F5 BIG-IP SSL Orchestrator Training Lab > Class 2: SSL Orchestration v5 (Ravello) > Module 6 - Create Outbound Channels for Services Source | Edit on

Lab 6.1: Create an L3 Outbound service channel through Guided Configuration

Note

For this module, the inline proxy service simply needs external DNS access to 8.8.8.8 UDP.

  • Configuration review and prerequisites - take a moment to review the topology options and workflow configuration, then click Next.

  • Topology Properties

    • Name: provide some name (ex. “proxy_sc_dns”)
    • Protocol: UDP
    • IP Family: IPv4
    • Topology: select L3 Outbound
    • Click Save & Next
  • Services List - there are no new services to create.

    • Click Save & Next
  • Services Chain List - there are no new service chains to create.

    • Click Save & Next
  • Security Policy - service channel traffic cannot pass through the inspection services, so the security policy must be empty, with the “All Traffic” rule set to Allow, bypass SSL, and with no assigned service chain.

    • Click Save & Next
  • Interception Rule

    • Select Custom outbound rule type and click Show Advanced Setting (top right).
    • Source Address - this will be the source address of the inline proxy server. The proxy server’s default route is through its outbound interface, so the source address in this case will be 198.19.96.136/32.
    • Destination Address/Mask - the destination address is the specific target service, in this case Google DNS at 8.8.8.8/32.
    • Port - this will be port 53 for DNS.
    • VLANs - this will be the security service’s outbound-side VLAN, so in this case the Proxy_out VLAN.
    • Protocol Settings (L7 Profile Type) - select None.
    • Protocol Settings (L7 Profile) - select None.
    • Click Save & Next
  • Summary - the summary page presents an expandable list of all of the workflow-configured objects. To expand the details for any given setting, click the corresponding arrow icon on the far right. To edit any given setting, click the corresponding pencil icon. Clicking the pencil icon will send the workflow back to the selected settings page.

    • When satisfied with the defined settings, click Deploy.
  • Test - to verify the service channel is working, SSH to the proxy service and attempt to perform a DNS query to 8.8.8.8.

    dig @8.8.8.8 www.example.com
    

    Assuming this works, the proxy service can be configured to use this DNS service. Additional service channels can be created to provide direct access to other applications.

    Note

    A service channel works by creating a more specific listener on the destination side of the security service, based on some combination of source, destination, destination port and protocol (TCP/UDP). This can have adverse and unintentional effects if a service channel is defined too loosely. For example, if a service channel is simply defined with a destination IP (ex. 93.184.216.34), port (443), and protocol (TCP), outbound user traffic legitimately trying to get to https://www.example.com will be incorrectly subverted through the service channel.