Log Message Reference for F5OS-C-1.6.0

ID Number Description
0x0010000000000001 "cdb_get failed to get node data((%RET/%d) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d))"
0x0010000000000003 "Found invalid Peer IP (%PEERIP/%s)"
0x0010000000000004 "Peer Subnet not found: PARTITION_SUBNET"
0x0010000000000005 "Found invalid Peer Subnet (%PEERNET/%s)"
0x0010000000000007 "Error creating temp peer file: (%FILENAME/%s) (%ERRNUM/%d)"
0x0010000000000008 "Error writing temp peer file: (%FILENAME/%s)"
0x0010000000000009 "Error copying temp peer file: (%FILENAME/%s)"
0x0010000000000010 "Partition Blades Daemon starting. (%version/%s) (%log/%s) (%date/%s)"
0x1001000000000001 "BCM56XXD driver error: All L2 stash entries exhausted: vlan_id=(%vlan_id/%d)"
0x1001000000000002 "BCM56XXD driver error: Cannot find VLAN: vlan_id=/, unit=(%vlan_id/%d) (%cvid/%d) (%dev_unit/%d)"
0x1001000000000003 "BCM56XXD SDK error: Error adding l2 entry for vlan_id=, unit=(%vlan_id/%d) (%dev_unit/%d)"
0x1001000000000004 "BCM56XXD SDK error: Error initializing L2 stash free list"
0x1001000000000005 "BCM56XXD driver error: Invalid timer_val = (%timer_val/%d)"
0x1001000000000006 "BCM56XXD SDK error: Error setting L2 age timer"
0x1001000000000007 "BCM56XXD SDK error: Error adding l2 entry for vlan_id=, port_id=(%vlan_id/%d) (%sc_physport/%d)"
0x1001000000000008 "BCM56XXD driver error: Error adding l2 entry in stash: vlan_id=, port_id=(%vlan_id/%d) (%sc_physport/%d)"
0x1001000000000009 "BCM56XXD SDK error: Error adding l2 entry: unit=, trunk_id=(%i_unit/%d) (%sc_ifname/%d)"
0x1001000000000010 "BCM56XXD driver error: Error adding l2 entry in stash: vlan_id=, interface =(%vlan_id/%d) (%sc_ifname/%d)"
0x1001000000000011 "BCM56XXD driver error: Error adding l2 entry in stash: vlan_id=, trunk_id=(%vlan_id/%d) (%trunk_trunk_id/%d)"
0x1001000000000012 "BCM56XXD SDK error: Error: reading L2 entry : (%idx/%d) (%bcm_errmsg_status/%s)"
0x1001000000000013 "BCM56XXD SDK error: failed constructing l2_forward result for unit : entry (%dev_unit/%d) (%idx/%d)"
0x1001000000000014 "BCM56XXD SDK error: Error deleting l2 entry from hardware: vlan_id=(%vlan_id/%d)"
0x1001000000000015 "BCM56XXD driver error: Error deleting l2 entry from stash: vlan_id=(%vlan_id/%d)"
0x1001000000000016 "BCM56XXD SDK error: Error flushing l2 table for port_id=(%port/%d)"
0x1001000000000017 "BCM56XXD driver error: Error restoring static l2 entries for port_id= on unit .(%port/%d) (%i_unit/%d)"
0x1001000000000018 "BCM56XXD SDK error: Error flushing l2 table for unit=, vid=, tid=(%unit/%d) (%vid/%d) (%tid/%d)"
0x1001000000000019 "BCM56XXD SDK error: Error flushing l2 table for unit=, trunk_id=(%i_unit/%d) (%trunk_trunk_id/%d)"
0x1001000000000020 "BCM56XXD driver error: Error restoring static l2 entries: unit=, trunk_id=(%i_unit/%d) (%trunk_trunk_id/%d)"
0x1001000000000021 "BCM56XXD SDK error: Error retrieving vlan bitmaps unit=, vid=(%unit/%d) (%ventry_vid/%d)"
0x1001000000000022 "BCM56XXD driver error: Vlan soft struct does not exist(%vid/%d)"
0x1001000000000023 "BCM56XXD SDK error: Error retrieving rate filter, (%bcm_errmsg_rv/%s)"
0x1001000000000024 "BCM56XXD SDK error: Error setting rate filter, (%bcm_errmsg_rv/%s)"
0x1001000000000025 "BCM56XXD SDK error: Error setting port learning mode, (%bcm_errmsg_rv/%s)"
0x1001000000000026 "BCM56XXD SDK error: Error clearing L2 entries for the port, (%bcm_errmsg_rv/%s)"
0x1001000000000027 "BCM56XXD driver error: Error getting IO expander for :MODPRS(%sw_cfg_u_pcfg_p_ifname/%s)"
0x1001000000000028 "BCM56XXD driver error: Error getting IO expander for :INT(%sw_cfg_u_pcfg_p_ifname/%s)"
0x1001000000000029 "BCM56XXD driver error: Error getting IO expander for :LP(%sw_cfg_u_pcfg_p_ifname/%s)"
0x1001000000000030 "BCM56XXD driver error: Error getting IO expander initialization data array"
0x1001000000000031 "BCM56XXD driver error: Error getting IO expander initialization data count"
0x1001000000000032 "BCM56XXD info: STUBBED "
0x1001000000000033 "BCM56XXD driver error: Error configuring and starting LED uprocessors"
0x1001000000000034 "BCM56XXD driver error: Error applying default port tuning to unit port (%unit/%d) (%port/%d)"
0x1001000000000035 "BCM56XXD info: I2C mux reset completed, dev:, IO Exp addr:0x.(%FUNCTION/%s) (%HOST_I2C_DEVNAME/%s) (%IO_EXPDR_1/%x)"
0x1001000000000036 "BCM56XXD driver error: Error resetting mux and IO expander (%whatc_str/%s)"
0x1001000000000037 "BCM56XXD SDK error: SDK error deleting l2 BPDU entry: (%bcm_errmsg_rv/%s)"
0x1001000000000038 "BCM56XXD SDK error: SDK error configuring l2 BPDU entry: (%bcm_errmsg_rv/%s)"
0x1001000000000039 "BCM56XXD driver error: ip hash field group does not support an ODD number of HSBs.(%totalHSB/%d)"
0x1001000000000040 "BCM56XXD driver error: IFP port init failed (No device)"
0x1001000000000041 "BCM56XXD info: Invalid Ifp redirect params"
0x1001000000000042 "BCM56XXD info: Created global cos user entry .(%dev_field_entry_cos/%d)"
0x1001000000000043 "BCM56XXD info: Deleted global cos user entry .(%dev_field_entry_cos/%d)"
0x1001000000000044 "BCM56XXD SDK error: Error calling soc_cm_mdebug_init"
0x1001000000000045 "BCM56XXD SDK error: Error calling soc_mdebug_init"
0x1001000000000046 "BCM56XXD SDK error: Error updating debug flag (lx) for module (%debug_level/%s) (%mod/%s)"
0x1001000000000047 "BCM56XXD SDK error: Error calling bcm_mdebug_init"
0x1001000000000048 "BCM56XXD SDK error: Error fetch debug config for module (%mod_name/%s)"
0x1001000000000049 "BCM56XXD SDK error: Error fetch debug encoding () for module (%dbg_cfg_lvl_names_i/%s) (%mod_name/%s)"
0x1001000000000050 "BCM56XXD SDK error: Unable to get sc from unit= port=(%unit/%d) (%port/%d)"
0x1001000000000051 "BCM56XXD SDK error: Trouble enabling mirror - interface not initialized(%sc_ifname/%s)"
0x1001000000000052 "BCM56XXD SDK error: Trouble with bcm_mirror_mode() (%bcm_errmsg_status/%s)"
0x1001000000000053 "BCM56XXD SDK error: Trouble with bcm_mirror_to_set() (%bcm_errmsg_status/%s)"
0x1001000000000054 "BCM56XXD SDK error: Trouble with bcm_egress_set() (%bcm_errmsg_status/%s)"
0x1001000000000055 "BCM56XXD SDK error: Trouble with bcm_mirror_to_pbmp_set() (%bcm_errmsg_status/%s)"
0x1001000000000056 "BCM56XXD driver error: Trouble getting softc for unit= port=(%unit/%d) (%port/%d)"
0x1001000000000057 "BCM56XXD SDK error: Trouble with bcm_egress_clear() (%bcm_errmsg_status/%s)"
0x1001000000000058 "BCM56XXD SDK error: Trouble with bcm_ingress_clear() (%bcm_errmsg_status/%s)"
0x1001000000000059 "BCM56XXD SDK error: Trouble with bcm_mirror_set() (%bcm_errmsg_status/%s)"
0x1001000000000060 "BCM56XXD SDK error: Trouble with bcm_mirror_conduit_higig_set() (%bcm_errmsg_status/%s)"
0x1001000000000061 "BCM56XXD SDK error: Trunk port trouble with bcm_mirror_port_set() (%bcm_errmsg_status/%s)"
0x1001000000000062 "BCM56XXD SDK error: Non-trunk port trouble with bcm_mirror_port_set() (%bcm_errmsg_status/%s)"
0x1001000000000063 "BCM56XXD driver error: Trouble committing mirror settings to hardware: :(%sc_mirror_to_dev_unit/%d) (%sc_mirror_to_physport/%d)"
0x1001000000000064 "BCM56XXD driver error: Trouble committing CML settings to hardware: :(%sc_mirror_to_dev_unit/%d) (%sc_mirror_to_physport/%d)"
0x1001000000000065 "BCM56XXD info: port mirror (tcpdump) from to CPU.(%enable_0_enabledisable/%s) (%sc_ifname/%s)"
0x1001000000000066 "BCM56XXD info: tcpdump limit: 200 packets per second."
0x1001000000000067 "BCM56XXD SDK error: trouble with bcm_mirror_port_get():(%bcm_errmsg_rv/%s)"
0x1001000000000068 "BCM56XXD SDK error: Trouble with bcm_mirror_port_set():(%bcm_errmsg_rv/%s)"
0x1001000000000069 "BCM56XXD driver error: Trouble in bs_mirror_set to (%sc_from_ifname/%s) (%sc_conduit_ifname/%s)"
0x1001000000000070 "BCM56XXD driver error: Oops. API problem. from and conduit not on same device"
0x1001000000000071 "BCM56XXD driver error: Cannot map egress port from modid "
0x1001000000000072 "BCM56XXD SDK error: Trouble with bcm_mirror_to_pvmp_set() (%bcm_errmsg_rv/%s)"
0x1001000000000073 "Memory allocation failed: (const char*)'Cannot allocate pkt Q data store, unit=(%unit/%d)"
0x1001000000000074 "BCM56XXD SDK error: (const char*)'Cannot allocate pkt Q lock, unit=(%unit/%d)"
0x1001000000000075 "BCM56XXD SDK error: (const char*)'RX already running, unit=(%unit/%d)"
0x1001000000000076 "BCM56XXD SDK error: (const char*)'Error setting rx packet rate limit, unit= (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000077 "BCM56XXD SDK error: Error setting up rx DMA, unit= (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000078 "BCM56XXD SDK error: Error registering rx dma callback, unit= error=(%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000079 "BCM56XXD info: Trouble restoring cpu mirror afterflood control. unit: , reenable(%pr_sc_dev_unit/%d)"
0x1001000000000080 "BCM56XXD info: bs_packet_register :: reenablingcpu mirror () delay=s(%pr_client_id/%s) (%sec_packet_registry_i_mirror_halted/%d)"
0x1001000000000081 "BCM56XXD driver error: No free space in packet registry"
0x1001000000000082 "BCM56XXD SDK error: Trouble setting up mirror from to CPU(%pr_sc_ifname/%s)"
0x1001000000000083 "BCM56XXD driver error: Trouble setting up mirror from to CPU(%sc_ifname/%s)"
0x1001000000000084 "Memory allocation failed: Cannot allocate memory for higig pkt of size=(%send_len/%d)"
0x1001000000000085 "BCM56XXD driver error: Trouble deleting mirror from to CPU(%pr_sc_ifname/%s)"
0x1001000000000086 "BCM56XXD driver error: Unable to convert unit= to device(%unit/%d)"
0x1001000000000087 "BCM56XXD driver error: Unable to convert u=, p= to soft struct(%unit/%d) (%pkt_rx_port/%d)"
0x1001000000000088 "BCM56XXD SDK error: Trouble halting mirror for flood control (%pr_client_id/%s)"
0x1001000000000089 "BCM56XXD info: bs_packet_rx () unit= FULL!flags() halt mirror of (%pr_client_id/%s) (%unit/%d) (%pkt_flags/%x) (%pr_sc_ifname/%s)"
0x1001000000000090 "BCM56XXD info: Queue Full, unit: (%sc_dev_unit/%d)"
0x1001000000000091 "BCM56XXD driver error: No packet to free in tx callback, unit=(%unit/%d)"
0x1001000000000092 "BCM56XXD driver error: TX packet length too long. TX aborted(%pkt_data_len/%d)"
0x1001000000000093 "BCM56XXD info: Tx Aborted. Link(s) not UP yet. unit=, tx_ports=(%unit/%d) (%pbmppbits/%x)"
0x1001000000000094 "BCM56XXD SDK error: Bad vs_packet_tx() pkt alloc, unit=(%unit/%d)"
0x1001000000000096 "BCM56XXD info: bcm_tx failed. , unit=, pkt=(%bcm_errmsg_rv/%s) (%unit/%d) (%pkt/%p)"
0x1001000000000097 "BCM56XXD info: Stuck (retries exhausted)"
0x1001000000000098 "BCM56XXD info: Active tx DMA on unit=(%unit/%d)"
0x1001000000000099 "BCM56XXD driver error: Config property exceeds max len:(%char_buf/%s)"
0x1001000000000100 "BCM56XXD info: Turning off learning and en_ifilter settings for (%ifname/%s)"
0x1001000000000101 "BCM56XXD driver error: Unable to disable learning on : (%ifname/%s) (%rv/%d)"
0x1001000000000102 "BCM56XXD SDK error: Unable to turn off ingress filtering for : (%ifname/%s) (%bcm_errmsg_rv/%s)"
0x1001000000000103 "BCM56XXD driver error: Unable to find soft struct for (%ifname/%s)"
0x1001000000000104 "BCM56XXD driver error: PortControlLane set failed. p= err:(%port/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000105 "BCM56XXD driver error: Port speed set failed. p= err:(%port/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000106 "BCM56XXD driver error: port data structure not found for port=(%port/%d)"
0x1001000000000107 "BCM56XXD info: Enable higig2 mode on higig ports of unit .(%unit/%d)"
0x1001000000000108 "BCM56XXD info: Enable module loopback mode on higig ports of unit .(%unit/%d)"
0x1001000000000109 "BCM56XXD driver error: Failed to set module loopback on unit port . (%unit/%d) (%i/%d)"
0x1001000000000110 "BCM56XXD info: bcm56xxd: unit port bundle state: (%unit/%d) (%port/%d) (%BUNDLE_ENABLED_pc/%d)"
0x1001000000000111 "BCM56XXD error: Platform is not supported"
0x1001000000000112 "BCM56XXD driver error: Unable to find specified platform id=, unit=(%platform_id/%x) (%unit/%x)"
0x1001000000000113 "BCM56XXD driver error: Trouble settting transmit phase interpolation for unit=, port=, offset=0x%02x, data=0x%04x(%unit/%d) (%txpis_i_port/%d) (%offset/%x) (%data/%x)"
0x1001000000000114 "BCM56XXD SDK error: SDK error: (%bcm_errmsg_rv/%s)"
0x1001000000000115 "BCM56XXD driver error: Unable to find vlan member in QinQ Map for vlan<:>(%sc_ifname/%s) (%vlan_vid/%d) (%vlan_cvid/%d)"
0x1001000000000116 "BCM56XXD driver error: Error adding '' to QinQ VLAN :(%sc_ifname/%s) (%vlan_vid/%d) (%vlan_cvid/%d)"
0x1001000000000117 "BCM56XXD driver error: Trouble deleting port from QinQ VLAN<:>(%port/%d) (%vlan_vid/%d) (%vlan_cvid/%d)"
0x1001000000000118 "BCM56XXD driver error: Unable to find QinQ data for port vlan<:>(%port/%d) (%vlan_vid/%d) (%vlan_cvid/%d)"
0x1001000000000119 "BCM56XXD driver error: Unable to select VLAN priority, port:, mode:(%port/%d) (%cos_mode/%d)"
0x1001000000000120 "BCM56XXD driver error: ERROR: Invalid gport =0x (%gport/%x)"
0x1001000000000121 "BCM56XXD driver error: Unable to find software structure for unit=, port=(%unit/%d) (%port/%d)"
0x1001000000000122 "BCM56XXD driver error: Unable to find software structure for unit=, trunk=(%unit/%d) (%tid/%d)"
0x1001000000000123 "BCM56XXD driver error: Unable to get default ingress action for port= SDK Error: (%ext_port/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000124 "BCM56XXD driver error: Unable to get default egress action for port=, SDK Error: (%ext_port/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000125 "BCM56XXD driver error: Unable to find VLAN / for port (%statssvid/%d) (%statscvid/%d) (%port/%d)"
0x1001000000000126 "BCM56XXD driver error: Unable to get tag data for VLAN /, port (%statssvid/%d) (%statscvid/%d) (%sc_ifname/%s)"
0x1001000000000127 "Memory allocation failed: Failed to allocate STP data store, unit=, port=(%dev_unit/%d) (%i/%d)"
0x1001000000000128 "Memory allocation failed: Failed to allocate STP data store, unit=, trunk=(%dev_unit/%d) (%trunk_trunk_name/%s)"
0x1001000000000129 "BCM56XXD driver error: Cannot destroy default STG (%stp_stg/%d)"
0x1001000000000130 "BCM56XXD SDK error: Trouble destroying STG , (%stp_stg/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000131 "Memory allocation failed: Cannot allocate cluster interface data store."
0x1001000000000132 "BCM56XXD driver error: Static L2 init failed for remote port=, (%ifname/%s) (%port_id/%d)"
0x1001000000000133 "BCM56XXD driver error: Trunk name already in use (%name/%s)"
0x1001000000000134 "BCM56XXD driver error: Trunk resources exhausted, unit=(%dev_unit/%d)"
0x1001000000000135 "BCM56XXD driver error: Warning: Possible memory leak. NULL expected for trunk_name"
0x1001000000000136 "Memory allocation failed: Unable to allocate trunk name space for (%name/%s)"
0x1001000000000137 "BCM56XXD driver error: STP init failed for trunk=(%name/%s)"
0x1001000000000138 "BCM56XXD driver error: Static L2 init failed for trunk=(%name/%s)"
0x1001000000000139 "BCM56XXD SDK error: bcm_trunk_chip_info_get: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000140 "BCM56XXD SDK error: Unable to find target trunk members(%trunk_trunk_id/%d)"
0x1001000000000141 "BCM56XXD driver error: Unable to program trunk id: (cmp:0x(%trunk_trunk_id/%d) (%cmp_state/%x)"
0x1001000000000142 "BCM56XXD driver error: Unable to find trunk name , unit=(%name/%s) (%unit/%d)"
0x1001000000000143 "BCM56XXD driver error: Invalid trunk ID , id=(%name/%s) (%tid/%d)"
0x1001000000000144 "BCM56XXD driver error: L2 stash restore failed for trunk (%trunk_trunk_name/%s)"
0x1001000000000145 "BCM56XXD SDK error: Unable to find target trunk in hardware(%tid/%d)"
0x1001000000000146 "BCM56XXD driver error: Trouble setting trunk: unit=, trunk=(%i_unit/%d) (%trunk_trunk_name/%s)"
0x1001000000000147 "BCM56XXD driver error: STP state set failed, unit=, trunk=(%unit/%d) (%name/%s)"
0x1001000000000148 "BCM56XXD driver error: Unable to find trunk name (%trunk_name/%s)"
0x1001000000000149 "BCM56XXD driver error: Requested port not a member :(%member_module_id/%d) (%member_physport/%d)"
0x1001000000000150 "BCM56XXD driver error: Trouble resetting qinq-ethertype, port (%member_ifname/%s)"
0x1001000000000151 "BCM56XXD SDK error: bs_trunk_addr_set: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000152 "BCM56XXD info: SDK error delete l2 entries for trunk on unit .(%bcm_errmsg_rv/%s) (%tid/%d) (%i_unit/%d)"
0x1001000000000153 "BCM56XXD driver error: Trouble removing trunk hash filters: unit=(%i_unit/%d)"
0x1001000000000154 "BCM56XXD SDK error: Trouble setting trunk , unit (%trunk_trunk_id/%d) (%dev_unit/%d)"
0x1001000000000155 "BCM56XXD SDK error: Trouble destroying trunk , unit (%trunk_trunk_id/%d) (%dev_unit/%d)"
0x1001000000000156 "BCM56XXD info: SDK error delete l2 entriesfor trunk on unit (%bcm_errmsg_rv/%s) (%trunk_trunk_id/%d) (%dev_unit/%d)"
0x1001000000000157 "BCM56XXD driver error: Trouble setting trunk hash filters: unit , hash=(%dev_unit/%d) (%trunk_hash/%d)"
0x1001000000000158 "BCM56XXD driver error: Unable to match module id for module (%mod_id/%d)"
0x1001000000000159 "BCM56XXD driver error: Error: Bad input pointers."
0x1001000000000160 "BCM56XXD SDK error: Trouble reading trunk info from hardware: trunk=, tid=, rv= on unit .(%trunk_trunk_name/%s) (%trunk_trunk_id/%d) (%rv/%d) (%unit/%d)"
0x1001000000000161 "BCM56XXD SDK error: Trouble removing FFP filter from hardware, SDK error (%bcm_errmsg_rv/%s)"
0x1001000000000162 "BCM56XXD SDK error: Trouble deleting FFP filter, SDK error (%bcm_errmsg_rv/%s)"
0x1001000000000163 "BCM56XXD SDK error: bcm_trunk_create_id: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000164 "BCM56XXD SDK error: bs_gport_trunk_set: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000165 "BCM56XXD info: Configure port based RTAG7 hash on unit .(%unit/%d)"
0x1001000000000166 "BCM56XXD info: Configure RTAG7 hash on unit .(%unit/%d)"
0x1001000000000167 "BCM56XXD driver error: Unable to convert invalid slot number: slot=, port=(%slot/%d) (%port/%d)"
0x1001000000000168 "BCM56XXD driver error: Unable to convert invalid port number: slot=, port=(%slot/%d) (%port/%d)"
0x1001000000000169 "BCM56XXD SDK error: Error setting unit=, port= default vlan id(%unit/%d) (%port/%d)"
0x1001000000000170 "BCM56XXD driver error: Incorrect PCI memory address space : (%PRETTY_FUNCTION/%s) (%LINE/%d)"
0x1001000000000171 "BCM56XXD driver error: Failed to open /dev/mem : (%PRETTY_FUNCTION/%s) (%LINE/%d)"
0x1001000000000172 "BCM56XXD driver error: : mmap failed with error (%PRETTY_FUNCTION/%s)"
0x1001000000000173 "BCM56XXD driver error: Error: chassis_slot not yet populated"
0x1001000000000174 "BCM56XXD driver error: Error: chassis_max_slots not yet populated"
0x1001000000000175 "BCM56XXD info: map unit higig port to hgm module id mac Id .(%unit/%d) (%port/%d) (%mod_id/%d) (%mac_id/%d)"
0x1001000000000176 "BCM56XXD info: Increment HA heartbeat from , line (%func/%s) (%line/%d)"
0x1001000000000177 "BCM56XXD driver error: Unable to find vlan member in vlan : (%vlan_vid/%d) (%vlan_cvid/%d)"
0x1001000000000178 "BCM56XXD driver error: Cannot add a trunk member to a vlan"
0x1001000000000179 "BCM56XXD driver error: No support for multiple untagged vlan ports"
0x1001000000000180 "BCM56XXD driver error: Unable to find free member space in vlan (%vlan_vid/%d)"
0x1001000000000181 "BCM56XXD driver error: Trouble adding member to QinQ vlan (%sc_ifname/%s) (%vlan_vid/%d)"
0x1001000000000182 "BCM56XXD driver error: Trunk workers cannot have their VLANs changed, unit=(%dev_unit/%d)"
0x1001000000000183 "BCM56XXD driver error: Could not enable port learning unit , port (%dev_unit/%d) (%p/%d)"
0x1001000000000184 "BCM56XXD driver error: Problem changing vlan id unit=, old vid=(%unit/%d) (%vid/%d)"
0x1001000000000185 "BCM56XXD driver error: Problem changing vlan id /, unit=(%vid/%d) (%cvid/%d) (%unit/%d)"
0x1001000000000186 "Memory allocation failed: Error allocating vlan data store, unit=, vid=(%dev_unit/%d) (%vid/%d)"
0x1001000000000187 "Memory allocation failed: Error allocating vlan member list store, unit=, vid=(%dev_unit/%d) (%vid/%d)"
0x1001000000000188 "BCM56XXD driver error: Attempt to delete non-existent VLAN vid=/(%vid/%d) (%cvid/%d)"
0x1001000000000189 "BCM56XXD driver error: Trunk already exists on vlan (%trunk_trunk_name/%s) (%next_vlan_vid/%d)"
0x1001000000000190 "BCM56XXD driver error: Trouble adding trunk member to vlan (%vs_softc_t_trunk_members_i_ifname/%s) (%vlan_vid/%d)"
0x1001000000000191 "BCM56XXD driver error: Unable to add trunk to vlan /(%trunk_trunk_id/%d) (%vid/%d) (%cvid/%d)"
0x1001000000000192 "BCM56XXD driver error: Unable to find vlan , on unit (%vid/%d) (%i/%d)"
0x1001000000000193 "BCM56XXD driver error: Unable to find free member space in vlan , unit (%vid/%d) (%i/%d)"
0x1001000000000194 "BCM56XXD driver error: Trunk not a member of vlan (%trunk_trunk_name/%s) (%vlan_vid/%d)"
0x1001000000000195 "BCM56XXD driver error: Unable to delete trunk from vlan /(%trunk_trunk_id/%d) (%vid/%d) (%cvid/%d)"
0x1001000000000196 "BCM56XXD driver error: Problem changing CVID:, VLAN:/ not found(%new_cvid/%d) (%vid/%d) (%old_cvid/%d)"
0x1001000000000197 "BCM56XXD driver error: Problem changing CVID:, VLAN:/(%new_cvid/%d) (%vid/%d) (%old_cvid/%d)"
0x1001000000000198 "BCM56XXD driver error: Trouble setting ether-type for member (%sc_ifname/%s)"
0x1001000000000199 "BCM56XXD SDK error: Bad trunk change handler register, unit=(%unit/%d)"
0x1001000000000200 "BCM56XXD SDK error: Bad linkscan change handler register, unit=(%unit/%d)"
0x1001000000000201 "BCM56XXD driver error: Trunk hash not recognized(%mcp_hash/%d)"
0x1001000000000202 "BCM56XXD driver error: Error deleting trunk on unit (%trunk_name/%s) (%dev_unit/%d)"
0x1001000000000203 "BCM56XXD info: Trunk not found(%trunk_name/%s)"
0x1001000000000204 "BCM56XXD driver error: Error: Internal insanity"
0x1001000000000205 "BCM56XXD driver error: Error creating trunk on unit (%trunk_name/%s) (%dev_unit/%d)"
0x1001000000000206 "BCM56XXD driver error: Error trunk already exists on unit (%trunk_name/%s) (%dev_unit/%d)"
0x1001000000000207 "BCM56XXD driver error: Trunk has working members on unit (%trunk_name/%s) (%dev_unit/%d)"
0x1001000000000208 "BCM56XXD driver error: Unable to find Non fabricswitch on this platform to support remote trunk member."
0x1001000000000209 "BCM56XXD driver error: Trouble adding interface to trunk=(%csc_ifname/%s) (%trunk_name/%s)"
0x1001000000000210 "BCM56XXD driver error: Trouble deleting interface from trunk=(%csc_ifname/%s) (%trunk_name/%s)"
0x1001000000000211 "BCM56XXD driver error: Error trunk on unit does not exist(%trunk_name/%s) (%sc_dev_unit/%d)"
0x1001000000000212 "BCM56XXD driver error: Error setting trunk hash value (%trunk_name/%s) (%bs_hash/%d)"
0x1001000000000213 "BCM56XXD driver error: Cannot change ID of active trunk from to (%trunk_name/%s) (%trunk_trunk_id/%d) (%id/%d)"
0x1001000000000214 "BCM56XXD info: Trunk not found in bsx_trunk_id_set.(%trunk_name/%s)"
0x1001000000000215 "BCM56XXD info: Trunk not found in bsx_trunk_tpid_set.(%trunk_name/%s)"
0x1001000000000216 "BCM56XXD info: (%X/%d) (%builtin_return_address/%p)"
0x1001000000000217 "BCM56XXD driver error: ERROR: Assertion ()(%expr/%s)"
0x1001000000000218 "BCM56XXD info: stack trace:"
0x1001000000000219 "BCM56XXD driver error: Exiting after assert failure at : (%file/%s) (%line/%d)"
0x1001000000000220 "BCM56XXD driver error: Port lookup failed on unit invalid port:(%sdk_unit/%d) (%sdk_port/%d)"
0x1001000000000221 "BCM56XXD driver error: Unable to find platform info for unit= dev_id=0x(%unit/%d) (%dev_id/%x)"
0x1001000000000222 "BCM56XXD SDK error: custome_pre_init() failed: unit=(%unit/%d)"
0x1001000000000223 "BCM56XXD driver error: Error setting PID to in BHW(%bs_platform_ext_get_bhw_pid/%s)"
0x1001000000000224 "BCM56XXD driver error: bhw_init_hw failed: sdk return=(%bcm_ret/%d)"
0x1001000000000225 "BCM56XXD SDK error: Detected 0 devices waiting 5s..."
0x1001000000000226 "BCM56XXD driver error: bs_bhw_lp_init failed: sdk return=(%bcm_ret/%d)"
0x1001000000000227 "BCM56XXD SDK error: mdebug_init failed"
0x1001000000000228 "BCM56XXD driver error: bs_if_attach() failed: unit=(%unit/%d)"
0x1001000000000229 "BCM56XXD info: bcm56xxd: attached unit ()(%unit/%d) (%soc_dev_name_unit/%s)"
0x1001000000000230 "BCM56XXD driver error: bs_if_hw_start() failed: unit=(%unit/%d)"
0x1001000000000231 "BCM56XXD driver error: bs_arl_init() failed"
0x1001000000000232 "BCM56XXD driver error: SFP disable failed for PORT=(%port/%d)"
0x1001000000000233 "BCM56XXD driver error: Non-SFP disable failed for PORT=(%port/%d)"
0x1001000000000234 "BCM56XXD SDK error: Error bcm_stk_ucbitmap_set, unit=(%unit/%d)"
0x1001000000000235 "Memory allocation failed: Cannot VLAN ref cnt data, unit=(%unit/%d)"
0x1001000000000236 "Memory allocation failed: Cannot allocate interface data store, unit=(%unit/%d)"
0x1001000000000237 "Memory allocation failed: Cannot allocate trunk data store, unit=(%unit/%d)"
0x1001000000000238 "BCM56XXD SDK error: Cannot allocate trunk lock mutex, unit=(%unit/%d)"
0x1001000000000239 "BCM56XXD driver error: Device initialization failed, unit=(%unit/%d)"
0x1001000000000240 "BCM56XXD SDK error: custome_post_init() failed: unit=(%unit/%d)"
0x1001000000000241 "BCM56XXD driver error: Interface initialization failure, unit=(%unit/%d)"
0x1001000000000242 "BCM56XXD info: Enable HIGIG lookup mode for higig port=(%hg_port/%d)"
0x1001000000000243 "BCM56XXD SDK error: Error calling bcm_init_phy_id_map unit= with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000244 "BCM56XXD SDK error: Error bringing up internal interfaces unit=, => port=.(%unit/%d) (%lrv/%d) (%i/%d)"
0x1001000000000245 "BCM56XXD SDK error: Error bcm_stk_my_modid_set, unit=(%unit/%d)"
0x1001000000000246 "BCM56XXD SDK error: Error bcm_stk_modport_set, unit=(%unit/%d)"
0x1001000000000247 "BCM56XXD driver error: Error creating 8021D field group, unit=(%dev_unit/%d)"
0x1001000000000248 "BCM56XXD driver error: Error creating LACPDU field filter, unit=(%dev_unit/%d)"
0x1001000000000249 "BCM56XXD driver error: Error creating STP BPDU FFPs, unit=(%dev_unit/%d)"
0x1001000000000250 "BCM56XXD driver error: Error creating LLDPDU field filter, unit=(%dev_unit/%d)"
0x1001000000000251 "BCM56XXD info: field group entries installed for trapping 8021D packets to CPU."
0x1001000000000252 "BCM56XXD driver error: Error creating LACPDU FFPs, unit=(%dev_unit/%d)"
0x1001000000000253 "BCM56XXD SDK error: Trouble initializing higig : SDK error (%bcm_errmsg_rv/%s)"
0x1001000000000254 "BCM56XXD SDK error: Error loading LED code, unit=(%unit/%d)"
0x1001000000000255 "BCM56XXD SDK error: Error registering link led handler, unit=(%unit/%d)"
0x1001000000000256 "BCM56XXD SDK error: Error setting bcm_port_linkscan (unit=) : port (%unit/%d) (%SOC_PORT_NAME_unit/%s)"
0x1001000000000257 "BCM56XXD driver error: Error initializing STP data store, unit=(%unit/%d)"
0x1001000000000258 "BCM56XXD driver error: Error initializing raw packet subsystem, unit=(%unit/%d)"
0x1001000000000259 "BCM56XXD driver error: Error disabling port based vlans, unit=(%unit/%d)"
0x1001000000000260 "BCM56XXD SDK error: Error enabling tagged packet filgering (unit=) : port (%unit/%d) (%SOC_PORT_NAME_unit/%s)"
0x1001000000000261 "BCM56XXD SDK error: Unable to set single COS queue unit=, (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000262 "BCM56XXD SDK error: Error enabling BPDU reception, unit=, port=(%unit/%d) (%p/%d)"
0x1001000000000263 "BCM56XXD SDK error: Error enabling HG BPDU reception, unit=, port=(%unit/%d) (%p/%d)"
0x1001000000000264 "BCM56XXD driver error: Error initializing hardware, unit=(%dev_unit/%d)"
0x1001000000000265 "BCM56XXD SDK error: bcm_port_linkscan_set failed, unit=(%dev_unit/%d)"
0x1001000000000266 "BCM56XXD SDK error: port linkscan disable failed, unit=, port=(%dev_unit/%d) (%sc_physport/%d)"
0x1001000000000267 "BCM56XXD driver error: bs_if_initialize: can't read port_ability for (%sc_ifname/%s)"
0x1001000000000268 "BCM56XXD SDK error: Port enable failed, unit=, physport=(%dev_unit/%d) (%sc_physport/%d)"
0x1001000000000269 "BCM56XXD SDK error: Port autoneg set failed, unit=, physport=(%dev_unit/%d) (%sc_physport/%d)"
0x1001000000000270 "BCM56XXD SDK error: Initializing port settings failed, unit=, physport=(%dev_unit/%d) (%sc_physport/%d)"
0x1001000000000271 "BCM56XXD driver error: // 'bs_if_initialize called for l2_stash: for (%sc_ifname/%s)"
0x1001000000000272 "BCM56XXD driver error: Static L2 init failed for port=, unit=(%sc_physport/%d) (%dev_unit/%d)"
0x1001000000000273 "BCM56XXD driver error: bs_if_reinitialize_all: trouble getting soft struct, unit=(%dev_unit/%d)"
0x1001000000000274 "BCM56XXD driver error: bs_if_reinitialize_all: trouble reprobing ports, unit=(%dev_unit/%d)"
0x1001000000000275 "BCM56XXD driver error: bs_if_reinitialize_all: can't init (%sc_ifname/%s)"
0x1001000000000276 "BCM56XXD driver error: bs_if_initialize_all: trouble getting soft struct, unit=(%dev_unit/%d)"
0x1001000000000277 "BCM56XXD driver error: bs_if_initialize_all: can't init (%sc_ifname/%s)"
0x1001000000000278 "BCM56XXD SDK error: In bs_if_linkscan_disable bcm_linkscan_disable on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000279 "BCM56XXD SDK error: In bs_if_syshalt bcm_rx_stop on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000280 "BCM56XXD SDK error: In bs_if_syshalt bcm_detach on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000281 "BCM56XXD SDK error: In bs_if_syshalt soc_detach on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000282 "BCM56XXD SDK error: [bs_if_set_rate_limit]bcm_rate_type_set() fails for unit : (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000283 "BCM56XXD SDK error: writing dynamic buf limit. unit : (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000284 "BCM56XXD driver error: setting MTU for unit ,port to failed.(%unit/%d) (%port/%d) (%size/%d)"
0x1001000000000285 "BCM56XXD SDK error: [bs_if_set_wred]bcm_cosq_discard_set() fails for unit : (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000286 "BCM56XXD SDK error: [bs_if_set_wred]bcm_cosq_discard_port_set() fails for unit : (%unit/%d) (%bcm_errmsg_rv/%s)"
0x1001000000000287 "BCM56XXD info: unit : Customize buffering: total dyn pool=%%, dyn per port=%% (bytes/port: static= dyn=, total: static= dyn= oversub:)(%unit/%d) (%max_dyn_total/%d) (%max_dyn_port/%d) (%fix_limit_128/%d) (%dyn_limit_128/%d) (%fix_total_128/%d) (%dyn_total_128/%d) (%fix_total_dyn_limitnports_ncells_128/%d)"
0x1001000000000288 "BCM56XXD info: Setting burst factor to %% (alpha: val:) (%max_dyn_total/%d) (%alpha/%d) (%alpha_reg/%d)"
0x1001000000000289 "BCM56XXD info: Configure unit egress dynamic threshold alpha value to .(%unit/%d) (%alpha_regval/%d)"
0x1001000000000290 "BCM56XXD info: Configure unit ingress PG7 dynamic threshold alpha value to .(%unit/%d) (%alpha_regval/%d)"
0x1001000000000291 "BCM56XXD info: Configure unit ingress PG7 static threadshold shared limit cell to 0x.(%unit/%d) (%max_cells/%x)"
0x1001000000000292 "BCM56XXD info: Received signal: ()(%signame_signame_UNKNOWN/%s) (%sig/%d)"
0x1001000000000293 "BCM56XXD info: fault addr: (%info_si_addr/%x)"
0x1001000000000294 "BCM56XXD info: fault code: 0x(%info_si_code/%x)"
0x1001000000000295 "BCM56XXD info: state: ()(%sync_statename_get_state/%s) (%state/%x)"
0x1001000000000296 "BCM56XXD info: check for active transmit DMAs:"
0x1001000000000297 "BCM56XXD error: only valid for dataplane switch(%FUNCTION/%s)"
0x1001000000000298 "BCM56XXD error: Num ports exceeds cc_switchd_pmap size"
0x1001000000000299 "BCM56XXD notice: slot pkt: (%fmt_slotid_packet_slotid_packet/%s)"
0x1001000000000300 "BCM56XXD error: bcm_port_link_status_get port FAILED (%sc_ifname/%s) (%rc/%d)"
0x1001000000000301 "BCM56XXD info: link for port is not UP(%sc_ifname/%s)"
0x1001000000000302 "BCM56XXD error: vs_packet_tx on failed (%sc_ifname/%s) (%rc/%d)"
0x1001000000000303 "BCM56XXD error: Cannot find ventry for (%vname/%s)"
0x1001000000000304 "BCM56XXD error: NULL trunk on port for (%sc_ifname/%s)"
0x1001000000000305 "BCM56XXD error: failed to add lagg to vlan (%ccswp_plagg_role_name/%s) (%vname/%s)"
0x1001000000000306 "BCM56XXD error: failed to delete lagg from vlan (%ccswp_plagg_role_name/%s) (%vname/%s)"
0x1001000000000307 "BCM56XXD error: Unknown update operation (%role_name/%s) (%vname/%s)"
0x1001000000000308 "BCM56XXD error: vlan lagg update failed"
0x1001000000000309 "BCM56XXD error: Adding port to vlan failed(%sc_ifname/%s) (%vname/%s)"
0x1001000000000310 "BCM56XXD error: Deleting port from vlan failed(%sc_ifname/%s) (%vname/%s)"
0x1001000000000311 "BCM56XXD error: ifname() trunk_name() failed err() (%sc_ifname/%s) (%trunk_name/%s) (%rc/%d)"
0x1001000000000312 "BCM56XXD error: Failed to add interface() to trunk() err= (%slotted_ifname/%s) (%trunk_name/%s) (%rc/%d)"
0x1001000000000313 "BCM56XXD error: bsx_trunk create_default failed to create trunk id (%new_lagg_role_name_0/%s) (%new_lagg_lagg_id/%d)"
0x1001000000000314 "BCM56XXD info: Exiting before adding all portsmbrs_added(), new_lagg->num_mbrs() laggname (%mbrs_added/%d) (%new_lagg_num_mbrs/%d) (%new_lagg_role_name_0/%s)"
0x1001000000000315 "BCM56XXD error: Adding port to trunk failed(%port_idx/%d) (%new_lagg_role_name/%s)"
0x1001000000000316 "BCM56XXD starting up: Initializing switch devices"
0x1001000000000317 "BCM56XXD error: Trouble initializing switch devices"
0x1001000000000318 "BCM56XXD error: Failed to add cluster interface for , modid (%slotted_ifname/%s) (%bs_dev_modid/%d)"
0x1001000000000319 "BCM56XXD error: Failed to flush arl table"
0x1001000000000320 "BCM56XXD error: Cannot populate cluster interface (%slotted_ifname/%s)"
0x1001000000000321 "BCM56XXD starting up: BCM56xxd starting. debug=, foreground=, packet=, bcm_debug=0xlx, soc_debug=0xlx(%debug/%d) (%foreground/%d) (%packet_interface_enable/%d)"
0x1001000000000322 "BCM56XXD error: switchd_bs: Cannot find bs platform"
0x1001000000000323 "BCM56XXD error: Number of devs found () exceeds CC_SWITCH_MAX_SWITCHES ()(%num_bs_devs/%d) (%CC_SWITCH_MAX_SWITCHES/%d)"
0x1001000000000324 "BCM56XXD error: Alloc of of cc_switch_info_t failed"
0x1001000000000325 "BCM56XXD error: Cannot determine switch role"
0x1001000000000326 "BCM56XXD error: Role for switch unit unknown(%bs_devcfg_unit/%d)"
0x1001000000000327 "BCM56XXD notice: Disabling port(idx(), name(), phys_port()) on switch(Unit() swinst()) (%bs_idx/%d) (%bs_port_ifname_bs_port_ifname_unknown/%s) (%bs_port_physport/%d) (%bs_devcfg_unit/%d) (%swinst_switch_handlerole_CC_SWITCH_OVERLAY_overlay_data_planen/%s)"
0x1001000000000328 "BCM56XXD SDK error: Error taking down internal interfaces unit=, => port=.(%bs_devcfg_unit/%d) (%lrv/%d) (%bs_idx/%d)"
0x1001000000000329 "BCM56XXD error: Cannot determine platform_id"
0x1001000000000330 "BCM56XXD notice: Enabling stp passthrough mode "
0x1001000000000331 "BCM56XXD error: BCM56xxd failed to daemonize"
0x1001000000000332 "BCM56XXD error: Exiting due to hardware init failure"
0x1001000000000333 "BCM56XXD error: Cannot map bs info to cc switchd"
0x1001000000000334 "BCM56XXD driver error: Failure setting STP passthrough mode "
0x1001000000000335 "pthread_cond_timedwait returns "
0x1001000000000336 "lock failure "
0x1001000000000337 "unlock failure "
0x1001000000000338 "lock(bank_lock) failed: "
0x1001000000000339 "unlock(bank_lock) failed: "
0x1001000000000340 "No vlan matching key (%vlk/%d)"
0x1001000000000341 "member not in vlan (%mbr_idx/%d) (%vlan_vlan_id/%d)"
0x1001000000000342 "Unexpected vlan/mbr leaf"
0x1001000000000343 "confd_register_trans_cb FAILED (%confd_err/%s)"
0x1001000000000344 "confd_register_data_cb FAILED (%confd_err/%s)"
0x1001000000000345 "Call Unexpected"
0x1001000000000346 "Exit err (%ret/%d)"
0x1001000000000347 "No slots in VLAN vlan_id (%swvl_vlan_name/%s) (%swvl_vlan_id/%d)"
0x1001000000000348 "Partition is new but has no members yet(%ccp_name/%s)"
0x1001000000000349 "Create new vlan for cluster (%ccp_name/%s)"
0x1001000000000350 "Error, out of vlans, can't add vlan for cluster (%ccp_name/%s)"
0x1001000000000351 "No dataplane switch"
0x1001000000000352 "Cannot create mappi socket"
0x1001000000000353 "mappi_connect failed => (%confd_strerror_rc/%s)"
0x1001000000000354 "maapi_start_user_session failed => (%confd_strerror_rc/%s)"
0x1001000000000355 "maapi_start_trans Failed => (%confd_strerror_m_thandle/%s)"
0x1001000000000356 "maapi_set_namespace failed => (%confd_strerror_rc/%s)"
0x1001000000000357 "maapi_create failed for interface => (%if_name/%s) (%confd_strerror_rc/%s)"
0x1001000000000358 "config/name => (%if_name/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000359 "config/type => (%if_name/%s) (%type/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000360 "ethernet/config/type => (%if_name/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000361 "ethernet/config/duplex-mode => (%if_name/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000362 "Invalid cdb publish socket"
0x1001000000000363 "failed to start CDB_OPERATIONAL data session => (%confd_strerror_confd_errno/%s)"
0x1001000000000364 "failed to set cdb name space => (%confd_strerror_confd_errno/%s)"
0x1001000000000365 "Cannot fetch state for port , use defaults(%if_name/%s)"
0x1001000000000366 "cdb_set_values failed => (%confd_strerror_confd_errno/%s)"
0x1001000000000367 "Failed to publish interfaces"
0x1001000000000368 "Initial cdb operdata publish attempt failed"
0x1001000000000369 "Failed to open cdb_od_data_sock"
0x1001000000000370 "Cannot allocate the pubsub structure"
0x1001000000000371 "Platform initialization failed"
0x1001000000000372 "Failed to set switchd opermode "
0x1001000000000373 "FAILED to obtain CCPEER floating ip"
0x1001000000000374 "Cannot initialize cc sw"
0x1001000000000375 "Cannot start sdk command service"
0x1001000000000376 "/swcfg/switch[]/port[]/admin changed from to (%sw/%d) (%port/%d) (%swp_admnst_DNUP/%s) (%new_admnst_DNUP/%s)"
0x1001000000000377 "admin state of port on switch transitions to (%port/%d) (%SWINST_SWNAME_swinst/%s) (%pcfg_snap_ports_port_admnst_DNUP/%s)"
0x1001000000000378 "Make operstat for switch port reflect admin state(%SWINST_SWNAME_swinst/%s) (%port/%d)"
0x1001000000000379 "Failed to save stdout "
0x1001000000000380 "fclose stdout ()(%errno/%d)"
0x1001000000000381 "fdopen(STDOUT_FILENO, \'w\') failed ()(%errno/%d)"
0x1001000000000382 "Failed to dup STDOUT_FILENO "
0x1001000000000383 "fflush failed ()(%errno/%d)"
0x1001000000000384 "Close of stdout_sav() FAILED ()(%bcms_ss_stdout_sav/%d) (%errno/%d)"
0x1001000000000385 "Restore of STDOUT_FILENO via dup2 failed ()(%errno/%d)"
