TMSH CommandsΒΆ

Cut and paste these commands at the TMSH prompt (tmos)#:

#
# bigip01
#
# Client-side networking
create net vlan client_vlan interfaces add { 1.1 { untagged } }
create net self client_ip address 10.1.10.245/24 vlan client_vlan

# Server-side networking
create net vlan server_vlan interfaces add { 1.2 { untagged } }
create net self server_ip address 10.1.20.245/24 vlan server_vlan

# Default route
create net route def_gw network 0.0.0.0/0 gw 10.1.10.1

# Pool and Virtual Server v11.5.3
create ltm pool www_pool members add { 10.1.20.11:80 10.1.20.12:80 10.1.20.13:80 } monitor http
create ltm virtual www_vs destination 10.1.10.100:80 pool www_pool ip-protocol tcp source-address-translation { type automap }

# Write changes to disk
save sys config

# Archive your change
save sys ucs lab1-base-config