.. role:: red
.. role:: bred

Login and review the UDF lab hosts and endpoints
===============================================================================

If needed, review the previous section
`SSL Orchestrator Lab Environment <../labinfo.html>`_.

**For this lab:**

-  Using your web browser (Chrome/Chromium preferred), open a :red:`TMUI (HTTPS)` session 
   to the :red:`SSLO Primary` component via UDF. 
-  Login as :red:`admin` with password :red:`agility`.

.. note:: There are no additional hands-on steps that need to be taken before proceeding to the next section.  The information below is intended to provide additional context regarding how the UDF lab hosts are connected and how they relate to each other.

-  The **Ubuntu18.04 Client** is attached to the :red:`10.1.10.0/24` network on 
   IP address :red:`10.1.10.50`, which is attached to the BIG-IP 
   :red:`1.1` interface for :red:`outbound` testing.  It is also attached to the  
   :red:`10.1.20.0/24` network on IP address :red:`10.1.20.50`, which is attached 
   to the BIG-IP :red:`1.2` interface for :red:`inbound` testing.

-  The **L2 device** is an Ubuntu 18.04 LTS server configured to bridge its eth1
   and eth2 interfaces. Its inbound VLAN (traffic to it) is attached to the
   BIG-IP :red:`1.4` interface. Its outbound interface (traffic coming from it)
   is attached to the BIG-IP :red:`1.5` interface.

-  The **L3 device** is a docker container on Ubuntu 18.04 LTS server, which is configured to route between
   its ens6.60 and ens.70 (tagged) interfaces. Its inbound VLAN (traffic to it)
   is attached to the BIG-IP :red:`1.3 (VLAN tag 60)` interface and has an IP of
   :red:`198.19.64.30/25`. Its outbound interface (traffic coming from it) is
   attached to the BIG-IP :red:`1.3 (VLAN tag 70)` interface and has an IP of
   :red:`198.19.64.130/25`. Its default gateway is :red:`198.19.64.245`, which
   will be a VLAN self-IP on the BIG-IP.

-  The **TAP** device is an Ubuntu 18.04 LTS server configured with a single
   eth1 interface. That interface is attached to the BIG-IP :red:`1.6`
   interface.

-  The **DLP/ICAP** device is a docker container on Ubuntu 18.04 LTS server configured with a
   single eth1 interface. That interface is attached to the BIG-IP :red:`1.3 (VLAN tag 50)`
   interface and has an IP of :red:`198.19.97.50 and listening on port 1344`. The
   box is running c-icap and Squid/Clamav.

-  The **Explicit Proxy device** is a docker container on Ubuntu 18.04 LTS server configured with
   Squid. Its interfaces are ens6.30 and ens6.40 (tagged). Its inbound VLAN
   (traffic to it) is attached to the BIG-IP :red:`1.3 (VLAN tag 30)` interface
   and has an IP of :red:`198.19.96.30/25`. Its outbound interface (traffic
   coming from it) is attached to the BIG-IP :red:`1.3 (VLAN tag 40)` interface
   and has an IP of :red:`198.19.96.130/25`. Its default gateway is
   :red:`198.19.96.245`, which will be a VLAN self-IP on the BIG-IP.

-  The outbound network is attached to the BIG-IP :red:`1.2` interface, in the
   :red:`10.1.20.0/24` subnet, and has a gateway of :red:`10.1.20.1`.

.. note:: In this lab, the client inbound, Internet outbound, and DLP VLANs and
   self-IPs are already created.