0x1001000000000386 "Cannot allocate rx buffer "
0x1001000000000387 "STUBBED"
0x1001000000000388 "Unable to ignore SIGPIPE "
0x1001000000000389 "getaddrinfo FAILED "
0x1001000000000390 "socked fails (re ) for ai_family(), ai_socketype(), ai_protocol() (%rp_ai_family/%d) (%rp_ai_socktype/%d) (%rp_ai_protocol/%d)"
0x1001000000000391 "setsockopt FAILED "
0x1001000000000392 "Switchd command server unavailable Could not bind socket to any address"
0x1001000000000393 "listen FAILED "
0x1001000000000394 "Accept failed "
0x1001000000000395 "bcmserv client already connected "
0x1001000000000396 "failed to duplicate accept soc for input(%accsoc/%d)"
0x1001000000000397 "Cannot fdopen(accsoc, \'r\') => "
0x1001000000000398 "close"
0x1001000000000399 "Needs BCMSDK"
0x1001000000000400 "BCM56XXD HAL message error: Trouble creating packet register error message:(%source_name/%s)"
0x1001000000000401 "BCM56XXD HAL message error: Trouble creating packet register error message payload:(%source_name/%s)"
0x1001000000000402 "BCM56XXD info: Got a wrong unit: and working owner for trunk .(%unit/%d) (%workingOwner/%d) (%trunk_trunk_name/%s)"
0x1001000000000403 "BCM56XXD HAL message error: Improper Packet Send message format"
0x1001000000000404 "BCM56XXD info: Abort packet send request from on unit , port (%source_name/%s) (%sc_dev_unit/%d) (%sc_physport/%d)"
0x1001000000000405 "BCM56XXD driver error: Improper interface specified in Packet Request (%ifname/%s)"
0x1001000000000406 "BCM56XXD driver error: Trouble with packet registration (%prclient_id/%s)"
0x1001000000000407 "BCM56XXD HAL message error: Timeout zero, client: (%source_name/%s)"
0x1001000000000408 "BCM56XXD error: f5zmqmsg init failed"
0x1001000000000409 "BCM56XXD HAL error: Trouble creating F5ZMQMSG thread: 0x(%f5zmqmsg_th/%x)"
0x1001000000000410 "BCM56XXD HAL message error: Trouble creating packet-to-client message payload: (%source_name/%s)"
0x1001000000000411 "BCM56XXD HAL message error: Cannot identify source interface for client packet"
0x1001000000000412 "BCM56XXD info: halSetHigigMirror timeout: retrying..."
0x1001000000000413 "BCM56XXD HAL error: Error calling halHigigMirror: (%status/%d)"
0x1001000000000414 "BCM56XXD driver error: Improper interface specified in (%SHELL_CMD_TRIGGER_FILE/%s) (%ifname/%s)"
0x1001000000000415 "BCM56XXD info: -----------------------------------------"
0x1001000000000416 "BCM56XXD info: BSC> (interface: unit:)(%cmd/%s) (%ifname/%s) (%sc_dev_unit/%d)"
0x1001000000000417 "BCM56XXD info: HAL Receive() non-zero result"
0x1001000000000418 "BCM56XXD info: : exiting(%FUNCTION/%s)"
0x1001000000000419 "(%msg/%s)"
0x1001000000000420 "Received a message of type UNKNOWN"
0x1001000000000421 "Cannot read active status from HAL"
0x1001000000000422 "Count rejected. Only default count() supported (%cnt/%d) (%SWITCHD_HAL_ITEM_INSTCNT_DFLT/%d)"
0x1001000000000423 "Failed to fopen hal log file /var/log_controller/switchd-hal"
0x1001000000000424 "Failed to fopen hal log file /dev/null"
0x1001000000000425 "hal_init failed!"
0x1001000000000426 "FAILED to get chassis slot number"
0x1001000000000427 "FAILED to get number of blade slots"
0x1001000000000428 "FAILED to get host type"
0x1001000000000429 "Nailing up platform parameters. Assuming (%switchd_rdoptshosttype/%s)"
0x1001000000000430 "Cannot determine hardware platform"
0x1001000000000431 "host type is not presently supported by swtichd(%switchd_hal_item_ccrtci_base_cc_host_type/%s)"
0x1001000000000432 "SLOT FORCED ACTIVE as (%switchd_hal_item_ccrtci_base_cc_slot_local/%d) (%switchd_rdoptsuflagsforce_active_CC_SWITCHD_FORCEACTIVE_OPERMODE_per_opermode_switchd_rdoptsuflagsforce_active_CC_SWITCHD_FORCEACTIVE_ACTIVE_active_stby/%s)"
0x1001000000000433 "Live Hal: host type , number of cc slots number of blade slots this cc slot (%switchd_hal_item_ccrtci_base_cc_host_type/%s) (%switchd_hal_item_ccrtci_base_cc_slots/%d) (%switchd_hal_item_ccrtci_base_cc_blade_slots/%d) (%switchd_hal_item_ccrtci_base_cc_slot_local/%d)"
0x1001000000000434 "expr() file() line()(%expr/%s) (%file/%s) (%line/%d)"
0x1001000000000435 "switchd running w/o bcmsdk "
0x1001000000000436 "Error fetching local slot"
0x1001000000000437 "Creating vlan id (%vname/%s) (%vid/%d)"
0x1001000000000438 "Error creating VLAN id(), name() => rc(%vid/%d) (%vname_vname_anonymouns/%s) (%rc/%d)"
0x1001000000000439 "Failed to ADD members to VLAN (%vid/%d)"
0x1001000000000440 "Failed to REMOVE members to VLAN (%vid/%d)"
0x1001000000000441 "vlan id() name() is empty; deleting(%vid/%d) (%vname_vname_anonymous/%s)"
0x1001000000000442 "switchd_bs_vlan_update(upd = CC_SWITCHD_VLANHW_DESTROY, vid = ) FAILED => (%vid/%d) (%rc/%d)"
0x1001000000000443 "Unknown action"
0x1001000000000444 "lagg should not be busy!(%laggs_num_laggs/%d)"
0x1001000000000445 "No mo free lagg entries"
0x1001000000000446 "Cannot allocate new lagg"
0x1001000000000447 "lagg is allocated but not busy???(%lagg_idx/%d)"
0x1001000000000448 "Setup of lage failed(%lagg_idx/%d)"
0x1001000000000449 "Failed to populate cluster interfaces"
0x1001000000000450 "FAILED to create overlay network laggs"
0x1001000000000451 "Cannot determine fixed overlay vlans"
0x1001000000000452 "base switch init failed: (%rc/%d)"
0x1001000000000453 "FAILED to initialize overlay switch"
0x1001000000000454 "Failed to get vlan port role map"
0x1001000000000455 "Failed to add CCHOST to map"
0x1001000000000456 "Failed to add CCPEER to map"
0x1001000000000457 "UNKNOWN op()(%switchd_act/%d)"
0x1001000000000458 "Error fetching local ha active status"
0x1001000000000459 "Nover overlay switch"
0x1001000000000460 "BCM56XXD driver error: Unable to find vlan member in vlan :(%sc_ifname/%s) (%vlan_vid/%d) (%vlan_cvid/%d)"
0x1001000000000461 "BCM56XXD SDK error: failed: SDK error (%funct_name/%s) (%bcm_errmsg_rv/%s)"
0x1001000000000462 "Message from BHW. (%bhw_msg/%s)"
0x1001000000000463 "Message from BHW. (%bhw_msg/%s)"
0x1001000000000464 "BCM56XXD HAL message error: Cannot determine RX endpt"
0x1001000000000465 "BCM56XXD HAL message error: Cannot find send handle for (%zmq_addr/%s)"
0x1001000000000466 "BCM56XXD driver error: No interface or trunk provided for packet client send"
0x1001000000000467 "Memory allocation failed: buf alloc failed"
0x1001000000000468 "SWITCHD_F5ZMQ message error: Failed to pack switchd f5zmq msg"
0x1001000000000469 "BCM56XXD HAL message error: switchd f5zmq add payload failure"
0x1001000000000470 "switchd halhealth message error: Unable to initialize health reporting"
0x1001000000000471 "BCM56XXD HAL message error: Trouble creating F5ZMQMSG thread: 0x(%f5zmqmsg_th/%x)"
0x1001000000000482 "BCM56XXD HAL message error: Error calling halHigigMirror: (%status/%d)"
0x1001000000000483 "SWITCHD_F5ZMQ: fzmq_init_thread_safe: rc() log and continue(%rc/%d)"
0x1001000000000484 "(%cbp/%s)"
0x1001000000000485 "Linkstatus change (%PORT/%s) (%LINKSTAT/%s)"
0x1001000000000486 "(%ERRMSG/%s)"
0x1001000000000487 "config/minlinks => (%if_name/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000488 "config/laggtype => (%if_name/%s) (%type/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000489 "config/port laggid => (%if_name/%s) (%confd_strerror_confd_errno/%s)"
0x1001000000000490 "config/socket"
0x1001000000000491 "config/lacp intf => (%if_name/%s) (%confd_strerror/%s)"
0x1001000000000492 "config/lagg port => (%port/%s) (%confd_strerror/%s)"
0x1001000000000493 "config/lagg (%laggname/%s)"
0x1001000000000494 "final switch init failed: (%rc/%d)"
0x1001000000000495 "SWITCHD_CMD_BCMSERV: Cannot create cmd_bcmserv thread (%pthcr_err/%d)"
0x1001000000000496 "SWITCHD_CMD_BCMSERV: Cannot join cmd_bcmserv thread err: (%pthjo_err/%d)"
0x1001000000000497 "SWITCHD_CMD_BCMSERV: cmd_bcmserv thread restarting. Exit err: (%pthjo_err/%d)"
0x1001000000000498 "SWITCHD_CONFD: ConfD error signalled: attempting ConfD recconnect"
0x1001000000000499 "SWITCHD_CONFD: Error publishing operdata: attempting ConfD reconnect"
0x1001000000000501 "SWITCHD_BS_ING2EGR: configuring an ingress to egress limit for (%portrole_st/%s)"
0x1001000000000502 "BCM56XXD error: Adding trunk to vlan failed(%sc_ifname/%s) (%vname/%s)"
0x1001000000000503 "BCM56XXD error: Deleting trunk from vlan failed(%sc_ifname/%s) (%vname/%s)"
0x1001000000000505 "SWITCHD_PTHREAD: (%op/%s) failed for (%mutex/%s)"
0x1001000000000506 "SWITCHD_PTHREAD: (%op/%s) failed for (%thread/%s")"
0x1001000000000507 "SWITCHD_MGMTPORT: Unable to set MGMT port enabled status. (%bcm_errmsg/%s) (%ifname/%s)"
0x1001000000000508 "SWITCHD_MGMTPORT: Unable to get MGMT port enabled status. (%bcm_errmsg/%s) (%ifname/%s)"
0x1001000000000509 "SWITCHD_PORTENABLE: Port is not a management port. Not enabling or disabling. (%ifname/%s)"
0x1001000000000510 "SWITCHD_PTHREAD: pthread api (%api/%s) failed"
0x1001000000000511 "SWITCHD_F5ZMQ: Bad packet (%packlen/%d) <= 0"
0x1001000000000512 "SWITCHD_F5ZMQ: Failed to send data from (%zmq_addr/%s)"
0x1001000000000513 "SWITCHD_F5ZMQ: failed to register (%type/%d) (%path/%s)"
0x1001000000000514 "SWITCHD_F5ZMQ: failed to register (%type/%x)"
0x1001000000000515 "SWITCHD_F5ZMQ: Failed to find float ip"
0x1001000000000516 "SWITCHD_F5ZMQ: Invalid zmq message registration"
0x1001000000000517 "SWITCHD_CMDSERV: Error (%err/%d) setting up cmdserv IO redirection"
0x1001000000000518 "SWITCHD_CMDSERV: Error configuring accept socket"
0x1001000000000519 "(%info/%s)"
0x1001000000000520 "(%notc/%s)"
0x1001000000000521 "(%warn/%s)"
0x1001000000000522 "(%err/%s)"
0x1001000000000523 "(%info/%s)"
0x1001000000000524 "(%notc/%s)"
0x1001000000000525 "(%warn/%s)"
0x1001000000000526 "(%err/%s)"
0x1001000000000527 "SWITCHD_F5ZMQ: (%err/%s)"
0x1001000000000528 "SWITCHD_BCM: Enabling controlplane rate limiting unit(%unit/%d) mcast(%mc/%d) bcast(%dlf/%d) dlf(%bcast/%d)"
0x1001000000000529 "SWITCHD_CVEVT: Shutdown signal received."
0x1001000000000530 "SWITCHD_SHUTDOWN: Switchd exiting now."
0x1001000000000531 "Error setting phy control (%unit/%d) (%port/%d) (%param/%d) (%errmsg/%s)"
0x1101000000000001 "pthread_create[config] %m"
0x1101000000000002 "pthread_create[op_data] %m"
0x1101000000000004 "unexpected tag: ; path: (%tag/%d) (%path/%s)"
0x1101000000000006 "not found: \'\' (%partition_name/%s)"
0x1101000000000007 "unknown tag: (%tag/%u)"
0x1101000000000009 "confd_register_trans_cb failed "
0x1101000000000010 "confd_register_range_data_cb failed "
0x1101000000000012 "pthread_mutex_lock %m"
0x1101000000000013 "pthread_mutex_unlock %m"
0x1101000000000015 "clock_gettime() %m"
0x1101000000000016 "get_blade_power_array() failed for 100 seconds "
0x1101000000000017 "out of space in buffer; unable to update partition list"
0x1101000000000018 "partition ; unable to look up iso version string (%partitions_part_name/%s)"
0x1101000000000019 "unable to look up iso[] (%partitions_part_iso_version/%s)"
0x1101000000000020 "Missing os version in iso[] (%partitions_part_iso_version/%s)"
0x1101000000000021 "Missing service version in iso[] (%partitions_part_iso_version/%s)"
0x1101000000000022 "Error opening pipe for partition status check %m"
0x1101000000000023 "Missing newline reading pipe for partition status check "
0x1101000000000024 "fopen: /var/log_controller/partition-software-manager-hal %m"
0x1101000000000025 "hal_init() failed "
0x1101000000000026 "Unable to look up local CC slot number from HAL..retrying "
0x1101000000000027 "invalid slot #: (%slot_num/%u)"
0x1101000000000029 "confd_load_schemas failed[]...sleeping (%inet_ntoa_odtaaddrsin_addr/%s)"
0x1101000000000030 "pthread_mutex_init[config] %m"
0x1101000000000031 "pthread_cond_init[config] %m"
0x1101000000000032 "pthread_mutex_init[op data] %m"
0x1101000000000033 "Unable to start ConfD CFG thread. "
0x1101000000000035 "unable to allocate partition_iso_image "
0x1101000000000037 "out of memory"
0x1101000000000038 "popen: "
0x1101000000000039 "missing newline in 'list ' response (%api_obj_name/%s)"
0x1101000000000040 "missing output from \'(%cmd/%s)\' command (%api_obj_name/%s) (%sv_sw_vers_name/%s)"
0x1101000000000041 "unexpected output from \'status \' API: (%api_obj_name/%s) (%sv_sw_vers_name/%s) (%buffer/%s)"
0x1101000000000042 "out of memory allocating cp_data "
0x1101000000000043 "out of memory allocating cp_data lists "
0x1101000000000044 "out of memory linking partition data "
0x1101000000000052 "unknown class_tag: (%field_tag/%d)"
0x1101000000000055 "unknown field_tag: (%field_tag/%d)"
0x1101000000000057 "confd_register_data_cb failed "
0x1101000000000058 "partition ; missing OS version (%partitions_part_name/%s)"
0x1101000000000059 "partition ; missing service version (%partitions_part_name/%s)"
0x1101000000000060 "unexpected output from \'sync_status \' API: (%api_obj_name/%s) (%sv_sw_vers_name/%s) (%buffer/%s)"
0x1101000000000062 "Partition services failed to start (%partitions_part_name/%s) (%sv_sw_vers_name/%s) (%slot_num/%u)"
0x1101000000000065 "Partition services install failed, rolling back (%partitions_part_name/%s) (%sv_sw_vers_name/%s) (%slot_num/%u)"
0x1101000000000066 "Partition services install failed (%partitions_part_name/%s) (%sv_sw_vers_name/%s)"
0x1101000000000067 "failed to start CDB_OPERATIONAL data session => (%confd_strerror_confd_errno/%s)"
0x1101000000000068 "failed to set cdb name space => (%confd_strerror_confd_errno/%s)"
0x1101000000000069 "cdb_set_values failed => (%confd_strerror_confd_errno/%s)"
0x1101000000000070 "Error cdb_set_namespace (%confdstrerr/%s) (%confdlasterr/%s)"
0x1301000000000002 "Adding remote server (%host/%s)"
0x1301000000000003 "Removing remote server (%host/%s)"
0x1301000000000004 "rsyslog.conf operation failed. (%path/%s) (%msg/%s)"
0x1301000000000005 "Setting component log severity (%name/%s) (%severity/%d)"
0x1301000000000008 "File I/O operation failed (%path/%s)"
0x1301000000000009 "Initialization error (%component/%s)"
0x1301000000000010 "Remote logging destinations modified (%mode/%s)"
0x1301000000000013 "Hostlogs fwdconfig update (%remote/%s) (%fwdon/%s)"
0x1301000000000015 "Database operation error: (%op/%s) (%errorstr/%s)"
0x1301000000000016 "Hostlogs forwarding to active for this node changed (%state/%s)"
0x1301000000000017 "Missing slot identifier in environment"
0x1301000000000018 "Clearing host logs forwarding configuration for this node"
0x1301000000000021 "Internal config handler error (%issue/%s) (%severity/%s)"
0x1301000000000022 "Rsyslog configure daemon starting. (%version/%s) (%date/%s)"
0x1301000000000023 "Setting component's log severity (%list/%s)"
0x1301000000000024 "Remote logging selector modified (%dst/%s) (%facility/%s) (%severity/%s)"
0x181000000000001 "HAL ZMQ Input Message Router - Not configured"
0x181000000000002 "Service Starting" version=%s
0x1901000000000001 "Dagd service starting. (%version/%s) (%build_date/%s)"
0x1901000000000002 "Dagd service exiting."
0x1901000000000003 "New connection. (%remote_addr/%s)"
0x1901000000000006 "Dagd connection EOF. (%remote_addr/%s)"
0x1901000000000007 "Dagd connection error. (%remote_addr/%s) (%code/%d) (%message/%s)"
0x1901000000000008 "Error creating a commit reply message. (%error_code/%d)"
0x1901000000000009 "Received commit reply, but no commit request found."
0x1901000000000011 "Error processing a sdag message. (%msg_type/%d) (%error_code/%d)"
0x1901000000000015 "cdb_get: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x1901000000000016 "cdb_cd: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x1901000000000017 "Couldn't write DagState for tenant (%tenant_name/%s) (%message/%s)"
0x1901000000000019 "Couldn't bulk write DagState for tenant (%tenant_name/%s) (%confd_errno/%d) (%confd_errstr/%s)"
0x1901000000000020 "Tenant Disconnect (%remote_addr/%s)"
0x1901000000000022 "Dagd ZMQ Server starting."
0x1901000000000023 "Dagd ZMQ Server received empty message."
0x1901000000000024 "Dagd Tmstat error on table (%field/%s) (%table_name/%s): (%text/%s)"
0x1901000000000025 "Dagd ZMQ Server exiting."
0x1901000000000026 "Dagd ZMQ Server error: (%error_message/%s) (%endpoint/%s)"
0x1901000000000027 "Dagd ZMQ Server error: (%error_message/%s) (%endpoint/%s) (%error/%d)"
0x1901000000000028 "Dagd ZMQ Server error: (%error_message/%s) (%endpoint/%s) (%error/%d)"
0x1901000000000029 "Dagd ZMQ server req message: (%error_message/%s)."
0x1901000000000030 "(%error_message/%s) (%error/%d)"
0x1901000000000031 "Dagd handler error: (%error_message/%s)."
0x1901000000000032 "Dadg tenant stat table row update error:(%field/%d) (%error_message/%s)."
0x1901000000000033 "Dagd published DAG state: (%tenant_name/%s) (%table_type/%s) (%sdag_table_hash/%u)."
0x1c1000000000001 "HAL failed to write platform file" file=%s
0x1c1000000000002 "Service Starting" version=%s
0x1d81000000000001 "Initializing 'tmstat' library"
0x1d81000000000002 "Stats Collector - Starting" version=%v
0x1d81000000000003 "Stats Collector - Shutting Down"
0x1f01000000000001 "audit-service starting (%version/%s) (%log/%s) (%date/%s)"
0x1f01000000000002 "audit-service exiting."
0x1f02000000000001 "Could not write database (%OBJECT/%s) (%ERR/%s)"
0x1f02000000000002 "Could not delete user success login instance. (%user/%s) (%ERR/%s)"
0x1f03000000000001 "audit (%user/%s) (%cmd/%s)"
0x1f03000000000002 "audit (%user/%s) (%cmd/%s)"
0x1f03000000000003 "audit create (%ctx/%s) (%user/%s) (%path/%s)"
0x1f03000000000004 "audit delete (%ctx/%s) (%user/%s) (%path/%s)"
0x1f03000000000005 "audit modify (%ctx/%s) (%user/%s) (%path/%s)"
0x1f03000000000006 "audit value set (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)"
0x1f03000000000007 "audit move first (%ctx/%s) (%user/%s) (%path/%s)"
0x1f03000000000008 "audit move after (%ctx/%s) (%user/%s) (%path/%s)"
0x1f03000000000009 "audit delete attr (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)"
0x1f03000000000010 "audit set attr (%ctx/%s) (%user/%s) (%path/%s) (%value/%s)"
0x2001000000000001 "Image Agent Starting"
0x2001000000000002 "Image Agent Exiting"
0x2002000000000001 "Could not start DB session (%ERR/%s)"
0x2002000000000002 "Could not end DB session (%ERR/%s)"
0x2002000000000003 "Could not access DB (%IMAGE/%s) (%ERR/%s)"
0x2002000000000004 "Could not create DB entry (%IMAGE/%s) (%ERR/%s)"
0x2002000000000005 "Could not delete DB entry (%IMAGE/%s) (%ERR/%s)"
0x2002000000000006 "Could not read DB (%IMAGE/%s) (%FIELD/%s) (%ERR/%s)"
0x2002000000000007 "Could not write DB (%IMAGE/%s) (%FIELD/%s) (%ERR/%s)"
0x2002000000000009 "Could not create image processing directory (%IMAGE/%s)"
0x2002000000000010 "Could not verify image signature. Removed. (%IMAGE/%s) (%FAILURE/%s)"
0x2002000000000011 "Image file transfer started (%IMAGE/%s)"
0x2002000000000012 "Image file transfer completed (%IMAGE/%s)"
0x2002000000000013 "Image file transfer interrupted (%IMAGE/%s)"
0x2002000000000014 "Image file transfer failed (%IMAGE/%s)"
0x2002000000000015 "Image file signature verified (%IMAGE/%s)"
0x2002000000000016 "Image file processing started (%IMAGE/%s)"
0x2002000000000017 "Image file processing failed (%IMAGE/%s) (%REASON/%s)"
0x2002000000000018 "Image file processing completed (%IMAGE/%s)"
0x2002000000000019 "Invalid IMAGES file removed (%FILE/%s)"
0x2002000000000020 "Invalid SPEC file removed (%FILE/%s)"
0x2002000000000021 "Cannot identify file type. Removing. (%FILE/%s)"
0x2002000000000022 "Invalid file extension. Removing. (%FILE/%s)"
0x2003000000000001 "Image file added (%FILE/%s)"
0x2003000000000002 "Image file removed (%FILE/%s)"
0x2003000000000003 "Image file replicated (%FILE/%s)"
0x2003000000000004 "Image file not replicated (%FILE/%s)"
0x2003000000000005 "Image file replica deleted (%FILE/%s)"
0x2003000000000006 "Image file replica not deleted (%FILE/%s)"
0x2003000000000007 "Image file identified (%FILE/%s) (%TYPE/%s)"
0x2004000000000001 "Could not create maapi transaction (%ERR/%s)"
0x2004000000000002 "Invalid image type (%IMAGE/%s)"
0x2004000000000004 "Operation unsuccessful (%FAILURE/%s)"
0x2005000000000001 "Could not read if image is in use (%IMAGE/%s) (%ERR/%s)"
0x2005000000000002 "Could not write inuse flag (%OPERATION/%s) (%IMAGE/%s) (%ERR/%s)"
0x2005000000000003 "Could not read tenant name (%ERR/%s)"
0x2005000000000004 "Could not read tenant field (%TENANT/%s) (%FIELD/%s) (%ERR/%s)"
0x2005000000000005 "Image does not exist in DB (%IMAGE/%s)"
0x2005000000000006 "Startup or Failover event received (%MSG/%s)"
0x2010000000000001 "L2Agent starting (%version/%s) (%date/%s) (%slotid/%u) (%role/%s) (%platform/%s)"
0x2010000000000002 "BaseMac info not available. Exiting ..."
0x2010000000000003 "Internal subnet (%SUBNET/%s)"
0x2010000000000004 "Detected FPGAMGR restart (%slotid/%u). Exiting..."
0x2010000000000006 "WAITING FOR PORTGROUP DATA......"
0x2010000000000007 "RECEIVED PORTGROUP DATA......"
0x2010000000000008 "WAITING FOR INTERFACE DATA......"
0x2010000000000009 "RECEIVED INTERFACE DATA......"
0x2010000000000010 "PG data different - publish portgroups"
0x2010000000000011 "PG data matches - do not publish"
0x2010000000000012 "Interface data different - publish interfaces"
0x2010000000000013 "Interface config data matches - do not publish"
0x2010000000000016 "Empty base Mac"
0x2010000000000017 "sending reboot failed for blade (%BLADE/%d) (%ERRNOSTR/%s) (%RC/%d)"
0x2010000000000018 "cannot create reboot socket (%ERRNOSTR/%s)"
0x2010000000000019 "cannot connect to reboot socket (%ERRNOSTR/%s)"
0x2010000000000020 "reboot sent ok for blade (%BLADE/%d)"
0x2010000000000021 "Interface oper data publish"
0x2010000000000022 "Unrecognized platform type (%PLATFORM/%s). Exiting..."
0x2010000000000023 "(%test/%s)"
0x2010000000000024 "WAITING FOR IPIPELINE DATA......"
0x2010000000000025 "RECEIVED PIPELINE DATA......"
0x2010000000000026 "Pipeline data different - publish pipelines"
0x2010000000000027 "Pipeline data matches - do not publish"
0x2010000000000028 "l2_agent published pipelines after retries count (%COUNT/%d)"
0x2010000000000029 "l2_agent published port-speed for interfaces after retries count (%COUNT/%d)"
0x2010000000000030 "NIC_MGR_ZMQ_ADDR env_var not found. Exiting ..."
0x2010000000000031 "l2_agent found port profile (%PROFILE/%d)"
0x2010000000000032 "l2_agent changed the port profile (%FROMPROFILE/%s) (%TOPROFILE/%s)"
0x2010000000000033 "l2_agent failed changing port profile (%PROFILE/%d) (%ERRNOSTR/%s)"
0x2010000000000034 "l2_agent port profile change started reboot (%PROFILE/%d)"
0x2010000000000035 "l2_agent failed port-profile reboot (%ERRNOSTR/%s)"
0x2010000000000037 "Read hardware port-profile (%PROFILE/%s) (%RETRYCOUNT/%d)"
0x2010000000000038 "Cannot find the config entry for virtual-network (%VNET/%s)"
0x2010000000000039 "Cannot find the config entry for virtual-wire (%VWIRE/%s)"
0x2010000000000040 "AUDIT - SERVICE_INDICATOR initializing L2-agent in FIPS 140-3 mode"
0x2020000000000001 "failed to create maapi transaction with config daemon (%ERRNOSTR/%s) (%LASTERR/%s)"
0x2020000000000002 "maapi_get failed for (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2020000000000003 "failed to complete maapi transaction (%ERRNOSTR/%s) (%LASTERR/%s)"
0x2020000000000004 "maapi_get failed for (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2020000000000005 "maapi_get failed for (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2020000000000006 "failed to create session for oper data update (%ERRNOSTR/%s) (%LASTERR/%s)"
0x2030000000000001 "maapi_set failed for portgroup (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%d)"
0x2030000000000002 "maapi_create failed for portgroup (%PORTGROUP/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000003 "maapi_set failed for interface (%INTERFACE/%s) (%ATTRIBUTE/%s) (%PATH/%s) (%LASTERR/%s) (%ERRNOSTR/%d)"
0x2030000000000004 "maapi_create failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000006 "maapi_create failed for vlan (%VID/%d) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000007 "maapi_delete failed for portgroup (%PORTGROUP/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000008 "maapi_delete failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000009 "mac entry (%ENTRY/%s) not found"
0x2030000000000010 "maapi_delete failed for static fdb entry interface field (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000012 "cdb_get failed to get mac for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000013 "cdb_get failed to get vlan for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000014 "cdb_get failed to get tag-type for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000015 "maapi_delete failed for lldp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000016 "maapi_delete failed for stp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000017 "maapi_delete failed for mstp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000018 "maapi_delete failed for rstp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000019 "maapi_delete failed for lacp interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000020 "maapi_delete failed for qos interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000021 "maapi_create failed for vlan (%VID/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000022 "maapi_create failed for port-mapping (%PORTMAP/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000023 "maapi_create failed for port-mapping (%PORTMAP/%s) pipeline (%PIPELINE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000024 "maapi_set failed for port-mapping (%PORTMAP/%s) pipeline (%PIPELINE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000025 "maapi_delete failed for state port-speed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000026 "maapi_delete failed for node (%NODE/%s) state (%STATE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000027 "NDIs exhausted..."
0x2030000000000028 "maapi_get failed for virtual-network ndi-id (%VNET/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000029 "maapi_set failed for virtual-network ndi-id (%VNET/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2030000000000030 "config-restore overwrite of stale ndi-id for virtual-network ndi-id (%VNET/%s) (%NDI/%d)"
0x2030000000000031 "virtual-network (%VNET/%s) cannot be configured because system reached the max number (%MAX/%d) of supported virtual-networks"
0x2030000000000032 "maapi_get failed to read virtual-networks for virtual-wire (%VWIRE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2040000000000001 "fpgaclient failed to register endpoint (%EPTYPE/%d) (%PATH/%s)"
0x2040000000000002 "fpgaclient failed to deregister endpoint (%PATH/%s)"
0x2040000000000003 "fpgamgr portgroups do not match the running config portgroups - restart FPGAMGR"
0x2040000000000004 "fpgaclient expect non null payload"
0x2040000000000005 "fpgaclient failed to send to ZMQ endpoint address (%ZMQADDRESS/%s))"
0x2040000000000006 "fpgaclient got no response from FPGAD - timeout"
0x2040000000000007 "Interface (%INTERFACE/%s) data differ; config: slotid (%CSLOT/%d), speed (%CSPEED/%d), fpga: slotid (%FSLOT/%d), speed (%FSPEED/%d). Exiting..."
0x2040000000000008 "PG (%PORTGROUP/%s) data differ; config: mode (%CMODE/%d) slotid (%CSLOT/%d), fpga: mode (%FMODE/%d) slotid (%FSLOT/%d). Exiting..."
0x2040000000000009 "fpgaclient failed to read alertfd"
0x2040000000000010 "fpgaclient received interface (%INTERFACE/%s) data: Port (%PORT/%d) PortIdx (%PORTIDX/%d) Speed (%SPEED/%s)"
0x2040000000000012 "MAC exhaustion for interface (%INTERFACE/%s). Exiting..."
0x2040000000000013 "Interface (%INTERFACE/%s) does not exist in the ifmap. Exiting..."
0x2040000000000014 "Update phyport for interface (%INTERFACE/%s): old (%OLDPORT/%d), new (%NEWPORT/%d)."
0x2040000000000015 "fpgaclient received portgroup (%NAME/%s) data: Idx (%PGINDEX/%d) Mode (%PGMODE/%s)"
0x2040000000000016 "PG (%PORTGROUP/%s) does not exist in the pgmap. Exiting..."
0x2040000000000017 "cdb_get failed to get interface name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2040000000000018 "interface (%INTERFACE/%s) not in map, when map not empty. Insert it"
0x2040000000000019 "pipeline (%PIPELINE/%s) pipeline-group (%PIPELINEGRP/%s) differs from fpga-pipeline-group (%FPGAPIPELINEGRP/%s)"
0x2040000000000020 "pipeline (%PIPELINE/%s) not found in hardcoded map"
0x2040000000000021 "Update speed for interface (%INTERFACE/%s): old (%OLDSPED/%s), new (%NEWSPEED/%s)."
0x2040000000000022 "fpgaclient received interface (%INTERFACE/%s) data: Port-DUD (%PORT/%d) Portgroup-Idx (%PGIDX/%d) PipelineGroup (%PipelineGroup/%s) Speed (%SPEED/%s)"
0x2040000000000023 "fpgaclient received pipeline (%PIPELINE/%s) data: PipelineGroup (%PIPELINEGROUP/%s)"
0x2040000000000024 "No hwmac received for interface (%INTERFACE/%s)."
0x2050000000000001 "cdb_get failed for PORTGROUP name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000002 "cdb_cd failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000003 "cdb_get failed for (%PORTGROUP/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000004 "unknown operation (%OP/%d)"
0x2050000000000006 "cdb_set_values failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000007 "cdb_get failed for interface (%INTERFACE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000008 "cdb_get failed for mac entry (%ENTRY/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000009 "cdb_get failed to get chassis-base-mac for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000011 "cdb_get failed to get node data (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000012 "unknown operation (%OP/%d)"
0x2050000000000013 "reconstruct mac alloc pool - cdb_get failed to get interface (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000014 "cdb_set_values failed for virtual-network state (%VNET/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000015 "cdb_get_values failed for virtual-network (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000016 "cdb_set_values failed for virtual-wire state (%VWIRE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000017 "cdb_get_values failed for virtual-wire (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2050000000000018 "initial value of fec for interface (%INTERFACE/%s) (%VAL/%d)"
0x2050000000000019 "value for fec has been updated for interface (%INTERFACE/%s) (%OLDV/%d) (%NEWV/%d)"
0x2060000000000001 "maapi_set_elem failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d))"
0x2060000000000002 "maapi_set_elem failed for (%LEAF/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d))"
0x2080000000000001 "Failed to send completion reply for component (%COMPONENT/%s)"
0x2101000000000001 "Failed to connect confd's control socket."
0x2101000000000002 "Failed to initialize SNMP Trap daemon."
0x2101000000000003 "confd_register_snmp_notification is failed."
0x2101000000000004 "Failed to create socket."
0x2101000000000005 "Failed sending (%name/%s) trap to CONFD."
0x2101000000000006 "(%PHASE/%s) Retrying Forever."
0x2101000000000007 "SNMP Trap Service Starting...(%version/%s) (%date/%s)."
0x2101000000000008 "SNMP Trap Service Exiting... (%version/%s) (%date/%s)."
0x2101000000000009 "SNMP Trap can't be processed on Subsidary Controller."
0x2101000000000010 "Trap Name is missing in the Request."
0x2101000000000011 "cdb_get failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)."
0x2101000000000012 "cdb_get_values failed with (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)."
0x2101000000000013 "Caught Exception (%exception/%s)."
0x2101000000000014 "Caught unknown Exception."
0x2101000000000015 "Invalid op value (%op/%d)."
0x2201000000000001 "Alert Service starting. (%version/%s) (%date/%s)"
0x2201000000000002 "Alert Service exiting."
0x2201000000000003 "(%func/%s)Alert Service unable to initialize ZMQ"
0x2201000000000004 "Failed to register endpoint (%endpoint/%s)"
0x2201000000000005 "Failed to deregister endpoint (%endpoint/%s)"
0x2201000000000006 "ZMQ Message Server Started. Listening on alert port (%port/%d)"
0x2201000000000007 "(%func/%s)Unable to create Alert entry in CDB. (%keypath/%s) (%confd_err/%s) (%confd_errno/%d)"
0x2201000000000008 "Unable to delete Alert entry (%keypath/%s) from CDB"
0x2201000000000009 "(%func/%s): (%pointer/%s) is NULL)"
0x2201000000000010 "(%func/%s) Controller State is not Active or Standby. State = (%state/%s)"
0x2201000000000011 "(%func/%s) Alert source is empty."
0x2201000000000012 "(%func/%s) Unable to clear Alert {(%alm_id/%s) (%resource/%s)}"
0x2201000000000013 "(%func/%s) confd_errstr (%errstr/%s), confd_errno: (%errno/%d)"
0x2201000000000014 "(%func/%s) Unable to end confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2201000000000016 "(%func/%s)Failed to get protobuf size."
0x2201000000000017 "(%func/%s)ZMQ failed to allocate message length. (%msg_len/%d)"
0x2201000000000018 "(%func/%s)Failed to send reply (%endpoint/%s)"
0x2201000000000019 "(%func/%s)cdb_get failed. (%KEYPATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x2201000000000020 "(%func/%s)Unknown Alarm Yang Severity. (%yangSeverity/%d)"
0x2201000000000021 "(%func/%s)Sending (%ACTION/%s). (%severity/%d) (%dest/%s)"
0x2201000000000022 "(%func/%s)Sending POST_LOP_OBJECT_LED_STATUS_RESET (%dest/%s)"
0x2201000000000023 "(%func/%s)Failed to get protobuf size."
0x2201000000000024 "(%func/%s)ConfD is not ready."
0x2201000000000025 "(%func/%s)zmq poll item list is NULL."
0x2201000000000026 "(%func/%s) (%ALERT_ID/%s) "
0x2201000000000027 "Received alert assert. (%alert/%s)"
0x2201000000000028 "Received alert clear. (%alert/%s)"
0x2201000000000029 "Received event. (%event/%s)"
0x2201000000000030 "ZMQ pull payload is null."
0x2201000000000031 "Failed to create (%PATH/%s)"
0x2201000000000032 "Failed to push ZMQ message."
0x2201000000000034 "Unable to remove events file (%FILE/%s)."
0x2201000000000035 "Failed to send ZMQ message."
0x2201000000000036 "Failed to add ZMQ payload message."
0x2301000000000001 "---===[ Partition-agent Starting ]===--- (%Version/%s) (%Date/%s)"
0x2301000000000002 "---===[ Partition-agent Exiting ]===--- (%Version/%s) (%Date/%s)"
0x2301000000000003 "---===[ Partition-agent Exiting ]===--- Unable to start thread (%threadname/%s)"
0x2301000000000004 "Internal error, partition name not found. (%partition_name/%s)"
0x2301000000000011 "Failed to create join thread (%threadname/%s)"
0x2301000000000012 "Request for slot number returned (%slot_number/%d)"
0x2301000000000014 "Notification of chassis basemac change ignored, already have basemac: (%BaseMAC/%s)"
0x2301000000000015 "Reply to partition (%partitionId/%d) request for base MAC (%BaseMAC/%s)"
0x2301000000000016 "Partition has no MAC addresses assigned (%partitionId/%d) (%active/%d)"
0x2301000000000017 "Partition has MAC addresses assigned: (%partitionId/%d) (%active/%d) (%macCount/%u)"
0x2301000000000018 "Partition offset/count list (%partitionId/%d) (%active/%d) (%entries/%s)"
0x2301000000000019 "Floating IP is not present for enabled partition; do not change controller state (%partitionName/%s)"
0x2301000000000022 "Partition has blocks of MAC addresses allocated and cannot be downgraded (%partitionId/%d) (%version/%s)"
0x2301000000000023 "Partition service version cannot be parsed (%partitionId/%d) (%version/%s)"
0x2301000000000024 "Partition service version verified for block MAC support (%partitionId/%d) (%version/%s) (%first_no/%d) (%second_no/%d)"
0x2301000000000025 "Partition UUID verification shows stale partition data, remove op data for partition: (%partitionId/%d)"
0x2301000000000027 "Partition uuid not known (%partitionId/%d)"
0x2302000000000001 "cdb_set failed setting oper data (%operdatapath/%s) (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000002 "Failed to publish (%property/%s) (%value/%s)"
0x2302000000000003 "Failed to obtain confd socket to publish operational data"
0x2302000000000004 "Partition agent could not establish confd connection to publish operational data"
0x2302000000000005 "Unable to set path to publish operational data (%path/%s)"
0x2302000000000006 "Failed to create component (%component/%s)(%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000007 "Failed to set cdb path (%path/%s) (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000008 "Failed to start cdb platform_session (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000009 "Failed to close cdb platform_session (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000010 "Failed to delete component (%component/%s)(%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000011 "Load_schemas failed - retrying (%addr/%s) (%confdlasterr/%s)"
0x2302000000000012 "cdb_get failed for getting oper data (%func/%s)(%operdatapath/%s) (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000013 LOG_INFO "connected to ConfD for callpoint operation data "
0x2302000000000014 "confd_register_trans_cb failed (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000015 "confd_register_range_data_cb failed (%confderrno/%d) (%confdlasterr/%s)"
0x2302000000000016 "unexpected confd tag or path. (%tag/%d) (%path/%s)"
0x2302000000000017 "unknown confd tag. (%tag/%u)"
0x2302000000000018 "connected to ConfD for callpoint operation data "
0x2302000000000019 "out of memory allocating cp_data "
0x2302000000000020 "out of memory allocating cp_data lists "
0x2302000000000021 "Error opening pipe for partition status check"
0x2302000000000023 "Missing newline reading pipe for partition status check "
0x2302000000000024 "Unable to start cdb session to read partition_macs - retrying (%confderr/%s)"
0x2303000000000001 "Unable to obtain valid slot count (%slotcount/%d)"
0x2303000000000002 "Unable to obtain chassis base MAC, no MACs can be allocated until base MAC available"
0x2303000000000003 "Using chassis base MAC (%mac/%s)"
0x2303000000000004 "Error restoring MAC allocation from partition_macs database entries (%mac/%s)"
0x2303000000000005 "MAC reclaim from partition not found. (%partitionId/%d) (%offset/%d)"
0x2303000000000006 "Standby Chassis Controller will not reclaim MACs. (%partitionId/%d)"
0x2303000000000007 "Standby Chassis Controller ignores requests to allocate MACs."
0x2303000000000008 "Socket error, unable to use sw-mgmt socket to reboot slot. (%slot/%d)"
0x2303000000000009 "Rebooting slot(%slot/%d)"
0x2303000000000010 "Failed to write slot reboot request to sw-mgmt socket. (%slot/%d)"
0x2303000000000011 "HAL initialization failed, process exiting"
0x2303000000000012 "Unable to look up local CC slot number from HAL..retrying\n"
0x2303000000000013 "Socket error, unable to use sw-mgmt socket to issue partition upgrade API command"
0x2303000000000014 "Failed to write partition upgrade API command to sw-mgmt socket."
0x2303000000000015 "Failed to read result of partition upgrade API command from sw-mgmt socket."
