LocalLB::VirtualServer::set_nat64_state

Introduced : BIG-IP_v11.0.0
Sets the NAT64 translation states for the specified virtual servers. When this setting is enabled, the system translates IPv6 to IPv4 by chopping off the first 96 bits of the incoming destination address. The remaining 32 bits are kept as an IPv4 address and used as the translation destination.

Prototype

 set_nat64_state(
    in String [] virtual_servers,
    in EnabledState [] states
);

Parameters

Parameter Type Description
virtual_servers String [] The virtual server definitions to set the NAT64 translation states for.
states EnabledState [] The NAT64 translation states to apply.

Return Type

Type Description
void  

Exceptions

Exception Description
Common::AccessDenied Raised if the client credentials are not valid.
Common::InvalidArgument Raised if one of the arguments is invalid.
Common::OperationFailed Raised if an operation error occurs.

See Also

iControl ::
iControl :: LocalLB :: VirtualServer

Warning

The links to the sample code below are remnants of the old DevCentral wiki and will result in a 404 error. For best results, please copy the link text and search the codeshare directly on DevCentral.

Sample Code


Copyright © 1996-2012, F5 Networks, Inc. All rights reserved.

The BIG-IP API Reference documentation contains community-contributed content. F5 does not monitor or control community code contributions. We make no guarantees or warranties regarding the available code, and it may contain errors, defects, bugs, inaccuracies, or security vulnerabilities. Your access to and use of any code available in the BIG-IP API reference guides is solely at your own risk.