7101000000000030 |
"Delete ssh access allowed IP rule: (%RULE_NAME/%s), (%IP_ADD/%s)" |
| 0x7101000000000041 |
"System Control starting. (%version/%s) (%date/%s)" |
| 0x7101000000000042 |
"Firewall rule added:(%Name/%s), (%ip/%s), (%port/%d)" |
| 0x7101000000000043 |
"Firewall rule deleted:(%Name/%s), (%ip/%s), (%port/%d)" |
| 0x7101000000000044 |
"Default rule added:(%Name/%s), (%port/%d)" |
| 0x7101000000000045 |
"Default rule deleted:(%Chain_Name/%s), (%port/%d)" |
| 0x7101000000000046 |
"Config-backup successful. (%BackupName/%s))" |
| 0x7101000000000047 |
"Config-backup failed.(%ERR/%s)" |
| 0x7101000000000048 |
"Operation successful.(%operation/%s)" |
| 0x7101000000000049 |
"Operation failed.(%operation/%s)(%ERR/%s)" |
| 0x7102000000000001 |
"HAFW connected to local database" |
| 0x7102000000000002 |
"HAFW connected to local database after retry (%RETRIES/%d)" |
| 0x7102000000000003 |
"HAFW discconnected from local database" |
| 0x7103000000000001 |
"Config backup & Restore command path (%PATH/%s)" |
| 0x7103000000000002 |
"Failed to open the backup file" |
| 0x7103000000000003 |
"Failed to write output to file" |
| 0x7103000000000004 |
"CONFD_IPC_ADDR: (%IPADDR/%s)" |
| 0x7103000000000005 |
"Notification error: (%ERR/%s)" |
| 0x7103000000000006 |
"Confd connect failed: (%ERR/%s)" |
| 0x7103000000000008 |
"ConfigBackupRestore::recursive_delete_all failed to delete (%TYPE/%s) (%PATH/%s) (%ERR/%s)" |
| 0x7103000000000009 |
"can't open directory (%PATH/%s) (%ERR/%s)" |
| 0x7103000000000010 |
"Invalid cdb iter operation (%op/%d)" |
| 0x7103000000000013 |
"(%FUNCTION/%s) No Memory for file data list" |
| 0x7103000000000014 |
"(%FUNCTION/%s) Command completion failed" |
| 0x7103000000000016 |
"Unable to fetch IP address from confd for profile (%prof/%s)" |
| 0x7601000000000001 |
"Initializing 'tmstat' library" |
| 0x7601000000000002 |
"Stats Collector - Starting" version=%v |
| 0x7601000000000003 |
"Stats Collector - Shutting Down" |
| 0x7601000000000004 |
"File System Partition Query Error" error=%v |
| 0x7601000000000005 |
"File System Usage Query Error" path=%v error=%v |
| 0x7601000000000006 |
"RAID Stats Query Error" error=%v |
| 0x7901000000000003 |
"Restricted SSH traffic from ip: (%IP_NETW/%s)" |
| 0x7901000000000004 |
"Add rule exist in DB with (%RULE_NAME/%s), (%IP_ADD/%s)" |
| 0x7901000000000007 |
"SSH Rule Info: (%Name/%s), (%ip/%s), (%port/%d), (%is_ipv4/%d)" |
| 0x7901000000000008 |
"Add ssh access denial rule: (%RULE_NAME/%s)" |
| 0x7901000000000009 |
"Add ssh access allowed IP rule: (%RULE_NAME/%s), (%IP_ADD/%s)" |
| 0x7901000000000010 |
"Delete ssh access denial rule: (%RULE_NAME/%s)" |
| 0x7901000000000011 |
"Delete ssh access allowed IP rule: (%RULE_NAME/%s), (%IP_ADD/%s)" |
| 0x7901000000000022 |
"Firewall Manager starting. (%version/%s) (%date/%s)" |
| 0x7901000000000023 |
"Firewall rule added:(%Name/%s), (%ip/%s), (%port/%d)" |
| 0x7901000000000024 |
"Firewall rule deleted:(%Name/%s), (%ip/%s), (%port/%d)" |
| 0x7901000000000025 |
"Default rule added:(%Name/%s), (%port/%d)" |
| 0x7901000000000026 |
"Default rule deleted:(%Chain_Name/%s), (%port/%d)" |
| 0x7901000000000037 |
"(%msg/%s)" |
| 0x7b01000000000001 |
"Failed to read input crl file. (%filename/%s)" |
| 0x7b01000000000002 |
"Failed to write crl file: (%path/%s)" |
| 0x7b01000000000003 |
"File cannot be opened (%file/%s)" |
| 0x7b01000000000004 |
"OpenSSL public key failed." |
| 0x7b01000000000005 |
"Key/Certificate mismatch (%file1/%s) (%file2/%s)" |