0x2303000000000016 "Error exit (%reason/%s)"
0x2303000000000017 "Error Converting macString to mac_addr (%macstring/%s)"
0x2303000000000018 "Error MAC free pool already empty when trying to remove mac (%mac/%s)"
0x2303000000000019 "Error duplicate MAC not in free pool, already allocated (%mac/%s)"
0x2303000000000020 "Error MAC and offset from basemac inconsistent (%offset/%d) (%mac/%s) "
0x2303000000000021 "MAC reclaim request sent to partition (%partitionId/%d)"
0x2303000000000022 "MAC reclaim reply from partition (%partitionId/%d) (%macsreclaimed/%d)"
0x2303000000000023 "Partition allocated MACs not found. (%partitionId/%d)"
0x2303000000000024 "Error MAC and offset from basemac not from this pool (%offset/%d) (%mac/%s)"
0x2303000000000025 "Hello message from partition (%partitionId/%d)"
0x2303000000000026 "Standby Chassis Controller ignores HELLO"
0x2303000000000027 "Slot reboot request failed(%SLOT/%d)"
0x2303000000000028 "Slot reboot request succeeded(%SLOT/%d)"
0x2304000000000001 "Partition-agent error (%errormsg/%s)"
0x2304000000000002 "Unable to initialize ZMQ. (%error/%d)"
0x2304000000000003 "ZMQ Message Server Started. Listening on (%hipri/%d) (%lowpri/%d)"
0x2304000000000004 "Failed to register endpoint (%endpoint/%s)"
0x2304000000000005 "Failed to deregister endpoint (%endpoint/%s)"
0x2304000000000006 "Failed to send reply (%endpoint/%s)"
0x2304000000000007 "Failed to get zmq handle to socket"
0x2304000000000008 "Unable to start ZMQ server thread (%error/%d)"
0x2304000000000009 "Invalid zmq payload count (%count/%d)"
0x2304000000000010 "Failed to create zmq_socket"
0x2304000000000011 "Failed to allocate MAC block of size (%size/%s) for partition (%partitionId/%d)"
0x2304000000000012 "received NULL message (%function/%s)"
0x2304000000000013 "received NULL payload in ZMQ message (%function/%s)"
0x2304000000000014 "Number of envelopes for partition list (%envelopes/%d) (%active/%d) (%partitionList/%s)"
0x2305000000000001 "Management port link state up"
0x2305000000000002 "Management port link state down"
0x2305000000000003 "Controller is now Healthy"
0x2305000000000004 "Controller is now Unhealthy"
0x2305000000000005 "Controller component is Unhealthy (%component/%s)"
0x2305000000000010 "Changing failover state from:(%current_state/%s) to (%new_state/%s)"
0x241000000000001 "DIAG ZMQ Input Message Router - Not configured"
0x241000000000002 "Service Starting" version=%s
0x2701000000000001 "unexpected tag: (%tag/%d)"
0x2701000000000002 "confd_register_trans_cb failed "
0x2701000000000003 "confd_register_range_data_cb failed "
0x2701000000000004 "pthread_create[(%type_str/%s)] (%errstr/%s)"
0x2701000000000005 "pthread_mutex_lock[(%type_str/%s)] (%errstr/%s)"
0x2701000000000006 "pthread_mutex_unlock[(%type_str/%s)] (%errstr/%s)"
0x2701000000000007 "error lookup up user from environment "
0x2701000000000008 "user name \'\' too long (> ) (%username_local/%s) (%usernamelen/%u)"
0x2701000000000009 "error lookup up user in password db "
0x2701000000000010 "error generating group name for partition \'\' (%cc_partition_i_name/%s)"
0x2701000000000011 "error looking up group \'\' in group db (%gr_partition_name/%s)"
0x2701000000000012 "error looking up group \'admin\' in group db "
0x2701000000000013 "error looking up group \'ts_admin\' in group db "
0x2701000000000014 "unexpected zero rc after poll() (%errstr/%s)"
0x2701000000000015 "set_user_to_host() (%rc/%d)"
0x2701000000000016 "back from loop; rc: (%rc/%d)"
0x2701000000000017 "fopen: : (%input_file/%s)"
0x2701000000000018 "fscanf: : (%input_file/%s)"
0x2701000000000019 "invalid slot #: (%local_cc_slot_number/%u)"
0x2701000000000020 "pthread_mutex_init[(%type_str/%s)] (%errstr/%s)"
0x2701000000000021 "pthread_cond_init[(%type_str/%s)] (%errstr/%s)"
0x2701000000000022 "confd_load_schemas failed[]...sleeping (%inet_ntoa_odtaaddrsin_addr/%s)"
0x2701000000000023 "Unable to start (%type_str/%s) thread. "
0x2701000000000024 "User does not have permission to access slot (%slot/%u)"
0x281000000000001 "DIAG ZMQ Input Message Router - Not configured"
0x281000000000002 "Service Starting" version=%s
0x3001000000000001 "slot number out of range (%FUNCTION/%s) (%blade_slot/%d)"
0x3001000000000002 "calloc failed (%FUNCTION/%s)"
0x3001000000000004 "Not enough chassis power (%FUNCTION/%s) (%total_power/%f) (%total_power_required/%f)"
0x3001000000000005 "not enough power (%FUNCTION/%s)"
0x3001000000000006 "setrlimit(RLIMIT_CORE, RLIM_INFINITY) failed (%FUNCTION/%s)"
0x3001000000000007 "pthread_mutex_lock: (%strerror/%s) (%FUNCTION/%s)"
0x3001000000000009 "pthread_mutex_unlock: (%strerror/%s) (%FUNCTION/%s)"
0x3001000000000010 "pthread_create[power_manager]: (%strerror/%s) "
0x3001000000000013 "chassis_manager is done"
0x3001000000000014 "Failed to parse firmware items"
0x3001000000000015 "Failed to parse update status msg."
0x3001000000000016 "Failed to parse cpu response."
0x3001000000000017 "Failed to parse drive response."
0x3001000000000018 "Failed to parse platform power cycle response."
0x3001000000000019 "system_power_cycle: The chassis controller will be power cycled!"
0x3001000000000020 "system_reboot: Reboot the chassis controller! "
0x3001000000000021 "sendto error returns (%argv_0/%s) (%errno/%d)"
0x3001000000000022 "Failed to parse chassis platform response "
0x3001000000000023 "Failed to parse lcd seeprom response"
0x3001000000000024 "Failed to parse PEL entry response."
0x3001000000000025 "AFU after update action failed to restart."
0x3001000000000026 "pthread_create[config]: (%strerror/%s)"
0x3001000000000027 "pthread_mutex_init[config]: (%strerror/%s)"
0x3001000000000028 "pthread_cond_init[config]: (%strerror/%s)"
0x3001000000000029 "Unable to start ConfD CFG thread. "
0x3001000000000031 "pthread_create[afu_loop]: (%strerror/%s) "
0x301000000000002 "FWU failed to create the HAL connection"
0x301000000000004 "FWU timed out waiting for HAL to be ready" seconds=time.Duration
0x301000000000005 "FWU failed to create BIOS recovery image" error=error
0x301000000000006 "FWU Init failed to create ZMQ PUB" error=error
0x301000000000007 "FWU Init failed to start ZMQ PUB" error=error
0x301000000000008 "Service Starting" version=%s
0x303000000000001 "BMC SEL Write" event=%s eventDetail=%s
0x303000000000002 "LOP PEL Write" event=%s
0x303000000000004 "PCIe slot speed not expected, retrying" pcieSpeed=%s expected=%s actual=%s
0x3101000000000001 "pthread_create failed[config]: (%strerror/%s)"
0x3101000000000002 "pthread_mutex_lock failed: (%strerror/%s)"
0x3101000000000003 "pthread_mutex_unlock failed: (%strerror/%s)"
0x3101000000000004 "exceeded buffer space; delete vlan interface command is too long"
0x3101000000000005 "exceeded buffer space; modify ipv4 command is too long"
0x3101000000000006 "system command returns error (%host_cmd/%s) (%err/%d)"
0x3101000000000007 "exceeded buffer space; modify ipv4 gateway command is too long"
0x3101000000000008 "exceeded buffer space; modify ipv6 gateway command is too long"
0x3101000000000009 "exceeded buffer space; modify ipv6 command is too long"
0x3101000000000010 "exceeded buffer space; add macvlan interface command is too long"
0x3101000000000011 "exceeded buffer space; delete macvlan interface command is too long"
0x3101000000000012 "exceeded buffer space; bringup team port interface command is too long"
0x3101000000000013 " cmd failed error (%host_cmd/%s) (%rc/%d)"
0x3101000000000014 "docker container doesn't exist (%container_name/%s)"
0x3101000000000015 "exceeded buffer space; enable interface ipv4 dhcp command is too long"
0x3101000000000016 "exceeded buffer space; enable interface ipv6 dhcp command is too long"
0x3101000000000017 "inet_ntop: controller_address fail: (%strerror/%s)"
0x3101000000000018 "exceeded buffer space; disableinterface ipv4 dhcp command is too long"
0x3101000000000019 "exceeded buffer space; disable interface ipv6 dhcp command is too long"
0x3101000000000020 "inet_ntop: addr_float fail: (%strerror/%s)"
0x3101000000000021 "inet_ntop: addr_1 fail: (%strerror/%s)"
0x3101000000000022 "inet_ntop: addr_gateway fail: (%strerror/%s)"
0x3101000000000023 "Unknown Chassis host type: (%host_type/%s)"
0x3101000000000024 "exceeded buffer space; disconnect team vlan command is too long"
0x3101000000000025 "nsenter cmd failed (%nsenter_cmd/%s)"
0x3101000000000026 "cmd failed (%host_cmd/%s)"
0x3101000000000027 "exceeded buffer space; command is too long"
0x3101000000000028 "Invalid pid 0 for docker container (%container_name/%s)"
0x3101000000000029 "fopen failed: (%strerror/%s)"
0x3101000000000030 "hal_init failed: (%strerror/%s)"
0x3101000000000031 "pthread_mutex_init failed[config]: (%strerror/%s)"
0x3101000000000032 "pthread_cond_init failed[config]: (%strerror/%s)"
0x3101000000000033 "Unable to start ConfD CFG thread. "
0x3101000000000034 "hal_get_ha_active error: (%strerror/%s)"
0x3101000000000035 "usage argument failure (%argv/%s)"
0x3101000000000036 "failed to send address assignment packet to the LCD"
0x3101000000000037 "cdb_set failed setting oper data (%operdatapath/%s) (%confdstrerr/%s) (%confdlasterr/%s)"
0x3101000000000038 "Error cdb_start_session (%confdstrerr/%s) (%confdlasterr/%s)"
0x3101000000000039 "Error cdb_set_namespace (%confdstrerr/%s) (%confdlasterr/%s)"
0x3101000000000040 "Error cdb_cd (%dir/%s) (%confdstrerr/%s) (%confdlasterr/%s)"
0x3101000000000041 "Unable to start thread to publish chassis basemac. "
0x3101000000000042 "Failed wait on pthread conditional to publish chassis basemac (%strerr/%s)"
0x3101000000000043 "Failed to signal condition var to publish operdata (%strerr/%s)"
0x3101000000000044 "Timed out retrying op_data_cb_connect (%confdstrerr/%s) (%confdlasterr/%s)"
0x3101000000000045 "Unable to detach thread to publish chassis basemac. (%strerr/%s)"
0x3101000000000046 "open failed for (%op/%s): (%path/%s): (%err/%s)"
0x3101000000000047 "error (%op/%s): (%path/%s)"
0x3101000000000048 "Bad value (%val/%d): (%path/%s)...attempting to fix"
0x3101000000000049 "pthread_create[(%type_str/%s)]: (%errstr/%s)"
0x3101000000000050 "out of memory allocating (%item_str/%s)"
0x3101000000000051 "pthread_mutex_init error"
0x3101000000000052 "unable to start thread"
0x3101000000000053 "Firewall rule added:(%Name/%s), (%ip/%s), (%port/%d)"
0x3101000000000054 "Firewall rule deleted:(%Name/%s), (%ip/%s), (%port/%d)"
0x3101000000000055 "Default rule added:(%Name/%s), (%port/%d)"
0x3101000000000056 "Default rule deleted:(%Chain_Name/%s), (%port/%d)"
0x3101000000000057 "Invalid iptable port:(%RULE_NAME/%s), (%PORT/%d)"
0x3101000000000058 "Empty ip. (%RULE_NAME/%s)"
0x3101000000000059 "Failed to execute iptable cmd: (%CMD/%s), (%ERR/%s)"
0x3101000000000060 "Failed getting chain rule count (%CMD/%s)"
0x3101000000000068 "Failed to find CDB component (%COMPONENT/%s)"
0x3101000000000069 "Unable to fetch data from confd (%path/%s) (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)"
0x3101000000000070 "Unable to set in cdb (%path/%s) (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)"
0x3201000000000001 "Error opening file. (%ERRSTR/%s) (%FILE/%s)"
0x3201000000000002 "Error reading bytes (%ERRSTR/%s)"
0x3201000000000003 "Error reading (%SCHEMA/%s) (%ERRSTR/%s)"
0x3201000000000004 "Failed to build schema validator (%ERRSTR/%s)"
0x3201000000000005 "Error reading manifest (%ERRSTR/%s)"
0x3201000000000006 "Failed to validate manifest (%ERRSTR/%s)"
0x3201000000000007 "Failed to create temp directory. (%ERRSTR/%s) (%DIRECTORY_PATTERN/%s)"
0x3201000000000008 "Failed to remove temp directory (%ERRSTR/%s)"
0x3201000000000009 "Failed to open tar file (%ERRSTR/%s)"
0x3201000000000010 "Failed to get item in tar file. (%tar_file/%s) (%ERRSTR/%s)"
0x3201000000000011 "Failed to create file for untar. (%filename/%s) (%ERRSTR/%s)"
0x3201000000000012 "Failed to untar file. (%filename/%s) (%ERRSTR/%s)"
0x3201000000000013 "Failed to chmod. (%filename/%s) (%ERROR/%s)"
0x3201000000000014 "File not found (%FILE/%s) (%MANIFEST/%s)"
0x3201000000000015 "Cannot delete file (%FILE/%s) (%ERRSTR/%s)"
0x3201000000000016 "Failed to start qkivewd daemon. (%ERRSTR/%s)"
0x3201000000000017 "Error: (%ERRSTR/%s)"
0x3201000000000018 "Error collecting peer. (%peerip/%s) (%ERRSTR/%s)"
0x3201000000000019 "qkview-collect failed on host: (%START/%s) (%END/%s) (%RETURNCODE/%d) (%ERR/%s) (%CMDOUT/%s)"
0x3201000000000020 "Error flushing log to tarball. (%logfile/%s) (%ERRSTR/%s)"
0x3201000000000021 "Failed to get valid list of containers. (%ERRSTR/%s)"
0x3201000000000022 "Container finished with error. (%ERRSTR/%s) (%CONTID/%s)"
0x3201000000000023 "Malformed container ID, unable to collect. Empty container ID."
0x3201000000000024 "Failed to copy tarball to container. (%CONTID/%s) (%ERRSTR/%s)"
0x3201000000000025 "Error during container exec command from CONTORRESP. (%CONTORRESP/%s) (%CONTID/%s) (%ERRSTR/%s)"
0x3201000000000026 "Failed to find any file in tarball: (%ERRSTR/%s)"
0x3201000000000027 "Failed to create tarball header"
0x3201000000000028 "Failed to create file for request. (%QKTYPE/%s) (%ERRSTR/%s)"
0x3201000000000029 "Failed to create new request for post. (%QKTYPE/%s) (%ERRSTR/%s)"
0x3201000000000030 "Failed to receive response from request. (%QKTYPE/%s) (%ERRSTR/%s)"
0x3201000000000031 "Invalid json unmarshal. (%QKTYPE/%s) (%ERRSTR/%s)"
0x3201000000000032 "Failed to create new client while collecting snapshots. (%ERRSTR/%s)"
0x3201000000000033 "Unable to receive hostname while collecting snapshots: (%ERRSTR/%s)"
0x3201000000000034 "Unable to complete request due to error REQUEST. (%REQUEST/%s) (%ERRSTR/%s)"
0x3201000000000035 "Stat error while trying to add file. (%FILE/%s) (%ERRSTR/%s)"
0x3201000000000036 "Get header info error while trying to add file. (%FILE/%s) (%ERRSTR/%s)"
0x3201000000000037 "Open error while trying to add file. (%FILE/%s) (%ERRSTR/%s)"
0x3201000000000038 "Write header error while trying to add file. (%FILE/%s) (%ERRSTR/%s)"
0x3201000000000039 "Copy error while trying to add file. (%FILE/%s) (%ERRSTR/%s)"
0x3201000000000040 "Error creating output directory for collate snapshots. (%ERRSTR/%s)"
0x3201000000000041 "Error creating tar file for collate snapshots. (%tar_file/%s) (%ERRSTR/%s)"
0x3201000000000042 "Unable to delete corefiles. (%COREFILE/%s) (%ERRSTR/%s)"
0x3201000000000043 "Error while collecting corefiles (%HOST/%s)"
0x3201000000000044 "Qkview collection is already in progress (%qkview/%s)"
0x3201000000000046 "Qkviewd is starting. (%VERSION/%s) (%LOG/%s) (%DATE/%s)"
0x3201000000000048 "No containers were collected"
0x3201000000000050 "Canceled qkview (%qkview/%s)"
0x3201000000000051 "Get Qkview (%qkview/%s)"
0x3201000000000052 "Deleted qkview file. (%filename/%s)"
0x3201000000000053 "No manifest to verify. (%manifest_file/%s)"
0x3201000000000054 "Completed collecting qkview on host: (%START/%s) (%END/%s) (%RETURNCODE/%d) (%CMDOUT/%s)"
0x3201000000000055 "Starting qkview-collect on host: (%CMD/%s)"
0x3201000000000056 "Requesting host to collect qkview"
0x3201000000000057 "Qkviewd listening on: (%QKVIEWIP/%s)"
0x3201000000000061 "Info: (%MESSAGE/%s)"
0x3201000000000065 "Starting collate of containers, saving to file. (%FILENAME/%s)"
0x3201000000000066 "Finished collate of containers, saved to file. (%FILENAME/%s)"
0x3201000000000067 "Collecting container snapshots. (%FILENAME/%s)"
0x3201000000000068 "Collection of container snapshots has finished. (%FILENAME/%s)"
0x3201000000000080 "Requesting to collect core-files"
0x3201000000000081 "Error walking directory (%path/%s) (%error/%s)"
0x3201000000000082 "Error opening product info file (%file/%s) (%error/%s)"
0x3201000000000083 "Error opening platform info file (%file/%s) (%error/%s)"
0x3201000000000085 "No disk space available for Qkview operation"
0x3201000000000088 "Error retreiving container log (%container/%s) (%error/%s)"
0x3201000000000089 "No container log data found. (%container/%s)"
0x3201000000000090 "TLS Certificates not available to open secure connection"
0x3201000000000091 "Qkviewd listening for secured connections on: (%QKVIEWIP/%s)"
0x3201000000000095 "Qkviewd service is HEALTHY"
0x3201000000000096 "Qkviewd service is UNHEALTHY"
0x3201000000000097 "Qkviewd is going to SHUTDOWN. (%SIGNAL/%s)"
0x3201000000000101 "Qkview file is being collected. (%filename/%s)"
0x3201000000000102 "Unknown error collecting qkview. (%collecting/%d)"
0x3201000000000105 "Error adding subpackage, might have a problem with the file system. (%SUBPACKAGE/%s) (%error/%s)"
0x3201000000000106 "Error adding subpackages (%SUBPACKAGES/%s)"
0x3201000000000107 "Failed to untar file for: (%failed_tar_file/%d)"
0x3301000000000001 "Failed to load schemas from confd."
0x3301000000000002 "Failed to open socket ds."
0x3301000000000003 "Confd connect(ds) failed. (%status/%d)"
0x3301000000000004 "Failed to open socket ss."
0x3301000000000005 "Confd connect(ss) failed. (%status/%d)"
0x3301000000000006 "Confd subscribe(ss) failed. (%status/%d)"
0x3301000000000007 "Confd subscribe_done(ss) failed. (%status/%d)"
0x3301000000000008 "Failed to open socket ods"
0x3301000000000009 "Confd connect(ods) failed. (%status/%d)"
0x3301000000000010 "Failed to open socket od2."
0x3301000000000011 "Confd connect(od2) failed. (%status/%d)"
0x3301000000000012 "Confd connect(oss) failed. (%status/%d)"
0x3301000000000013 "Confd oper_subscribe(oss). (%path/%s) (%status/%d)"
0x3301000000000014 "Confd isubscribe_done(oss). (%status/%d)"
0x3301000000000015 "Confd start_session(od) failed. (%status/%d)"
0x3301000000000016 "Confd start_session(ods) failed. (%status/%d)"
0x3301000000000017 "Confd start_session(ds) failed. (%status/%d)"
0x3301000000000018 "Duplicate Interface object. (%key/%s)"
0x3301000000000019 "Interface object not found. (%key/%s)"
0x3301000000000020 "Duplicate trunk object. (%key/%s)"
0x3301000000000021 "Trunk object not found. (%key/%s)"
0x3301000000000022 "Duplicate trunk config member. (%key/%s)"
0x3301000000000023 "Try to Add an invalid Config Mbr Ignored! (%key/%s)"
0x3301000000000024 "Trunk config member object not found. (%key/%s)"
0x3301000000000025 "Trunk config member object not found. (%port/%d)"
0x3301000000000026 "Link Actor Out of Sync. (%key/%s)"
0x3301000000000027 "Link Partner Out of Sync. (%key/%s)"
0x3301000000000028 "iter_ret: unexpected op. (%path/%s) (%op/%d)"
0x3301000000000029 "initMsgHandler failed."
0x3301000000000030 "connect failed with no fd!"
0x3301000000000031 "Connected to Confd CBD."
0x3301000000000032 "Not connected to Confd CBD."
0x3301000000000033 "Poll failed."
0x3301000000000034 "Too many poll failures, terminating."
0x3301000000000035 "Internal link is AVAILABLE. (%key/%s)"
0x3301000000000036 "Link added to aggregation. (%key/%s) (%trunk/%s)"
0x3301000000000037 "Internal link is UNAVAILABLE. (%key/%s)"
0x3301000000000038 "Link removed from aggregation. (%key/%s) (%trunk/%s)"
0x3301000000000039 "Interface (%key/%s) (%admin_status/%s) (%link_status/%s) (%duplex/%s) (%lacp_state/%s)"
0x3301000000000040 "LACPD starting."
0x3301000000000049 "Lacpd receive info from Confd on trunk. (%name/%s)"
0x3301000000000051 "Fatal error, application exit (%fatal_str/%s)"
0x3301000000000053 "Trunk interface modified. (%name/%s) (%key/%s) (%value/%s)"
0x3301000000000054 "Failed to write to db. (%function/%s) (%path/%s) (%strerr/%s) (%lasterr/%s)"
0x3301000000000055 "Error during tmstat operation. (%api/%s) (%tblname/%s) (%error/%s)"
0x3301000000000056 "Failed to read field from db. (%reader/%s) (%path/%s) (%error/%s) (%lasterr/%s)"
0x3301000000000057 "Failed to delete field in db. (%function/%s) (%path/%s) (%error/%s) (%lasterr/%s)"
0x3301000000000058 "Field does not exist in db. (%function/%s) (%path/%s)"
0x3301000000000059 "Field already exists in db. (%function/%s) (%path/%s)"
0x3301000000000060 "Interface link state changed. (%name/%s) (%status/%s) (%speed/%d) (%duplex/%s)"
0x3301000000000061 "Interface enabled state changed. (%name/%s) (%enabled/%s)"
0x3301000000000062 "Controller LACPD starting (%version/%s) (%date/%s)"
0x3301000000000063 "Waiting to enter an active HA state."
0x3301000000000064 "Entering new HA state. (%state/%s)"
0x3301000000000065 "Event handling started."
0x3301000000000066 "Configured LACP System ID (%ID/%s)"
0x3301000000000067 "New ethernet interface. (%name/%s) (%enabled/%s) (%operstatus/%s) (%mbps/%d) (%mac/%s) (%duplex/%s)"
0x3301000000000068 "Add interface as config member to trunk. (%trunk/%s) (%interface/%s)"
0x3301000000000069 "Remove interface as config member from trunk. (%trunk/%s) (%interface/%s)"
0x3401000000000001 "Failed to load schemas from confd."
0x3401000000000002 "Failed to open socket ds."
0x3401000000000003 "Confd connect(ds) failed. (%status/%d)"
0x3401000000000004 "Failed to open socket ss."
0x3401000000000005 "Confd connect(ss) failed. (%status/%d)"
0x3401000000000006 "Confd subscribe(ss) failed. (%status/%d)"
0x3401000000000007 "Confd subscribe_done(ss) failed. (%status/%d)"
0x3401000000000008 "Failed to open socket ods"
0x3401000000000009 "Confd connect(ods) failed. (%status/%d)"
0x3401000000000010 "Failed to open socket od2."
0x3401000000000011 "Confd connect(od2) failed. (%status/%d)"
0x3401000000000012 "Confd connect(oss) failed. (%status/%d)"
0x3401000000000013 "Confd oper_subscribe(oss). (%path/%s) (%status/%d)"
0x3401000000000014 "Confd isubscribe_done(oss). (%status/%d)"
0x3401000000000015 "Confd start_session(od) failed. (%status/%d)"
0x3401000000000016 "Confd start_session(ods) failed. (%status/%d)"
0x3401000000000017 "Confd start_session(ds) failed. (%status/%d)"
0x3401000000000018 "Duplicate Interface object. (%key/%s)"
0x3401000000000019 "Interface object not found. (%key/%s)"
0x3401000000000020 "Duplicate trunk object. (%key/%s)"
0x3401000000000021 "Trunk object not found. (%key/%s)"
0x3401000000000022 "Duplicate trunk config member. (%key/%s)"
0x3401000000000023 "Try to Add an invalid Config Mbr Ignored! (%key/%s)"
0x3401000000000024 "Trunk config member object not found. (%key/%s)"
0x3401000000000025 "Trunk config member object not found. (%port/%d)"
0x3401000000000026 "Link Actor Out of Sync. (%key/%s)"
0x3401000000000027 "Link Partner Out of Sync. (%key/%s)"
0x3401000000000028 "iter_ret: unexpected op. (%path/%s) (%op/%d)"
0x3401000000000029 "initMsgHandler failed."
0x3401000000000030 "connect failed with no fd!"
0x3401000000000031 "Connected to Confd CBD."
0x3401000000000032 "Not connected to Confd CBD."
0x3401000000000033 "Poll failed."
0x3401000000000034 "Too many poll failures, terminating."
0x3401000000000035 "Internal link is AVAILABLE. (%key/%s)"
0x3401000000000036 "Link added to aggregation. (%key/%s)"
0x3401000000000037 "Internal link is UNAVAILABLE. (%key/%s)"
0x3401000000000038 "Link removed from aggregation. (%key/%s)"
0x3401000000000039 "Interface (%key/%s) (%admin_status/%s) (%link_status/%s) (%duplex/%s) (%lacp_state/%s)"
0x3401000000000040 "LACPD starting (%version/%s) (%date/%s)"
0x3401000000000042 "Lacpd received trunk config from Confd. (%name/%s)"
0x3401000000000043 "Lacpd received interface config from Confd. (%name/%s)"
0x3401000000000044 "Lacpd is restarting to failover to the other controller"
0x3401000000000046 "(%info_str/%s)"
0x3401000000000047 "(%err_str/%s)"
0x3401000000000049 "Fatal error, application exit (%fatal_str/%s)"
0x3401000000000050 "Error during tmstat operation. (%API/%s) (%TBLNAME/%s) (%error/%s)"
0x3401000000000051 "Interface field modified. (%name/%s) (%key/%s) (%value/%s)"
0x3401000000000052 "Trunk field modified. (%name/%s) (%key/%s) (%value/%s)"
0x3401000000000053 "Worker LACPD instance was unresponsive and timed out. (%slot/%d) (%timeout/%d)"
0x3401000000000054 "New worker LACPD instance found. (%slot/%d)"
0x3401000000000055 "Adding config member. (%interface/%s) (%trunk/%s)"
0x3401000000000056 "Removing config member. (%interface/%s) (%trunk/%s)"
0x3401000000000058 "Removing LACP trunk. (%name/%s)"
0x3401000000000059 "Modify LACP trunk params. (%name/%s) (%type/%s) (%mode/%s) (%interval/%s)"
0x3401000000000060 "Adding working member. (%interface/%s) (%trunk/%s)"
0x3401000000000061 "Removing working member. (%interface/%s) (%trunk/%s)"
0x3401000000000062 "Adding message to send queue. (%type/%s) (%trunk/%s) (%interface/%s)"
0x3401000000000063 "Processing message. (%type/%s) (%trunk/%s) (%interface/%s)"
0x3401000000000064 "Callpoint error. (%hook_type/%s) (%when/%s) (%reason/%s)"
0x3401000000000066 "Failed to initialize L2 Plugin"
0x3401000000000067 "Successfully initialized L2 Plugin"
0x3401000000000068 "zmq poll timeout or error (%port/%d) (%cnt/%d) (%errno/%d) (%errno_str/%s)"
0x3401000000000069 "Failed to send lacp reset counters request (%slot/%d)"
0x3401000000000070 "Failed to initialize zmq client (%slot/%d) (%type/%s) (%reason/%s)"
0x3401000000000071 "Failed to read field from db. (%reader/%s) (%path/%s) (%error/%s) (%lasterr/%s)"
0x3401000000000072 "Failed to write to db, retrying. (%reason/%s) (%strerr/%s) (%lasterr/%s)"
0x3401000000000073 "Field does not exist in db. (%function/%s) (%path/%s)"
0x3401000000000074 "Field already exists in db. (%function/%s) (%path/%s)"
0x3401000000000075 "Failed to write to db. (%function/%s) (%path/%s) (%strerr/%s) (%lasterr/%s)"
0x3401000000000076 "Received fatal signal, exiting. (%signal/%d)"
0x3401000000000077 "New System ID configured. (%id/%s)"
0x3401000000000078 "Found deployment mode. (%mode/%s)"
0x3401000000000079 "Found running slot. (%slot/%d)"
0x3401000000000080 "Waiting to enter an active HA state."
0x3401000000000081 "Event handling started."
0x3401000000000082 "Instance connected to sep device."
0x3401000000000083 "New trunk interface. (%name/%s) (%type/%s) (%mode/%s) (%interval/%s)"
0x3401000000000084 "Interface link state changed. (%name/%s) (%status/%s) (%speed/%d)"
0x3401000000000085 "Interface enabled state changed. (%name/%s) (%enabled/%s)"
0x3401000000000086 "Field does not exist in db. (%function/%s) (%path/%s)"
0x341000000000001 "unable to verify platform-hal at startup"
0x341000000000002 "unable to query platform data at startup"
0x341000000000003 "platform monitor starting" version=%v role=%v slot=%v
0x3901000000000001 "cdb_get failed (%ret/%d) (%confd_errno/%d) (%fmt/%s)"
0x3901000000000002 "Failed to read cert file (%name/%s)"
0x3901000000000004 "Certificate not yet valid (%file/%s)"
0x3901000000000005 "chmod failed (%rc/%d)"
0x3901000000000006 "Failed to copy (%file/%s)"
0x3901000000000008 "Creating CSR (%name/%s)"
0x3901000000000009 "Failed to read input crl file. (%filename/%s)"
0x3901000000000010 "Failed to write crl file: (%path/%s)"
0x3901000000000012 "File cannot be opened (%file/%s)"
0x3901000000000013 "OpenSSL public key failed."
0x3901000000000014 "Key/Certificate mismatch (%file1/%s) (%file2/%s)"
0x3901000000000015 "Failed to open key file (%name/%s)"
0x3901000000000016 "Failed to read key file (%name/%s)"
0x3901000000000017 "Specified maapi element does not exists in cdb (%path/%s)(%key/%s)"
0x3901000000000018 "Failed to set element in cdb (%path/%s)(%key/%s)(%error/%s)(%errno/%s)"
0x3901000000000019 "OpenSSL ASN1_INTEGER_new failed to allocate memory."
0x3901000000000020 "OpenSSL ASN1_STRING_set_default_mask_asc failed."
0x3901000000000021 "OpenSSL BIO_new_fp failed allocate memory."
0x3901000000000022 "OpenSSL BIO_new failed allocate memory."
0x3901000000000024 "OpenSSL BIO_write failed to write CSR."
0x3901000000000025 "OpenSSL BN_GENCB_set failed to generate callback."
0x3901000000000026 "OpenSSL BN_new failed allocate memory."
0x3901000000000028 "OpenSSL BN_pseudo_rand failed."
0x3901000000000029 "OpenSSL BN_set_word failed."
0x3901000000000030 "OpenSSL BN_to_ASN1_INTEGER failed."
0x3901000000000031 "OpenSSL certificate key is nil."
0x3901000000000032 "OpenSSL CONF_modules_load failed."
0x3901000000000033 "Certificate Request city (%city/%s)."
0x3901000000000034 "Certificate Request country (%country/%s)."
0x3901000000000035 "Certificate Request email (%email/%s)."
0x3901000000000036 "Certificate Request name (%name/%s)."
0x3901000000000037 "Certificate Request organization (%organization/%s)."
0x3901000000000038 "Certificate Request organizational unit (%unit/%s)."
0x3901000000000039 "Certificate Request region (%state/%s)."
0x3901000000000040 "Certificate Request version (%version/%d)."
0x3901000000000042 "OpenSSL do_sign_init failed."
0x3901000000000043 "OpenSSL EC_GROUP_new_by_curve_name failed."
0x3901000000000044 "OpenSSL EC_KEY_generate_key failed."
0x3901000000000045 "OpenSSL EC_KEY_new failed to allocate memory."
0x3901000000000046 "OpenSSL EC_KEY_set_group failed."
0x3901000000000048 "OpenSSL_malloc failed to allocate bytes (%size/%u)"
0x3901000000000049 "OpenSSL X509_name parse error."
0x3901000000000050 "OpenSSL NCONF_get_section failed."
0x3901000000000051 "OpenSSL NCONF_get_string failed to find file (%file/%s)"
0x3901000000000052 "OpenSSL NCONF_load failed for file (%file/%s)"
0x3901000000000053 "OpenSSL NCONF_new failed to allocate memory."
0x3901000000000054 "OpenSSL OBJ_create failed for (%name/%s)."
0x3901000000000055 "OpenSSL OBJ_sn2nid failed."
0x3901000000000056 "OpenSSL PEM_bytes_read_bio failed (%name/%s)"
0x3901000000000057 "OpenSSL PEM_read_bio_X509_REQ failed read csr."
0x3901000000000058 "Failed to read crl. Invalid PEM format crl input"
0x3901000000000059 "OpenSSL PEM_read_bio_PrivateKey failed read key (%file/%s)"
0x3901000000000060 "OpenSSL PEM_write_bio_ECPrivateKey failed to write key."
0x3901000000000061 "OpenSSL PEM_write_bio_RSAPrivateKey failed to write key."
0x3901000000000062 "OpenSSL PEM_write_bio_X509_REQ failed write certificate request."
0x3901000000000063 "OpenSSL dev random error."
0x3901000000000064 "OpenSSL RSA_generate_key_ex failed."
0x3901000000000065 "OpenSSL RSA_new_method failed."
0x3901000000000066 "OpenSSL Subject not starting with backslash."
0x3901000000000067 "OpenSSL X509_get_pubkey failed to get public key."
0x3901000000000068 "OpenSSL X509_gmtime_adj failed."
0x3901000000000069 "OpenSSL X509_NAME_add_entry_by_NID failed for (%name/%s)."
0x3901000000000070 "OpenSSL X509_Name_new failed to allocate memory."
0x3901000000000071 "OpenSSL X509_new failed to allocate memory."
0x3901000000000072 "OpenSSL X509_REQ_get_pubkey failed to get public key."
0x3901000000000073 "OpenSSL X509 create CSR failed."
0x3901000000000074 "OpenSSL X509_REQ_new failed to allocate memory."
0x3901000000000075 "OpenSSL X509_REQ_set_pubkey failed."
0x3901000000000076 "OpenSSL X509_REQ_set_subject_name failed."
0x3901000000000077 "OpenSSL X509_REQ_set_version failed."
0x3901000000000078 "OpenSSL X509_REQ_verify failed to verify signature."
0x3901000000000079 "OpenSSL X509_set_issuer_name failed."
0x3901000000000080 "OpenSSL X509_set_pubkey failed to set public key."
0x3901000000000081 "OpenSSL X509_set_serialNumber failed."
0x3901000000000082 "OpenSSL X509_sign failed."
0x3901000000000083 "OpenSSL X509_STORE_new failed allocate memory."
0x3901000000000084 "OpenSSL X509_time_adj_ex failed."
0x3901000000000085 "OpenSSL X509V3_EXT_add_nconf failed to load extension (%name/%s)."
0x3901000000000086 "OpenSSL X509V3_EXT_REQ_add_nconf failed to load extension (%name/%s)."
0x3901000000000087 "create_server failed (%pam_radius_conf/%s) (%rad_server/%s) (%timeout/%d)"
0x3901000000000088 "OpenSSL X509_STORE_set_default_paths failed."
0x3901000000000090 "(%message/%s)"
0x3901000000000091 "create_pam_tacplus_item failed (%server/%s)."
0x3901000000000092 "LDAP server: (%server/%s)"
0x3901000000000093 "LDAP search base: (%base/%s)"
0x3901000000000094 "LDAP bind DN: (%binddn/%s)"
0x3901000000000095 "LDAP bind password: supplied"
0x3901000000000096 "LDAP SSL: (%ssl/%s)"
0x3901000000000097 "The Active Directory server does not support unix attributes such as uidNumber; attempting to create alternate objectSid to uidNumber mappings."
0x3901000000000098 "Unable to retrieve domain Sid for supplied servers and domains; server will be treated as if it has unix attributes present."
0x3901000000000099 "Domain sID: (%sid/%s)"
0x3901000000000100 "(%item/%s): (%data/%s)"
0x3901000000000101 "LDAP API error during (%oper/%s): (%code/%d) - (%msg/%s)"
0x3901000000000104 "Active Directory enabled"
0x3901000000000105 "Saved Certificate Authority (CA) Bundle file: (%name/%s)"
0x3901000000000106 "Unable to save Certificate Authority (CA) Bundle file: (%name/%s) (%errnum/%d)"
0x3901000000000107 "LDAP bind password supplied but empty; acting as if no bind password"
0x3901000000000108 "Missing server secret. (%path/%s)"
0x3901000000000109 "Failed to set element in cdb. (%path/%s) (%error/%s) (%errno/%s)"
0x3901000000000110 "Saved HTTPD configuration file. (%name/%s)"
0x3901000000000111 "Unable to save HTTPD configuration file. (%name/%s) (%errnum/%d)"
0x3901000000000112 "Authentication Manager starting. (%version/%s) (%log/%s) (%date/%s)"
0x3901000000000113 "SERVICE_INDICATOR initializing authentication-mgr in FIPS 140-3 mode"
0x3901000000000114 "AUDIT - SERVICE_INDICATOR (%user/%s) (%msg/%s) (%algo/%s)"
0x3901000000000116 "OpenSSL Keys and Certificates must start with -----BEGIN ..."
0x3901000000000120 "CA-BUNDLE input data is formatted with the wrong number of dashes."
0x3901000000000122 "Unsuported key type entered."
0x3901000000000123 "Basic authentication update succeeded."
0x3901000000000124 "Unable to create a certificate signing request(CSR)."
0x3901000000000125 "Certificate size is bigger than (%m_cert_size/%u) and cannot be used."
0x3901000000000126 "Commit approved for blank key and certificate."
0x3901000000000127 "A zero key size but none-zero certificate is unacceptable."
0x3901000000000128 "Key size is too big."
0x3901000000000129 "Commit approved for missing certificate."
0x3901000000000130 "Certificate revocation list size=(%m_crl_size/%d) is too big and cannot be used."
0x3901000000000131 "Tokenlifetime successfully updated in ConfD database."
0x3901000000000132 "Path=(%m_tokenlifetime_cfg_path/%s) does not exist."
0x3901000000000133 "Failed setting Operational state data for tokenlifetime"
0x3901000000000134 "Key size too big to be supported."
0x3901000000000135 "Failed to create a directory. (%PATH/%s) (%Error_Message/%s)"
0x3901000000000136 "Deleted HTTPD configuration file. (%name/%s)"
0x3901000000000137 "Opening SElinux port for tacacs server. (%port/%d) (%server/%s)"
0x3901000000000138 "Closing SElinux port for tacacs server. (%port/%d) (%server/%s)"
0x3901000000000139 "Failed to update state data for specified path. (%PATH/%s) (%confd_errno/%d)"
0x3901000000000143 "Unable to open pam config file (%PATH/%s)"
0x3901000000000146 "The OCSP IP address is not configured. Setting OCSP override-responder to off."
0x3901000000000147 "CDB get operation failed. (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x3901000000000148 "System's IPv4 management address isn't configured."
0x3901000000000149 "System's IPv6 management address isn't configured."
0x4001000000000001 "pthread_create[config]: (%strerror/%s)"
0x4001000000000002 "pthread_mutex_lock: (%strerror/%s)"
0x4001000000000003 "pthread_mutex_unlock: (%strerror/%s)"
0x4001000000000004 "log fopen failed: (%strerror/%s)"
0x4001000000000005 "pthread_mutex_init[config]: (%strerror/%s)"
0x4001000000000006 "pthread_cond_init[config]: (%strerror/%s)"
0x4001000000000007 "Unable to start ConfD CFG thread. "
0x4001000000000009 "get_blade_base_mac for slot failed (%FUNCTION/%s) (%slot/%d)"
0x4001000000000010 "snprintf mac address bad length (%FUNCTION/%s) (%length/%d)"
0x4001000000000011 "hard link failed (%FUNCTION/%s) (%filename/%s) (%hardlinkname/%s) (%strerror/%s)"
0x4001000000000012 "set_pxe_server slot failed (%slot/%d)"
0x4001000000000013 "filename bad length (%FUNCTION/%s) (%length/%d)"
0x4001000000000014 "pxe file open failed (%FUNCTION/%s) (%strerror/%s)"
0x4001000000000015 "pxe file write failed (%FUNCTION/%s) (%SERIAL_LINE/%s) (%strerror/%s)"
0x4001000000000016 "sprintf KERNEL bad length (%FUNCTION/%s) (%length/%d)"
0x4001000000000017 "sprintf APPEND bad length (%FUNCTION/%s) (%length/%d)"
0x4001000000000018 "pxe file close failed (%FUNCTION/%s) (%strerror/%s)"
0x4101000000000001 "pthread_mutex_lock (%errstr/%s)"
0x4101000000000002 "pthread_mutex_unlock (%errstr/%s)"
0x4101000000000003 "out of memory allocating (%item_str/%s)"
0x4101000000000004 "poll (%errstr/%s)"
0x4101000000000005 "confd_pp_kpath() returned ; >= (%rc/%d) (%BUFSIZ/%d)"
0x4101000000000006 "unexpected operation (%op/%d)"
0x4101000000000007 "maapi_get_(%type/%s)_elem failed: (%path_str/%s)"
0x4101000000000008 "preparing to init confd: dup2 (%errstr/%s)"
0x4101000000000009 "fcntl: close-on-exec 0 (%errstr/%s)"
0x4101000000000010 "open: varlog/confd (%errstr/%s)"
0x4101000000000011 "dup2: stdout (%errstr/%s)"
0x4101000000000012 "dup2: stderr (%errstr/%s)"
0x4101000000000013 "execl: /usr/bin/confd (%errstr/%s)"
0x4101000000000014 "maapi_start_user_session() failed, error code: (%rc/%d)"
0x4101000000000015 "maapi_start_trans() failed, error code: (%confd_errno/%d)"
0x4101000000000016 "unable to fetch: (%path_str/%s)"
0x4101000000000017 "maapi_finish_trans() failed, rc: (%rc/%d)"
0x4101000000000018 "hal_request_ha_active() failed "
0x4101000000000019 "hal_get_ha_active() failed "
0x4101000000000020 "Out of space in packet buffer (%num/%u)"
0x4101000000000021 "malformed packet tlv type (%tlv_type/%u)"
0x4101000000000022 "malformed packet tlv type (%tlv_type/%u); len (len1%%u) < (%len2/%u)"
0x4101000000000023 "malformed packet tlv type (%tlv_type/%u); len (len1%%u) > (%len2/%u)"
0x4101000000000024 "malformed packet tlv type (%tlv_type/%u); missing null byte"
0x4101000000000025 "malformed packet tlv; tlv extends past end"
0x4101000000000026 "(%file_str/%s): (%errstr/%s); reboot aborted"
0x4101000000000027 "remote and local controller network mismatch...rebooting."
0x4101000000000028 "sendto[raw]: (%errstr/%s)"
0x4101000000000029 "recvd our own HA packet; discarding..."
0x4101000000000030 "unexpected active controller: (%slot/%u)"
0x4101000000000031 "unexpected ha_mode: (%mode/%u)"
0x4101000000000032 "unexpected tag: (%tag/%d)"
0x4101000000000033 "pthread_create[(%type_str/%s)]: (%errstr/%s)"
0x4101000000000034 "read: health pipe: (%errstr/%s)"
0x4101000000000035 "read: health pipe EOF"
0x4101000000000036 "Error scanning health helper (%type_str/%s) input line ((%len1/%d) != (%len2/%d))"
0x4101000000000037 "add_to_health (%type_str/%s) failed"
0x4101000000000038 "unexpected health line: (%line_str/%s)"
0x4101000000000039 "component (%comp_str/%s) NOT healthy"
0x4101000000000040 "attribute (%comp_str/%s) tag (%attr_str/%s) NOT healthy"
0x4101000000000041 "fcntl(..., F_SETFL, O_NONBLOCK): (%errstr/%s)"
0x4101000000000042 "fork: (%reason_str/%s): (%errstr/%s)"
