================== rSeries Appliances ================== r12000-DS Series - r12600-DS / r12800-DS / r12900-DS ========================================== The r12000-DS (rSeries) is a 1RU appliance that has 3 different Pay-as-you-Grow licensing options that unlock more CPU resources. The r12600-DS is the base system and Pay-as-you-Grow (PAYG) licensing options exist to upgrade to the r12800-DS, or r12900-DS models. There are both AC power versions of the appliance, and DC power versions that are available. The system comes standard with 2 power supplies. The r12000-DS platform has 36 physical CPU cores / 72 vCPUs, however 12 of the vCPUs are dedicated to the F5OS platform layer. Additionally, some vCPUs are disabled on the r12600-DS and r12800-DS models to provide different price / performance profiles, which can be unlocked through PAYG licensing. The system also supports 512GB of RAM and has dual 2TB SSD's that are RAID-1 mirrored. Below is a picture of the r12000-DS hardware appliance which can be licensed as an r12600-DS, r12800-DS, or r12900-DS. It is the same hardware platform for these 3 software licensing options. .. image:: images/rseries_appliances/r12000image1.png :align: center :scale: 100% The r12000-DS Series appliance has 4 x 100Gb/40Gb ports that support QSFP28/QSFP+ optics as well as 16 x 25Gb/10Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/r12000image2.png :align: center :scale: 100% Note that adjacent highspeed (40Gb / 100Gb) ports (**1.0** & **2.0** or **11.0** & **12.0**) must be configured for the same speed. You cannot have one port at 40Gb and the other at 100Gb currently. You can have ports 1.0 and 2.0 at one speed, and 11.0 & 12.0 at another. Also, the high-speed ports do not support unbundling into lower speeds (25Gb / 10Gb); only 40Gb or 100Gb are supported on those ports. For the low-speed ports (**3.0** - **10.0** & **13.0** - **20.0**) any combination of 10Gb or 25Gb is supported. The SFP28 ports are backwards compatible with SFP+. .. image:: images/rseries_appliances/image1b.png :align: center :scale: 100% The r12000-DS appliance has a single 1Gb Ethernet out-of-band management port, a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering/reinstalling system software. LEDs will change color to indicate different port speeds, and high- level LEDs provide Status, Alarm, and power supply status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image1c.png :align: center :scale: 100% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r12000-DS is removable and serviceable. .. image:: images/rseries_appliances/image1d.png :align: center :scale: 100% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r12000-DS is removable and serviceable. .. image:: images/rseries_appliances/image1e.png :align: center :scale: 100% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r12000-DS is removable and serviceable. .. image:: images/rseries_appliances/image1f.png :align: center :scale: 100% r10000 Series - r10600 / r10800 / r10900 ========================================== The r10000 (rSeries) is a 1RU appliance that has 3 different Pay-as-you-Grow licensing options that unlock more CPU resources. The r10600 is the base system and Pay-as-you-Grow (PAYG) licensing options exist to upgrade to the r10800, or r10900 models. There are both AC power versions of the appliance, and DC power versions that are available. The system comes standard with 2 power supplies. The r10000 platform has 24 physical CPU cores / 48 vCPUs, however 12 of the vCPUs are dedicated to the F5OS platform layer. Additionally, some vCPUs are disabled on the r10600 and r10800 models to provide different price / performance profiles, which can be unlocked through PAYG licensing. The system also supports 256GB of RAM and has dual 1TB SSD's that are RAID-1 mirrored. Below is a picture of the r10000 hardware appliance which can be licensed as an r10600, r10800, or r10900. It is the same hardware platform for these 3 software licensing options. .. image:: images/rseries_appliances/image1.png :align: center :scale: 100% The r10000 Series appliance has 4 x 100Gb/40Gb ports that support QSFP28/QSFP+ optics as well as 16 x 25Gb/10Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/image1a.png :align: center :scale: 100% Note that adjacent highspeed (40Gb / 100Gb) ports (**1.0** & **2.0** or **11.0** & **12.0**) must be configured for the same speed. You cannot have one port at 40Gb and the other at 100Gb currently. You can have ports 1.0 and 2.0 at one speed, and 11.0 & 12.0 at another. Also, the high-speed ports do not support unbundling into lower speeds (25Gb / 10Gb); only 40Gb or 100Gb are supported on those ports. For the low-speed ports (**3.0** - **10.0** & **13.0** - **20.0**) any combination of 10Gb or 25Gb is supported. The SFP28 ports are backwards compatible with SFP+. .. image:: images/rseries_appliances/image1b.png :align: center :scale: 100% The r10000 appliance has a single 1Gb Ethernet out-of-band management port, a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering/reinstalling system software. LEDs will change color to indicate different port speeds, and high- level LEDs provide Status, Alarm, and power supply status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image1c.png :align: center :scale: 100% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r10000 is removable and serviceable. .. image:: images/rseries_appliances/image1d.png :align: center :scale: 100% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r10000 is removable and serviceable. .. image:: images/rseries_appliances/image1e.png :align: center :scale: 100% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r10000 is removable and