.. _getting-started: Getting Started =============== Please follow the instructions provided by the instructor to start your lab and access your jump host. .. NOTE:: All work for this lab will be performed exclusively from the Linux Workstation jumphost. No installation or interaction with your local system is required. Lab Topology ^^^^^^^^^^^^^ |image2| Lab Components ^^^^^^^^^^^^^^^ The following table lists VLANS, IP Addresses and Credentials for all components: .. list-table:: :widths: 20 40 40 :header-rows: 1 * - **Component** - **VLAN/IP Address(es)** - **Credentials** * - bigip01 - - **Management:** 10.1.1.245 - **Internal:** 10.1.20.245 - **External:** 10.1.10.245 - ``admin``/``admin`` * - bigip02 - - **Management:** 10.1.1.246 - **Internal:** 10.1.20.246 - **External:** 10.1.10.246 - ``admin``/``admin`` * - Ubuntu Linux Workstation - - **eth0:** 10.1.1.51 - **eth1:** 10.1.10.51 - ``f5student``/``f5DEMOs4u`` * - Kali Linux Workstation - - **eth0:** 10.1.10.60 - ``root``/``f5DEMOs4u`` Accessing Lab Environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Please follow the instructions below to access the lab environment. 1. Open a browser and go to http://training.f5agililty.com/ |training_portal| 2. Use the class number and student number included on the class survey to login to the training portal. Once logged in: a. Look for the **xubuntu-jumpbox-vxx**. You will use the |xj| for all the labs. (see below) |image3| b. You can click on **RDP** to RDP to the |xj|, or you can select the **CONSOLE** link and access the jumpbox via your browser. **The CONSOLE link requires you turn off pop-up blockers.** |image4| .. |image2| image:: _images/image2.png :width: 6.59740in :height: 5.73203in .. |training_portal| image:: _images/training_portal.png :width: 6.59740in :height: 5.73203in .. |image3| image:: _images/image3.png :width: 3.77500in :height: 2.87104in .. |image4| image:: _images/image4.png :width: 3.36587in :height: 3.04167in