0x4101000000000043 "dup2: (%reason_str/%s): (%errstr/%s)"
0x4101000000000044 "freopen: (%reason_str/%s): (%errstr/%s)"
0x4101000000000045 "execl: (%reason_str/%s): (%errstr/%s)"
0x4101000000000046 "getifaddrs: (%errstr/%s)"
0x4101000000000047 "unable to locate interface for (%int_str/%s)"
0x4101000000000048 "unable to init health helper"
0x4101000000000049 "Unable to look up (%var_str/%s) in environment"
0x4101000000000050 "(%sock_type_str/%s): socket: (%errstr/%s)"
0x4101000000000051 "(%sock_op_str/%s): setsockopt: (%errstr/%s)"
0x4101000000000052 "ioctl: (%ioctl_str/%s) (%errstr/%s)"
0x4101000000000053 "confd --wait-phase0: failed "
0x4101000000000054 "confd_init_daemon failed (%errstr/%s)"
0x4101000000000055 "socket[(%type_str/%s)] failed "
0x4101000000000056 "confd_load_schemas failed[] (%addr/%s)"
0x4101000000000057 "confd_register_valpoint_cb ((%reason_str/%s)) failed"
0x4101000000000058 "confd_register_done (%errstr/%s) failed"
0x4101000000000059 "confd --start-phase1: failed"
0x4101000000000060 "confd --start-phase2: failed"
0x4101000000000061 "pthread_mutex_init[(%type_str/%s)] (%errstr/%s)"
0x4101000000000062 "unable to start thread[(%type_str/%s)]"
0x4101000000000063 "be active failed: confd_errno: (%confd_errno/%d)"
0x4101000000000064 "ConfD is now Active"
0x4101000000000065 "Confd is now None"
0x4101000000000066 "ConfD is now Standby "
0x4101000000000067 "waitpid: confd exited code (%code/%d)"
0x4101000000000068 "waitpid: confd terminated signal (%code/%d)"
0x4101000000000069 "waitpid: unexpected (%errstr/%s)"
0x4101000000000070 "role change detected -> (%ha_role_old/%d) (%ha_role/%d)"
0x4101000000000071 "confd_ha_get_status failed: err (%rc/%d)"
0x4101000000000072 "standby confd lost contact with active confd"
0x4101000000000073 "fopen: /var/log/vcc-confd-hal (%errstr/%s)"
0x4101000000000074 "hal_init() failed "
0x4101000000000075 "Unable to look up local CC slot number from HAL..retrying "
0x4101000000000076 "invalid number of slots specified via VCC_HAL_NUMSLOTS "
0x4101000000000077 "Unable to look up number of slots from HAL..retrying "
0x4101000000000078 "Failure to generate initial VCC config (%cmd_bf/%s)"
0x4101000000000079 "Failure to generate initial blade components (%cmd_bf/%s)"
0x4101000000000080 "Only chassis with 8 slots and 32 slots are supported now "
0x4101000000000081 "Failure to generate initial firmware config (%cmd_buf/%s)"
0x4101000000000082 "Failure to generate initial blade components (%cmd_bf/%s)"
0x4101000000000083 "preparing to init confd: pipe (%errstr/%s)"
0x4101000000000084 "Partition name \'\' may not contain \'\' (%partname/%s) (%c/%c)"
0x4101000000000085 "active_status: (%cpld_string_active_status/%s) (%size/%x)"
0x4101000000000086 "phase 2 confd init complete...ConfD is up"
0x4101000000000087 "preparing to init confd: fork (%errstr/%s)"
0x4101000000000088 "unknown system_type: (%system_type_str/%s)"
0x4101000000000089 "pthread_cond_init[(%type_str/%s)] (%errstr/%s)"
0x4101000000000090 "unknown image_type: (%image_type_str/%s)"
0x4101000000000091 "invalid image type: (%image_type/%d)"
0x4101000000000092 "popen (%errstr/%s)"
0x4101000000000093 "unable to get response from sw mgmt API"
0x4101000000000094 "missing newline in response from sw mgmt API"
0x4101000000000095 "config_backup: args: (%args/%p)"
0x4101000000000096 "Config backup command failed"
0x4101000000000097 "Config backup failed"
0x4101000000000098 "config_restore: args: (%args/%p)"
0x4101000000000099 "config_restore: confd_pid: (%confd_pid/%d)"
0x4101000000000100 "Config restore command failed"
0x4101000000000101 "Config restore failed"
0x4101000000000102 "init_action: uinfo: (%uinfo/%p)"
0x4101000000000103 "init_action: acb: (%acb/%p)"
0x4101000000000104 "init_action: action_data: (%action_data/%p)"
0x4101000000000105 "do_action: uinfo: (%uinfo/%p)"
0x4101000000000106 "do_action: acb: (%acb/%p)"
0x4101000000000107 "do_action: name: (%name/%p)"
0x4101000000000108 "do_action: nparams: (%nparams/%d)"
0x4101000000000109 "do_action: action_data: (%action_data/%p)"
0x4101000000000110 "do_action: invalid name->tag"
0x4101000000000111 "abort_action: uinfo: (%uinfo/%p)"
0x4101000000000112 "action_poll_loop_iter: action_data: (%action_data/%p)"
0x4101000000000113 "action_poll_loop_iter: confd_pid: (%confd_pid/%d)"
0x4101000000000114 "action_poll_loop_iter: control_socket: (%control_socket/%d)"
0x4101000000000115 "action_poll_loop_iter: worker_socket: (%worker_socket/%d)"
0x4101000000000116 "action_connect_loop_iter: action_data: (%action_data/%p)"
0x4101000000000117 "action_connect_loop_iter: confd_pid: (%confd_pid/%d)"
0x4101000000000118 "register action handler failed"
0x4101000000000119 "register done failed"
0x4101000000000120 "action_thread_func: args: (%args/%p)"
0x4101000000000121 "action_thread_func: confd_pid: (%confd_pid/%d)"
0x4101000000000122 "vcc-confd exiting to restore config"
0x4101000000000123 "Failed to create reset flag file."
0x4101000000000124 "maapi_finish_trans() failed, error code: (%confd_errno/%d)"
0x4101000000000125 "failed to update config, clearing, backed up to (%rename_dir/%s)"
0x4101000000000126 "failed config clear command: (%cmd/%s), rc: (%rc/%d)"
0x4101000000000127 "update test failed in phase (%phase/%u)"
0x4101000000000128 "update test passed"
0x4101000000000129 "command: (%cmd/%s): failed"
0x4101000000000130 "error generating init file: (%file/%s)"
0x4101000000000131 "failed to upgrade, will try restoring last version"
0x4101000000000132 "VCC_CONFD_CONFIG_FIX: Fixed and commited NETWORK_RANGE_TYPE"
0x4101000000000133 "confd phase0 db adjustment failed (%field_str/%s)"
0x4101000000000134 "Confd maapi attach init operation failed"
0x4101000000000135 "Confd maapi set_namesapce operation failed (%namespace_str/%s)"
0x4101000000000136 "Initial database startup complete (%startup/%s)
0x4101000000000137 "CCRU: Confd install stage inconsistent (%msg/%s)"
0x4101000000000138 "CCRU: Standby installation of os version (%os/%s) / service version (%svc/%s), switch Active and continue"
0x4101000000000139 "pthread_mutex_trylock (%errstr/%s)"
0x4101000000000140 "System call to getConfdPrimaryKey --partition failed (%size/%d)"
0x4301000000000001 "Platform Stats Bridge Starting. (%version/%s) (%date/%s)"
0x4301000000000002 "Platform Stats Bridge Exiting."
0x4301000000000003 "(%func/%s): stats timeout for (%component/%s)"
0x4302000000000001 "(%func/%s): Unable to start confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x4302000000000002 "(%func/%s): Unable to create cdb entry. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x4302000000000003 "(%func/%s): Unable to delete cdb entry. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x4302000000000004 "(%func/%s): Failed to get a cdb entry. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x4302000000000005 "(%func/%s): get_next timeout for (%component_name/%s)"
0x4302000000000006 "Invalid xml tag to get element value. (%xmltag/%d)"
0x4302000000000007 "Received invalid cdb operation. (%op/%d) in CPU data map update"
0x4303000000000001 "Error reply received while fetching stats. (%ERRCODE/%x) (%ERRORSTR/%s)"
0x4303000000000005 "Snmp stats requested (%tablename/%s)"
0x4303000000000006 "Snmp stats timeout called while fetching stats (%tablename/%s)"
0x4303000000000007 "Not able to fetch stats ZMQ client setup failed ((%tablename/%s) (%slot/%d))"
0x4305000000000001 "Error reply received while fetching stats. (%ERRCODE/%x) (%ERRORSTR/%s)"
0x4305000000000005 "New primary slot (%slot/%d)"
0x4701000000000001 "Line DMA Agent Starting"
0x4701000000000002 "TCPD shared memory mapping failed"
0x4701000000000003 "DM context memory mappin failed"
0x4701000000000004 "TCPD socket initialization failed"
0x4701000000000005 "L2 socket initialization failed"
0x4701000000000006 "PCIe device attach failed"
0x4701000000000007 "IOMMU setup failed"
0x4701000000000008 "Packet capture startup configuration failed"
0x4701000000000009 "Packet capture started"
0x4701000000000010 "Packet capture stopped"
0x4701000000000011 "Packet capture client connected"
0x4701000000000012 "Packet capture client disconnected"
0x4701000000000013 "Packet capture client conenction rejected as client already connected"
0x4701000000000014 "L2 client connected"
0x4701000000000015 "L2 client disconnected"
0x4701000000000016 "L2 client conenction rejected as client already connected"
0x4801000000000001 "optics-mgr starting (%version/%s) (%date/%s) (%partition/%s)"
0x4801000000000002 "optics-mgr exiting"
0x4801000000000003 "optics-mgr error (%error/%s)"
0x4801000000000004 "optics-mgr HAL response error. (%errorcode/%d) (%errmsg/%s)"
0x4801000000000005 "optics-mgr invalid hardware platform (%hardwaretype/%d)"
0x4801000000000006 "No optical tuning available (%partnum/%s) (%interface/%s) (%revision/%s)"
0x4801000000000007 "No optical tuning available for optical version (%major/%d) (%minor/%d)"
0x4801000000000008 "Optical tuning invalid port (%partnum/%s) (%port/%s) (%revision/%s)"
0x4801000000000010 "Received request to validate optic. (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)"
0x4801000000000011 "OPTICS_SUCCESS_TUNING_NEEDED returning tuning (%numctle/%u) (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)"
0x4801000000000012 "OPTICS_SUCCESS_NO_TUNING (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)"
0x4801000000000013 "Failed to find tuning for optic (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)"
0x4801000000000014 "Received request to validate optic. (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s) (%hwtype/%s)"
0x4801000000000015 "Received request to validate optic. (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s) (%hwtype/%s) (%speed/%s) (%lifeycle/%s)"
0x4801000000000016 "OPTICS_TUNING_EARLY_SUPPORT returning tuning (%numctle/%u) (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)"
0x4801000000000017 "OPTICS_SUCCESS_NO_TUNING_EARLY_SUPPORT (%brand/%s) (%oui/%s) (%rev/%s) (%ifname/%s) (%pn/%s)"
0x4802000000000001 "optics-mgr unable to initialize ZMQ. (%error/%d)"
0x4802000000000002 "ZMQ Message Server Started. Listening on (%port/%d)"
0x4802000000000003 "Failed to register endpoint (%endpoint/%s)"
0x4802000000000004 "Failed to deregister endpoint (%endpoint/%s)"
0x4802000000000005 "Failed to send reply (%endpoint/%s) (%replytype/%s)"
0x4802000000000006 "Failed to get zmq handle to socket"
0x4802000000000007 "Failed to add source data to ZMQ envelope (%endpoint/%s)"
0x4802000000000008 "Failed to init ZMQ envelope (%endpoint/%s)"
0x4802000000000009 "Failed to init ZMQ payload (%endpoint/%s)"
0x4802000000000010 "Expect non null ZMQ payload (%endpoint/%s)"
0x4802000000000011 "Unexpected payload count, should be 1. No response generated (%cnt/%d)",
0x5010000000000001 "OrchAgent starting (%Version/%s) (%Date/%s)"
0x5010000000000002 "OrchAgent exiting"
0x5010000000000004 "SERVICE_INDICATOR initializing orchestration-agent in FIPS 140-3 mode"
0x5010000000000005 "Chassis serial number is invalid - tenants will not operate"
0x5010000000000006 "Invalid Platform Type (%msg/%s)"
0x5020000000000001 "maapi failed to connect to config daemon (%ERRNOSTR/%s) (%LASTERR/%s)"
0x5020000000000002 "failed to end session with config daemon (%ERRNOSTR/%s) (%LASTERR/%s)"
0x5030000000000001 "maapi_set failed for (%TENANTCONFIG/%s) (%ATTRIBUTE/%s) (%PATH/%s) (%ERRNOSTR/%s) (%ERRNO/%d)"
0x5030000000000002 "maapi_create failed for (%TENANTCONFIG/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000006 "cdb_get failed for SLOTCONFIG name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000007 "cdb_get failed for (%SLOTCONFIG/%d) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000008 "cdb_get failed in getting the base-mac for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000009 "cdb_get failed in getting the mgmt-mac for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000010 "cdb_get failed in getting the mac pool size for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000011 "failed to read partition slot data (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000012 "maapi_set_elem failed for interface (%INTERFACE/%s)"
0x5030000000000013 "maapi_create failed for hugepages (%slot/%d) (%PATH/%s) for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000014 "maapi_delete failed for hugepages (%slot/%d) (%PATH/%s) for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000015 "tenant console user operation failed for (%USER/%s) (%OP/%s) (%ERRNOSTR/%s) (%ERRNO/%d)"
0x5030000000000016 "tenant console user added (%USER/%s)"
0x5030000000000017 "tenant console user deleted (%USER/%s)"
0x5030000000000018 "Failed to update node running state for node (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000019 "Failed to update node name for node (%PATH/%s)"
0x5030000000000020 "Failed to update node state for node (%PATH/%s)"
0x5030000000000021 "Failed to read node name for index (%node/%d)"
0x5030000000000022 "Failed to read node config state for node (%PATH/%s)"
0x5030000000000023 "cdb_get failed in getting the appliance-mode for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000024 "New tenant (%TENANT/%s) has been added in tenant DB. state = CONFIGURED, blade (%blade/%d)"
0x5030000000000025 "cdb_get failed for (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000026 "cdb_get failed in getting the storage size for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000027 "unknown tenant (%name/%s) instance type (%type/%u)"
0x5030000000000028 "cdb_get failed for (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000029 "Sub-module configuration created. (%TENANT/%s)"
0x5030000000000030 "Sub-module configuration deleted. (%TENANT/%s)"
0x5030000000000031 "Unable to fetch feature flag in function (%func/%s)"
0x5030000000000032 "total_tenants_existing : (%tenant_count/%d)"
0x5030000000000033 "Invalid tenant instantiation"
0x5030000000000034 "Tenant name (%TENANT/%s) is already being used by existing system service (%SERVICE/%s)"
0x5030000000000035 "Platform self signed cert and key size is zero"
0x5030000000000036 "Failed to create maapi transaction. (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000037 "Failed to create maapi read transaction. (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5030000000000038 "Key header check failed (%HEADER/%s)"
0x5030000000000039 "Key Hash (%TYPE/%s) (%HASH/%s)"
0x5030000000000040 "maapi install crypto keys error. (%ERRNOSTR/%s) (%ERRNO/%d)"
0x5030000000000041 "(%ERR/%s) (%ERRNOSTR/%s) (%ERRNO/%d)"
0x5040000000000001 "cdb_get failed for TENANTCONFIG name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000002 "cdb_cd failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000003 "cdb_get failed for (%TENANTCONFIG/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000004 "cdb_get failed for (%TENANTCONFIG/%d) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000005 "cdb_set failed for (%TENANTCONFIG/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000006 "cdb_delete failed for (%TENANTCONFIG/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000007 "cdb_get failed to get mac for mac entry (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000008 "cdb_get failed for vlans (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000009 "cdb_get failed in getting the vlan for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000010 "Platform is not ready on node (%PLATFORM/%d) (%node/%d)"
0x5040000000000011 "Failed to end session with config daemon on cluster oper data (%ERRNOSTR/%s) (%LASTERR/%s)"
0x5040000000000012 "cdb_delete failed for (%TENANTINSTANCE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000013 "cdb_get failed for (%TENANTINSTANCECONFIG/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000014 "cdb_get failed for TENANT name (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000015 "cdb_get failed for pod name for tenant (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000016 "cdb_get failed for pod node for tenant (%TENANT/%s) pod (%POD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000017 "cdb_get failed for pod ip for tenant (%TENANT/%s) pod (%POD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000018 "pod ip type unsupported for tenant (%TENANT/%s) pod (%POD/%s) type (%TYPE/%d)"
0x5040000000000019 "cdb_get failed for TENANT type (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000020 "cdb_cd failed for (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000021 "submod cdb_get failed for (%TENANTCONFIG/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000022 "submod cdb_get failed for (%TENANTCONFIG/%d) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5040000000000023 "Old config value does not exist for (%TENANTCONFIG/%s)"
0x5040000000000024 "cdb_get failed for virtual-wires (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5050000000000001 "tenant creation failed for (%TENANT/%s) (%node/%d) (%ret/%d)"
0x5050000000000002 "tenant deletion failed for (%TENANT/%s) (%node/%d) (%ret/%d)"
0x5050000000000003 "Config Map creation failed for (%TENANT/%s) (%node/%d)"
0x5050000000000004 "Config Map deletion failed for (%TENANT/%s) (%node/%d)"
0x5050000000000006 "Timed out waiting for kvm NI helper job to complete (%PATH/%s), timeout (%timeout/%d)"
0x5050000000000008 "Secret creation failed for (%TENANT/%s) (%node/%d)"
0x5050000000000009 "Secret deletion failed for (%TENANT/%s) (%node/%d)"
0x5050000000000010 "Kvm helper job creation failed for (%TENANT/%s)"
0x5050000000000011 "Kvm helper job deletion failed for (%TENANT/%s)"
0x5050000000000012 "Kvm Helper job failed to de-allocate the resources for (%TENANT/%s)"
0x5050000000000013 "Custom Network Interface creation failed for (%TENANT/%s) reason (%error/%d)"
0x5050000000000015 "Tenant External Interface deletion failed for (%TENANT/%s)"
0x5050000000000016 "Tenant External Interface creation failed for (%TENANT/%s)"
0x5050000000000017 "Tenant not launched. Platform services not reported READY on node. (%TENANT/%s), (%node/%d)"
0x5050000000000018 "Tenant not launched since node is disabled. (%TENANT/%s), (%node/%d)"
0x5050000000000020 "Failed: PatchSvcPOD: (%type/%s) (%msg/%s)"
0x5050000000000022 "SvcPOD: (%type/%s) (%msg/%s)"
0x5050000000000024 "V6 prefix to mask operation failed. (%TENANT/%s)"
0x5050000000000025 "Tenant Size is not valid."
0x5050000000000026 "Cannot resize running tenant."
0x5050000000000027 "Tenant Cannot be resize to smaller size"
0x5050000000000028 "Tenant image pull backoff error - delete tenant pod. (%TENANT/%s), (%node/%d)"
0x5050000000000029 "Failed to generate tenant token for tenant: (%TENANT/%s), (%msg/%s)"
0x5050000000000030 "Failed to update ip rules for tenant on node (%TENANT/%s), (%node/%d)"
0x5050000000000031 "Restarting system tenant (%SYSTEMTENANT/%s) due to unhealthy event"
0x5050000000000032 "Tenant not launched. Failed to find the node in a partition (%TENANT/%s), (%node/%d)"
0x5050000000000033 "cmd failed (%cmd/%s) (%err/%s)"
0x5050000000000034 "Missing Tenant configurational data.(%TENANT/%s) (%error/%s)"
0x5050000000000035 "Failed to create (%type/%s) for ResourceManager"
0x5050000000000036 "Failed to delete (%type/%s) for ResourceManager"
0x5060000000000001 "Tenant configuration created. (%TENANT/%s)"
0x5060000000000002 "Tenant attempting to provision the resources. (%TENANT/%s) (%node/%d)"
0x5060000000000003 "Tenant attempting deploy. (%TENANT/%s) (%node/%d)"
0x5060000000000004 "Tenant deployed successfully (%TENANT/%s) (%node/%d)"
0x5060000000000005 "Tenant attempting to stop (%TENANT/%s) (%node/%d)"
0x5060000000000006 "Tenant attempting to delete (%TENANT/%s) (%node/%d)"
0x5060000000000007 "Failed to get tenant(s) health from server (%rest/%d) (%status/%s)"
0x5060000000000008 "Failed to get node(s) health from server (%rest/%d) (%status/%s)"
0x5060000000000009 "Attempting to setup Tenant to Platform Network channel (%TENANT/%s) (%node/%d)"
0x5060000000000010 "Tenant has unhealthy event (%event/%s). (%TENANT/%s) (%node/%d)"
0x5060000000000011 "Tenant disk attempting to resize. (%TENANT/%s) (%Size/%d)"
0x5060000000000012 "Tenant disk resized successfully (%TENANT/%s) (%node/%d)"
0x5060000000000013 "Tenant is running successfully (%TENANT/%s) (%node/%d)"
0x5060000000000014 "Tenant deployment failed (%TENANT/%s) (%node/%d) (%result/%s)"
0x5060000000000015 "Tenant configuration deleted. (%TENANT/%s)"
0x5060000000000016 "Tenant deleted successfully (%TENANT/%s) (%node/%d)"
0x5060000000000017 "Tenant stopped successfully (%TENANT/%s) (%node/%d)"
0x5060000000000018 "Unhealthy event for tenant (%TENANT/%s) during upgrade (%event/%s)"
0x5060000000000019 "Tenant to Platform Network channel setup done successfully (%TENANT/%s) (%node/%d)"
0x5060000000000021 "Tenant resource provisioning successful. (%TENANT/%s) (%node/%d)"
0x5060000000000022 "Using spec path: (%path/%s)"
0x5060000000000024 "Error parsing (%path/%s): (%error/%s)"
0x5060000000000025 "Unable to validate spec file (%path/%s)"
0x5060000000000028 "Flag (%flag/%s) does not exist, skipping."
0x5060000000000029 "Got error code (%code/%d) while checking existence of flag (%flag/%s)"
0x5060000000000030 "Chassis serial number is invalid - do not attempt tenant deploy. (%TENANT/%s) (%node/%d)"
0x5060000000000032 "(%msg/%s) (%TENANT/%s)"
0x5060000000000033 "(%msg/%s) (%TENANT/%s)"
0x5060000000000034 "Successfully update CPU for tenant (%TENANT/%s)"
0x5060000000000035 "Successfully update feature-flags for tenant (%TENANT/%s)"
0x5060000000000036 "Successfully update float IP for tenant (%TENANT/%s)"
0x5060000000000037 "Successfully update HA state for tenant (%TENANT/%s)"
0x5701000000000001 "License Service starting, (%version/%s) (%date/%s)"
0x5701000000000002 "License Service exiting."
0x5701000000000003 "cdb_get failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5701000000000004 "(%func/%s): Memory allocation failed (%TYPE/%s)"
0x5701000000000008 "(%func/%s): (%Execption/%s)"
0x5701000000000010 "(%func/%s): (%Error/%s)"
0x5701000000000011 "(%func/%s): Unable to create Mappi transaction (%ERRNO/%d) (%LASTERR/%s)"
0x5701000000000012 "(%func/%s): License update transaction failed. retrying (%count/%d)"
0x5701000000000013 "(%func/%s): Dossier is empty. Unable to fetch the system dossier"
0x5701000000000014 "(%func/%s): Unable to instantiate LicenseCdbHandler Object"
0x5701000000000015 "(%func/%s): Dossier instance creation failed"
0x5701000000000016 "(%func/%s): Dossier init failed"
0x5701000000000017 "(%func/%s): Getting Hashed Dossier failed"
0x5701000000000018 "(%func/%s): Getting Encrypted Dossier failed"
0x5701000000000019 "(%func/%s): Could not retrieve Chassis Reg Key from HAL"
0x5701000000000020 "(%func/%s): Unable to instantiate LicenseActivationClient Object"
0x5701000000000021 "(%func/%s): license can't be installed on Standby"
0x5701000000000022 "(%func/%s): (%message/%s)"
0x5701000000000023 "(%func/%s): Configuration set elem operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x5701000000000024 "(%func/%s): Configuration set elem2 operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x5701000000000025 "(%func/%s): Configuration delete operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x5701000000000026 "(%func/%s): Configuration get operation failed for (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x5701000000000027 "(%func/%s): Dossier CDB Update failed"
0x5701000000000028 "(%func/%s)Populating license details on startup"
0x5701000000000029 "(%func/%s)Populating license details failed on startup"
0x5701000000000030 "(%func/%s)License Installation is aborted"
0x5701000000000033 "(%func/%s): License file creation failed (%ERROR/%s)"
0x5701000000000037 "AUDIT - SERVICE_INDICATOR initializing system_license_service in FIPS 140-3 mode"
0x5701000000000038 "Maapi complete transaction failed for fflags update. (%error/%s) (%error_no/%d)"
0x5701000000000039 "License feature flags maapi_set_values failed. (%error/%s) (%error_no/%d)"
0x5701000000000040 "License feature flags cdb_set_values failed. (%error/%s) (%error_no/%d)"
0x5701000000000041 "License feature flags oper data set failed. (%error/%s) (%error_no/%d)"
0x5801000000000001 "API service gateway starting (%VERSION/%s) (%DATE/%s)"
0x5801000000000002 "UNUSED: API service gateway exiting"
0x5801000000000003 "Memory allocation failed (%TYPE/%s)"
0x5801000000000004 "Failed to read env variable (%VAR/%s)"
0x5801000000000006 "Rejecting vlan (%VLAN/%d) for tenant (%TENANT/%s)"
0x5801000000000007 "syncookie not supported message (%text/%s)"
0x5801000000000008 "No environment variable NETWORK_PREFIX, using default network prefix 10.1"
0x5801000000000009 "Env variable set (%VAR/%s) (%VALUE/%s)"
0x5801000000000010 "Error during tmstat operation. (%API/%s) (%TBLNAME/%s) (%error/%s)"
0x5801000000000011 "Waiting for self-signed certificates installation. (%MSG/%s)"
0x5801000000000012 "self-signed crypto keys installation completed"
0x5801000000000013 "API service gateway exiting"
0x5801000000000014 "Platform description: (%PLATFORM/%s) platform id: (%ID/%s) OS: (%OS/%s) memory: (%MEMSIZE/%s)"
0x5801000000000015 "SERVICE_INDICATOR initializing api-svc-gateway in FIPS 140-3 mode"
0x5803000000000001 "Read from cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000002 "Change Directory for cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000003 "Write to cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000004 "service-instance (%NAME/%s) not in cdb"
0x5803000000000005 "Delete from cdb failed: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000007 "service-instance (%NAME/%s) with nonzero submodule-id doesn't support (%FEATURE/%s)"
0x5803000000000008 "cdb_get: (%PATH/%s) (%TENANT/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000009 "Key Hash (%TYPE/%s) (%HASH/%s)"
0x5803000000000010 "Key header check failed (%HEADER/%s)"
0x5803000000000011 "Crypto key installation failed: (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000012 "Read from cdb failed for virtual-wire: (%PATH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5803000000000013 "Unexpected CONFD type for interface field (%INTERFACE/%s) (%FIELD/%s) (%EXPECTED/%d) (%ACTUAL/%d)"
0x5804000000000001 "Client Registration failed: (%ERRMSG/%s)"
0x5804000000000002 "Client Subscription failed: (%ERRMSG/%s)"
0x5804000000000003 "Client Deregistration failed: (%ERRMSG/%s)"
0x5804000000000004 "Platform-Tenant connection API: (%MSG/%s)"
0x5804000000000005 "tmstat error: (%ERRMSG/%s)"
0x5804000000000006 "Primary slot notification: (%ERRMSG/%s)"
0x5804000000000007 "UNUSED: Error in mssrequest: (%ERRMSG/%s)"
0x5804000000000008 "Transform Config request failed: (%ERRMSG/%s)"
0x5804000000000009 "Secret Config request failed: (%ERRMSG/%s)"
0x5804000000000010 "DDoS Vector Config request failed: (%ERRMSG/%s)"
0x5804000000000011 "DDoS Tunable Params request failed: (%ERRMSG/%s)"
0x5804000000000012 "Image version error: (%ERRMSG/%s)"
0x5804000000000013 "DDoS WL Config request failed: (%ERRMSG/%s)"
0x5804000000000014 "BDoS Params request failed: (%ERRMSG/%s)"
0x5804000000000015 "DDoS Vector Stats request failed: (%ERRMSG/%s)"
0x5804000000000016 "Error in request from tenant (%TENANT/%s) (%FUNC/%s) (%TYPE/%s)"
0x5804000000000017 "Vlan Config request failed: (%ERRMSG/%s)"
0x5804000000000018 "Stats query failed: (%ERRMSG/%s)"
0x5804000000000019 "Error while configuring vlanset: (%ERRMSG/%s)"
0x5804000000000020 "Error while fetching daglib: (%ERRMSG/%s)"
0x5804000000000021 "delete api_client (%tenant/%s)"
0x5804000000000024 "Incorrectly formatted peer, reject"
0x5804000000000025 "Timeout processing L2 listener requests"
0x5804000000000027 "No unit key was found in confd for tenant (%TENANT/%s)"
0x5804000000000029 "Unit key could not be decrypted (%TENANT/%s) (%HASH/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5804000000000030 "Unit key was not in a valid format (%TENANT/%s) (%HASH/%s)"
0x5804000000000031 "Unit key hash did not match (%TENANT/%s) (%HASH/%s) (%HASHCALC/%s)"
0x5804000000000032 "Processed primary slot notify request for tenant client (%tenant/%s)"
0x5804000000000033 "Processed image version notify request for tenant client (%tenant/%s)"
0x5804000000000034 "Processed register request for the tenant client (%tenant/%s)"
0x5804000000000035 "Processed deregister request for tenant client (%tenant/%s)"
0x5804000000000036 "Receive subscribe request from tenant client (%tenant/%s)"
0x5804000000000037 "End of tenant client subscription for the tenant (%tenant/%s)"
0x5804000000000038 "Fetching sdaglib (%size/%d)"
0x5804000000000039 "Receive listener request from tenant client (%tenant/%s) (%instid/%d) (%listeners_count/%d) (%mac_masq_listeners_count/%d)"
0x5804000000000040 "Listener request (%vlanname/%s) (%vlantag/%d) (%mac/%s) (%cmphash/%s) (%tunnel/%s) (%ipv6prefixlen/%d) (%portadjust/%s)"
0x5804000000000041 "Network manager reply returned error (%errorcode/%d) (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%op/%d)"
0x5804000000000042 "Network manager reply returned OK (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%op/%d)"
0x5804000000000043 "primary slot notification: Tenant client is not registered (%tenant/%s)"
0x5804000000000044 "primary slot notification: Tenant client not found in the tenant config database (%tenant/%s)"
0x5804000000000045 "primary slot notification: Failed to write primary slot info to ConfD for tenant client (%tenant/%s)"
0x5804000000000046 "image version notification: API client is not registered (%tenant/%s)"
0x5804000000000047 "image version notification: API client not found in the tenant config database (%tenant/%s)"
0x5804000000000048 "image version notification: Failed write of running image version (%tenant/%s)"
0x5804000000000049 "Client Registration failed: API client already registered (%tenant/%s)"
0x5804000000000050 "Client Registration failed: invalid API client (%tenant/%s)"
0x5804000000000051 "Client Registration failed: API client not found in the tenant config database (%tenant/%s)";
0x5804000000000052 "Client Deregistration failed: API client is not registered (%tenant/%s)"
0x5804000000000053 "Client Deregistration failed: invalid API client (%tenant/%s)"
0x5804000000000054 "Client Subscription failed: API client is not registered (%tenant/%s)"
0x5804000000000055 "Client Subscription failed: API client already subscribed (%tenant/%s)"
0x5804000000000056 "Client Subscription failed: Initial notification to tenant client failed for the tenant (%tenant/%s)"
0x5804000000000057 "Client Subscription: API client no longer subscribed (%tenant/%s)"
0x5804000000000058 "Client Subscription failed: API client no longer in the tenant config database (%tenant/%s)"
0x5804000000000059 "Client Subscription failed: Failed to send notification for the tenant (%tenant/%s)"
0x5804000000000060 "Tenant deletion: API client is not registered (%tenant/%s)"
0x5804000000000061 "Listener creation failed: API client is not registered (%tenant/%s)"
0x5804000000000062 "Error while fetching daglib: API client is not registered (%tenant/%s)"
0x5804000000000063 "Error while fetching feature info: (%ERRMSG/%s)"
0x5804000000000064 "tenant state notification: API client is not registered (%tenant/%s)"
0x5804000000000065 "tenant state notification: API client not found in the tenant config database (%tenant/%s)"
0x5804000000000066 "tenant state notification: Failed cdb write of tenant state (%tenant/%s)"
0x5804000000000067 "Receive notify tenant state request from API client (%tenant/%s)"
0x5804000000000068 "Vnap Config request failed: (%ERRMSG/%s)"
0x5804000000000069 "Timeout processing Vnap request"
0x5804000000000070 "tenant state notification: Failed cdb write of primary slot (%tenant/%s)"
0x5804000000000071 "Unable to get platform type/unsupported platform type (%TENANT/%d)"
0x5804000000000072 "Invalid token for the tenant (%TENANT/%s)"
0x5804000000000073 "Token validation has failed for tenant (%TENANT/%d) with error (%ERROR/%s)"
0x5804000000000074 "Failed to find tenant: (%TENANT/%s)"
0x5804000000000075 "(%LOG/%s)"
0x5804000000000078 "Platform key could not be decrypted (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5804000000000079 "Install crypt keys failed (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5804000000000080 "Listener mac masq request (%vlantag/%d) (%mac/%s) (%op/%d)"
0x5804000000000081 "Network manager mac masquerade reply returned error (%errorcode/%d) (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%mac/%s) (%op/%d)"
0x5804000000000082 "Network manager mac masquerade reply returned OK (%tenant/%s) (%tenantinstance/%d) (%vlantag/%d) (%mac/%s) (%op/%d)"
0x5804000000000083 "Timeout processing Dag grpc requests"
0x5804000000000084 "Dag gRPC request error: (%TENANT/%s) (%TYPE/%s)(%ERRMSG/%s)"
0x5804000000000085 "Dag gRPC interal error: (%TENANT/%s) (%TYPE/%s)(%ERRMSG/%s)"
0x5804000000000086 "gRPC Server failed to start, server port(s) will be inactive. (%TYPE/%s)"
0x5804000000000087 "Error occurred while processing listener request (%TENANT/%s) (%REASON/%s) (%VALUE/%s)"
0x5804000000000088 "Error fetching Virtual-wire: (%ERRMSG/%s)"
0x5804000000000089 "tenant state notification: API client not found in the tenant tmstat database (%tenant/%s)"
0x5804000000000095 "virtual-wire not found in tenant (%tenant/%s) (%vwire/%s)"
0x5804000000000097 "Virtual wire notification vlan (%vwire/%s) (%vlanid/%d)"
0x5804000000000098 "Virtual wire notification vnet_if (%vnet/%s) (%iftype/%s) (%did/%d)"
0x5804000000000101 "Tenant client deregistration in progress for: (%TENANTNAME/%s)"
0x5804000000000102 "Tenant client subscription in progress for: (%TENANTNAME/%s)"
0x5804000000000108 "Error in IPv4 inet_ntoa IP to string conversion"
0x5804000000000109 "Error in IPv6 inet_ntop IP to string conversion"
0x5805000000000001 "Error while registering message queues: (%ERRMSG/%s)"
0x5805000000000002 "Error in Message queues(rcv): unexpected fpgamgr msg (%ID/%d)"
0x5805000000000003 "Error in Message queues(rcv): fpga msg poll timeout"
0x5805000000000004 "Error in Message queues(rcv): fpga msg bad status (%STATUS/%s) (%TYPE/%s) (%MODE/%s)"
0x5805000000000005 "Bad return from Message Queue api (%FUNC/%s)"
0x5805000000000006 "Running network manager Message Queue client at (%ADDR/%s)"
0x5805000000000007 "Failure setting up FPGA Message Queue"
0x5805000000000008 "Failure sending fpgamgr ddos msg, message queue not initialized. (%THREAD/%d) (%ID/%d) (%MODE/%s)"
0x5805000000000009 "Failure deregistering FPGA Message Queue upon thread exit. (%THREAD/%d) (%ERR/%d)"
0x5805000000000010 "No payload received in reply from F5OS platform component - (%COMPONENT/%s). Invalid reply"
0x5805000000000011 "Failed to start Message Queue client. (%NAME/%s)"
0x5805000000000012 "Reply handling for (%COMPONENT/%s): no callback for client_name (%CLIENT/%s), tenant_name (%TENANT/%s), instance (%INSTANCE/%d)"
0x5901000000000001 "Datapath CP Proxy Starting. (%verion/%s) (%build_date/%s) (%msg_version_in_use/%d)"
0x5901000000000002 "Doorbell setup error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000003 "Epoll operations error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000004 "DMAA connection error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000005 "Tenant connection error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000006 "CDB error reading field (%TENANTNAME/%s) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000007 "CDB error reading field (%TENANTID/%u) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000008 "CDB error field is missing (%TENANTNAME/%s) (%FIELD/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000009 "Failed to find Tenant with Tenant Name (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000010 "Failed to find Tenant with Tenant ID (%TENANTID/%u) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000011 "Tenant ID missing from key value pairs"
0x5901000000000012 "CDB error writing component state field (%FIELD/%s) (%VALUE/%d) (%SLOT/%d) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000013 "Failed to read environment variable (%VARIABLE/%s)"
0x5901000000000014 "Failed to get Tenant Name for Tenant FD (%FD/%d)"
0x5901000000000015 "Failed to write Tenant Service Instance (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000016 "Tenant Name not set when writing Tenant Service Instance (%TENANTID/%u)"
0x5901000000000017 "Failed to delete Tenant Service Instance (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000018 "Failed to find internal Tenant record (%STAGE/%s) (%TENANTFD/%d) (%TENANTNAME/%s)"
0x5901000000000019 "Failed to find internal Tenant record (%STAGE/%s) (%TENANTFD/%d)"
0x5901000000000020 "Failure in waiting for DMA Agent to be ready (%STAGE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000021 "Failed to verify DMA Agent readiness. Exiting... (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000022 "Failed to read Control Plane keys. (%TENANTNAME/%s) (%SUBMODULE/%d) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000023 "Failed to find Tenant record by Tenant ID (%TENANTID/%u) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000024 "Failed to create event fd (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000025 "Configuration update error (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000026 "Subscription error (%TYPE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000027 "Failed to handle sep enable message from tenant (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000028 "Failed to handle sep disable message from tenant (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000029 "Error in reading generic response message (%TYPE/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000030 "Substring not found in hugepath conversion (%TENANTNAME/%s)"
0x5901000000000031 "Successfully handled operation. (%TYPE/%s)"
0x5901000000000032 "Successfully handled operation. (%TENANTNAME/%s) (%TYPE/%s)"
0x5901000000000033 "Successfully handled operation. (%TENANTNAME/%s) (%SUBMODID/%d) (%TYPE/%s)"
0x5901000000000034 "Service Instance Update Success. (%TENANTNAME/%s) (%DOSGRP/%s) (%SVCGRP/%s) (%SVCID/%d)"
0x5901000000000035 "Tenant fd attempt to double register (%TENANTNAME/%s) (%SUBMODULE/%d)"
0x5901000000000036 "A system tenant with this Service ID is already registered (%TENANTNAME/%s) (%SVCID/%d)"
0x5901000000000037 "Tenant Connection Information (%TYPE/%s) (%TENANTNAME/%s) (%SUBMODID/%d) (%MSG_VERSION/%d)"
0x5901000000000038 "Failed to handle operation. (%TENANTNAME/%s) (%SUBMODID/%d) (%TYPE/%s) (%ERRNOSTR/%s)"