| 0x7b01000000000006 |
"Failed to open key file (%name/%s)" |
| 0x7b01000000000007 |
"Failed to read key file (%name/%s)" |
| 0x7b01000000000008 |
"OpenSSL ASN1_INTEGER_new failed to allocate memory." |
| 0x7b01000000000009 |
"OpenSSL ASN1_STRING_set_default_mask_asc failed." |
| 0x7b01000000000010 |
"OpenSSL BIO_new_fp failed allocate memory." |
| 0x7b01000000000011 |
"OpenSSL BIO_new failed allocate memory." |
| 0x7b01000000000012 |
"OpenSSL BIO_write_filename failed write (%name/%s)." |
| 0x7b01000000000013 |
"OpenSSL BIO_write failed to write CSR." |
| 0x7b01000000000014 |
"OpenSSL BN_GENCB_set failed to generate callback." |
| 0x7b01000000000015 |
"OpenSSL BN_new failed allocate memory." |
| 0x7b01000000000016 |
"OpenSSL BN_pseudo_rand failed." |
| 0x7b01000000000017 |
"OpenSSL BN_set_word failed." |
| 0x7b01000000000018 |
"OpenSSL BN_to_ASN1_INTEGER failed." |
| 0x7b01000000000019 |
"OpenSSL certificate key is nil." |
| 0x7b01000000000020 |
"OpenSSL CONF_modules_load failed." |
| 0x7b01000000000021 |
"Certificate Request city (%city/%s)." |
| 0x7b01000000000022 |
"Certificate Request country (%country/%s)." |
| 0x7b01000000000023 |
"Certificate Request email (%email/%s)." |
| 0x7b01000000000024 |
"Certificate Request name (%name/%s)." |
| 0x7b01000000000025 |
"Certificate Request organization (%organization/%s)." |
| 0x7b01000000000026 |
"Certificate Request organizational unit (%unit/%s)." |
| 0x7b01000000000027 |
"Certificate Request region (%state/%s)." |
| 0x7b01000000000028 |
"Certificate Request version (%version/%d)." |
| 0x7b01000000000029 |
"OpenSSL do_sign_init failed." |
| 0x7b01000000000030 |
"OpenSSL EC_GROUP_new_by_curve_name failed." |
| 0x7b01000000000031 |
"OpenSSL EC_KEY_generate_key failed." |
| 0x7b01000000000032 |
"OpenSSL EC_KEY_new failed to allocate memory." |
| 0x7b01000000000033 |
"OpenSSL EC_KEY_set_group failed." |
| 0x7b01000000000034 |
"OpenSSL_malloc failed to allocate bytes (%size/%u)" |
| 0x7b01000000000035 |
"OpenSSL X509_name parse error." |
| 0x7b01000000000036 |
"OpenSSL NCONF_get_section failed." |
| 0x7b01000000000037 |
"OpenSSL NCONF_get_string failed to find file (%file/%s)" |
| 0x7b01000000000038 |
"OpenSSL NCONF_load failed for file (%file/%s)" |
| 0x7b01000000000039 |
"OpenSSL NCONF_new failed to allocate memory." |
| 0x7b01000000000040 |
"OpenSSL OBJ_create failed for (%name/%s)." |
| 0x7b01000000000041 |
"OpenSSL OBJ_sn2nid failed." |
| 0x7b01000000000042 |
"OpenSSL PEM_read_bio_X509_REQ failed read csr." |
| 0x7b01000000000043 |
"Failed to read crl. Invalid PEM format crl input" |
| 0x7b01000000000044 |
"OpenSSL PEM_read_bio_PrivateKey failed read key (%file/%s)" |
| 0x7b01000000000045 |
"OpenSSL PEM_write_bio_ECPrivateKey failed to write key." |
| 0x7b01000000000046 |
"OpenSSL PEM_write_bio_RSAPrivateKey failed to write key." |
| 0x7b01000000000047 |
"OpenSSL PEM_write_bio_X509_REQ failed write certificate request." |
| 0x7b01000000000048 |
"OpenSSL RSA_generate_key_ex failed." |
| 0x7b01000000000049 |
"OpenSSL RSA_new_method failed." |
| 0x7b01000000000050 |
"OpenSSL Subject not starting with backslash." |
| 0x7b01000000000051 |
"OpenSSL X509_get_pubkey failed to get public key." |
| 0x7b01000000000052 |
"OpenSSL X509_gmtime_adj failed." |
| 0x7b01000000000053 |
"OpenSSL X509_NAME_add_entry_by_NID failed for (%name/%s)." |
| 0x7b01000000000054 |
"OpenSSL X509_Name_new failed to allocate memory." |
| 0x7b01000000000055 |
"OpenSSL X509_new failed to allocate memory." |
