Networking::Trunk::set_stp_protocol_detection_reset_state

Introduced : BIG-IP_v9.0
Sets the states indicating whether RSTP or MSTP BPDUs (depending on the current STP mode) to be sent on the specified trunks, until such time as a legacy STP bridge is detected again on those trunks. Note: This method is only applicable when the current STP mode is RSTP or MSTP.

Prototype

 set_stp_protocol_detection_reset_state(
    in String [] trunks,
    in EnabledState [] states
);

Parameters

Parameter Type Description
trunks String [] The trunk names.
states EnabledState [] The STP protocol detection reset states to set for the specified interface names.

Return Type

Type Description
void  

Exceptions

Exception Description
Common::AccessDenied Raised if the client credentials are not valid.
Common::InvalidArgument Raised if one of the arguments is invalid.
Common::OperationFailed Raised if an operation error occurs.

See Also

iControl ::
iControl :: Networking :: Trunk

Warning

The links to the sample code below are remnants of the old DevCentral wiki and will result in a 404 error. For best results, please copy the link text and search the codeshare directly on DevCentral.

Sample Code


Copyright © 1996-2012, F5 Networks, Inc. All rights reserved.

The BIG-IP API Reference documentation contains community-contributed content. F5 does not monitor or control community code contributions. We make no guarantees or warranties regarding the available code, and it may contain errors, defects, bugs, inaccuracies, or security vulnerabilities. Your access to and use of any code available in the BIG-IP API reference guides is solely at your own risk.