0x5901000000000039 "Failed to update Service IDs (%OPERATION/%s) (%TENANTNAME/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x5901000000000040 "Duplicate tenant registration for name submodule pair (%TENANTNAME/%s) (%SUBMODULE/%d)"
0x5901000000000042 "Old tenant connection version in use (%TYPE/%s) (%VERSION/%d)"
0x5901000000000043 "No service ids available (%NAME/%s) (%SUBMODULE/%d)"
0x5901000000000045 "Confd Event Update: (%EVENT/%s) (%FROM/%s) (%TENANTNAME/%s) (%ATSE/%u) (%SUBMODULE/%d)"
0x5901000000000046 "Waiting to read initial tenant configuration."
0x5901000000000047 "Setting up doorbell socket (%PATH/%s)"
0x5901000000000048 "Invalid request type (%TYPE/%s) (%TENANTNAME/%s)"
0x5901000000000049 "Successfully read initial tenant configuration."
0x5901000000000050 "Failed to find Tenant record by Tenant Name (%TENANTNAME/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000051 "Failed to find doorbell FD associated with tenant FD (%TENANTFD/%d) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x5901000000000052 "Error in configuring the tenant. (%TENANTNAME/%s) (%TYPE/%s) (%ERRNOSTR/%s)"
0x5e01000000000001 "utils-agent starting (%VERSION/%s) (%DATE/%s)"
0x5e01000000000002 "utils-agent exiting"
0x5e01000000000003 "utils-agent error in thread-pool (%ERROR/%s)"
0x5e01000000000004 "utils-agent (%INFO/%s)"
0x5e01000000000005 "utils-agent file transfer error (%ERROR/%s)"
0x5e01000000000006 "utils-agent (%AUDITLOG/%s)"
0x5e01000000000007 "utils-agent (%VALIDATIONERROR/%s)"
0x5e01000000000008 "utils-agent file path is not allowed (%FILEPATH/%s) (%FILEOPERATION/%s)"
0x5e01000000000009 "utils-agent (%INFO/%s)"
0x5e01000000000010 "utils-agent (%STATUS/%s) (%FILEPATH/%s) (%ERRORNO/%d) (%ERROR/%s)"
0x5e01000000000011 "utils-agent : failed get value for cdb (%COMPONENT/%s) (%ERROR/%s) (%LASTERROR/%s) (%ERRORNO/%d)"
0x5e01000000000012 "utils-agent : failed get value for cdb (%COMPONENT/%s) (%ERROR/%s) (%LASTERROR/%s) (%ERRORNO/%d)"
0x5e01000000000013 "utils-agent (%ERROR/%s)"
0x5e01000000000014 "utils-agent (%INFO/%s)"
0x5e01000000000015 "utils-agent failed to move file from (%SOURCE/%s) (%DESTINATION/%s) with (%ERROR/%s)"
0x5e01000000000016 "utils-agent (%STATUS/%s) (%ERRORNO/%d)"
0x5e01000000000017 "SERVICE_INDICATOR initializing utils-agent in FIPS 140-3 mode"
0x5f01000000000001 "fips-service starting. (%version/%s) (%date/%s)"
0x5f01000000000002 "fips-service exiting"
0x5f01000000000003 "fips monitoring started"
0x5f01000000000005 "(%func/%s) Controller State is neither Active nor Standby. State = (%state/%s)"
0x5f01000000000006 "(%func/%s) (%error/%s)"
0x5f01000000000007 "Setting root account expiry-date is failed"
0x5f01000000000008 "Failed to lock/unlock Always-On Management(AOM) Command Menu"
0x5f01000000000009 "(%INFO/%s)"
0x5f01000000000010 "(%ERROR/%s) (%confd_stderror/%s) (%confd_lasterr/%s) (%confd_errno/%d)"
0x5f01000000000011 "FIPS error: Failed to reboot system, in function: (%func_name/%s), Error code (%ERRNO/%d)"
0x5f01000000000012 "FIPS error: Failed to read reboot counter from filesystem, Error code (%ERRNO/%d)"
0x5f01000000000013 "Read reboot count from file system: (%reboot_count/%d)"
0x5f01000000000014 "(%reboot_reason/%s)"
0x5f01000000000015 "FIPS error: Failed to reset reboot counter in filesystem, Error code (%ERRNO/%d)"
0x5f01000000000016 "FIPS error: Failed to sync fips directory, Error code (%ERRNO/%d)"
0x5f01000000000017 "FIPS error: Failed to sync fips error file (%file/%s), Error code (%ERRNO/%d)"
0x5f01000000000018 "FIPS: Entropy Health failure detected"
0x5f01000000000019 "FIPS: Error mode failure detected"
0x5f01000000000020 "FIPS: default handler triggered for file: (%file/%s)"
0x5f01000000000021 "FIPS License is installed/enabled, rebooting the system"
0x5f01000000000022 "FIPS License is disabled, rebooting the system"
0x5f01000000000023 "Failed to set cdb path (%path/%s) (%confderrno/%d) (%confdlasterr/%s)"
0x5f01000000000024 "cdb_get failed for getting oper data (%func/%s)(%operdatapath/%s) (%confderrno/%d) (%confdlasterr/%s)"
0x5f01000000000025 "Failed to open the file (%path/%s), Error code (%ERRNO/%d)"
0x5f01000000000026 "Reboot count file not created, Error code (%ERRNO/%d)"
0x5f01000000000027 "start session failed, Error code (%ERRNO/%d) (%confdlasterr/%s)"
0x5f01000000000028 "end session failed , Error code (%ERRNO/%d)"
0x5f01000000000029 "set (%element/%s) element failed (%ERRSTR/%s) (%PREVERRNO/%d) (%ERRNO/%d)"
0x5f01000000000030 "AUDIT - SERVICE_INDICATOR initializing fips-service in FIPS 140-3 mode"
0x5f01000000000033 "Failed to get partition id for partition (%name/%s)"
0x5f01000000000034 "failed to start CDB_OPERATIONAL data session => (%confd_strerror_confd_errno/%s)"
0x5f01000000000035 "failed to set cdb name space => (%confd_strerror_confd_errno/%s)"
0x5f01000000000036 "Failed to connect to ConfD"
0x5f01000000000037 "cdb_create failed for path (%path/%s) (%confderrno/%d) (%confdlasterr/%s)"
0x5f01000000000038 "Failed to reset integrity status (%confderrno/%d) (%confdlasterr/%s)"
0x6001000000000001 "LLDP daemon starting, (%version/%s) (%date/%s)"
0x6001000000000002 "LLDP daemon exiting."
0x6001000000000003 "LLDP Datapath Handler is NULL."
0x6001000000000004 "LLDPD Datapath Initialization failed."
0x6001000000000005 "eSetTimer Failed. LLDPD failed to start."
0x6001000000000006 "Non LLDP PDU received and dropped on interface: (%ifName/%s)."
0x6001000000000007 "LLDP Mgmt socket creation failed"
0x6001000000000008 "Building LLDP PDU failed: Unable to obtain SRC MAC for interface: (%ifName/%s)."
0x6001000000000009 "Building LLDP PDU failed: Unable to obtain System Serial Number."
0x6001000000000013 "Unexpected STP configuration. (%DESCRIPTION/%s)"
0x6001000000000014 "CDB get operation failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6001000000000015 "Unable to start confD session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6001000000000016 "LLDP neighbour update failed (%ifName/%s) and (%nbid/%s)"
0x6001000000000017 "LLDP neighbour remove failed (%ifName/%s) and (%nbid/%s)"
0x6001000000000018 "CDB set operation failed for (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6001000000000020 "SEP Client spec is Opened."
0x6001000000000021 "SEP library in ERR state."
0x6001000000000022 "Failed to receive packet."
0x6001000000000023 "PDU resource is out of memory."
0x6001000000000024 "Failed to send PDU packet."
0x6001000000000025 "(%phyPort/%d) is reserved and not used."
0x6001000000000031 "(%msg/%s)"
0x6001000000000033 "(%msg/%s) (%value/%s)"
0x6001000000000035 "ZMQ set up failed for send request."
0x6001000000000036 "Failed to mkdir for SEP Client Connection (%ERROR/%s) (%ERRNO/%d)"
0x6101000000000001 "UNUSED: Failed to open socket ds."
0x6101000000000002 "UNUSED: Failed to open socket ss."
0x6101000000000003 "UNUSED: Failed to open socket ods"
0x6101000000000004 "UNUSED: Failed to open socket od2."
0x6101000000000005 "UNUSED: Duplicate Interface object. (%key/%s)"
0x6101000000000006 "UNUSED: Interface object not found. (%key/%s)"
0x6101000000000007 "UNUSED: Duplicate trunk object. (%key/%s)"
0x6101000000000008 "UNUSED: Trunk object not found. (%key/%s)"
0x6101000000000009 "UNUSED: Duplicate trunk config member. (%key/%s)"
0x6101000000000010 "UNUSED: Try to Add an invalid Config Mbr Ignored! (%key/%s)"
0x6101000000000011 "UNUSED: Trunk config member object not found. (%key/%s)"
0x6101000000000012 "UNUSED: Trunk config member object not found. (%port/%d)"
0x6101000000000013 "UNUSED: Link Actor Out of Sync. (%key/%s)"
0x6101000000000014 "UNUSED: Link Partner Out of Sync. (%key/%s)"
0x6101000000000015 "UNUSED: iter_ret: unexpected op. (%path/%s) (%op/%d)"
0x6101000000000016 "UNUSED: initMsgHandler failed."
0x6101000000000017 "UNUSED: connect failed with no fd!"
0x6101000000000018 "UNUSED: Poll failed."
0x6101000000000019 "UNUSED: Too many poll failures, terminating."
0x6101000000000020 "UNUSED: Internal link is AVAILABLE. (%key/%s)"
0x6101000000000021 "UNUSED: Link added to aggregation. (%key/%s)"
0x6101000000000022 "UNUSED: Internal link is UNAVAILABLE. (%key/%s)"
0x6101000000000023 "UNUSED: Link removed from aggregation. (%key/%s)"
0x6101000000000024 "UNUSED: Interface (%key/%s) (%admin_status/%s) (%link_sattus/%s) (%duplex/%s) (%lacp_satte/%s)"
0x6101000000000025 "STPD starting. (%version/%s) (%date/%s)"
0x6101000000000026 "(%mode/%s) (%treenum/%d)] Root change failed: new root=(%newroot/%s) regionalRoot=(%rroot/%s)"
0x6101000000000027 "Error while adding the tree (%treeNum/%u): (%err/%s)"
0x6101000000000028 "Error while removing the tree (%treeNum/%u): (%err/%s)"
0x6101000000000029 "failed to set STP instance (%treeNum/%u) parameters: (%err/%s)"
0x6101000000000030 "init BpduMsgHandler failed. (%reason/%s) (%err/%d)"
0x6101000000000031 "failed to set bridge parameters: (%err/%s)"
0x6101000000000032 "Write MSTP config name to Confd is (%ret/%s)"
0x6101000000000033 "Failed to set RSTP global stats"
0x6101000000000034 "Failed to set RSTP ifc stats (%ifc/%s)"
0x6101000000000035 "Unsupported port role error (%role/%d)"
0x6101000000000036 "fatal error: (%err/%s)"
0x6101000000000037 "Failed to disable the port (%port/%u) in this spanning tree instance (%tree/%u): (%err/%s)"
0x6101000000000038 "Failed to enable the port (%port/%u) in this spanning tree instance (%tree/%u): (%err/%s)"
0x6101000000000039 "Failed to get spanning tree instance per-port parameters ((%tree/%u), (%port/%u)): (%err/%s)"
0x6101000000000040 "Failed to set spanning tree instance per-port parameters ((%tree/%u), (%port/%u)): (%err/%s)"
0x6101000000000041 "Caught a fatal exception: (%err/%s)"
0x6101000000000042 "Received duplicate ConfD create request for VLAN (%vlan/%s)"
0x6101000000000043 "Received ConfD modify request for nonexistent VLAN (%vlan/%s)"
0x6101000000000044 "Received ConfD object delete request for nonexistent VLAN (%vlan/%s)"
0x6101000000000045 "UNUSED: Unsupported port state error (%portstate/%d)"
0x6101000000000046 "stp_vlan_mbr references nonexistent VLAN (%name/%s)"
0x6101000000000047 "stp_vlan_mbr references nonexistent STP instance (%treeNum/%u)"
0x6101000000000048 "UNUSED: Failed to set MSTP global stats"
0x6101000000000049 "Failed to set MSTP instance stats (%inst/%d)"
0x6101000000000050 "Failed to set MSTP ifc stats (%inst/%d) (%ifc/%s)"
0x6101000000000051 "(%mode/%s) (%treeNum/%d)] Port Role change failed: (%interface/%s) = (%role/%s)"
0x6101000000000052 "(%mode/%s) (%treeNum/%d)] Port State change failed: (%interface/%s) = (%state/%s)"
0x6101000000000053 "(%info_str/%s)"
0x6101000000000054 "(%err_str/%s)"
0x6101000000000056 "Fatal error, application exit (%fatal_str/%s)"
0x6102000000000001 "UNUSED: Failed to load schemas from confd."
0x6102000000000002 "UNUSED: Confd connect(ds) failed. (%status/%d)"
0x6102000000000003 "UNUSED: Confd connect(ss) failed. (%status/%d)"
0x6102000000000004 "UNUSED: Confd subscribe(ss) failed. (%status/%d)"
0x6102000000000005 "UNUSED: Confd subscribe_done(ss) failed. (%status/%d)"
0x6102000000000006 "UNUSED: Confd connect(ods) failed. (%status/%d)"
0x6102000000000007 "UNUSED: Confd connect(od2) failed. (%status/%d)"
0x6102000000000008 "UNUSED: Confd connect(oss) failed. (%status/%d)"
0x6102000000000009 "UNUSED: Confd oper_subscribe(oss). (%path/%s) (%status/%d)"
0x6102000000000010 "UNUSED: Confd isubscribe_done(oss). (%status/%d)"
0x6102000000000011 "UNUSED: Confd start_session(od) failed. (%status/%d)"
0x6102000000000012 "UNUSED: Confd start_session(ods) failed. (%status/%d)"
0x6102000000000013 "UNUSED: Confd start_session(ds) failed. (%status/%d)"
0x6102000000000014 "UNUSED: Connected to Confd CBD."
0x6102000000000015 "UNUSED: Not connected to Confd CBD."
0x6102000000000016 "UNUSED: STPD receive info from Confd on trunk. (%name/%s)"
0x6102000000000017 "UNUSED: STPD receive info from Confd on interface. (%name/%s)"
0x6102000000000018 "Failed to write to cdb (%FIELD/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6102000000000019 "Failed to delete from cdb (%FIELD/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6102000000000020 "Invalid interface name"
0x6102000000000021 "UNUSED: cdb_get failed for interface (%INTERFACE/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6102000000000022 "UNUSED: cdb_cd failed for interface (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6102000000000023 "UNUSED: Unexpected vlan tag type (%INTERFACE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6102000000000024 "UNUSED: Stpd is restarting to failover to the other controller"
0x6102000000000025 "UNUSED: Unexpected mstp vlan tag type (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6102000000000026 "Error occurred in read_initial (%REASON/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6102000000000027 "Error occurred during cdb read (%REASON/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6102000000000028 "Error occurred during cdb set (%REASON/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6201000000000001 "internal error (%CODE/%d)"
0x6201000000000002 "internal event (%CODE/%d)"
0x6201000000000003 "NETWORK_PREFIX environment variable is not set; exiting"
0x6201000000000004 "unable to create the LOPD socket; exiting (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000005 "unable to set socket options on the LOPD socket; exiting (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000006 "unable to bind to the LOPD socket; exiting (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000007 "unable to open the LOP serial device; exiting (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000008 "unable to get LOP serial device attributes (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000009 "unable set LOP serial device attributes (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000010 "timed out while waiting for LOP response"
0x6201000000000011 "unable to poll for I/O events (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6201000000000012 "LOP daemon (LOPD) starting"
0x6201000000000013 "LOP daemon (LOPD) exiting"
0x6201000000000014 "using network prefix (%PREFIX/%s)"
0x6201000000000015 "out of memory to store LOP messages; exiting"
0x6201000000000016 "unable to determine the current log level"
0x6201000000000017 "response mismatch (%OBJECT/%s) (%EXPECTED/%s)"
0x6201000000000018 "response invalid; discarding it (%OBJECT/%s)"
0x6201000000000019 "invalid destination slot ID for outgoing GET/SET request; discarding it (%OBJECT/%s) (%SLOT_ID/%x)"
0x6201000000000020 "invalid destination slot ID for outgoing ALERT/NOTIFY request; discarding it (%OBJECT/%s) (%SLOT_ID/%x)"
0x6201000000000021 "console redirection is not connected; sending disconnection response"
0x6201000000000022 "LOP daemon LOPD starting (%VERSION/%s) (%DATE/%s)"
0x6201000000000023 "caught SIGHUP signal; shutting down"
0x6201000000000024 "caught SIGINT signal; shutting down"
0x6201000000000025 "caught SIGQUIT signal; shutting down"
0x6201000000000026 "caught SIGTERM signal; shutting down"
0x6201000000000027 "LOP daemon LOPD exiting"
0x6202000000000001 "unable to read from LOP serial device (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6202000000000002 "EOF reading from LOP serial device"
0x6202000000000003 "unable to write to LOP serial device; exiting (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6202000000000004 "received serial message from LOP exceeds buffer size; discarding it"
0x6202000000000005 "encapsulated serial data from LOP exceeds buffer size; discarding it"
0x6202000000000006 "encapsulated serial data from LOP contains unescaped flag byte; discarding it"
0x6202000000000007 "encapsulated serial data from LOP ends with escape byte; discarding it"
0x6202000000000008 "received serial message with unexpected object action; discarding it (%OBJECT/%s)"
0x6202000000000009 "LOP has disconnected from serial interface; exiting"
0x6202000000000010 "unable to de-encapsulate data from LOP; exiting"
0x6202000000000011 "received serial message too short; discarding it (%LEN/%u) (%EXPECTED/%u)"
0x6202000000000012 "received serial message with CRC mismatch; discarding it"
0x6202000000000013 "received serial message not OK; discarding it"
0x6202000000000014 "unable to encapsulate serial data for LOP; exiting"
0x6203000000000001 "unable to send message on the network; exiting (%ADDR/%s) (%PORT/%d) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6203000000000002 "unable to read message from the network (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6203000000000003 "zero length message read from the network"
0x6203000000000004 "unable to process received network message address; exiting"
0x6203000000000005 "received network message too short; discarding it (%LEN/%d) (%EXPECTED/%u)"
0x6203000000000006 "received network message with CRC mismatch; discarding it (%ADDR/%s) (%PORT/%d)"
0x6203000000000008 "unable to convert message address; discarding it (%ADDR/%s)"
0x6203000000000009 "failed to convert message address; discarding it (%ADDR/%s) (%ERRNO/%d) (%ERRNOSTR/%s)"
0x6701000000000001 "Blade is labeled incorrectly with (%LABEL/%s) instead of (%PROJ/%s)."
0x6701000000000002 "Blade is not currently labeled; label with (%PROJ/%s)."
0x6701000000000003 "Failed to parse HAL Chassis Inventory response."
0x6702000000000001 "ERROR: Failed to open (%FILE/%s) for writing."
0x6703000000000001 "ERROR: Failed to add blade to cluster via scaleup.yml."
0x6704000000000001 "ERROR: Failed to add controller to cluster via scaleup.yml."
0x6705000000000001 "ERROR: Failed to initiate openshift cluster."
0x6706000000000001 "ERROR: Execution of command (%COMMAND/%s) with error (%ERROR/%d)."
0x6706000000000002 "ERROR: Fork failed during execution of (%COMMAND/%s) with error (%ERROR/%d)."
0x6707000000000001 "ERROR: Failed to get Partition Config for (%ATTRIBUTE/%s) (%ERRNOSTR/%d) (%LASTERR/%s) (%ERRNO/%d)."
0x6801000000000001 "User Manager Starting. (%VERSION/%s) (%DATE/%s)"
0x6801000000000002 "User Manager Exiting, (%VERSION/%s) (%DATE/%s)"
0x6801000000000003 "Change password operation failed (%USER/%s)"
0x6801000000000004 "Set password operation failed (%USER/%s)"
0x6801000000000008 "Failed to start USER_MANAGER Health Monitor"
0x6801000000000009 "Failed to stop USER_MANAGER Health Monitor"
0x6801000000000013 "(%SRC_USER/%s) password applied to (%DEST_USER/%s)"
0x6801000000000015 "New user added (%USER/%s)"
0x6801000000000016 "User removed (%USER/%s)"
0x6801000000000017 "User added (%USER/%s)"
0x6801000000000018 "SERVICE_INDICATOR initializing user-manager in FIPS 140-3 mode"
0x6801000000000019 "AUDIT - SERVICE_INDICATOR (%USER/%s) (%MSG/%s)"
0x6801000000000020 "Authentication response truncated"
0x6801000000000021 "Problem with retrieving user - user not found"
0x6801000000000022 "Unable to retrieve primary group name"
0x6801000000000023 "Problem retrieving groups - malloc failed"
0x6801000000000024 "Error in run unable to set up"
0x6801000000000025 "ZMQ recv setup Failed."
0x6801000000000026 "ZMQ Registering end point Failed."
0x6801000000000027 "Un authorized user name (%user_name/%s) grpstrbuf (%grpstr/%s)"
0x6801000000000028 "Could not parse Request"
0x6801000000000029 "Failed to fork child process"
0x6801000000000030 "Failed to launch auth info process"
0x6801000000000031 "Failed to get authorization info"
0x6801000000000032 "Invalid authorized_key attempted for user."
0x6801000000000033 "Administrative user set-password for target user.(%USER/%s)(%TARGET/%s)"
0x6801000000000034 "Administrative user set-password succeeded for target user.(%USER/%s)(%TARGET/%s)"
0x6801000000000035 "set-password failed.(%USER/%s)(%MSG/%s)"
0x6801000000000036 "change-password started.(%USER/%s)"
0x6801000000000037 "change-password succeeded.(%USER/%s)"
0x6801000000000038 "change-password failed.(%USER/%s)(%MSG/%s)"
0x6802000000000001 "cdb_get failed for (%ATTRIBUTE/%s) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6802000000000002 "Could not write database (%OBJECT/%s) (%FIELD/%s) (%ERR/%s)"
0x6802000000000005 "Could not read database (%ERR/%s)"
0x6802000000000006 "cdb_exists failed, (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6802000000000007 "Could not write database (%OBJECT/%s) (%ERR/%s)"
0x6802000000000008 "Failed to complete Mappi transaction. (%ERRNO/%d) (%LASTERR/%s)"
0x6a01000000000001 "SNMP Service starting (%version/%s) (%date/%s)"
0x6a01000000000002 "SNMP Service exiting."
0x6a01000000000003 "ZMQ setup failed for send request."
0x6a01000000000004 "Path does not exist. (%path/%s)"
0x6a01000000000005 "Directory created successfully. (%dir/%s)"
0x6a01000000000006 "Failed to create directory: (%dir/%s)"
0x6a01000000000007 "System's IPv4 address isn't configured."
0x6a01000000000008 "System's IPv6 address isn't configured."
0x6a01000000000009 "Socket creation failed."
0x6a01000000000010 "IOCTL request failed."
0x6a01000000000011 "Memory allocation failed."
0x6a01000000000012 "User exist with old engine-id."
0x6a01000000000013 "(%msg/%s)"
0x6a01000000000014 "Community exist with old engine-id."
0x6a01000000000016 "Invalid fan instance: (%fan_instance/%d)"
0x6a01000000000017 "Failed to get fan request header size"
0x6a01000000000018 "Failed to send ZMQ request for fantray: (%msg_length/%d)"
0x6a01000000000019 "SERVICE_INDICATOR initializing snmp-service in FIPS 140-3 mode"
0x6a02000000000001 "Failed to create Mappi transaction. (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000002 "Maapi get operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000003 "Maapi set elem operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000004 "SNMPv2-MIB update transaction failed. (%count/%d)"
0x6a02000000000005 "CDB set operation failed. (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000006 "Failed to start the CDB session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000007 "CDB get operation failed. (%COMPONENT/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000008 "Received invalid cdb operation. (%op/%d) in FPGA data map update"
0x6a02000000000009 "Invalid xml tag to get element value. (%xmltag/%d)"
0x6a02000000000010 "CDB get operation failed for SNMP user name (%ERRNOSTR/%d) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000011 "CDB change directory operation failed for (%PATH/%s) (%ERRNOSTR/%d) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000012 "CDB get operation failed for (%USER/%s) (%ATTRIBUTE/%s) (%ERRNOSTR/%d) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000013 "Failed to complete Mappi transaction. (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000014 "Failed to do Maapi set values operation. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000015 "Maapi set values failed due to path error. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000016 "Received invalid cdb operation. (%op/%d)"
0x6a02000000000017 "Maapi set elem2 operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000018 "CDB set elem operation failed. (%COMPONENT/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000019 "Failed to do Maapi set elem. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)
0x6a02000000000020 "CDB delete failed for (%PATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000021 "CDB set values failed for (%PATH/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000022 "CDB set case failed for SNMP target (%TARGET/%s) (%CASE/%s) (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6a02000000000023 "Failed to delete Maapi. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000024 "Invalid xml tag in get (%xmltag/%d)"
0x6a02000000000025 "Received invalid cdb operation (%op/%d) in Firmware data map update"
0x6a02000000000026 "Invalid xml tag in Get (%xmltag/%d)"
0x6a02000000000027 "Maapi create operation failed. (%PATH/%s) (%ERRNO/%d) (%LASTERR/%s)"
0x6a02000000000028 "Engine-id value: Invalid ConfD type (%TYPE/%d)"
0x6f01000000000001 "System Service Starting, (%version/%s) (%date/%s)"
0x6f01000000000002 "System Service Exiting..."
0x6f01000000000003 "(%func/%s): (%message/%s)"
0x6f01000000000004 "(%func/%s): Peer Controller reboot trigger failed. (%controller/%d)"
0x6f01000000000005 "(%func/%s): Controller reboot trigger failed. (%controller/%d)"
0x6f01000000000006 "(%func/%s): Controller slot is not set in environment"
0x6f01000000000007 "(%func/%s): (%message/%s)"
0x6f01000000000008 "SW-MGMT socket error: (%message/%s)"
0x6f01000000000009 "(%func/%s): (%message/%s)"
0x6f01000000000013 "(%func/%s): (%path/%s) does not exist"
0x6f01000000000014 "(%func/%s): (%dir/%s) created successfully"
0x6f01000000000015 "(%func/%s): failed to create: (%dir/%s)"
0x6f01000000000017 "Unable to fetch from confd (%path/%s) (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)"
0x6f01000000000018 "(%msg/%s)"
0x6f02000000000001 "(%func/%s): unsupported action (%tag/%d)"
0x6f02000000000002 "(%func/%s): Invalid Controller status. (%status/%d) and (%req_reboot/%s)"
0x6f02000000000003 "Unable to fetch from confd (%path/%s) (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)"
0x6f02000000000004 "Failed to create transaction (%confd_strerror_confd_errno/%s) (%confd_lasterr/%s)"
0x6f02000000000005 "Failed to find CDB component (%COMPONENT/%s)"
0x6f02000000000006 "cdb_set failed for (%PATH/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x6f02000000000007 "Failed to start confd session. (%ERROR/%s) (%LASTERR/%s) (%ERRNO/%d)"
0x7901000000000003 "Restricted SSH traffic from ip: (%IP_NETW/%s)"
0x7901000000000004 "Add rule exist in DB with (%RULE_NAME/%s), (%IP_ADD/%s)"
0x7901000000000007 "SSH Rule Info: (%Name/%s), (%ip/%s), (%port/%d), (%is_ipv4/%d)"
0x7901000000000008 "Add ssh access denial rule: (%RULE_NAME/%s)"
0x7901000000000009 "Add ssh access allowed IP rule: (%RULE_NAME/%s), (%IP_ADD/%s)"
0x7901000000000010 "Delete ssh access denial rule: (%RULE_NAME/%s)"
0x7901000000000011 "Delete ssh access allowed IP rule: (%RULE_NAME/%s), (%IP_ADD/%s)"
0x7901000000000022 "Firewall Manager starting. (%version/%s) (%date/%s)"
0x7901000000000023 "Firewall rule added:(%Name/%s), (%ip/%s), (%port/%d)"
0x7901000000000024 "Firewall rule deleted:(%Name/%s), (%ip/%s), (%port/%d)"
0x7901000000000025 "Default rule added:(%Name/%s), (%port/%d)"
0x7901000000000026 "Default rule deleted:(%Chain_Name/%s), (%port/%d)"
0x7b01000000000001 "Failed to read input crl file. (%filename/%s)"
0x7b01000000000002 "Failed to write crl file: (%path/%s)"
0x7b01000000000003 "File cannot be opened (%file/%s)"
0x7b01000000000004 "OpenSSL public key failed."
0x7b01000000000005 "Key/Certificate mismatch (%file1/%s) (%file2/%s)"
0x7b01000000000006 "Failed to open key file (%name/%s)"
0x7b01000000000007 "Failed to read key file (%name/%s)"
0x7b01000000000008 "OpenSSL ASN1_INTEGER_new failed to allocate memory."
0x7b01000000000009 "OpenSSL ASN1_STRING_set_default_mask_asc failed."
0x7b01000000000010 "OpenSSL BIO_new_fp failed allocate memory."
0x7b01000000000011 "OpenSSL BIO_new failed allocate memory."
0x7b01000000000012 "OpenSSL BIO_write_filename failed write (%name/%s)."
0x7b01000000000013 "OpenSSL BIO_write failed to write CSR."
0x7b01000000000014 "OpenSSL BN_GENCB_set failed to generate callback."
0x7b01000000000015 "OpenSSL BN_new failed allocate memory."
0x7b01000000000016 "OpenSSL BN_pseudo_rand failed."
0x7b01000000000017 "OpenSSL BN_set_word failed."
0x7b01000000000018 "OpenSSL BN_to_ASN1_INTEGER failed."
0x7b01000000000019 "OpenSSL certificate key is nil."
0x7b01000000000020 "OpenSSL CONF_modules_load failed."
0x7b01000000000021 "Certificate Request city (%city/%s)."
0x7b01000000000022 "Certificate Request country (%country/%s)."
0x7b01000000000023 "Certificate Request email (%email/%s)."
0x7b01000000000024 "Certificate Request name (%name/%s)."
0x7b01000000000025 "Certificate Request organization (%organization/%s)."
0x7b01000000000026 "Certificate Request organizational unit (%unit/%s)."
0x7b01000000000027 "Certificate Request region (%state/%s)."
0x7b01000000000028 "Certificate Request version (%version/%d)."
0x7b01000000000029 "OpenSSL do_sign_init failed."
0x7b01000000000030 "OpenSSL EC_GROUP_new_by_curve_name failed."
0x7b01000000000031 "OpenSSL EC_KEY_generate_key failed."
0x7b01000000000032 "OpenSSL EC_KEY_new failed to allocate memory."
0x7b01000000000033 "OpenSSL EC_KEY_set_group failed."
0x7b01000000000034 "OpenSSL_malloc failed to allocate bytes (%size/%u)"
0x7b01000000000035 "OpenSSL X509_name parse error."
0x7b01000000000036 "OpenSSL NCONF_get_section failed."
0x7b01000000000037 "OpenSSL NCONF_get_string failed to find file (%file/%s)"
0x7b01000000000038 "OpenSSL NCONF_load failed for file (%file/%s)"
0x7b01000000000039 "OpenSSL NCONF_new failed to allocate memory."
0x7b01000000000040 "OpenSSL OBJ_create failed for (%name/%s)."
0x7b01000000000041 "OpenSSL OBJ_sn2nid failed."
0x7b01000000000042 "OpenSSL PEM_read_bio_X509_REQ failed read csr."
0x7b01000000000043 "Failed to read crl. Invalid PEM format crl input"
0x7b01000000000044 "OpenSSL PEM_read_bio_PrivateKey failed read key (%file/%s)"
0x7b01000000000045 "OpenSSL PEM_write_bio_ECPrivateKey failed to write key."
0x7b01000000000046 "OpenSSL PEM_write_bio_RSAPrivateKey failed to write key."
0x7b01000000000047 "OpenSSL PEM_write_bio_X509_REQ failed write certificate request."
0x7b01000000000048 "OpenSSL RSA_generate_key_ex failed."
0x7b01000000000049 "OpenSSL RSA_new_method failed."
0x7b01000000000050 "OpenSSL Subject not starting with backslash."
0x7b01000000000051 "OpenSSL X509_get_pubkey failed to get public key."
0x7b01000000000052 "OpenSSL X509_gmtime_adj failed."
0x7b01000000000053 "OpenSSL X509_NAME_add_entry_by_NID failed for (%name/%s)."
0x7b01000000000054 "OpenSSL X509_Name_new failed to allocate memory."
0x7b01000000000055 "OpenSSL X509_new failed to allocate memory."
0x7b01000000000056 "OpenSSL X509_REQ_get_pubkey failed to get public key."
0x7b01000000000057 "OpenSSL X509 create CSR failed."
0x7b01000000000058 "OpenSSL X509_REQ_new failed to allocate memory."
0x7b01000000000059 "OpenSSL X509_REQ_set_pubkey failed."
0x7b01000000000060 "OpenSSL X509_REQ_set_subject_name failed."
0x7b01000000000061 "OpenSSL X509_REQ_set_version failed."
0x7b01000000000062 "OpenSSL X509_REQ_verify failed to verify signature."
0x7b01000000000063 "OpenSSL X509_set_issuer_name failed."
0x7b01000000000064 "OpenSSL X509_set_pubkey failed to set public key."
0x7b01000000000065 "OpenSSL X509_set_serialNumber failed."
0x7b01000000000066 "OpenSSL X509_sign failed."
0x7b01000000000067 "OpenSSL X509_STORE_new failed allocate memory."
0x7b01000000000068 "OpenSSL X509_time_adj_ex failed."
0x7b01000000000069 "OpenSSL X509V3_EXT_add_nconf failed to load extension (%name/%s)."
0x7b01000000000070 "OpenSSL X509V3_EXT_REQ_add_nconf failed to load extension (%name/%s)."
0x7b01000000000071 "OpenSSL X509_STORE_set_default_paths failed."
0x7b01000000000072 "(%message/%s)"
0x7b01000000000073 "Saved Certificate Authority (CA) Bundle file: (%name/%s)"
0x7b01000000000074 "Unable to save Certificate Authority (CA) Bundle file: (%name/%s) (%errnum/%d)"
0x7b01000000000075 "OpenSSL Keys and Certificates must start with -----BEGIN ..."
0x7b01000000000079 "Unable to save HTTPD configuration file. (%name/%s) (%errnum/%d)"
0x7b01000000000081 "Saved HTTPD configuration file. (%name/%s)"
0x7b01000000000082 "CA-BUNDLE intput data is formatted with the wrong number of dashes."
0x981000000000001 "DIAG_AGENT unable to get platform hal host-type"
0x981000000000002 "DIAG_AGENT unable to get platform hal slot number"
0x981000000000003 "DIAG_AGENT unable to get platform hal slot id"
0x981000000000004 "DIAG_AGENT unable to get platform hal node name"
0x981000000000005 "DIAG_AGENT unable to get platform hal information" error=%s
0x981000000000006 "DIAG_AGENT waiting for HAL service to be ready"
0x981000000000007 "DIAG_AGENT timeout waiting for HAL service to be ready"
0x981000000000008 "DIAG_AGENT unable to open db file" file=%s
0x981000000000009 "DIAG_AGENT unable to create ZMQ publisher" error=%s
0x98100000000000a "DIAG_AGENT unable to start ZMQ publisher" error=%s
0x98100000000000b "DIAG_AGENT failed to initialize diagnostic agent" error=%s
0x98100000000000c "DIAG_AGENT failed to initialize component container" error=%s
0x98100000000000d "DIAG_AGENT failed to initialize criteria container" error=%s
0x98100000000000e "DIAG_AGENT TC ZMQ Input Message Router - Not configured"
0x98100000000000f "DIAG_AGENT failed to communicate with platform monitor service"
0x981000000000010 "diag-agent starting" version=%v
0x981000000000011 "Unable to query initial chassis module present status" err=%v
0x981000000000012 "Unable to query initial PSU present status" err=%v
0x981000000000013 "Unable to initialize PSU manager" err=%v
0x981000000000014 "Unable to query LOP CC Arbitration state" err=%v
0x981000000000015 "Unable to reset PSU manager component" err=%v component=%v
0x981000000000016 "Error while processing blade manager event" err=%v kind=%v
0x981000000000017 "Unable to discover blade, unknown slot" slotId=%v
0x981000000000018 "Unable to query initial blade present status" err=%v
0x981000000000019 "Unable to evaluate blade state" err=%v blade=%v
0x98100000000001a "Unable to create blade attribute" err=%v component=%v key=%v
0x98100000000001b "Unable to stop profile" err=%v name=%v profile=%v
0x98100000000001c "Error while waiting to profile complete" err=%v name=%v profile=%v
0x98100000000001d "Unable to abort profile" err=%v name=%v profile=%v
0x98100000000001e "Unable to unload profile" err=%v name=%v profile=%v
0x98100000000001f "Blade profile configure error" name=%v missedConfig=%v
0x981000000000020 "Unable to launch profile" err=%v profile=%v
0x981000000000021 "Unable to get valid states for binary alert" objId=%v subObj=%v slotId=%v bit=%v state=%v states=%v
0x981000000000022 "Unable to get valid states for analog alert" objId=%v subObj=%v slotId=%v state=%v states=%v
0x981000000000023 "Unable to update attribute" err=%v component=%v attribute=%v value=%v severity=%v
0x981000000000024 "BladeManager: Unable to process blade investigation" err=%v
0x981000000000025 "Unable to update chassis module present status" err=%v component=%v present=%v
0x981000000000026 "Unable to set value in Confd" err=%v keypath=%v
0x981000000000027 "Unable to start session in Confd" err=%v keypath=%v
0x981000000000028 "Unable to get value list from Confd" err=%v keypath=%v
0x981000000000029 "Unable to get value from Confd" err=%v keypath=%v
0x98100000000002a "Unable to get key from dictionary" err=%v key=%v
0x98100000000002b "Unable to get the firmware data" err=%v
0x98100000000002c "Unable to activate PSU manager" err=%v
0x98100000000002d "Unable to start PSU redundancy" err=%v
0x98100000000002e "Unable to activate blade manager" err=%v
0x98100000000002f "Unable to clear alarms" err=%v
0x981000000000030 "Unable to deactivate blade manager" err=%v
0x981000000000031 "Unable to stop PSU redundancy" err=%v
0x981000000000032 "Unable to deactivate PSU manager" err=%v
0x981000000000033 "Unable to create monitor input" err=%v
0x981000000000034 "Unable to notify firmware update status to Confd" node=%v
0x981000000000035 "Unknown LCD sensor" sensor=%v
0x981000000000036 "Unable to find component" component=%v
0x981000000000037 "Unable to notify firmware update status as Confd is standby" node=%v
0x982000000000001 "Verifying Monitoring Agent is up and running" address=%v
0x982000000000002 "Verifying Platform HAL is up and running" address=%v
0x982000000000003 "Verifying Platform FWU is up and running" address=%v
0x982000000000004 "Loading Task" task=%v name=%v profile=%v
0x982000000000005 "Cancelling Task" task=%v name=%v profile=%v
0x982000000000006 "Running Task" task=%v name=%v profile=%v mode=%v
0x982000000000007 "Completed Task" task=%v name=%v profile=%v mode=%v
0x982000000000008 "Skipping Tasks" task=%v
0x982000000000009 "Fake Tasks running at diag-agent" task=%v
0x98200000000000a "Fake Tasks stopped at diag-agent" task=%v
0x98200000000000b "Information event generated at diag-agent" event=%v severity=%s area=%s task=%s profile=%s
0x98200000000000d "Component Attribute Changed" component=%v attribute=%v severity=%v value=%v
0x98200000000000e "Component Health Changed" component=%v severity=%v
0x98200000000000f "unable to initialize firmware monitor" err=%v
0x982000000000010 "unable to get drive slot from platform HAL" err=%v
0x982000000000011 "unable to initialize LOP binary alert handler" err=%v
0x982000000000012 "unable to update LOP binary alert handler attribute" objectId=%v subObject=%v slotId=%v component=%v attribute=%v err=%v
0x982000000000013 "unable to initialize LOP analog alert handler" err=%v
0x982000000000014 "unable to refresh LOP analog alert handler" err=%v
0x982000000000015 "unable to update LOP analog alert handler attribute" component=%v attribute=%v err=%v
0x982000000000016 "unable to abort profile" name=%v err=%v
0x982000000000017 "unable to unload profile" name=%v err=%v
0x982000000000018 "Error event generated at diag-agent" event=%v severity=%s area=%s task=%s profile=%s
0x982000000000019 "Warning event generated at diag-agent" event=%v severity=%s area=%s task=%s profile=%s
0x98200000000001a "Component Attribute Changed" component=%v attribute=%v severity=%v value=%v
0x98200000000001b "Component Attribute Changed" component=%v attribute=%v severity=%v value=%v
0x98200000000001c "Component Health Changed" component=%v severity=%v
0x98200000000001d "Component Health Changed" component=%v severity=%v
0x98200000000001e "Service monitor error" service=%v error=%v
0x98200000000001f "Error encountered during DB cleanup at startup" error=%s
0xf010000000000002 "unexpected tag: (%tag/%d)"
0xf010000000000004 "confd_register_trans_cb failed "
0xf010000000000005 "confd_register_range_data_cb failed "
0xf010000000000006 "pthread_create[config] %m"
0xf010000000000007 "pthread_create[op_data] %m"
0xf010000000000008 "fopen: /var/log_controller/vcc-ha-hal %m"
0xf010000000000009 "hal_init() failed "
0xf010000000000010 "Unable to look up local CC slot number from HAL..retrying "
0xf010000000000011 "invalid slot #: (%slot_num/%u)"
0xf010000000000013 "confd_load_schemas failed[]...sleeping (%inet_ntoa_odtaaddrsin_addr/%s)"
0xf010000000000014 ": pthread_mutex_init[config]: (%argv_0/%s)"
0xf010000000000015 ": pthread_cond_init[config]: (%argv_0/%s)"
0xf010000000000016 ": pthread_mutex_init[op data]: (%argv_0/%s)"
0xf010000000000017 ": Unable to start ConfD threads. (%argv_0/%s)"
0xf010000000000018 "hal_get_ha_active() failed "
0xf010000000000019 "pthread_mutex_lock %m"
0xf010000000000020 "pthread_mutex_unlock %m"
0xf010000000000021 "malloc failed"