| 0x7b01000000000056 |
"OpenSSL X509_REQ_get_pubkey failed to get public key." |
| 0x7b01000000000057 |
"OpenSSL X509 create CSR failed." |
| 0x7b01000000000058 |
"OpenSSL X509_REQ_new failed to allocate memory." |
| 0x7b01000000000059 |
"OpenSSL X509_REQ_set_pubkey failed." |
| 0x7b01000000000060 |
"OpenSSL X509_REQ_set_subject_name failed." |
| 0x7b01000000000061 |
"OpenSSL X509_REQ_set_version failed." |
| 0x7b01000000000062 |
"OpenSSL X509_REQ_verify failed to verify signature." |
| 0x7b01000000000063 |
"OpenSSL X509_set_issuer_name failed." |
| 0x7b01000000000064 |
"OpenSSL X509_set_pubkey failed to set public key." |
| 0x7b01000000000065 |
"OpenSSL X509_set_serialNumber failed." |
| 0x7b01000000000066 |
"OpenSSL X509_sign failed." |
| 0x7b01000000000067 |
"OpenSSL X509_STORE_new failed allocate memory." |
| 0x7b01000000000068 |
"OpenSSL X509_time_adj_ex failed." |
| 0x7b01000000000069 |
"OpenSSL X509V3_EXT_add_nconf failed to load extension (%name/%s). Bad san." |
| 0x7b01000000000070 |
"OpenSSL X509V3_EXT_REQ_add_nconf failed to load extension (%name/%s)." |
| 0x7b01000000000071 |
"OpenSSL X509_STORE_set_default_paths failed." |
| 0x7b01000000000072 |
"(%message/%s)" |
| 0x7b01000000000073 |
"Saved Certificate Authority (CA) Bundle file: (%name/%s)" |
| 0x7b01000000000074 |
"Unable to save Certificate Authority (CA) Bundle file: (%name/%s) (%errnum/%d)" |
| 0x7b01000000000075 |
"OpenSSL Keys and Certificates must start with -----BEGIN ..." |
| 0x7b01000000000079 |
"Unable to save HTTPD configuration file. (%name/%s) (%errnum/%d)" |
| 0x7b01000000000081 |
"Saved HTTPD configuration file. (%name/%s)" |
| 0x7b01000000000082 |
"CA-BUNDLE input data is formatted with the wrong number of dashes." |
| 0x7b01000000000084 |
"fmemopen failed. (%name/%s) (%errnum/%d)" |
| 0x7b01000000000085 |
"The (%item/%s) being set in confd failed." |
| 0x7b01000000000086 |
"Certificate Request Subject Alternative Name (%san/%s)." |
| 0x7b01000000000087 |
"Certificate Request Days Valid (%dval/%s)." |
| 0x7b01000000000088 |
"Certificate Request Key type (%type/%s)." |
| 0x7b01000000000089 |
"Certificate Request has empty country field." |
| 0x7b01000000000090 |
"Certificate Request has empty state field." |
| 0x7b01000000000091 |
"Certificate Request has empty city field." |
| 0x7b01000000000092 |
"Certificate Request has empty organization field." |
| 0x7b01000000000093 |
"Certificate Request has empty unit field." |
| 0x7b01000000000094 |
"Certificate Request has empty email field." |
| 0x7b01000000000095 |
"OpenSSL EVP_PKEY_assign_RSA failed to create PKEY wrapper for RSA key." |
| 0x7b01000000000096 |
"OpenSSL error detail (%detail/%s)" |
| 0x7b01000000000097 |
"Key re-encryption failed: no key loaded" |
| 0x7b01000000000098 |
"Key re-encryption failed: unable to create BIO from key buffer" |
| 0x7b01000000000099 |
"Key re-encryption failed: unable to decrypt key with old passphrase" |
| 0x7b01000000000100 |
"Key re-encryption failed: unable to create output BIO" |
| 0x7b01000000000101 |
"Key re-encryption failed: unable to encrypt key with new passphrase" |
| 0x7b01000000000102 |
"Key re-encryption failed: unable to reopen key buffer" |
| 0x7b01000000000103 |
"Key re-encryption failed: invalid key size (%size/%d)" |
| 0x8201000000000001 |
"OTEL Agent service starting" version=%v build_date=%v |
| 0x8201000000000002 |
"OTEL Agent service Shutting down" |
| 0x8201000000000003 |
"OTEL Agent detected configuration change" |