serviceable. .. image:: images/rseries_appliances/image1f.png :align: center :scale: 100% r10000 Series - r10920-DF (FIPS) ========================================== The r10920-DF (rSeries) is a 1RU appliance that has an integrated HSM for secure key storage. There are both AC power versions of the appliance, and DC power versions that are available. The system comes standard with 2 power supplies. The r10920-DF platform has 24 physical CPU cores / 48 vCPUs, however 12 of the vCPUs are dedicated to the F5OS platform layer. The system also supports 256GB of RAM and has dual 1TB SSD's that are RAID-1 mirrored. Below is a picture of the r10920-DF hardware appliance. .. image:: images/rseries_appliances/image1.png :align: center :scale: 100% The r10920-DF Series appliance has 4 x 100Gb/40Gb ports that support QSFP28/QSFP+ optics as well as 16 x 25Gb/10Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/image1afips.png :align: center :scale: 100% Note that adjacent highspeed (40Gb / 100Gb) ports (**1.0** & **2.0** or **11.0** & **12.0**) must be configured for the same speed. You cannot have one port at 40Gb and the other at 100Gb currently. You can have ports 1.0 and 2.0 at one speed, and 11.0 & 12.0 at another. Also, the high-speed ports do not support unbundling into lower speeds (25Gb / 10Gb); only 40Gb or 100Gb are supported on those ports. For the low-speed ports (**3.0** - **10.0** & **13.0** - **20.0**) any combination of 10Gb or 25Gb is supported. The SFP28 ports are backwards compatible with SFP+. .. image:: images/rseries_appliances/image1b.png :align: center :scale: 100% The r10920-DF appliance has a single 1Gb Ethernet out-of-band management port, a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering/reinstalling system software. LEDs will change color to indicate different port speeds, and high- level LEDs provide Status, Alarm, and power supply status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image1c.png :align: center :scale: 100% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r10920-DF is removable and serviceable. .. image:: images/rseries_appliances/image1d.png :align: center :scale: 100% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r10920-DF is removable and serviceable. .. image:: images/rseries_appliances/image1e.png :align: center :scale: 100% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with both power supplies included. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. The fan tray on the r10920-DF is removable and serviceable. .. image:: images/rseries_appliances/image1f.png :align: center :scale: 100% r5000 Series - r5600 / r5800 / r5900 ==================================== The r5000 (rSeries) is a 1RU appliance that has 3 different licensing options that unlock more CPU resources. The r5600 is the base system, and PAYG licensing options exist to upgrade to the r5800, or r5900 models. At initial shipment, there is an AC power version of the appliance and DC power versions will be made available in the future. The r5000 platform has 16 physical CPU cores / 32 vCPUs, however 6 of the vCPUs are dedicated to the F5OS platform layer. Additionally, some vCPUs are disabled on the r5600 and r5800 models to provide different price / performance profiles which can be unlocked through PAYG licensing. The system also supports 128GB of RAM and has a single 1TB SSD. There is no option for dual/redundant disks on the r5000, you'll need to go to the r10000 model if dual / redundant disk is a requirement. Below is a picture of the r5000 hardware appliance which can be licensed as an r5600, r5800, or r5900. It's the same hardware platform for these 3 software licensing options. .. image:: images/rseries_appliances/image2.png :align: center :scale: 100% The r5000 appliance has 2 x 100Gb/40Gb ports that support QSFP28/QSFP+ optics as well as 8 x 25Gb/10Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/image2a.png :align: center :scale: 100% Note that adjacent high-speed (40Gb / 100Gb) ports (**1.0** & **2.0**) must be configured for the same speed. You cannot have one port at 40Gb and the other at 100Gb. Also, the high-speed ports do not support unbundling into lower speeds (25Gb / 10Gb), only 40Gb or 100Gb are supported. For the low-speed ports (**3.0** - **10.0**) any combination of 10Gb or 25Gb is supported. The SFP28 ports are backwards compatible with SFP+. .. image:: images/rseries_appliances/image2b.png :align: center :scale: 100% The r5000 has a single 1Gb Ethernet out-of-band management port and a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering/reinstalling system software. LEDs will change color to indicate different port speeds, and high- level LEDs provide Status, Alarm, and Power Supply Status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image2c.png :align: center :scale: 100% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image2d.png :align: center :scale: 100% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image2e.png :align: center :scale: 100% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image2f.png :align: center :scale: 100% r5000 Series - r5920-DF (FIPS) ============================== The r5920-DF (rSeries) is a 1RU appliance with an integrated HSM for secure key storage. There is an AC power version of the appliance as well as DC power versions that are available. The r5920-DF platform has 16 physical CPU cores / 32 vCPUs, however 6 of the vCPUs are dedicated to the F5OS platform layer. The system also supports 128GB of RAM and has dual 1TB U.2 SSD drives that are RAID1 mirrored. Below is a picture of the r5920-DF hardware appliance. .. image:: images/rseries_appliances/image2.png :align: center :scale: 100% The r5000 appliance has 2 x 100Gb/40Gb ports that support QSFP28/QSFP+ optics