Log Message Details

0x0010000000000001 : "cdb_get failed to get node data((%RET/%d) (%ERRNOSTR/%s) (%LASTERR/%s) (%ERRNO/%d))"

level: LOG_ERR
conditions:
  • The ConfD database has not started or is inoperable.
impact:
  • QKView will not be able to collect data from peer blades or standby devices.
recommended_action:
  • Ensure the partition-manager container is running and that the ConfD database is healthy.

0x0010000000000003 : "Found invalid Peer IP (%PEERIP/%s)"

level: LOG_ERR
conditions:
  • Peer IP is not reachable or is missing.
impact:
  • Unable to collect QKView data from peers.
recommended_action:
  • Wait and try again.

0x0010000000000004 : "Peer Subnet not found: PARTITION_SUBNET"

level: LOG_ERR
conditions:
  • Unable to reach peer subnet.
impact:
  • Unable to collect QKView data from peers.
recommended_action:
  • Wait and try again.

0x0010000000000005 : "Found invalid Peer Subnet (%PEERNET/%s)"

level: LOG_ERR
conditions:
  • Peer subnet is invalid.
impact:
  • Unable to collect QKView data from peers.
recommended_action:
  • Wait and try again.

0x0010000000000007 : "Error creating temp peer file: (%FILENAME/%s) (%ERRNUM/%d)"

level: LOG_ERR
conditions:
  • Unable to create a temporary file at the given location.
impact:
  • Unable to collect QKView data from peers.
recommended_action:
  • Check disk status.

0x0010000000000008 : "Error writing temp peer file: (%FILENAME/%s)"

level: LOG_ERR
conditions:
  • Disk may be full, or there could be file permissions errors.
impact:
  • Unable to collect QKView data from peers.
recommended_action:
  • Check disk status.

0x0010000000000009 : "Error copying temp peer file: (%FILENAME/%s)"

level: LOG_ERR
conditions:
  • Disk may be full, or there could be file permission errors.
impact:
  • Unable to collect QKView data from peers.
recommended_action:
  • Check disk status.

0x0010000000000010 : "Partition Blades Daemon starting. (%version/%s) (%log/%s) (%date/%s)"

level: LOG_NOTICE
conditions:
  • Peer watcher daemon is starting.
impact:
  • None.
recommended_action:
  • None.

0x1001000000000001 : "BCM56XXD driver error: All L2 stash entries exhausted: vlan_id=(%vlan_id/%d)"

level: LOG_ERR
conditions:
  • All L2 stash entries exhausted for specified VLAN ID.
impact:
  • None
recommended_action:
  • Restart the container or reboot the system controller.

0x1001000000000002 : "BCM56XXD driver error: Cannot find VLAN: vlan_id=/, unit=(%vlan_id/%d) (%cvid/%d) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Cannot find VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000003 : "BCM56XXD SDK error: Error adding l2 entry for vlan_id=, unit=(%vlan_id/%d) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Error adding L2 entry for the specified VLAN ID.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000004 : "BCM56XXD SDK error: Error initializing L2 stash free list"

level: LOG_ERR
conditions:
  • Unable to initialize L2 free list.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000005 : "BCM56XXD driver error: Invalid timer_val = (%timer_val/%d)"

level: LOG_ERR
conditions:
  • Invalid timer value.
impact:
  • None
recommended_action:
  • None

0x1001000000000006 : "BCM56XXD SDK error: Error setting L2 age timer"

level: LOG_ERR
conditions:
  • Unable to set up L2 age timer.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000007 : "BCM56XXD SDK error: Error adding l2 entry for vlan_id=, port_id=(%vlan_id/%d) (%sc_physport/%d)"

level: LOG_ERR
conditions:
  • Unable to add L2 entry for VLAN ID.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000008 : "BCM56XXD driver error: Error adding l2 entry in stash: vlan_id=, port_id=(%vlan_id/%d) (%sc_physport/%d)"

level: LOG_ERR
conditions:
  • Unable to add L2 entry.
impact:
  • None
recommended_action:
  • None

0x1001000000000009 : "BCM56XXD SDK error: Error adding l2 entry: unit=, trunk_id=(%i_unit/%d) (%sc_ifname/%d)"

level: LOG_ERR
conditions:
  • Unable to add L2 entry.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000010 : "BCM56XXD driver error: Error adding l2 entry in stash: vlan_id=, interface =(%vlan_id/%d) (%sc_ifname/%d)"

level: LOG_ERR
conditions:
  • Unable to add L2 entry in stash.
impact:
  • None
recommended_action:
  • None

0x1001000000000011 : "BCM56XXD driver error: Error adding l2 entry in stash: vlan_id=, trunk_id=(%vlan_id/%d) (%trunk_trunk_id/%d)"

level: LOG_ERR
conditions:
  • Unable to add L2 entry in stash.
impact:
  • None
recommended_action:
  • None

0x1001000000000012 : "BCM56XXD SDK error: Error: reading L2 entry : (%idx/%d) (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to read L2 entry.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000013 : "BCM56XXD SDK error: failed constructing l2_forward result for unit : entry (%dev_unit/%d) (%idx/%d)"

level: LOG_ERR
conditions:
  • Unable to construct forwarding result for the unit.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000014 : "BCM56XXD SDK error: Error deleting l2 entry from hardware: vlan_id=(%vlan_id/%d)"

level: LOG_ERR
conditions:
  • Unable to delete L2 entry from hardware.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000015 : "BCM56XXD driver error: Error deleting l2 entry from stash: vlan_id=(%vlan_id/%d)"

level: LOG_ERR
conditions:
  • Unable to delete L2 entry from stash.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000016 : "BCM56XXD SDK error: Error flushing l2 table for port_id=(%port/%d)"

level: LOG_ERR
conditions:
  • Unable to flush L2 table.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000017 : "BCM56XXD driver error: Error restoring static l2 entries for port_id= on unit .(%port/%d) (%i_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to restore static L2 entries for the specified port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000018 : "BCM56XXD SDK error: Error flushing l2 table for unit=, vid=, tid=(%unit/%d) (%vid/%d) (%tid/%d)"

level: LOG_ERR
conditions:
  • Unable to flush L2 table.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000019 : "BCM56XXD SDK error: Error flushing l2 table for unit=, trunk_id=(%i_unit/%d) (%trunk_trunk_id/%d)"

level: LOG_ERR
conditions:
  • Unable to flush L2 table.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000020 : "BCM56XXD driver error: Error restoring static l2 entries: unit=, trunk_id=(%i_unit/%d) (%trunk_trunk_id/%d)"

level: LOG_ERR
conditions:
  • Unable to restore static L2 entries.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000021 : "BCM56XXD SDK error: Error retrieving vlan bitmaps unit=, vid=(%unit/%d) (%ventry_vid/%d)"

level: LOG_ERR
conditions:
  • Unable to retrieve VLAN bitmaps.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000022 : "BCM56XXD driver error: Vlan soft struct does not exist(%vid/%d)"

level: LOG_ERR
conditions:
  • VLAN software structure does not exist.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000023 : "BCM56XXD SDK error: Error retrieving rate filter, (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Error retrieving rate filter.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000024 : "BCM56XXD SDK error: Error setting rate filter, (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set rate filter.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000025 : "BCM56XXD SDK error: Error setting port learning mode, (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set port learning mode.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000026 : "BCM56XXD SDK error: Error clearing L2 entries for the port, (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to clear L2 entries for the port.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000027 : "BCM56XXD driver error: Error getting IO expander for :MODPRS(%sw_cfg_u_pcfg_p_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to get IO expander.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000028 : "BCM56XXD driver error: Error getting IO expander for :INT(%sw_cfg_u_pcfg_p_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to get IO expander.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000029 : "BCM56XXD driver error: Error getting IO expander for :LP(%sw_cfg_u_pcfg_p_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to get IO expander.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000030 : "BCM56XXD driver error: Error getting IO expander initialization data array"

level: LOG_ERR
conditions:
  • Unable to initialize IO expander.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000031 : "BCM56XXD driver error: Error getting IO expander initialization data count"

level: LOG_ERR
conditions:
  • Unable to initialize IO expander.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000032 : "BCM56XXD info: STUBBED "

level: LOG_INFO
conditions:
  • Stubbed.
impact:
  • None
recommended_action:
  • None

0x1001000000000033 : "BCM56XXD driver error: Error configuring and starting LED uprocessors"

level: LOG_ERR
conditions:
  • Unable to configure or start LED processors.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000034 : "BCM56XXD driver error: Error applying default port tuning to unit port (%unit/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Unable to apply default port tuning.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000035 : "BCM56XXD info: I2C mux reset completed, dev:, IO Exp addr:0x.(%FUNCTION/%s) (%HOST_I2C_DEVNAME/%s) (%IO_EXPDR_1/%x)"

level: LOG_INFO
conditions:
  • I2C mux reset completed.
impact:
  • None
recommended_action:
  • None

0x1001000000000036 : "BCM56XXD driver error: Error resetting mux and IO expander (%whatc_str/%s)"

level: LOG_ERR
conditions:
  • Unable to reset MUX and IO expander.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000037 : "BCM56XXD SDK error: SDK error deleting l2 BPDU entry: (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to delete L2 BPDU entry.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000038 : "BCM56XXD SDK error: SDK error configuring l2 BPDU entry: (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to configure L2 BPDU entry.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000039 : "BCM56XXD driver error: ip hash field group does not support an ODD number of HSBs.(%totalHSB/%d)"

level: LOG_ERR
conditions:
  • IP hash field group does not support an odd number of high speed bridges (HSBs).
impact:
  • None
recommended_action:
  • None

0x1001000000000040 : "BCM56XXD driver error: IFP port init failed (No device)"

level: LOG_ERR
conditions:
  • Unable to initialize IFP port.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000041 : "BCM56XXD info: Invalid Ifp redirect params"

level: LOG_INFO
conditions:
  • Invalid parameters to IFP redirection.
impact:
  • None
recommended_action:
  • None

0x1001000000000042 : "BCM56XXD info: Created global cos user entry .(%dev_field_entry_cos/%d)"

level: LOG_INFO
conditions:
  • Created global CoS user entry.
impact:
  • None
recommended_action:
  • None

0x1001000000000043 : "BCM56XXD info: Deleted global cos user entry .(%dev_field_entry_cos/%d)"

level: LOG_INFO
conditions:
  • Deleted global CoS user entry.
impact:
  • None
recommended_action:
  • None

0x1001000000000044 : "BCM56XXD SDK error: Error calling soc_cm_mdebug_init"

level: LOG_ERR
conditions:
  • Unable to initialize the debug manager.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000045 : "BCM56XXD SDK error: Error calling soc_mdebug_init"

level: LOG_ERR
conditions:
  • Unable to initialize the debug manager.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000046 : "BCM56XXD SDK error: Error updating debug flag (lx) for module (%debug_level/%s) (%mod/%s)"

level: LOG_ERR
conditions:
  • Unable to update debug flag for module.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000047 : "BCM56XXD SDK error: Error calling bcm_mdebug_init"

level: LOG_ERR
conditions:
  • Unable to initialize the debug manager.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000048 : "BCM56XXD SDK error: Error fetch debug config for module (%mod_name/%s)"

level: LOG_ERR
conditions:
  • Unable to fetch debug configuration for specified module.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000049 : "BCM56XXD SDK error: Error fetch debug encoding () for module (%dbg_cfg_lvl_names_i/%s) (%mod_name/%s)"

level: LOG_ERR
conditions:
  • Unable to decode the debug error for the specified module.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000050 : "BCM56XXD SDK error: Unable to get sc from unit= port=(%unit/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Unable to retrieve interface data from the unit number.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000051 : "BCM56XXD SDK error: Trouble enabling mirror - interface not initialized(%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Mirror was not enabled.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000052 : "BCM56XXD SDK error: Trouble with bcm_mirror_mode() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set up mirror mode.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000053 : "BCM56XXD SDK error: Trouble with bcm_mirror_to_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set up mirror-to port.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000054 : "BCM56XXD SDK error: Trouble with bcm_egress_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set up egress mirror.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000055 : "BCM56XXD SDK error: Trouble with bcm_mirror_to_pbmp_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set the mirror-to-port bitmap.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000056 : "BCM56XXD driver error: Trouble getting softc for unit= port=(%unit/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Unable to retrieve the interface information for the unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000057 : "BCM56XXD SDK error: Trouble with bcm_egress_clear() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • SDK error with egress functions.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000058 : "BCM56XXD SDK error: Trouble with bcm_ingress_clear() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • SDK error with ingress functions.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000059 : "BCM56XXD SDK error: Trouble with bcm_mirror_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set mirroring.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000060 : "BCM56XXD SDK error: Trouble with bcm_mirror_conduit_higig_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set mirroring with HiGig.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000061 : "BCM56XXD SDK error: Trunk port trouble with bcm_mirror_port_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set the port for mirroring.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000062 : "BCM56XXD SDK error: Non-trunk port trouble with bcm_mirror_port_set() (%bcm_errmsg_status/%s)"

level: LOG_ERR
conditions:
  • Unable to set the port for mirroring.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000063 : "BCM56XXD driver error: Trouble committing mirror settings to hardware: :(%sc_mirror_to_dev_unit/%d) (%sc_mirror_to_physport/%d)"

level: LOG_ERR
conditions:
  • Unable to transmit mirroring settings to hardware.
impact:
  • None
recommended_action:
  • None

0x1001000000000064 : "BCM56XXD driver error: Trouble committing CML settings to hardware: :(%sc_mirror_to_dev_unit/%d) (%sc_mirror_to_physport/%d)"

level: LOG_ERR
conditions:
  • Unable to transmit CML settings to hardware.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000065 : "BCM56XXD info: port mirror (tcpdump) from to CPU.(%enable_0_enabledisable/%s) (%sc_ifname/%s)"

level: LOG_INFO
conditions:
  • Port mirroring from/to CPU.
impact:
  • None
recommended_action:
  • None