| 0x8201000000000004 |
"OTEL Agent received restart signal" |
| 0x8201000000000005 |
"OTEL Agent generated an error" activity=%v error=%v |
| 0x8201000000000006 |
"OTEL Agent detected otel-collector exited, restarting" |
| 0x8202000000000001 |
"Starting OTEL Collector service" |
| 0x8202000000000002 |
"Stopping OTEL Collector service" |
| 0x8202000000000003 |
"OTEL Collector message" message=%v kw=# |
| 0x8202000000000004 |
"OTEL Collector generated a warning" warning=%v kw=# |
| 0x8202000000000005 |
"OTEL Collector generated an error" error=%v kw=# |
| 0x8501000000000001 |
"Verifying Monitoring Agent is up and running" address=%v |
| 0x8501000000000002 |
"Verifying Platform HAL is up and running" address=%v |
| 0x8501000000000003 |
"Verifying Platform FWU is up and running" address=%v |
| 0x8501000000000004 |
"Loading Task" task=%v name=%v profile=%v |
| 0x8501000000000005 |
"Cancelling Task" task=%v name=%v profile=%v |
| 0x8501000000000006 |
"Running Task" task=%v name=%v profile=%v mode=%v |
| 0x8501000000000007 |
"Completed Task" task=%v name=%v profile=%v mode=%v |
| 0x8501000000000008 |
"Skipping Tasks" task=%v |
| 0x8501000000000009 |
"Information event generated at diag-agent" event=%v severity=%s area=%s task=%s profile=%s |
| 0x850100000000000a |
"Component Attribute Changed" node=%s category=%s component=%v attribute=%v severity=%v health=%s value=%v message=%s |
| 0x850100000000000b |
"Component Health Changed" component=%v severity=%v |
| 0x850100000000000c |
"Component Attribute Changed" node=%s category=%s component=%v attribute=%v severity=%v health=%s value=%v message=%s |
| 0x850100000000000d |
"unable to initialize firmware monitor" error=%v |
| 0x850100000000000e |
"unable to get drive slot from platform HAL" error=%v |
| 0x850100000000000f |
"unable to initialize LOP binary alert handler" error=%v |
| 0x8501000000000010 |
"unable to update LOP binary alert handler attribute" object_id=%v sub_object=%v slot_id=%v component=%v attribute=%v error=%v |
| 0x8501000000000011 |
"unable to initialize LOP analog alert handler" error=%v |
| 0x8501000000000012 |
"unable to refresh LOP analog alert handler" error=%v |
| 0x8501000000000013 |
"unable to update LOP analog alert handler attribute" component=%v attribute=%v error=%v |
| 0x8501000000000014 |
"unable to abort profile" name=%v error=%v |
| 0x8501000000000015 |
"unable to unload profile" name=%v error=%v |
| 0x8501000000000016 |
"Error event generated at diag-agent" event=%v severity=%s area=%s task=%s profile=%s |
| 0x8501000000000017 |
"Warning event generated at diag-agent" event=%v severity=%s area=%s task=%s profile=%s |
| 0x8501000000000018 |
"Component Attribute Changed" node=%s category=%s component=%v attribute=%v severity=%v health=%s value=%v message=%s |
| 0x8501000000000019 |
"Component Attribute Changed" node=%s category=%s component=%v attribute=%v severity=%v health=%s value=%v message=%s |
| 0x850100000000001a |
"Component Health Changed" component=%v severity=%v |
| 0x850100000000001b |
"Component Health Changed" component=%v severity=%v |
| 0x850100000000001c |
"Service monitor error" service=%v error=%v |
| 0x850100000000001d |
"Error encountered during DB cleanup at startup" error=%s |
| 0x850100000000001e |
"LOP Binary Alert Handler - RX Unknown Alert" object_id=%v sub_object=%v slot_id=%v bit=%v name=%s |
| 0x850100000000001f |
"LOP Binary Alert Handler - RX Invalid States" object_id=%v sub_object=%v slot_id=%v bit=%v states=%d |