as well as 8 x 25Gb/10Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/image2afips.png :align: center :scale: 100% Note that adjacent high-speed (40Gb / 100Gb) ports (**1.0** & **2.0**) must be configured for the same speed. You cannot have one port at 40Gb and the other at 100Gb. Also, the high-speed ports do not support unbundling into lower speeds (25Gb / 10Gb), only 40Gb or 100Gb are supported. For the low-speed ports (**3.0** - **10.0**) any combination of 10Gb or 25Gb is supported. The SFP28 ports are backwards compatible with SFP+. .. image:: images/rseries_appliances/image2b.png :align: center :scale: 100% The r5000 has a single 1Gb Ethernet out-of-band management port and a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering/reinstalling system software. LEDs will change color to indicate different port speeds, and high- level LEDs provide Status, Alarm, and Power Supply Status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image2c.png :align: center :scale: 100% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image2d.png :align: center :scale: 100% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image2e.png :align: center :scale: 100% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image2f.png :align: center :scale: 100% r4000 Series - r4600 / r4800 ============================ The r4000 (rSeries) is a 1RU appliance that has 2 different licensing options that unlock more CPU resources. The r4600 is the base system, and PAYG licensing options exist to upgrade to the r4800 model. At initial shipment, there is an AC power version of the appliance and DC power versions will be made available in the future. The r4000 platform has 16 physical CPU cores and hyperthreading is not used. No CPUs are dedicated to the F5OS platform layer which is different than the mid-range and high-end rSeries appliances. Additionally, some CPUs are disabled on the r4600 model to provide different price/performance profiles which can be unlocked through PAYG licensing. The system also supports 64GB of RAM and has a single 480GB SSD. There is no option for dual/redundant disk on the r4000, you'll need to go to the r10000 if dual/redundant disk is a requirement. Below is a picture of the r4000 hardware appliance which can be licensed as an r4600 or r4800. It's the same hardware platform for these 2 software licensing options. .. image:: images/rseries_appliances/image3.png :align: center :scale: 160% The r4000 appliance has 4 x 10Gb/1Gb copper ports as well as 4 x 25Gb/10Gb/1Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/image3a.png :align: center :scale: 90% The r4000 has a single 1Gb Ethernet out-of-band management port and a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering / reinstalling system software. LEDs will change color to indicate different port speeds, and high-level LEDs provide Status, Alarm, and Power Supply Status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image3b.png :align: center :scale: 70% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image3c.png :align: center :scale: 70% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image3d.png :align: center :scale: 70% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image3e.png :align: center :scale: 70% r2000 Series - r2600 / r2800 ============================ The r2000 (rSeries) is a 1RU appliance, that has 2 different licensing options that unlock more CPU resources. The r2600 is the base system, and PAYG licensing options exist to upgrade to the r2800 model. At initial ship there is an AC power version of the appliance and DC power versions will be made available in the future. The r2000 platform has 8 physical CPU cores and hyperthreading is not used. No CPUs are dedicated to the F5OS platform layer which is different than the mid-range and high-end rSeries appliances. Additionally, some CPUs are disabled on the r2600 model to provide different price/performance profiles which can be unlocked through PAYG licensing. The system also supports 32GB of RAM and has a single 480GB SSD. There is no option for dual/redundant disk on the r2000, you'll need to migrate to the r10000 if dual/redundant disk is a requirement. Below is a picture of the r2000 hardware appliance which can be licensed as an r2600 or r2800. It's the same hardware platform for these 2 software licensing options. .. image:: images/rseries_appliances/image4.png :align: center :scale: 160% The r2000 appliance has 4 x 10Gb/1Gb copper ports as well as 4 x 25Gb/10Gb/1Gb ports that support SFP+/SFP28 optics. .. image:: images/rseries_appliances/image4a.png :align: center :scale: 90% The r2000 has a single 1Gb Ethernet out-of-band management port and a serial console port, and a serial (hard wired) failover port which is not utilized or supported. A USB3.0 port is also made available for recovering/reinstalling system software. LEDs will change color to indicate different port speeds, and high-level LEDs provide Status, Alarm, and Power Supply Status. The appliance also has an LCD panel. .. image:: images/rseries_appliances/image4b.png :align: center :scale: 70% In the back of the AC power model are 2 power supplies and AC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image3c.png :align: center :scale: 70% In the back of the DC power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image3d.png :align: center :scale: 70% In the back of the HVDC (High Voltage DC) power model (future) are 2 power supplies and DC inputs. The system ships with one power supply included, and the second is optional. The back of the system also has a **Chassis Ground Terminal** which can be used when performing maintenance. .. image:: images/rseries_appliances/image3e.png :align: center :scale: 70%