Networking::STPInstanceV2::set_bridge_priority¶
Introduced : BIG-IP_v11.0.0
Sets the bridge priorities of the specified spanning tree instances.
Each bridge in a spanning tree instance has a priority value, which
controls the topology of the spanning tree chosen by the protocol. The
bridge with the lowest priority value will become the root of the
spanning tree. Priority values range from 0-61440 in steps of 4096.
Hence, the supported priorities are: 0 16384 32768 49152 4096 20480
36864 53248 8192 24576 40960 57344 12288 28672 45056 61440 The default
bridge priority is 61440, which will prevent BIGIP from being chosen
as the root bridge. If the specified bridge priority is not one of the
allowed values listed above, it is rounded down to the next lower
value in the list. In STP or RSTP mode, only STP intance 0 is valid.
Parameters¶
Parameter | Type | Description |
stp_instances | String [] | The spanning tree instance names |
priorities | long [] | The bridge priorities of the specified spanning tree instances. |
Exceptions¶
Exception | Description |
Common::AccessDenied | Raised if the client credentials are not valid. |
Common::InvalidArgument | Raised if one of the arguments is invalid. |
Common::OperationFailed | Raised if an operation error occurs. |
See Also¶
iControl ::
Warning
The links to the sample code below are remnants of the old DevCentral wiki and will result in a 404 error. For best results, please copy the link text and search the codeshare directly on DevCentral.
Sample Code¶
The BIG-IP API Reference documentation contains community-contributed content. F5 does not monitor or control community code contributions. We make no guarantees or warranties regarding the available code, and it may contain errors, defects, bugs, inaccuracies, or security vulnerabilities. Your access to and use of any code available in the BIG-IP API reference guides is solely at your own risk.