0x1001000000000066 : "BCM56XXD info: tcpdump limit: 200 packets per second."

level: LOG_INFO
conditions:
  • There is a 200 packets per second limit for tcpdump.
impact:
  • None
recommended_action:
  • None

0x1001000000000067 : "BCM56XXD SDK error: trouble with bcm_mirror_port_get():(%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to get the port for BCM mirror.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000068 : "BCM56XXD SDK error: Trouble with bcm_mirror_port_set():(%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set the port for BCM mirror.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000069 : "BCM56XXD driver error: Trouble in bs_mirror_set to (%sc_from_ifname/%s) (%sc_conduit_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to create a port mirror.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000070 : "BCM56XXD driver error: Oops. API problem. from and conduit not on same device"

level: LOG_ERR
conditions:
  • There is a problem with the API where the from and conduit are not on the same device.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000071 : "BCM56XXD driver error: Cannot map egress port from modid "

level: LOG_ERR
conditions:
  • Unable to map the egress port from module ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000072 : "BCM56XXD SDK error: Trouble with bcm_mirror_to_pvmp_set() (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set the mirror-to-port bitmap.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000073 : "Memory allocation failed: (const char*)'Cannot allocate pkt Q data store, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate data store.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000074 : "BCM56XXD SDK error: (const char*)'Cannot allocate pkt Q lock, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate lock.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000075 : "BCM56XXD SDK error: (const char*)'RX already running, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Receiving already running.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000076 : "BCM56XXD SDK error: (const char*)'Error setting rx packet rate limit, unit= (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set packet rate limit.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000077 : "BCM56XXD SDK error: Error setting up rx DMA, unit= (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to start the receiving channel.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000078 : "BCM56XXD SDK error: Error registering rx dma callback, unit= error=(%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to register RX DMA callbacks.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000079 : "BCM56XXD info: Trouble restoring cpu mirror afterflood control. unit: , reenable(%pr_sc_dev_unit/%d)"

level: LOG_INFO
conditions:
  • Unable to restore CPU mirror after flood control.
impact:
  • None
recommended_action:
  • None

0x1001000000000080 : "BCM56XXD info: bs_packet_register :: reenablingcpu mirror () delay=s(%pr_client_id/%s) (%sec_packet_registry_i_mirror_halted/%d)"

level: LOG_INFO
conditions:
  • Re-enabling mirroring for flood control.
impact:
  • None
recommended_action:
  • None

0x1001000000000081 : "BCM56XXD driver error: No free space in packet registry"

level: LOG_ERR
conditions:
  • No free space in packet registry.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000082 : "BCM56XXD SDK error: Trouble setting up mirror from to CPU(%pr_sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to set up mirror from/to CPU.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000083 : "BCM56XXD driver error: Trouble setting up mirror from to CPU(%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to set up mirroring.
impact:
  • None
recommended_action:
  • None

0x1001000000000084 : "Memory allocation failed: Cannot allocate memory for higig pkt of size=(%send_len/%d)"

level: LOG_ERR
conditions:
  • Cannot allocate memory for packet of specified size.
impact:
  • None
recommended_action:
  • None

0x1001000000000085 : "BCM56XXD driver error: Trouble deleting mirror from to CPU(%pr_sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to delete mirror from/to CPU.
impact:
  • None
recommended_action:
  • None

0x1001000000000086 : "BCM56XXD driver error: Unable to convert unit= to device(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to convert unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000087 : "BCM56XXD driver error: Unable to convert u=, p= to soft struct(%unit/%d) (%pkt_rx_port/%d)"

level: LOG_ERR
conditions:
  • Unable to convert to software structure.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000088 : "BCM56XXD SDK error: Trouble halting mirror for flood control (%pr_client_id/%s)"

level: LOG_ERR
conditions:
  • Having trouble halting mirror for flood control.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000089 : "BCM56XXD info: bs_packet_rx () unit= FULL!flags() halt mirror of (%pr_client_id/%s) (%unit/%d) (%pkt_flags/%x) (%pr_sc_ifname/%s)"

level: LOG_INFO
conditions:
  • BS mirror disabled for specified unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000090 : "BCM56XXD info: Queue Full, unit: (%sc_dev_unit/%d)"

level: LOG_INFO
conditions:
  • Queue is full.
impact:
  • None
recommended_action:
  • None

0x1001000000000091 : "BCM56XXD driver error: No packet to free in tx callback, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • No packets to free in transmission callback.
impact:
  • None
recommended_action:
  • None

0x1001000000000092 : "BCM56XXD driver error: TX packet length too long. TX aborted(%pkt_data_len/%d)"

level: LOG_ERR
conditions:
  • Transmitted packet length is too long.
impact:
  • None
recommended_action:
  • None

0x1001000000000093 : "BCM56XXD info: Tx Aborted. Link(s) not UP yet. unit=, tx_ports=(%unit/%d) (%pbmppbits/%x)"

level: LOG_INFO
conditions:
  • Transmission canceled since links are not yet up.
impact:
  • None
recommended_action:
  • None

0x1001000000000094 : "BCM56XXD SDK error: Bad vs_packet_tx() pkt alloc, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Bad packet allocation.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000096 : "BCM56XXD info: bcm_tx failed. , unit=, pkt=(%bcm_errmsg_rv/%s) (%unit/%d) (%pkt/%p)"

level: LOG_INFO
conditions:
  • Unable to transmit packet.
impact:
  • None
recommended_action:
  • None

0x1001000000000097 : "BCM56XXD info: Stuck (retries exhausted)"

level: LOG_INFO
conditions:
  • Stuck.
impact:
  • None
recommended_action:
  • None

0x1001000000000098 : "BCM56XXD info: Active tx DMA on unit=(%unit/%d)"

level: LOG_INFO
conditions:
  • Actively transmitting.
impact:
  • None
recommended_action:
  • None

0x1001000000000099 : "BCM56XXD driver error: Config property exceeds max len:(%char_buf/%s)"

level: LOG_ERR
conditions:
  • Configuration property exceeds maximum length.
impact:
  • None
recommended_action:
  • Try a different configuration.

0x1001000000000100 : "BCM56XXD info: Turning off learning and en_ifilter settings for (%ifname/%s)"

level: LOG_INFO
conditions:
  • Turning off learning and filter settings.
impact:
  • None
recommended_action:
  • None

0x1001000000000101 : "BCM56XXD driver error: Unable to disable learning on : (%ifname/%s) (%rv/%d)"

level: LOG_ERR
conditions:
  • Failed to disable learning.
impact:
  • None
recommended_action:
  • None

0x1001000000000102 : "BCM56XXD SDK error: Unable to turn off ingress filtering for : (%ifname/%s) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to turn off ingress filtering.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000103 : "BCM56XXD driver error: Unable to find soft struct for (%ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to find the software structure for the interface.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000104 : "BCM56XXD driver error: PortControlLane set failed. p= err:(%port/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set port control lanes.
impact:
  • None
recommended_action:
  • None

0x1001000000000105 : "BCM56XXD driver error: Port speed set failed. p= err:(%port/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set port speed.
impact:
  • None
recommended_action:
  • None

0x1001000000000106 : "BCM56XXD driver error: port data structure not found for port=(%port/%d)"

level: LOG_ERR
conditions:
  • Unable to find port data structure.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000107 : "BCM56XXD info: Enable higig2 mode on higig ports of unit .(%unit/%d)"

level: LOG_INFO
conditions:
  • Enabling HiGig2 mode.
impact:
  • None
recommended_action:
  • None

0x1001000000000108 : "BCM56XXD info: Enable module loopback mode on higig ports of unit .(%unit/%d)"

level: LOG_INFO
conditions:
  • Enable module loopback mode on HiGig ports of specified unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000109 : "BCM56XXD driver error: Failed to set module loopback on unit port . (%unit/%d) (%i/%d)"

level: LOG_ERR
conditions:
  • Failed to set module loopback.
impact:
  • None
recommended_action:
  • None

0x1001000000000110 : "BCM56XXD info: bcm56xxd: unit port bundle state: (%unit/%d) (%port/%d) (%BUNDLE_ENABLED_pc/%d)"

level: LOG_INFO
conditions:
  • Unit port bundle state.
impact:
  • None
recommended_action:
  • None

0x1001000000000111 : "BCM56XXD error: Platform is not supported"

level: LOG_ERR
conditions:
  • Platform is not supported.
impact:
  • None
recommended_action:
  • Try a different platform.

0x1001000000000112 : "BCM56XXD driver error: Unable to find specified platform id=, unit=(%platform_id/%x) (%unit/%x)"

level: LOG_ERR
conditions:
  • Unable to find specified platform ID.
impact:
  • None
recommended_action:
  • Try a differnet ID.

0x1001000000000113 : "BCM56XXD driver error: Trouble settting transmit phase interpolation for unit=, port=, offset=0x%02x, data=0x%04x(%unit/%d) (%txpis_i_port/%d) (%offset/%x) (%data/%x)"

level: LOG_ERR
conditions:
  • Unable to tune transmit phase interpolation.
impact:
  • None
recommended_action:
  • None

0x1001000000000114 : "BCM56XXD SDK error: SDK error: (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • SDK error message.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000115 : "BCM56XXD driver error: Unable to find vlan member in QinQ Map for vlan<:>(%sc_ifname/%s) (%vlan_vid/%d) (%vlan_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to find the VLAN member.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000116 : "BCM56XXD driver error: Error adding '' to QinQ VLAN :(%sc_ifname/%s) (%vlan_vid/%d) (%vlan_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to add to QinQ VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000117 : "BCM56XXD driver error: Trouble deleting port from QinQ VLAN<:>(%port/%d) (%vlan_vid/%d) (%vlan_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to delete port from VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000118 : "BCM56XXD driver error: Unable to find QinQ data for port vlan<:>(%port/%d) (%vlan_vid/%d) (%vlan_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to find data for the port in VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000119 : "BCM56XXD driver error: Unable to select VLAN priority, port:, mode:(%port/%d) (%cos_mode/%d)"

level: LOG_ERR
conditions:
  • Unable to set VLAN priority.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000120 : "BCM56XXD driver error: ERROR: Invalid gport =0x (%gport/%x)"

level: LOG_ERR
conditions:
  • Unable to resolve the g-port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000121 : "BCM56XXD driver error: Unable to find software structure for unit=, port=(%unit/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Unable to find software structure for the specified unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000122 : "BCM56XXD driver error: Unable to find software structure for unit=, trunk=(%unit/%d) (%tid/%d)"

level: LOG_ERR
conditions:
  • Unable to find the software structure for the specified unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000123 : "BCM56XXD driver error: Unable to get default ingress action for port= SDK Error: (%ext_port/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to get default ingress action for specified port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000124 : "BCM56XXD driver error: Unable to get default egress action for port=, SDK Error: (%ext_port/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to get egress action for specified port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000125 : "BCM56XXD driver error: Unable to find VLAN / for port (%statssvid/%d) (%statscvid/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Unable to find the VLAN for the port.
impact:
  • None
recommended_action:
  • None

0x1001000000000126 : "BCM56XXD driver error: Unable to get tag data for VLAN /, port (%statssvid/%d) (%statscvid/%d) (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to get tag data for the specified VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000127 : "Memory allocation failed: Failed to allocate STP data store, unit=, port=(%dev_unit/%d) (%i/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate Spanning Tree Protocol (STP) data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000128 : "Memory allocation failed: Failed to allocate STP data store, unit=, trunk=(%dev_unit/%d) (%trunk_trunk_name/%s)"

level: LOG_ERR
conditions:
  • Unable to allocate Spanning Tree Protocol (STP) data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000129 : "BCM56XXD driver error: Cannot destroy default STG (%stp_stg/%d)"

level: LOG_ERR
conditions:
  • Unable to destroy default Spanning Tree Protocol (STP) groups.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000130 : "BCM56XXD SDK error: Trouble destroying STG , (%stp_stg/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to destroy Spanning Tree Protocol (STP) groups.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000131 : "Memory allocation failed: Cannot allocate cluster interface data store."

level: LOG_ERR
conditions:
  • Cannot allocate cluster interface data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000132 : "BCM56XXD driver error: Static L2 init failed for remote port=, (%ifname/%s) (%port_id/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize static L2 for the specified remote port.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000133 : "BCM56XXD driver error: Trunk name already in use (%name/%s)"

level: LOG_ERR
conditions:
  • Trunk name is already in use.
impact:
  • None
recommended_action:
  • Try a different name.

0x1001000000000134 : "BCM56XXD driver error: Trunk resources exhausted, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Trunk resources exhausted.
impact:
  • None
recommended_action:
  • None

0x1001000000000135 : "BCM56XXD driver error: Warning: Possible memory leak. NULL expected for trunk_name"

level: LOG_ERR
conditions:
  • Possible memory leak.
impact:
  • None
recommended_action:
  • None

0x1001000000000136 : "Memory allocation failed: Unable to allocate trunk name space for (%name/%s)"

level: LOG_ERR
conditions:
  • Unable to allocate memory for trunk name.
impact:
  • None
recommended_action:
  • None

0x1001000000000137 : "BCM56XXD driver error: STP init failed for trunk=(%name/%s)"

level: LOG_ERR
conditions:
  • Unable to initialize Spanning Tree Protocol (STP).
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000138 : "BCM56XXD driver error: Static L2 init failed for trunk=(%name/%s)"

level: LOG_ERR
conditions:
  • Unable to initialize the specified trunk.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000139 : "BCM56XXD SDK error: bcm_trunk_chip_info_get: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to get information about the chip.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000140 : "BCM56XXD SDK error: Unable to find target trunk members(%trunk_trunk_id/%d)"

level: LOG_ERR
conditions:
  • Unable to find the targeted trunk with the specified ID.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000141 : "BCM56XXD driver error: Unable to program trunk id: (cmp:0x(%trunk_trunk_id/%d) (%cmp_state/%x)"

level: LOG_ERR
conditions:
  • Unable to program the trunk ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000142 : "BCM56XXD driver error: Unable to find trunk name , unit=(%name/%s) (%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to find the trunk name.
impact:
  • None
recommended_action:
  • Make sure the name is correct or try a different name.

0x1001000000000143 : "BCM56XXD driver error: Invalid trunk ID , id=(%name/%s) (%tid/%d)"

level: LOG_ERR
conditions:
  • Invalid trunk ID.
impact:
  • None
recommended_action:
  • Make sure the ID is correct or try a different name.

0x1001000000000144 : "BCM56XXD driver error: L2 stash restore failed for trunk (%trunk_trunk_name/%s)"

level: LOG_ERR
conditions:
  • Unable to restore L2 stash for the specified trunk.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000145 : "BCM56XXD SDK error: Unable to find target trunk in hardware(%tid/%d)"

level: LOG_ERR
conditions:
  • Unable to find target trunk in the hardware.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000146 : "BCM56XXD driver error: Trouble setting trunk: unit=, trunk=(%i_unit/%d) (%trunk_trunk_name/%s)"

level: LOG_ERR
conditions:
  • Unable to set the trunk.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000147 : "BCM56XXD driver error: STP state set failed, unit=, trunk=(%unit/%d) (%name/%s)"

level: LOG_ERR
conditions:
  • Unable to set the Spanning Tree Protocol (STP) state.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000148 : "BCM56XXD driver error: Unable to find trunk name (%trunk_name/%s)"

level: LOG_ERR
conditions:
  • Unable to find the trunk name.
impact:
  • None
recommended_action:
  • Make sure the name is correct or try a different name.

0x1001000000000149 : "BCM56XXD driver error: Requested port not a member :(%member_module_id/%d) (%member_physport/%d)"

level: LOG_ERR
conditions:
  • Requested port is not a member of the trunk.
impact:
  • None
recommended_action:
  • None

0x1001000000000150 : "BCM56XXD driver error: Trouble resetting qinq-ethertype, port (%member_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to reset the type of the Ethernet port.
impact:
  • None
recommended_action:
  • None

0x1001000000000151 : "BCM56XXD SDK error: bs_trunk_addr_set: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set the address of the trunk.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000152 : "BCM56XXD info: SDK error delete l2 entries for trunk on unit .(%bcm_errmsg_rv/%s) (%tid/%d) (%i_unit/%d)"

level: LOG_INFO
conditions:
  • Error in deleting L2 entries.
impact:
  • None
recommended_action:
  • None

0x1001000000000153 : "BCM56XXD driver error: Trouble removing trunk hash filters: unit=(%i_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to remove the trunk hash filter.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000154 : "BCM56XXD SDK error: Trouble setting trunk , unit (%trunk_trunk_id/%d) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to set up the trunk.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000155 : "BCM56XXD SDK error: Trouble destroying trunk , unit (%trunk_trunk_id/%d) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to destroy the trunk.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000156 : "BCM56XXD info: SDK error delete l2 entriesfor trunk on unit (%bcm_errmsg_rv/%s) (%trunk_trunk_id/%d) (%dev_unit/%d)"

level: LOG_INFO
conditions:
  • Error in deleting L2 entries.
impact:
  • None
recommended_action:
  • None

0x1001000000000157 : "BCM56XXD driver error: Trouble setting trunk hash filters: unit , hash=(%dev_unit/%d) (%trunk_hash/%d)"

level: LOG_ERR
conditions:
  • Unable to set trunk hash filters.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000158 : "BCM56XXD driver error: Unable to match module id for module (%mod_id/%d)"

level: LOG_ERR
conditions:
  • Unable to match the module ID.
impact:
  • None
recommended_action:
  • Try a different module ID.

0x1001000000000159 : "BCM56XXD driver error: Error: Bad input pointers."

level: LOG_ERR
conditions:
  • Bad input pointer.
impact:
  • None
recommended_action:
  • Try a different pointer.

0x1001000000000160 : "BCM56XXD SDK error: Trouble reading trunk info from hardware: trunk=, tid=, rv= on unit .(%trunk_trunk_name/%s) (%trunk_trunk_id/%d) (%rv/%d) (%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to read the trunk information from hardware.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000161 : "BCM56XXD SDK error: Trouble removing FFP filter from hardware, SDK error (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to remove the fast filtering processor (FFP) filter from hardware.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000162 : "BCM56XXD SDK error: Trouble deleting FFP filter, SDK error (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to delete fast filtering processor (FFP) filter.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000163 : "BCM56XXD SDK error: bcm_trunk_create_id: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to create trunk.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000164 : "BCM56XXD SDK error: bs_gport_trunk_set: unit= (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set up trunk using generalized port.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000165 : "BCM56XXD info: Configure port based RTAG7 hash on unit .(%unit/%d)"

level: LOG_INFO
conditions:
  • Configuring port-based hash on specified unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000166 : "BCM56XXD info: Configure RTAG7 hash on unit .(%unit/%d)"

level: LOG_INFO
conditions:
  • Configuring RTAG7 hash on specified unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000167 : "BCM56XXD driver error: Unable to convert invalid slot number: slot=, port=(%slot/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Invalid slot number.
impact:
  • None
recommended_action:
  • None

0x1001000000000168 : "BCM56XXD driver error: Unable to convert invalid port number: slot=, port=(%slot/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Invalid port number.
impact:
  • None
recommended_action:
  • None

0x1001000000000169 : "BCM56XXD SDK error: Error setting unit=, port= default vlan id(%unit/%d) (%port/%d)"

level: LOG_ERR
conditions:
  • Unable to set the port with default VLAN.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000170 : "BCM56XXD driver error: Incorrect PCI memory address space : (%PRETTY_FUNCTION/%s) (%LINE/%d)"

level: LOG_ERR
conditions:
  • Wrong memory address space.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000171 : "BCM56XXD driver error: Failed to open /dev/mem : (%PRETTY_FUNCTION/%s) (%LINE/%d)"

level: LOG_ERR
conditions:
  • Unable to open /dev/mem file.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000172 : "BCM56XXD driver error: : mmap failed with error (%PRETTY_FUNCTION/%s)"

level: LOG_ERR
conditions:
  • Unable to create new mapping in virtual address space.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000173 : "BCM56XXD driver error: Error: chassis_slot not yet populated"

level: LOG_ERR
conditions:
  • Slots are not yet populated.
impact:
  • None
recommended_action:
  • Wait for a bit and try again.

0x1001000000000174 : "BCM56XXD driver error: Error: chassis_max_slots not yet populated"

level: LOG_ERR
conditions:
  • Maximum slots in the chassis are not yet populated.
impact:
  • None
recommended_action:
  • Wait for a bit and try again.

0x1001000000000175 : "BCM56XXD info: map unit higig port to hgm module id mac Id .(%unit/%d) (%port/%d) (%mod_id/%d) (%mac_id/%d)"

level: LOG_INFO
conditions:
  • Mapping HiGig port to HGM module MAC ID.
impact:
  • None
recommended_action:
  • None

0x1001000000000176 : "BCM56XXD info: Increment HA heartbeat from , line (%func/%s) (%line/%d)"

level: LOG_INFO
conditions:
  • Incrementing high availability (HA) heartbeat.
impact:
  • None
recommended_action:
  • None

0x1001000000000177 : "BCM56XXD driver error: Unable to find vlan member in vlan : (%vlan_vid/%d) (%vlan_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to find the VLAN member in VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000178 : "BCM56XXD driver error: Cannot add a trunk member to a vlan"

level: LOG_ERR
conditions:
  • Unable to add a trunk member to a VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000179 : "BCM56XXD driver error: No support for multiple untagged vlan ports"

level: LOG_ERR
conditions:
  • Use of multiple untagged VLAN ports is not supported.
impact:
  • None
recommended_action:
  • None

0x1001000000000180 : "BCM56XXD driver error: Unable to find free member space in vlan (%vlan_vid/%d)"

level: LOG_ERR
conditions:
  • Unable to find free member space in VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000181 : "BCM56XXD driver error: Trouble adding member to QinQ vlan (%sc_ifname/%s) (%vlan_vid/%d)"

level: LOG_ERR
conditions:
  • Unable to add member to QinQ VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000182 : "BCM56XXD driver error: Trunk workers cannot have their VLANs changed, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to change the VLANs for the trunk workers.
impact:
  • None
recommended_action:
  • None

0x1001000000000183 : "BCM56XXD driver error: Could not enable port learning unit , port (%dev_unit/%d) (%p/%d)"

level: LOG_ERR
conditions:
  • Unable to enable port learning on the unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000184 : "BCM56XXD driver error: Problem changing vlan id unit=, old vid=(%unit/%d) (%vid/%d)"

level: LOG_ERR
conditions:
  • Unable to change VLAN ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000185 : "BCM56XXD driver error: Problem changing vlan id /, unit=(%vid/%d) (%cvid/%d) (%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to change VLAN ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000186 : "Memory allocation failed: Error allocating vlan data store, unit=, vid=(%dev_unit/%d) (%vid/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate VLAN data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000187 : "Memory allocation failed: Error allocating vlan member list store, unit=, vid=(%dev_unit/%d) (%vid/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate VLAN member list store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000188 : "BCM56XXD driver error: Attempt to delete non-existent VLAN vid=/(%vid/%d) (%cvid/%d)"

level: LOG_ERR
conditions:
  • Attempted to delete nonexistent VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000189 : "BCM56XXD driver error: Trunk already exists on vlan (%trunk_trunk_name/%s) (%next_vlan_vid/%d)"

level: LOG_ERR
conditions:
  • Trunk already exists on VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000190 : "BCM56XXD driver error: Trouble adding trunk member to vlan (%vs_softc_t_trunk_members_i_ifname/%s) (%vlan_vid/%d)"

level: LOG_ERR
conditions:
  • Unable to add trunk member to VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000191 : "BCM56XXD driver error: Unable to add trunk to vlan /(%trunk_trunk_id/%d) (%vid/%d) (%cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to add trunk to VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000192 : "BCM56XXD driver error: Unable to find vlan , on unit (%vid/%d) (%i/%d)"

level: LOG_ERR
conditions:
  • Unable to find the VLAN.
impact:
  • None
recommended_action:
  • Make sure the VLAN is correct and try again.

0x1001000000000193 : "BCM56XXD driver error: Unable to find free member space in vlan , unit (%vid/%d) (%i/%d)"

level: LOG_ERR
conditions:
  • Unable to find free member space in VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000194 : "BCM56XXD driver error: Trunk not a member of vlan (%trunk_trunk_name/%s) (%vlan_vid/%d)"

level: LOG_ERR
conditions:
  • Trunk is not a member of the VLAN.
impact:
  • None
recommended_action:
  • Make sure the VLAN is correct and try again.

0x1001000000000195 : "BCM56XXD driver error: Unable to delete trunk from vlan /(%trunk_trunk_id/%d) (%vid/%d) (%cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to delete trunk from the VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000196 : "BCM56XXD driver error: Problem changing CVID:, VLAN:/ not found(%new_cvid/%d) (%vid/%d) (%old_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to change CVID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000197 : "BCM56XXD driver error: Problem changing CVID:, VLAN:/(%new_cvid/%d) (%vid/%d) (%old_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to change CVID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000198 : "BCM56XXD driver error: Trouble setting ether-type for member (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to set the Ethernet type for the member.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000199 : "BCM56XXD SDK error: Bad trunk change handler register, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Bad trunk link event handler.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000200 : "BCM56XXD SDK error: Bad linkscan change handler register, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Bad linkscan event handler.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000201 : "BCM56XXD driver error: Trunk hash not recognized(%mcp_hash/%d)"

level: LOG_ERR
conditions:
  • Trunk hash is incorrect.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000202 : "BCM56XXD driver error: Error deleting trunk on unit (%trunk_name/%s) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to delete trunk on the unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000203 : "BCM56XXD info: Trunk not found(%trunk_name/%s)"

level: LOG_INFO
conditions:
  • Trunk not found.
impact:
  • None
recommended_action:
  • None

0x1001000000000204 : "BCM56XXD driver error: Error: Internal insanity"

level: LOG_ERR
conditions:
  • Something has been initialized or set up incorrectly.
impact:
  • None
recommended_action:
  • Reboot the system controller. If this problem persists, please contact your internal support.

0x1001000000000205 : "BCM56XXD driver error: Error creating trunk on unit (%trunk_name/%s) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to create trunk on the unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000206 : "BCM56XXD driver error: Error trunk already exists on unit (%trunk_name/%s) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Trunk already exists on this unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000207 : "BCM56XXD driver error: Trunk has working members on unit (%trunk_name/%s) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Trunk has working members on the unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000208 : "BCM56XXD driver error: Unable to find Non fabricswitch on this platform to support remote trunk member."

level: LOG_ERR
conditions:
  • Fabric switch is down or malfunctioning.
impact:
  • None
recommended_action:
  • Powercycle entire Chassis, reboot. If still do not working, reach F5 internal support for help.

0x1001000000000209 : "BCM56XXD driver error: Trouble adding interface to trunk=(%csc_ifname/%s) (%trunk_name/%s)"

level: LOG_ERR
conditions:
  • Unable to add interface to the trunk.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000210 : "BCM56XXD driver error: Trouble deleting interface from trunk=(%csc_ifname/%s) (%trunk_name/%s)"

level: LOG_ERR
conditions:
  • Unable to delete interface from the trunk.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000211 : "BCM56XXD driver error: Error trunk on unit does not exist(%trunk_name/%s) (%sc_dev_unit/%d)"

level: LOG_ERR
conditions:
  • Trunk on the specified unit does not exist.
impact:
  • None
recommended_action:
  • Make sure the trunk name is correct and try again.

0x1001000000000212 : "BCM56XXD driver error: Error setting trunk hash value (%trunk_name/%s) (%bs_hash/%d)"

level: LOG_ERR
conditions:
  • Unable to set the trunk hash value.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000213 : "BCM56XXD driver error: Cannot change ID of active trunk from to (%trunk_name/%s) (%trunk_trunk_id/%d) (%id/%d)"

level: LOG_ERR
conditions:
  • Cannot change ID of active trunk.
impact:
  • None
recommended_action:
  • None

0x1001000000000214 : "BCM56XXD info: Trunk not found in bsx_trunk_id_set.(%trunk_name/%s)"

level: LOG_INFO
conditions:
  • Unable to find the trunk.
impact:
  • None
recommended_action:
  • None

0x1001000000000215 : "BCM56XXD info: Trunk not found in bsx_trunk_tpid_set.(%trunk_name/%s)"

level: LOG_INFO
conditions:
  • Unable to find the trunk.
impact:
  • None
recommended_action:
  • None

0x1001000000000216 : "BCM56XXD info: (%X/%d) (%builtin_return_address/%p)"

level: LOG_INFO
conditions:
  • Information about return address.
impact:
  • None
recommended_action:
  • None

0x1001000000000217 : "BCM56XXD driver error: ERROR: Assertion ()(%expr/%s)"

level: LOG_ERR
conditions:
  • Assertion error.
impact:
  • None
recommended_action:
  • None

0x1001000000000218 : "BCM56XXD info: stack trace:"

level: LOG_INFO
conditions:
  • Showing stack trace.
impact:
  • None
recommended_action:
  • None

0x1001000000000219 : "BCM56XXD driver error: Exiting after assert failure at : (%file/%s) (%line/%d)"

level: LOG_ERR
conditions:
  • Exiting after assertion error.
impact:
  • None
recommended_action:
  • None

0x1001000000000220 : "BCM56XXD driver error: Port lookup failed on unit invalid port:(%sdk_unit/%d) (%sdk_port/%d)"

level: LOG_ERR
conditions:
  • Unable to look up due ot invalid port.
impact:
  • None
recommended_action:
  • Make sure the port is correct and try again.

0x1001000000000221 : "BCM56XXD driver error: Unable to find platform info for unit= dev_id=0x(%unit/%d) (%dev_id/%x)"

level: LOG_ERR
conditions:
  • Unable to find the platform information for the specified unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000222 : "BCM56XXD SDK error: custome_pre_init() failed: unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize the platform.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000223 : "BCM56XXD driver error: Error setting PID to in BHW(%bs_platform_ext_get_bhw_pid/%s)"

level: LOG_ERR
conditions:
  • Error setting the process ID in BHW.
impact:
  • None
recommended_action:
  • None

0x1001000000000224 : "BCM56XXD driver error: bhw_init_hw failed: sdk return=(%bcm_ret/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize BCM SDK and all attached units.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000225 : "BCM56XXD SDK error: Detected 0 devices waiting 5s..."

level: LOG_ERR
conditions:
  • Detected 0 device.
impact:
  • None
recommended_action:
  • None

0x1001000000000226 : "BCM56XXD driver error: bs_bhw_lp_init failed: sdk return=(%bcm_ret/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize logical port mapping.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000227 : "BCM56XXD SDK error: mdebug_init failed"

level: LOG_ERR
conditions:
  • Unable to initialize the debug manager.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000228 : "BCM56XXD driver error: bs_if_attach() failed: unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to attach the interface.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000229 : "BCM56XXD info: bcm56xxd: attached unit ()(%unit/%d) (%soc_dev_name_unit/%s)"

level: LOG_INFO
conditions:
  • Attached units to the switch.
impact:
  • None
recommended_action:
  • None

0x1001000000000230 : "BCM56XXD driver error: bs_if_hw_start() failed: unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to start the interface hardware.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000231 : "BCM56XXD driver error: bs_arl_init() failed"

level: LOG_ERR
conditions:
  • Unable to initialize L2 free list.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000232 : "BCM56XXD driver error: SFP disable failed for PORT=(%port/%d)"

level: LOG_ERR
conditions:
  • Unable to disable SFP for the specified port.
impact:
  • None
recommended_action:
  • None

0x1001000000000233 : "BCM56XXD driver error: Non-SFP disable failed for PORT=(%port/%d)"

level: LOG_ERR
conditions:
  • Unable to disable non-SFP for the specified port.
impact:
  • None
recommended_action:
  • None

0x1001000000000234 : "BCM56XXD SDK error: Error bcm_stk_ucbitmap_set, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to set the bitmap.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000235 : "Memory allocation failed: Cannot VLAN ref cnt data, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Cannot allocate reference count data for the VLAN.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000236 : "Memory allocation failed: Cannot allocate interface data store, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate interface data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000237 : "Memory allocation failed: Cannot allocate trunk data store, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to allocate trunk data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000238 : "BCM56XXD SDK error: Cannot allocate trunk lock mutex, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Cannot allocate trunk lock mutex.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000239 : "BCM56XXD driver error: Device initialization failed, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize the device.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000240 : "BCM56XXD SDK error: custome_post_init() failed: unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize POST.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000241 : "BCM56XXD driver error: Interface initialization failure, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize the interface.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000242 : "BCM56XXD info: Enable HIGIG lookup mode for higig port=(%hg_port/%d)"

level: LOG_INFO
conditions:
  • Enabling HiGig mode on the specified port.
impact:
  • None
recommended_action:
  • None

0x1001000000000243 : "BCM56XXD SDK error: Error calling bcm_init_phy_id_map unit= with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to initialize the physical ID mapping due to SDK error.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000244 : "BCM56XXD SDK error: Error bringing up internal interfaces unit=, => port=.(%unit/%d) (%lrv/%d) (%i/%d)"

level: LOG_ERR
conditions:
  • Unable to bring up internal interface.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000245 : "BCM56XXD SDK error: Error bcm_stk_my_modid_set, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to set modport.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000246 : "BCM56XXD SDK error: Error bcm_stk_modport_set, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to set the modport.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000247 : "BCM56XXD driver error: Error creating 8021D field group, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize field group to trap 8021D multicast packets.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000248 : "BCM56XXD driver error: Error creating LACPDU field filter, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to create Link Aggregation Control Protocol (LACP) data unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000249 : "BCM56XXD driver error: Error creating STP BPDU FFPs, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to create STP, BPDU, and FFP.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000250 : "BCM56XXD driver error: Error creating LLDPDU field filter, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to create LLDP data unit.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000251 : "BCM56XXD info: field group entries installed for trapping 8021D packets to CPU."

level: LOG_INFO
conditions:
  • Field group entries installed for trapping 8021D packets to CPU.
impact:
  • None
recommended_action:
  • None

0x1001000000000252 : "BCM56XXD driver error: Error creating LACPDU FFPs, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to create LACPDU and FFPs.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000253 : "BCM56XXD SDK error: Trouble initializing higig : SDK error (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to initalize HiGig.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000254 : "BCM56XXD SDK error: Error loading LED code, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to load LED.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000255 : "BCM56XXD SDK error: Error registering link led handler, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to register LED handler.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000256 : "BCM56XXD SDK error: Error setting bcm_port_linkscan (unit=) : port (%unit/%d) (%SOC_PORT_NAME_unit/%s)"

level: LOG_ERR
conditions:
  • Unable to set the mode for link scanning in the specified port.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000257 : "BCM56XXD driver error: Error initializing STP data store, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize STP data store.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000258 : "BCM56XXD driver error: Error initializing raw packet subsystem, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize raw packet subsystem.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000259 : "BCM56XXD driver error: Error disabling port based vlans, unit=(%unit/%d)"

level: LOG_ERR
conditions:
  • Failed to disable port based VLANs.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000260 : "BCM56XXD SDK error: Error enabling tagged packet filgering (unit=) : port (%unit/%d) (%SOC_PORT_NAME_unit/%s)"

level: LOG_ERR
conditions:
  • Cannot enable tagged packet filtering.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000261 : "BCM56XXD SDK error: Unable to set single COS queue unit=, (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable ot set CoS queue.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000262 : "BCM56XXD SDK error: Error enabling BPDU reception, unit=, port=(%unit/%d) (%p/%d)"

level: LOG_ERR
conditions:
  • Cannot enable BPDU reception.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000263 : "BCM56XXD SDK error: Error enabling HG BPDU reception, unit=, port=(%unit/%d) (%p/%d)"

level: LOG_ERR
conditions:
  • Cannot enable BPDU reception.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000264 : "BCM56XXD driver error: Error initializing hardware, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize hardware.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000265 : "BCM56XXD SDK error: bcm_port_linkscan_set failed, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Failed to enable link scanning for non-pluggable ports.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000266 : "BCM56XXD SDK error: port linkscan disable failed, unit=, port=(%dev_unit/%d) (%sc_physport/%d)"

level: LOG_ERR
conditions:
  • Unable to disable link scan on the port.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000267 : "BCM56XXD driver error: bs_if_initialize: can't read port_ability for (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to read the port ability.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000268 : "BCM56XXD SDK error: Port enable failed, unit=, physport=(%dev_unit/%d) (%sc_physport/%d)"

level: LOG_ERR
conditions:
  • Cannot enable port.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000269 : "BCM56XXD SDK error: Port autoneg set failed, unit=, physport=(%dev_unit/%d) (%sc_physport/%d)"

level: LOG_ERR
conditions:
  • Port auto-negotiation failed.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000270 : "BCM56XXD SDK error: Initializing port settings failed, unit=, physport=(%dev_unit/%d) (%sc_physport/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize port settings.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000271 : "BCM56XXD driver error: // 'bs_if_initialize called for l2_stash: for (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to initialize L2 stash.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000272 : "BCM56XXD driver error: Static L2 init failed for port=, unit=(%sc_physport/%d) (%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize static L2 for the specified port.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000273 : "BCM56XXD driver error: bs_if_reinitialize_all: trouble getting soft struct, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to retrieve the software structure.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000274 : "BCM56XXD driver error: bs_if_reinitialize_all: trouble reprobing ports, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to probe the ports.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000275 : "BCM56XXD driver error: bs_if_reinitialize_all: can't init (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to initialize the interfaces.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000276 : "BCM56XXD driver error: bs_if_initialize_all: trouble getting soft struct, unit=(%dev_unit/%d)"

level: LOG_ERR
conditions:
  • Unable to retrieve the software structure.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000277 : "BCM56XXD driver error: bs_if_initialize_all: can't init (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to initialize the interfaces.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000278 : "BCM56XXD SDK error: In bs_if_linkscan_disable bcm_linkscan_disable on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Failed to disable link scan due to SDK error.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000279 : "BCM56XXD SDK error: In bs_if_syshalt bcm_rx_stop on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to stop receiving due to SDK error.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000280 : "BCM56XXD SDK error: In bs_if_syshalt bcm_detach on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to detach from BCM due to SDK error.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000281 : "BCM56XXD SDK error: In bs_if_syshalt soc_detach on unit failed with SDK error .(%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to detach the socket due to SDK error.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000282 : "BCM56XXD SDK error: [bs_if_set_rate_limit]bcm_rate_type_set() fails for unit : (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to set the rate limit.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000283 : "BCM56XXD SDK error: writing dynamic buf limit. unit : (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Writing to dynamic buffer.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000284 : "BCM56XXD driver error: setting MTU for unit ,port to failed.(%unit/%d) (%port/%d) (%size/%d)"

level: LOG_ERR
conditions:
  • Unable to set the maximum transmission unit (MTU).
impact:
  • None
recommended_action:
  • None

