.. role:: red
.. role:: bred

Lab 4.3: Attach the SSLO objects to an existing LTM application
---------------------------------------------------------------

The Existing Application topology workflow produces a single SSLO per-request
policy. To attach this to the LTM virtual server, edit the virtual server
previously created.

#. Go to :menuselection:`Local Traffic --> Virtul Servers` and select your
   virtual server created in Lab 4.1. Modify the following properties:

   - **Access Policy (Access Profile**): attach the single
     ":red:`ssloDefault_accessProfile`".
   - **Access Policy (Per-Request Policy)**: attach the
     :red:`existing_app_1_per_req_policy`.

     .. note:: The name may differ depending on the name used in prevous Lab.

   - Click :guilabel:`Update`
   
#. Test your virtual servers with the attached SSLO policy.

   - RDP to the :bred:`Inbound Windows client`.
   - Browse to https://10.30.0.205 or if you added a host entry earlier
     https://www.f5labs.com
   - SSH to the SSLO appliance. A tcpdump on the source side FireEye VLAN
     should showthe VS traffic traversing FireEye:

  .. code-block:: bash

     tcpdump -lnni ssloN_FireEye_in.app/ssloN_FireEye_in -Xs0 host 10.30.0.205