F5 Lifecycle Operator parameters¶
The F5 Lifecycle Operator (FLO) is seamlessly installed by using Helm with the values override file flo-value.yaml file.
The table below describes the global parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the actual secret to download artifacts from the registry. |
- |
|
Specifies the clusterIssuer. |
- |
The table below describes the CR Platform and RBAC parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Set to |
true |
|
Specifies the container platform on which FLO is deployed. Use |
Generic |
|
Defines the IP address family used for Kubernetes Services. Supported values are |
ipv4 |
|
Specifies the namespace used for shared components across F5 operators. If left empty ( |
“” |
The table below describes the CR namespace parameter.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the namespace in which the F5 Lifecycle Operator will be installed. |
- |
The table below describes the CR logLevel parameter.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specified the log level for the F5 Lifecycle Operator. Available values: trace, debug, info, notice, warning, error, critical, alert, emergency |
info |
The table below describes the CR registry parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the uri from which to pull the container registry for the F5 Lifecycle Operator. |
- |
|
Specifies the registry name for the F5 Lifecycle Operator. |
- |
|
Specifies the registry pull policy. Available values: Always, IfNotPresent, Never |
IfNotPresent |
The table below describes the CR fluentbit_sidecar parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Enable or disable fluentbit sidecar container. |
true |
|
Specifies the name of the fluentbit sidecar container. |
- |
The table below describes the CR fluentbit_sidecar.registry parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the registry uri for the fluentbit sidecar container. |
- |
|
Specifies the name of the fluentbit registry. |
- |
|
Specifies the registry tag, using a version format. |
- |
|
Specifies the registry pull policy. Available values: Always, IfNotPresent, Never |
IfNotPresent |
The table below describes the CR fluentbit_sidecar.fluentbit parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the interval in seconds to flush the output. |
1 |
|
Enables or disables debug mode. |
true |
|
Sets the logging level. Available values: error, warning, info, debug, trace. |
info |
|
Buffer size for reading pipes (in bytes). |
8096 |
|
Interval in seconds between reading the pipe. |
1 |
|
Additional interval in nanoseconds. |
0 |
|
Enables or disables TLS for secure communication. |
true |
|
Sets the verbosity level of TLS debug logs. Available values: 0 (No debug), 1 (Error), 2 (State change), 3 (Informational) and 4 (Verbose) |
1 |
|
Enables or disables certificate validation. |
Off |
|
Key used for authorization with remote Fluentd. |
- |
The table below describes the CR fluentbit_sidecar.fluentd parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the hostname or IP address of the fluentd server. |
- |
|
Specifies the port number for connecting to fluentd. |
54321 |
The table below describes the CR fluentbit_sidecar.resources parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the maximum amount of CPU that the container can use. |
500m |
|
Specifies the maximum amount of memory that the container can use. |
1Gi |
|
Specifies the maximum amount of CPU required for the container. |
300m |
|
Specifies the maximum amount of memory required for the container. |
512Mi |
(2.2.1 and later) The table below describes the sharedDssm parameter.
Parameter |
Description |
Default Values |
|---|---|---|
|
Set to |
false |
The table below describes the CR serviceAccount parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Determines whether a new service account should be created for the F5 Lifecycle Operator pod. |
true |
|
Specifies the name of the service account to use. |
- |
The table below describes the CR resources parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the maximum amount of CPU that the container can use. |
0.5 |
|
Specifies the maximum amount of memory that the container can use. |
512Mi |
|
Specifies the maximum amount of CPU required for the container. |
0.25 |
|
Specifies the maximum amount of memory required for the container. |
256Mi |
The table below describes the CR f5-ipam-operator parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the uri from which to pull the container registry for the f5-ipam-operator. |
- |
|
Specifies the registry name for the f5-ipam-operator. |
- |
|
Specifies the registry pull policy. Available values: Always, IfNotPresent, Never |
IfNotPresent |
|
Specifies the namespace in which the f5-ipam-operator will be installed. Note: This should match to the namespace used to install the FLO helm chart. |
- |
|
Allows you to install the IPAM operator without the “flo” prefix. |
- |
The table below describes the CR license parameters.
Parameter |
Description |
Default Values |
|---|---|---|
|
Specifies the operational mode of the BIG-IP Next for Kubernetes clusters are licensed in connected mode. |
connected |
|
Specifies with FLP RootCA. |
- |
|
Specifies the JSON Web token (JWT). |
- |