Networking::Trunk::get_active_lacp_state

Introduced : BIG-IP_v9.0
Gets the states indicating whether LACP is operating in active or passive mode. When operating in passive mode, LACP will not send LACP frames out LACP-enabled interfaces or LACP-enabled trunks unless an LACP frame is first received on that interface or trunk. When operating in active mode, LACP immediately begins sending LACP frames from LACP-enabled interfaces and trunks.

Prototype

EnabledState [] get_active_lacp_state(
    in String [] trunks
);

Parameters

Parameter Type Description
trunks String [] The trunk names.

Return Type

Type Description
EnabledState [] Returns the states indicating whether active LACP is enabled/disabled for the specified trunks.

Exceptions

Exception Description
Common::AccessDenied Raised if the client credentials are not valid.
Common::InvalidArgument Raised if one of the arguments is invalid.
Common::OperationFailed Raised if an operation error occurs.

See Also

iControl ::
iControl :: Networking :: Trunk

Warning

The links to the sample code below are remnants of the old DevCentral wiki and will result in a 404 error. For best results, please copy the link text and search the codeshare directly on DevCentral.

Sample Code


Copyright © 1996-2012, F5 Networks, Inc. All rights reserved.

The BIG-IP API Reference documentation contains community-contributed content. F5 does not monitor or control community code contributions. We make no guarantees or warranties regarding the available code, and it may contain errors, defects, bugs, inaccuracies, or security vulnerabilities. Your access to and use of any code available in the BIG-IP API reference guides is solely at your own risk.