| 0x8501000000000020 |
"LOP Analog Alert Handler - RX Unknown Alert" object_id=%v sub_object=%v slot_id=%v state=%v alert=%s |
| 0x8501000000000021 |
"LOP Analog Alert Handler - RX Invalid States" object_id=%v sub_object=%v slot_id=%v states=%d |
| 0x8501000000000022 |
"HAL Remote Call Error" action=%s error_index=%d error=%s |
| 0x8501000000000023 |
"Diagnostic Controller Panic" error=%s |
| 0x8501000000000024 |
"Diagnostic Controller Visitor Error" kind=%s error=%s |
| 0x8501000000000025 |
"LOG RX ERR" error=%s |
| 0x8501000000000026 |
"Monitoring Agent Error" error=%s |
| 0x8501000000000027 |
"PUSH Error" error=%s |
| 0x8501000000000028 |
"Event being processed during panic" event=%s |
| 0x8501000000000029 |
"Event Visitor Panic" error=%s |
| 0x850100000000002a |
"Event being processed during panic" event=%s |
| 0x850100000000002b |
"Event Visitor Error" kind=%s error=%s |
| 0x850100000000002c |
"Platform HAL Query Timeout" topic=%s |
| 0x850100000000002d |
"Platform HAL Query Retry" topic=%s |
| 0x850100000000002e |
"Invoking command in container" command=%v container=%v |
| 0x850100000000002f |
"Command execution result" exit_code=%v |
| 0x8501000000000030 |
"PROM Task - Invalid agent endpoint" endpoint=%v name=%v |
| 0x8501000000000031 |
"Unable to set attribute for action error" error=%v attribute_key=%v value=%v |
| 0x8501000000000032 |
"Unable to set attribute for action complete" error=%v attribute_key=%v value=%v |
| 0x8501000000000033 |
"Unable to retrieve value from action result" error=%v key=%v |
| 0x8501000000000034 |
"Unable to define attribute for action result" error=%v attribute_key=%v value=%v |
| 0x8501000000000035 |
"Unable to set attribute for action result" error=%v attribute_key=%v value=%v |
| 0x8501000000000036 |
"OTEL Instrument Task - error during broadcasting initial state" node=%v error=%v |
| 0x8501000000000037 |
"OTEL Instrument Task - Reconfig error during stopping all instruments" node=%v error=%v |
| 0x8501000000000038 |
"unable to query blade platform type" slot=%v error=%v |
| 0x8501000000000039 |
"OTEL Instrument Task - Start Instrument Error" node=%v instrument=%v error=%v |
| 0x850100000000003a |
"OTEL Instrument Task TDR - Invalid agent endpoint" endpoint=%v name=%v |
| 0x850100000000003b |
"OTEL Service Task - error during broadcasting initial state" node=%v error=%v |
| 0x850100000000003c |
"No existing data for attribute" attribute=%v |
| 0x850100000000003d |
"Unable to evaluate attribute" attribute=%v error=%v |
| 0x850100000000003e |
"Failed to fetch memory stress report" error=%v |
| 0x850100000000003f |
"error" error=%v |
| 0x8501000000000040 |
"Failed to fetch memory stats" error=%v |
| 0x8501000000000041 |
"Unable to fetch system drives status" error=%v |
| 0x8501000000000042 |
"Unable to fetch drive information" device=%v error=%v |
| 0x8501000000000043 |
"Failed to find drive device" device=%v |
| 0x8501000000000044 |
"OTEL Instrument task received a watchdog event" node=%v |
| 0x8501000000000045 |
"OTEL Instrument task is setting node ready status on receiving watchdog event" node=%v status=%v |
| 0x8501000000000046 |
"OTEL Instrument task stopping instruments on receiving watchdog event" node=%v |
| 0x8501000000000047 |
"Failed to validate dimm size and count for platform" platform=%v error=%v |
| 0x8501000000000048 |
"Failed to fetch memory dimms information" error=%v |
| 0x8501000000000049 |
"Failed to fetch dimm size for platform" platform=%v error=%v |