0x1001000000000285 : "BCM56XXD SDK error: [bs_if_set_wred]bcm_cosq_discard_set() fails for unit : (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to configure Weighted Random Early Discard (WRED).
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000286 : "BCM56XXD SDK error: [bs_if_set_wred]bcm_cosq_discard_port_set() fails for unit : (%unit/%d) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • Unable to configure Weighted Random Early Discard (WRED).
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000287 : "BCM56XXD info: unit : Customize buffering: total dyn pool=%%, dyn per port=%% (bytes/port: static= dyn=, total: static= dyn= oversub:)(%unit/%d) (%max_dyn_total/%d) (%max_dyn_port/%d) (%fix_limit_128/%d) (%dyn_limit_128/%d) (%fix_total_128/%d) (%dyn_total_128/%d) (%fix_total_dyn_limitnports_ncells_128/%d)"

level: LOG_INFO
conditions:
  • Information about the units.
impact:
  • None
recommended_action:
  • None

0x1001000000000288 : "BCM56XXD info: Setting burst factor to %% (alpha: val:) (%max_dyn_total/%d) (%alpha/%d) (%alpha_reg/%d)"

level: LOG_INFO
conditions:
  • Setting the burst factor to new value.
impact:
  • None
recommended_action:
  • None

0x1001000000000289 : "BCM56XXD info: Configure unit egress dynamic threshold alpha value to .(%unit/%d) (%alpha_regval/%d)"

level: LOG_INFO
conditions:
  • Configuring new unit egress dynamic threshold alpha value.
impact:
  • None
recommended_action:
  • None

0x1001000000000290 : "BCM56XXD info: Configure unit ingress PG7 dynamic threshold alpha value to .(%unit/%d) (%alpha_regval/%d)"

level: LOG_INFO
conditions:
  • Configuring new unit ingress PG7 dynamic threshold alpha value.
impact:
  • None
recommended_action:
  • None

0x1001000000000291 : "BCM56XXD info: Configure unit ingress PG7 static threadshold shared limit cell to 0x.(%unit/%d) (%max_cells/%x)"

level: LOG_INFO
conditions:
  • Configuring unit ingress PG7 static threadshold shared limit cell to 0x.
impact:
  • None
recommended_action:
  • None

0x1001000000000292 : "BCM56XXD info: Received signal: ()(%signame_signame_UNKNOWN/%s) (%sig/%d)"

level: LOG_INFO
conditions:
  • Received a signal.
impact:
  • None
recommended_action:
  • None

0x1001000000000293 : "BCM56XXD info: fault addr: (%info_si_addr/%x)"

level: LOG_INFO
conditions:
  • Address where it faulted.
impact:
  • None
recommended_action:
  • None

0x1001000000000294 : "BCM56XXD info: fault code: 0x(%info_si_code/%x)"

level: LOG_INFO
conditions:
  • The code where it faulted.
impact:
  • None
recommended_action:
  • None

0x1001000000000295 : "BCM56XXD info: state: ()(%sync_statename_get_state/%s) (%state/%x)"

level: LOG_INFO
conditions:
  • Current state.
impact:
  • None
recommended_action:
  • None

0x1001000000000296 : "BCM56XXD info: check for active transmit DMAs:"

level: LOG_INFO
conditions:
  • Checking for active transmit DMAs.
impact:
  • None
recommended_action:
  • None

0x1001000000000297 : "BCM56XXD error: only valid for dataplane switch(%FUNCTION/%s)"

level: LOG_ERR
conditions:
  • Function is only valid for the dataplane switch.
impact:
  • None
recommended_action:
  • None

0x1001000000000298 : "BCM56XXD error: Num ports exceeds cc_switchd_pmap size"

level: LOG_ERR
conditions:
  • The number of ports exceeds the switchd size.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000299 : "BCM56XXD notice: slot pkt: (%fmt_slotid_packet_slotid_packet/%s)"

level: LOG_NOTICE
conditions:
  • Information about the slot packet.
impact:
  • None
recommended_action:
  • None

0x1001000000000300 : "BCM56XXD error: bcm_port_link_status_get port FAILED (%sc_ifname/%s) (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to get the port's current link state.
impact:
  • None
recommended_action:
  • None

0x1001000000000301 : "BCM56XXD info: link for port is not UP(%sc_ifname/%s)"

level: LOG_INFO
conditions:
  • The link is not up.
impact:
  • None
recommended_action:
  • None

0x1001000000000302 : "BCM56XXD error: vs_packet_tx on failed (%sc_ifname/%s) (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to start packet transmission.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000303 : "BCM56XXD error: Cannot find ventry for (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to find VLAN entry in the list for the specified VLAN name.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000304 : "BCM56XXD error: NULL trunk on port for (%sc_ifname/%s)"

level: LOG_ERR
conditions:
  • The trunk is null for the specified port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000305 : "BCM56XXD error: failed to add lagg to vlan (%ccswp_plagg_role_name/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to add link aggregation group (LAG) to VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000306 : "BCM56XXD error: failed to delete lagg from vlan (%ccswp_plagg_role_name/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to delete link aggregation group (LAG) to VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000307 : "BCM56XXD error: Unknown update operation (%role_name/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unknown update operation.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000308 : "BCM56XXD error: vlan lagg update failed"

level: LOG_ERR
conditions:
  • Unable to update link aggregation group (LAG) to VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000309 : "BCM56XXD error: Adding port to vlan failed(%sc_ifname/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to add port to VLAN.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000310 : "BCM56XXD error: Deleting port from vlan failed(%sc_ifname/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to delete port from VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000311 : "BCM56XXD error: ifname() trunk_name() failed err() (%sc_ifname/%s) (%trunk_name/%s) (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to get the trunk name.
impact:
  • None
recommended_action:
  • None

0x1001000000000312 : "BCM56XXD error: Failed to add interface() to trunk() err= (%slotted_ifname/%s) (%trunk_name/%s) (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to add interface to the trunk.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000313 : "BCM56XXD error: bsx_trunk create_default failed to create trunk id (%new_lagg_role_name_0/%s) (%new_lagg_lagg_id/%d)"

level: LOG_ERR
conditions:
  • Unable to create trunk ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000314 : "BCM56XXD info: Exiting before adding all portsmbrs_added(), new_lagg->num_mbrs() laggname (%mbrs_added/%d) (%new_lagg_num_mbrs/%d) (%new_lagg_role_name_0/%s)"

level: LOG_INFO
conditions:
  • Exiting before all port members were added.
impact:
  • None
recommended_action:
  • None

0x1001000000000315 : "BCM56XXD error: Adding port to trunk failed(%port_idx/%d) (%new_lagg_role_name/%s)"

level: LOG_ERR
conditions:
  • Unable to add port to the trunk.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000316 : "BCM56XXD starting up: Initializing switch devices"

level: LOG_INFO
conditions:
  • Initializing switch devices.
impact:
  • None
recommended_action:
  • None

0x1001000000000317 : "BCM56XXD error: Trouble initializing switch devices"

level: LOG_ERR
conditions:
  • Unable to initialize switch devices.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000318 : "BCM56XXD error: Failed to add cluster interface for , modid (%slotted_ifname/%s) (%bs_dev_modid/%d)"

level: LOG_ERR
conditions:
  • Failed to add cluster interface.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000319 : "BCM56XXD error: Failed to flush arl table"

level: LOG_ERR
conditions:
  • Unable to flush ARL table.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000320 : "BCM56XXD error: Cannot populate cluster interface (%slotted_ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to populate cluster interface.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000321 : "BCM56XXD starting up: BCM56xxd starting. debug=, foreground=, packet=, bcm_debug=0xlx, soc_debug=0xlx(%debug/%d) (%foreground/%d) (%packet_interface_enable/%d)"

level: LOG_INFO
conditions:
  • Switch is starting up.
impact:
  • None
recommended_action:
  • None

0x1001000000000322 : "BCM56XXD error: switchd_bs: Cannot find bs platform"

level: LOG_ERR
conditions:
  • Cannot find BS platform.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000323 : "BCM56XXD error: Number of devs found () exceeds CC_SWITCH_MAX_SWITCHES ()(%num_bs_devs/%d) (%CC_SWITCH_MAX_SWITCHES/%d)"

level: LOG_ERR
conditions:
  • Number of devs found exceeds maximum number of switches allowed.
impact:
  • None
recommended_action:
  • None

0x1001000000000324 : "BCM56XXD error: Alloc of of cc_switch_info_t failed"

level: LOG_ERR
conditions:
  • Unable to allocate switch information.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000325 : "BCM56XXD error: Cannot determine switch role"

level: LOG_ERR
conditions:
  • Unable to determine the switch role.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000326 : "BCM56XXD error: Role for switch unit unknown(%bs_devcfg_unit/%d)"

level: LOG_ERR
conditions:
  • Unknown switch role.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000327 : "BCM56XXD notice: Disabling port(idx(), name(), phys_port()) on switch(Unit() swinst()) (%bs_idx/%d) (%bs_port_ifname_bs_port_ifname_unknown/%s) (%bs_port_physport/%d) (%bs_devcfg_unit/%d) (%swinst_switch_handlerole_CC_SWITCH_OVERLAY_overlay_data_planen/%s)"

level: LOG_NOTICE
conditions:
  • Disabling the port on the switch.
impact:
  • None
recommended_action:
  • None

0x1001000000000328 : "BCM56XXD SDK error: Error taking down internal interfaces unit=, => port=.(%bs_devcfg_unit/%d) (%lrv/%d) (%bs_idx/%d)"

level: LOG_ERR
conditions:
  • Unable to take down the internal interface.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000329 : "BCM56XXD error: Cannot determine platform_id"

level: LOG_ERR
conditions:
  • Unable to determine the platform ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000330 : "BCM56XXD notice: Enabling stp passthrough mode "

level: LOG_NOTICE
conditions:
  • Enabling STP passthrough mode.
impact:
  • None
recommended_action:
  • None

0x1001000000000331 : "BCM56XXD error: BCM56xxd failed to daemonize"

level: LOG_ERR
conditions:
  • Switch failed to daemonize (prepare as background process).
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000332 : "BCM56XXD error: Exiting due to hardware init failure"

level: LOG_ERR
conditions:
  • Failed to initialize hardware. Exiting.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000333 : "BCM56XXD error: Cannot map bs info to cc switchd"

level: LOG_ERR
conditions:
  • Unable to map BS information to switchd.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000334 : "BCM56XXD driver error: Failure setting STP passthrough mode "

level: LOG_ERR
conditions:
  • Unable to set up STP passthrough mode.
impact:
  • None
recommended_action:
  • None

0x1001000000000335 : "pthread_cond_timedwait returns "

level: LOG_ERR
conditions:
  • Unexpected return code from waiting for the thread.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000336 : "lock failure "

level: LOG_ERR
conditions:
  • Unable to lock the mutex.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000337 : "unlock failure "

level: LOG_ERR
conditions:
  • Unable to unlock the mutex.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000338 : "lock(bank_lock) failed: "

level: LOG_ERR
conditions:
  • Unable to lock the bank_lock.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000339 : "unlock(bank_lock) failed: "

level: LOG_ERR
conditions:
  • Unable to unlock the bank_lock.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000340 : "No vlan matching key (%vlk/%d)"

level: LOG_ERR
conditions:
  • No matching key to the VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000341 : "member not in vlan (%mbr_idx/%d) (%vlan_vlan_id/%d)"

level: LOG_INFO
conditions:
  • The member is not in the VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000342 : "Unexpected vlan/mbr leaf"

level: LOG_INFO
conditions:
  • Unexpected VLAN member leaf.
impact:
  • None
recommended_action:
  • None

0x1001000000000343 : "confd_register_trans_cb FAILED (%confd_err/%s)"

level: LOG_ERR
conditions:
  • Unable to register the functions to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000344 : "confd_register_data_cb FAILED (%confd_err/%s)"

level: LOG_ERR
conditions:
  • Unable to register the data to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000345 : "Call Unexpected"

level: LOG_ERR
conditions:
  • Call unexpected.
impact:
  • None
recommended_action:
  • None

0x1001000000000346 : "Exit err (%ret/%d)"

level: LOG_ERR
conditions:
  • Errors in exiting.
impact:
  • None
recommended_action:
  • None

0x1001000000000347 : "No slots in VLAN vlan_id (%swvl_vlan_name/%s) (%swvl_vlan_id/%d)"

level: LOG_INFO
conditions:
  • No slots in the VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000348 : "Partition is new but has no members yet(%ccp_name/%s)"

level: LOG_INFO
conditions:
  • Chassis partition is new but has no members yet.
impact:
  • None
recommended_action:
  • None

0x1001000000000349 : "Create new vlan for cluster (%ccp_name/%s)"

level: LOG_INFO
conditions:
  • Creating new VLAN for cluster.
impact:
  • None
recommended_action:
  • None

0x1001000000000350 : "Error, out of vlans, can't add vlan for cluster (%ccp_name/%s)"

level: LOG_ERR
conditions:
  • Unable to add the VLAN for cluster.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000351 : "No dataplane switch"

level: LOG_INFO
conditions:
  • No dataplane switch.
impact:
  • None
recommended_action:
  • None

0x1001000000000352 : "Cannot create mappi socket"

level: LOG_ERR
conditions:
  • Unable to create socket for management API.
impact:
  • None
recommended_action:
  • None

0x1001000000000353 : "mappi_connect failed => (%confd_strerror_rc/%s)"

level: LOG_ERR
conditions:
  • Unable to connect to management API.
impact:
  • None
recommended_action:
  • None

0x1001000000000354 : "maapi_start_user_session failed => (%confd_strerror_rc/%s)"

level: LOG_ERR
conditions:
  • Unable to start session in management API.
impact:
  • None
recommended_action:
  • None

0x1001000000000355 : "maapi_start_trans Failed => (%confd_strerror_m_thandle/%s)"

level: LOG_ERR
conditions:
  • Unable to start the transaction in management API.
impact:
  • None
recommended_action:
  • None

0x1001000000000356 : "maapi_set_namespace failed => (%confd_strerror_rc/%s)"

level: LOG_ERR
conditions:
  • Unable to set namespace in management API.
impact:
  • None
recommended_action:
  • None

0x1001000000000357 : "maapi_create failed for interface => (%if_name/%s) (%confd_strerror_rc/%s)"

level: LOG_ERR
conditions:
  • Failed to create configuration object in management API.
impact:
  • None
recommended_action:
  • None

0x1001000000000358 : "config/name => (%if_name/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to register the configuration name in ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000359 : "config/type => (%if_name/%s) (%type/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to register the type in ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000360 : "ethernet/config/type => (%if_name/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to register the ethernet type in ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000361 : "ethernet/config/duplex-mode => (%if_name/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to register the duplex mode in ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000362 : "Invalid cdb publish socket"

level: LOG_ERR
conditions:
  • Invalid CDB publish socket.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000363 : "failed to start CDB_OPERATIONAL data session => (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to start operational data session for CDB.
impact:
  • None
recommended_action:
  • None

0x1001000000000364 : "failed to set cdb name space => (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to set namespace in CDB.
impact:
  • None
recommended_action:
  • None

0x1001000000000365 : "Cannot fetch state for port , use defaults(%if_name/%s)"

level: LOG_INFO
conditions:
  • Unable to fetch state for the specified port.
impact:
  • None
recommended_action:
  • None

0x1001000000000366 : "cdb_set_values failed => (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to set values in CDB.
impact:
  • None
recommended_action:
  • None

0x1001000000000367 : "Failed to publish interfaces"

level: LOG_ERR
conditions:
  • Failed to publish the interfaces to CDB.
impact:
  • None
recommended_action:
  • None

0x1001000000000368 : "Initial cdb operdata publish attempt failed"

level: LOG_INFO
conditions:
  • Unable to publish the initial operational data to CDB.
impact:
  • None
recommended_action:
  • None

0x1001000000000369 : "Failed to open cdb_od_data_sock"

level: LOG_INFO
conditions:
  • Unable to connect to CDB data socket.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000370 : "Cannot allocate the pubsub structure"

level: LOG_ERR
conditions:
  • Unable to allocate pub/sub information.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000371 : "Platform initialization failed"

level: LOG_ERR
conditions:
  • Unable to initialize platform.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000372 : "Failed to set switchd opermode "

level: LOG_ERR
conditions:
  • Unable to change the operation mode.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000373 : "FAILED to obtain CCPEER floating ip"

level: LOG_ERR
conditions:
  • Unable to obtain the system controller peer floating IP address.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000374 : "Cannot initialize cc sw"

level: LOG_ERR
conditions:
  • Cannot initialize the system controller software.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000375 : "Cannot start sdk command service"

level: LOG_ERR
conditions:
  • Cannot start the SDK command service.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000376 : "/swcfg/switch[]/port[]/admin changed from to (%sw/%d) (%port/%d) (%swp_admnst_DNUP/%s) (%new_admnst_DNUP/%s)"

level: LOG_INFO
conditions:
  • Admin port changed.
impact:
  • None
recommended_action:
  • None

0x1001000000000377 : "admin state of port on switch transitions to (%port/%d) (%SWINST_SWNAME_swinst/%s) (%pcfg_snap_ports_port_admnst_DNUP/%s)"

level: LOG_INFO
conditions:
  • Admin state of the port changed.
impact:
  • None
recommended_action:
  • None

0x1001000000000378 : "Make operstat for switch port reflect admin state(%SWINST_SWNAME_swinst/%s) (%port/%d)"

level: LOG_INFO
conditions:
  • Making the operation stat reflect the admin state.
impact:
  • None
recommended_action:
  • None

0x1001000000000379 : "Failed to save stdout "

level: LOG_ERR
conditions:
  • Failed to save the standard output.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000380 : "fclose stdout ()(%errno/%d)"

level: LOG_ERR
conditions:
  • Unable to close standard output.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000381 : "fdopen(STDOUT_FILENO, \'w\') failed ()(%errno/%d)"

level: LOG_ERR
conditions:
  • Unable to open standard output.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000382 : "Failed to dup STDOUT_FILENO "

level: LOG_ERR
conditions:
  • Unable to duplicate the file number of standard output.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000383 : "fflush failed ()(%errno/%d)"

level: LOG_ERR
conditions:
  • Unable to flush the output.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000384 : "Close of stdout_sav() FAILED ()(%bcms_ss_stdout_sav/%d) (%errno/%d)"

level: LOG_ERR
conditions:
  • Unable to save the standard output.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000385 : "Restore of STDOUT_FILENO via dup2 failed ()(%errno/%d)"

level: LOG_ERR
conditions:
  • Unable to restore standard output file number.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000386 : "Cannot allocate rx buffer "

level: LOG_ERR
conditions:
  • Unable to allocate the RX buffer.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000387 : "STUBBED"

level: LOG_ERR
conditions:
  • Stubbed.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000388 : "Unable to ignore SIGPIPE "

level: LOG_ERR
conditions:
  • Unable to ignore SIGPIPE.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000389 : "getaddrinfo FAILED "

level: LOG_ERR
conditions:
  • Unable to get the network address information.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000390 : "socked fails (re ) for ai_family(), ai_socketype(), ai_protocol() (%rp_ai_family/%d) (%rp_ai_socktype/%d) (%rp_ai_protocol/%d)"

level: LOG_INFO
conditions:
  • Socket failed for specified options.
impact:
  • None
recommended_action:
  • None

0x1001000000000391 : "setsockopt FAILED "

level: LOG_ERR
conditions:
  • Unable to set the socket options.
impact:
  • None
recommended_action:
  • None

0x1001000000000392 : "Switchd command server unavailable Could not bind socket to any address"

level: LOG_ERR
conditions:
  • Switchd command server is unavailable.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000393 : "listen FAILED "

level: LOG_ERR
conditions:
  • Unable to listen for the incoming connection request.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000394 : "Accept failed "

level: LOG_ERR
conditions:
  • Unable to accept the incoming connection request.
impact:
  • None
recommended_action:
  • None

0x1001000000000395 : "bcmserv client already connected "

level: LOG_ERR
conditions:
  • The client is already connected to the BCM server.
impact:
  • None
recommended_action:
  • None

0x1001000000000396 : "failed to duplicate accept soc for input(%accsoc/%d)"

level: LOG_ERR
conditions:
  • Unable to duplicate the accepting socket for the input.
impact:
  • None
recommended_action:
  • None

0x1001000000000397 : "Cannot fdopen(accsoc, \'r\') => "

level: LOG_ERR
conditions:
  • Unable to open the file.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000398 : "close"

level: LOG_ERR
conditions:
  • Unable to close the file.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000399 : "Needs BCMSDK"

level: LOG_ERR
conditions:
  • BCM SDK undefined.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000400 : "BCM56XXD HAL message error: Trouble creating packet register error message:(%source_name/%s)"

level: LOG_ERR
conditions:
  • Unable to create packet for error message.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000401 : "BCM56XXD HAL message error: Trouble creating packet register error message payload:(%source_name/%s)"

level: LOG_ERR
conditions:
  • Unable to create payload for the error message.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000402 : "BCM56XXD info: Got a wrong unit: and working owner for trunk .(%unit/%d) (%workingOwner/%d) (%trunk_trunk_name/%s)"

level: LOG_INFO
conditions:
  • Got the wrong unit and working owner for trunk.
impact:
  • None
recommended_action:
  • None

0x1001000000000403 : "BCM56XXD HAL message error: Improper Packet Send message format"

level: LOG_ERR
conditions:
  • Improper message packet format.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000404 : "BCM56XXD info: Abort packet send request from on unit , port (%source_name/%s) (%sc_dev_unit/%d) (%sc_physport/%d)"

level: LOG_INFO
conditions:
  • Cancel packet send request from specified unit.
impact:
  • None
recommended_action:
  • None

0x1001000000000405 : "BCM56XXD driver error: Improper interface specified in Packet Request (%ifname/%s)"

level: LOG_ERR
conditions:
  • Improper interface in the packet request.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000406 : "BCM56XXD driver error: Trouble with packet registration (%prclient_id/%s)"

level: LOG_ERR
conditions:
  • Unable to register the packet.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000407 : "BCM56XXD HAL message error: Timeout zero, client: (%source_name/%s)"

level: LOG_ERR
conditions:
  • HAL timed out.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000408 : "BCM56XXD error: f5zmqmsg init failed"

level: LOG_ERR
conditions:
  • Unable to initialize F5 ZMQ message thread.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000409 : "BCM56XXD HAL error: Trouble creating F5ZMQMSG thread: 0x(%f5zmqmsg_th/%x)"

level: LOG_ERR
conditions:
  • Unable to create thread for F5ZMQMSG.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000410 : "BCM56XXD HAL message error: Trouble creating packet-to-client message payload: (%source_name/%s)"

level: LOG_ERR
conditions:
  • Unable to create payload for the packet.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support. If it persists, reboot.

0x1001000000000411 : "BCM56XXD HAL message error: Cannot identify source interface for client packet"

level: LOG_ERR
conditions:
  • Unable to identify the source interface for the client packet.
impact:
  • None
recommended_action:
  • None

0x1001000000000412 : "BCM56XXD info: halSetHigigMirror timeout: retrying..."

level: LOG_INFO
conditions:
  • Unable to set HiGig mirror. Retrying.
impact:
  • None
recommended_action:
  • None

0x1001000000000413 : "BCM56XXD HAL error: Error calling halHigigMirror: (%status/%d)"

level: LOG_ERR
conditions:
  • Unable to set HiGig mirror in HAL.
impact:
  • None
recommended_action:
  • None

0x1001000000000414 : "BCM56XXD driver error: Improper interface specified in (%SHELL_CMD_TRIGGER_FILE/%s) (%ifname/%s)"

level: LOG_ERR
conditions:
  • Improper interface in CMD.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000415 : "BCM56XXD info: -----------------------------------------"

level: LOG_INFO
conditions:
  • Debug information.
impact:
  • None
recommended_action:
  • None

0x1001000000000416 : "BCM56XXD info: BSC> (interface: unit:)(%cmd/%s) (%ifname/%s) (%sc_dev_unit/%d)"

level: LOG_INFO
conditions:
  • Information about the unit and current interface running.
impact:
  • None
recommended_action:
  • None

0x1001000000000417 : "BCM56XXD info: HAL Receive() non-zero result"

level: LOG_INFO
conditions:
  • HAL received non-zero result.
impact:
  • None
recommended_action:
  • None

0x1001000000000418 : "BCM56XXD info: : exiting(%FUNCTION/%s)"

level: LOG_INFO
conditions:
  • Exiting the function.
impact:
  • None
recommended_action:
  • None

0x1001000000000419 : "(%msg/%s)"

level: LOG_INFO
conditions:
  • Informational messages.
impact:
  • None
recommended_action:
  • None

0x1001000000000420 : "Received a message of type UNKNOWN"

level: LOG_INFO
conditions:
  • Received a message of type UNKNOWN.
impact:
  • None
recommended_action:
  • None

0x1001000000000421 : "Cannot read active status from HAL"

level: LOG_ERR
conditions:
  • Cannot read active status from HAL
impact:
  • None
recommended_action:
  • None

0x1001000000000422 : "Count rejected. Only default count() supported (%cnt/%d) (%SWITCHD_HAL_ITEM_INSTCNT_DFLT/%d)"

level: LOG_ERR
conditions:
  • Only a single instance of HAL item is currently supported.
impact:
  • None
recommended_action:
  • None

0x1001000000000423 : "Failed to fopen hal log file /var/log_controller/switchd-hal"

level: LOG_ERR
conditions:
  • Unable to open the HAL log file.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000424 : "Failed to fopen hal log file /dev/null"

level: LOG_ERR
conditions:
  • Unable to open the HAL log file.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000425 : "hal_init failed!"

level: LOG_ERR
conditions:
  • Unable to initialize HAL.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000426 : "FAILED to get chassis slot number"

level: LOG_ERR
conditions:
  • Unable to get the chassis slot number.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000427 : "FAILED to get number of blade slots"

level: LOG_ERR
conditions:
  • Unable to get the number of blade slots.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000428 : "FAILED to get host type"

level: LOG_ERR
conditions:
  • Unable to get the host type.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000429 : "Nailing up platform parameters. Assuming (%switchd_rdoptshosttype/%s)"

level: LOG_INFO
conditions:
  • Nailing up the platform parameters.
impact:
  • None
recommended_action:
  • None

0x1001000000000430 : "Cannot determine hardware platform"

level: LOG_ERR
conditions:
  • Unable to determine the hardware platform.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000431 : "host type is not presently supported by swtichd(%switchd_hal_item_ccrtci_base_cc_host_type/%s)"

level: LOG_ERR
conditions:
  • Host type is not supported by switchd.
impact:
  • None
recommended_action:
  • Choose a different host type.

0x1001000000000432 : "SLOT FORCED ACTIVE as (%switchd_hal_item_ccrtci_base_cc_slot_local/%d) (%switchd_rdoptsuflagsforce_active_CC_SWITCHD_FORCEACTIVE_OPERMODE_per_opermode_switchd_rdoptsuflagsforce_active_CC_SWITCHD_FORCEACTIVE_ACTIVE_active_stby/%s)"

level: LOG_NOTICE
conditions:
  • Slot is forced active.
impact:
  • None
recommended_action:
  • None

0x1001000000000433 : "Live Hal: host type , number of cc slots number of blade slots this cc slot (%switchd_hal_item_ccrtci_base_cc_host_type/%s) (%switchd_hal_item_ccrtci_base_cc_slots/%d) (%switchd_hal_item_ccrtci_base_cc_blade_slots/%d) (%switchd_hal_item_ccrtci_base_cc_slot_local/%d)"

level: LOG_INFO
conditions:
  • Information from HAL.
impact:
  • None
recommended_action:
  • None

0x1001000000000434 : "expr() file() line()(%expr/%s) (%file/%s) (%line/%d)"

level: LOG_ERR
conditions:
  • Assertion line in the BCM SDK.
impact:
  • None
recommended_action:
  • None

0x1001000000000435 : "switchd running w/o bcmsdk "

level: LOG_INFO
conditions:
  • Switchd is running without BCM SDK.
impact:
  • None
recommended_action:
  • None

0x1001000000000436 : "Error fetching local slot"

level: LOG_ERR
conditions:
  • Unable to fetch local slot.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000437 : "Creating vlan id (%vname/%s) (%vid/%d)"

level: LOG_NOTICE
conditions:
  • Creating VLAN ID.
impact:
  • None
recommended_action:
  • None

0x1001000000000438 : "Error creating VLAN id(), name() => rc(%vid/%d) (%vname_vname_anonymouns/%s) (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to create VLAN ID.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000439 : "Failed to ADD members to VLAN (%vid/%d)"

level: LOG_ERR
conditions:
  • Unable to add members to VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000440 : "Failed to REMOVE members to VLAN (%vid/%d)"

level: LOG_ERR
conditions:
  • Unable to remove members from VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000441 : "vlan id() name() is empty; deleting(%vid/%d) (%vname_vname_anonymous/%s)"

level: LOG_NOTICE
conditions:
  • VLAN ID or name is empty. Deleting.
impact:
  • None
recommended_action:
  • None

0x1001000000000442 : "switchd_bs_vlan_update(upd = CC_SWITCHD_VLANHW_DESTROY, vid = ) FAILED => (%vid/%d) (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to destroy the VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000443 : "Unknown action"

level: LOG_ERR
conditions:
  • Unknown action.
impact:
  • None
recommended_action:
  • None

0x1001000000000444 : "lagg should not be busy!(%laggs_num_laggs/%d)"

level: LOG_ERR
conditions:
  • Link aggregation group (LAG) should not be busy.
impact:
  • None
recommended_action:
  • None

0x1001000000000445 : "No mo free lagg entries"

level: LOG_ERR
conditions:
  • There are no more free link aggregation group (LAG) entries.
impact:
  • None
recommended_action:
  • None

0x1001000000000446 : "Cannot allocate new lagg"

level: LOG_ERR
conditions:
  • Unable to allocate new link aggregation group (LAG).
impact:
  • None
recommended_action:
  • None

0x1001000000000447 : "lagg is allocated but not busy???(%lagg_idx/%d)"

level: LOG_ERR
conditions:
  • The link aggregation group (LAG) is allocated, but not busy.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000448 : "Setup of lage failed(%lagg_idx/%d)"

level: LOG_ERR
conditions:
  • Unable to set up link aggregation group (LAG).
impact:
  • None
recommended_action:
  • None

0x1001000000000449 : "Failed to populate cluster interfaces"

level: LOG_ERR
conditions:
  • Unable to populate cluster interfaces.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000450 : "FAILED to create overlay network laggs"

level: LOG_ERR
conditions:
  • Unable to create overlay network link aggregation groups (LAGs).
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000451 : "Cannot determine fixed overlay vlans"

level: LOG_ERR
conditions:
  • Unable to determine fixed overlay VLANs.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000452 : "base switch init failed: (%rc/%d)"

level: LOG_ERR
conditions:
  • Unable to initialize the base switch.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000453 : "FAILED to initialize overlay switch"

level: LOG_ERR
conditions:
  • Unable to initialize the overlay switch.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000454 : "Failed to get vlan port role map"

level: LOG_ERR
conditions:
  • Unable to get VLAN port role map.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000455 : "Failed to add CCHOST to map"

level: LOG_ERR
conditions:
  • Unable to add CCHOST ports to VLAN mapping.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000456 : "Failed to add CCPEER to map"

level: LOG_ERR
conditions:
  • Unable to add system controller peer ports to VLAN mapping.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000457 : "UNKNOWN op()(%switchd_act/%d)"

level: LOG_ERR
conditions:
  • Unknown operation from the switch.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000458 : "Error fetching local ha active status"

level: LOG_ERR
conditions:
  • Unable to fetch local high availability (HA) active status.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000459 : "Nover overlay switch"

level: LOG_ERR
conditions:
  • There is no overlay switch.
impact:
  • None
recommended_action:
  • None

0x1001000000000460 : "BCM56XXD driver error: Unable to find vlan member in vlan :(%sc_ifname/%s) (%vlan_vid/%d) (%vlan_cvid/%d)"

level: LOG_ERR
conditions:
  • Unable to find member in the VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000461 : "BCM56XXD SDK error: failed: SDK error (%funct_name/%s) (%bcm_errmsg_rv/%s)"

level: LOG_ERR
conditions:
  • SDK error.
impact:
  • None
recommended_action:
  • Restart the container and reboot the system controller. If the problem persists, please contact F5 Support.

0x1001000000000462 : "Message from BHW. (%bhw_msg/%s)"

level: LOG_INFO
conditions:
  • Message from Broadcom Hardware (BHW) library.
impact:
  • None
recommended_action:
  • None

0x1001000000000463 : "Message from BHW. (%bhw_msg/%s)"

level: LOG_ERR
conditions:
  • Message from Broadcom Hardware (BHW) library.
impact:
  • None
recommended_action:
  • None

0x1001000000000464 : "BCM56XXD HAL message error: Cannot determine RX endpt"

level: LOG_ERR
conditions:
  • Unable to determine the receiving endpoint.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000465 : "BCM56XXD HAL message error: Cannot find send handle for (%zmq_addr/%s)"

level: LOG_ERR
conditions:
  • Unable to send the handle for the specified address.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000466 : "BCM56XXD driver error: No interface or trunk provided for packet client send"

level: LOG_ERR
conditions:
  • No interface for sending packet.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000467 : "Memory allocation failed: buf alloc failed"

level: LOG_ERR
conditions:
  • Cannot allocate entry due to insufficient memory.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000468 : "SWITCHD_F5ZMQ message error: Failed to pack switchd f5zmq msg"

level: LOG_ERR
conditions:
  • Failed to pack ZMQ message.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000469 : "BCM56XXD HAL message error: switchd f5zmq add payload failure"

level: LOG_ERR
conditions:
  • Unable to add payload to the ZMQ message.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000470 : "switchd halhealth message error: Unable to initialize health reporting"

level: LOG_ERR
conditions:
  • Unable to initialize health reporting.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000471 : "BCM56XXD HAL message error: Trouble creating F5ZMQMSG thread: 0x(%f5zmqmsg_th/%x)"

level: LOG_ERR
conditions:
  • Unable to create ZMQ message thread.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000482 : "BCM56XXD HAL message error: Error calling halHigigMirror: (%status/%d)"

level: LOG_ERR
conditions:
  • Unable to set HiGig mirror in HAL.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000483 : "SWITCHD_F5ZMQ: fzmq_init_thread_safe: rc() log and continue(%rc/%d)"

level: LOG_INFO
conditions:
  • Unable to initialize thread for F5ZMQ.
impact:
  • None
recommended_action:
  • None

0x1001000000000484 : "(%cbp/%s)"

level: LOG_NOTICE
conditions:
  • Log notice from the switch.
impact:
  • None
recommended_action:
  • None

0x1001000000000485 : "Linkstatus change (%PORT/%s) (%LINKSTAT/%s)"

level: LOG_NOTICE
conditions:
  • Change in link status.
impact:
  • None
recommended_action:
  • None

0x1001000000000486 : "(%ERRMSG/%s)"

level: LOG_ERR
conditions:
  • Unable to add port to link aggregation group (LAG).
impact:
  • None
recommended_action:
  • None

0x1001000000000487 : "config/minlinks => (%if_name/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Links in the configuration.
impact:
  • None
recommended_action:
  • None

0x1001000000000488 : "config/laggtype => (%if_name/%s) (%type/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to publish link aggregation group (LAG) type to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000489 : "config/port laggid => (%if_name/%s) (%confd_strerror_confd_errno/%s)"

level: LOG_ERR
conditions:
  • Unable to set link aggregation group (LAG) ID to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000490 : "config/socket"

level: LOG_ERR
conditions:
  • Unable to create socket for management API.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000491 : "config/lacp intf => (%if_name/%s) (%confd_strerror/%s)"

level: LOG_ERR
conditions:
  • Unable to update Link Aggregation Control Protocol (LACP) in ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000492 : "config/lagg port => (%port/%s) (%confd_strerror/%s)"

level: LOG_ERR
conditions:
  • Unable to publish link aggregation group (LAG) port to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000493 : "config/lagg (%laggname/%s)"

level: LOG_ERR
conditions:
  • Unable to update Link Aggregation Control Protocol (LACP) in ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000494 : "final switch init failed: (%rc/%d)"

level: LOG_ERR
conditions:
  • Final switch initialization failed.
impact:
  • None
recommended_action:
  • Try restarting the container. If it persists, contact your internal support.

0x1001000000000495 : "SWITCHD_CMD_BCMSERV: Cannot create cmd_bcmserv thread (%pthcr_err/%d)"

level: LOG_ERR
conditions:
  • Unable to create a thread for BCM command server.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000496 : "SWITCHD_CMD_BCMSERV: Cannot join cmd_bcmserv thread err: (%pthjo_err/%d)"

level: LOG_ERR
conditions:
  • Unable to join the thread for BCM command server.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000497 : "SWITCHD_CMD_BCMSERV: cmd_bcmserv thread restarting. Exit err: (%pthjo_err/%d)"

level: LOG_INFO
conditions:
  • BCM command server thread is restarting.
impact:
  • None
recommended_action:
  • None

0x1001000000000498 : "SWITCHD_CONFD: ConfD error signalled: attempting ConfD recconnect"

level: LOG_NOTICE
conditions:
  • Error in ConfD. Reconnecting to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000499 : "SWITCHD_CONFD: Error publishing operdata: attempting ConfD reconnect"

level: LOG_NOTICE
conditions:
  • Unable to publish operational data. Reconnecting to ConfD.
impact:
  • None
recommended_action:
  • None

0x1001000000000501 : "SWITCHD_BS_ING2EGR: configuring an ingress to egress limit for (%portrole_st/%s)"

level: LOG_ERR
conditions:
  • Unable to configure ingress/egress limit.
impact:
  • None
recommended_action:
  • None

0x1001000000000502 : "BCM56XXD error: Adding trunk to vlan failed(%sc_ifname/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to add trunk to VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000503 : "BCM56XXD error: Deleting trunk from vlan failed(%sc_ifname/%s) (%vname/%s)"

level: LOG_ERR
conditions:
  • Unable to delete trunk from VLAN.
impact:
  • None
recommended_action:
  • None

0x1001000000000505 : "SWITCHD_PTHREAD: (%op/%s) failed for (%mutex/%s)"

level: LOG_ERR
conditions:
  • Specified operation failed for the mutual exclusion object.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000506 : "SWITCHD_PTHREAD: (%op/%s) failed for (%thread/%s")"

level: LOG_ERR
conditions:
  • Specified operation failed for the thread.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000507 : "SWITCHD_MGMTPORT: Unable to set MGMT port enabled status. (%bcm_errmsg/%s) (%ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to set the enabled status of the management port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.

0x1001000000000508 : "SWITCHD_MGMTPORT: Unable to get MGMT port enabled status. (%bcm_errmsg/%s) (%ifname/%s)"

level: LOG_ERR
conditions:
  • Unable to get the enabled status of the management port.
impact:
  • None
recommended_action:
  • Reboot the system controller. If it persists, contact F5 Support.