| 0x850100000000004a |
"Failed to fetch NVMe SMART attributes" error=%v |
| 0x850100000000004b |
"Unable to fetch filesystem stats" error=%v |
| 0x850100000000004c |
"CPLD health check error" error=%v |
| 0x850100000000004d |
"CPLD register not found" register=%v |
| 0x850100000000004e |
"CPLD field access error" field=%v error=%v |
| 0x850100000000004f |
"CPLD field not found in registers" field=%v |
| 0x8501000000000050 |
"TDR task failed to enable TDR" node=%v error=%v |
| 0x8501000000000051 |
"OTEL task received a watchdog event" node=%v |
| 0x8501000000000052 |
"TDR task attempting to enable TDR on receiving agent alive event" node=%v event=%v |
| 0x8501000000000053 |
"TDR task failed to enable TDR on receiving agent alive event" node=%v error=%v |
| 0x8501000000000054 |
"Telemetry broadcast state error" error=%v |
| 0x8501000000000055 |
"Failed to add telemetry input for tenant" tenant=%v error=%v |
| 0x8501000000000056 |
"Failed to delete telemetry input for tenant" tenant=%v error=%v |
| 0x8501000000000057 |
"Failed to post telemetry data" kind=%v error=%v |
| 0x8501000000000058 |
"Unable to notify blade about tenant event" kind=%v blade=%v tenant=%v error=%v |
| 0x8501000000000059 |
"Telemetry reconfigure error" node=%v error=%v |
| 0x850100000000005a |
"Telemetry stats task received a watchdog event" node=%v |
| 0x850100000000005b |
"Telemetry stats task recofiguring inputs on receiving watchdog event" node=%v |
| 0x850100000000005c |
"OTEL Instrument Task - Unable to verify initial platform-monitor state" node=%v |
| 0x850100000000005d |
"TDR Task - Unable to verify initial platform-monitor state" node=%v |
| 0x850100000000005e |
"Telemetry Stats Task - Unable to verify initial platform-monitor state" node=%v |
| 0x850100000000005f |
"Error performing drive performance test" error=%v |
| 0x8501000000000060 |
"Error deleting drive performance test files" error=%v |
| 0x8502000000000001 |
"Action Point reply error" action_point=%s error=%s |
| 0x8502000000000002 |
"Health Profile Error - Unable to unpack input" error=%s |
| 0x8502000000000003 |
"Health Profile Error - Unable to find profile" action_point=%s error=%s |
| 0x8502000000000004 |
"Health Profile Error - Unable to extract help" action_point=%s error=%s |
| 0x8502000000000005 |
"Health Profile Error - Parameter validation problem" action_point=%s error=%s |
| 0x8502000000000006 |
"Health Profile Error - Unable to start profile" action_point=%s error=%s |
| 0x8502000000000007 |
"Health Profile Error - Unable to stop profile" action_point=%s error=%s |
| 0x8502000000000008 |
"Health Profile Action Error" action_point=%s error=%s |
| 0x8502000000000009 |
"RRD Action Point: Abort" |
| 0x850200000000000a |
"ClusterNode::Subscriber - Start Session Error" error=%s |
| 0x850200000000000b |
"ClusterNode::Subscriber - Get Value List Error" index=%d error=%s |
| 0x850200000000000c |
"DiskEncryption::Subscriber - On broadcast - Read Error" error=%s |
| 0x850200000000000d |
"DiskEncryption::Subscriber - On Connected - Read Error" ctx=%s error=%s |
| 0x850200000000000e |
"DiskEncryptionSubscriber::Subscriber - Read KMIP endpoint Error" index=%d error=%s |
| 0x850200000000000f |
"DiskEncryption::Subscriber - Read next-scheduled-rotation error" error=%s |
| 0x8502000000000010 |
"DiskEncryption::Subscriber - Write Disk Encryption Operational State Error" error=%s |
| 0x8502000000000011 |
"DiskEncryption::Subscriber failed to update State data" key_path=%s error=%s |
| 0x8502000000000012 |
"DiskEncryption::Subscriber failed to fetch State data" key_path=%s |
| 0x8502000000000013 |
"DiskEncryption::Subscriber failed to decrypt value" key_path=%s |
| 0x8502000000000014 |
"DiskEncryption::Subscriber - Start Session Error" error=%s |
| 0x8502000000000015 |
"DiskEncryption::Subscriber - update state error" key_path=%s error=%s |
| 0x8502000000000016 |
"DiskEncryption::Subscriber - query state error" key_path=%s error=%s |
| 0x8502000000000017 |
"DiskEncryption::Subscriber - delete state error" key_path=%s error=%s |
| 0x8502000000000018 |
"Disk Encryption key rotation interval is 0, skipping next schedule date calculation" |
| 0x8502000000000019 |
"failed to fetch existing disk encryption key rotation date, falling back to current day" error=%s |
| 0x850200000000001a |
"stored disk encryption key rotation date is corrupt and cannot be parsed, skipping schedule" date=%s error=%s |
| 0x850200000000001b |
"found existing disk encryption key rotation date , using it as baseline" date=%s |
| 0x850200000000001c |
"no existing disk encryption key rotation date found, using current day as baseline" date=%s |
| 0x850200000000001d |
"HostName::Subscriber - Start Session Error" error=%s |
| 0x850200000000001e |
"PlatformLcdMode::Subscriber - Set Value" error=%s |
| 0x850200000000001f |
"PlatformLcdMode::Subscriber - Start Session Error" error=%s |
| 0x8502000000000020 |
"PlatformLcdMode::Subscriber - Get Value Error" error=%s |
| 0x8502000000000021 |
"PlatformLcdMode::Subscriber - error updating LCD mode in CDB" error=%s |
| 0x8502000000000022 |
"PlatformLcdMode::Subscriber - LCD is down and not ready for more than a minute, hence LCD mode update unsuccessful and state data not updated" |
| 0x8502000000000023 |
"PlatformLcdMode::Subscriber - get LCD status error" error=%s |
| 0x8502000000000024 |
"PlatformLcdMode::Subscriber - update LCD mode error" error=%s |
| 0x8502000000000025 |
"SystemId::Subscriber - Start Session Error" error=%s |
| 0x8502000000000026 |
"SystemMgmt::Subscriber - Read DNS Error" index=%d error=%s |
| 0x8502000000000027 |
"TelemetryExporter::Subscriber - Read Telemetry Exporter Error" index=%d error=%s |
| 0x8502000000000028 |
"TelemetryExporter::Subscriber - Write Telemetry Exporter Operational State Error" index=%d error=%s |
| 0x8502000000000029 |
"TelemetryExporter::Subscriber - Read Attribute Error" index=%d error=%s |
| 0x850200000000002a |
"TelemetryExporter::Subscriber failed to update State data" key_path=%s error=%s |
| 0x850200000000002b |
"TelemetryExporter::Subscriber failed to fetch State data" key_path=%s |
| 0x850200000000002c |
"TelemetryExporter::Subscriber - Start Session Error" error=%s |
| 0x850200000000002d |
"TelemetryExporter::Subscriber failed to create file" file_path=%s error=%s |
| 0x850200000000002e |
"TelemetryExporter::Subscriber failed to write to file" file_path=%s error=%s |
| 0x850200000000002f |
"Tenant::Subscriber - Read Tenant Error" index=%d error=%s |
| 0x8502000000000030 |
"Tenant::Subscriber - Start Session Error" tenant=%s error=%s |
| 0x8502000000000031 |
"Services::Subscriber - KeyPath[1,0] not ok" |
| 0x8502000000000032 |
"Services::Subscriber - Read Service Error" index=%d error=%s |
| 0x8502000000000033 |
"Error reading bios FDE capabilities" error=%s |
| 0x8502000000000034 |
"Error reading bios mgmt config capabilities" error=%s |
| 0x8502000000000035 |
"Tenant::Subscriber - Unknown Tenant" name=%s |
| 0x8601000000000001 |
"Confd Client - Load Schema Error" error=%s |
| 0x8601000000000002 |
"Confd Client - Read HA Status Error" error=%s |
| 0x8601000000000003 |
"ConfD HA status read restored successfully" retry_count=%v duration=%v |
| 0x8601000000000004 |
"Confd Client - ON NOTIFY - Not Connected" |
| 0x8602000000000001 |
"MAAPI is not connected to confd" |
| 0x8602000000000002 |
"Unable to do prompt, no transaction started" |
| 0x8602000000000003 |
"MAAPI Request Action - Error" reason=%s command=%s action=%s error=%s |
| 0x8604000000000001 |
"Action Worker on worker event - reconnection detected" handler=%s |
| 0x8604000000000002 |
"Action Worker worker disconnected" handler=%s action_point=%s sock=%d error=%s |
| 0x8604000000000003 |
"Confd Action Handler - Connect Error" handler=%s error=%s |
| 0x8604000000000004 |
"Confd Action Handler - Register Error" handler=%s error=%s |
| 0x8604000000000005 |
"Confd Action Handler - Disconnect Error" handler=%s error=%s |
| 0x8604000000000006 |
"Confd Action Handler - Confd Reconnection detected" handler=%s |
| 0x8604000000000007 |
"Confd Handler - Connect Error" handler=%s error=%s |
| 0x8604000000000008 |
"Confd Handler - Register Error" handler=%s error=%s |
| 0x8604000000000009 |
"Confd Handler - Disconnect Error" handler=%s error=%s |
| 0x860400000000000a |
"Confd Handler On control event - reconnection detected" handler=%s |
| 0x860400000000000b |
"Confd Handler On worker event - reconnection detected" handler=%s |
| 0x8901000000000001 |
"Starting telemetry pipeline" name=%s |
| 0x8901000000000002 |
"Shutting down telemetry pipelines" |
| 0x8901000000000003 |
"Processor generated an error" processor=%s error=%v |
| 0x8901000000000004 |
"Input Controller - input schedule error" input=%s error=%v |
| 0x8901000000000005 |
"Output generated an error" output=%s error=%v |
| 0x8901000000000006 |
"Timeout waiting for input execution to stop" input=%s timeout=%v |
| 0x8901000000000007 |
"Input execution exceeded last interval" input=%s duration=%v |
| 0x8901000000000008 |
"Processor stage changed" processor=%s processor_id=%s old_state=%v new_state=%v |
| 0x8903000000000001 |
"Docker stats container query error" error=%v |
| 0x8903000000000002 |
"Docker stats error" container=%s error=%v |
| 0x8903000000000003 |
"file watcher add error" path=%s error=%v |
| 0x8903000000000004 |
"file watcher create error" path=%s error=%v |
| 0x8903000000000005 |
"file watcher event error" service=%s event=%s error=%v |
| 0x8903000000000006 |
"file watcher error" service=%s error=%v |
| 0x8903000000000007 |
"Tailing file" file=%s |
| 0x8903000000000008 |
"Tailing platform log" file=%s |
| 0x8903000000000009 |
"Async action stop timeout" name=%s job_id=%v input_id=%v |
| 0x8904000000000001 |
"RRD processing error" kind=%s error=%v |
| 0x8904000000000002 |
"Elastic search batch push error" error=%v |
| 0x8904000000000003 |
"OTEL: Starting Metric Provider" endpoint=%s |
| 0x8904000000000004 |
"PANIC occurred in OTEL Worker" error=%v |
| 0x8904000000000005 |
"OTEL Output Process Error" kind=%s error=%v |
| 0x8904000000000006 |
"OTEL: gRPC client connecting" output=%s endpoint=%s |
| 0x8904000000000007 |
"OTEL: gRPC Client Open Error" error=%v |
| 0x8904000000000008 |
"OTEL Metric Export Error" error=%v |
| 0x8904000000000009 |
"OTEL Resource Processing Error" error=%v kind=%s |
| 0x890400000000000a |
"OTEL: Metric Process Error" kind=%s field=%s error=%v |
| 0x890400000000000b |
"Monitor error event" kind=%v error=%v |