apm resource leasepool
apm resource leasepool(1) BIG-IP TMSH Manual apm resource leasepool(1)
NAME
leasepool - Configures a lease pool.
MODULE
apm resource
SYNTAX
Configure the leasepool component within the resource module using the syntax shown in the following sections.
CREATE/MODIFY
create leasepool [name]
modify leasepool [name]
options
app-service [[string] | none]
description [[string] | none]
location-specific [true | false]
members [add | delete | modify | replace-all-with] {
[[first ip address in range] - [last ip address in range]]
}
DISPLAY
list leasepool
list leasepool [ [ [name] | [glob] | [regex] ] ... ]
show running-config leasepool
show running-config leasepool [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
show leasepool
show leasepool [name]
DELETE
delete leasepool [name]
DESCRIPTION
Configures a lease pool to create a collection of IPv4 addresses grouped as a single object. You can use a lease pool to
associate that collection of IPv4 addresses with a network access resource.
EXAMPLES
create leasepool myleasepool {10.10.10.1-10.10.10.10}
Creates a leasepool named myleasepool that contains the IPv4 addresses in the range 10.10.10.1 - 10.10.10.10.
Note: No spaces are allowed between the first IPv4 address, hyphen, and second IPv4 address.
OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none. Note: If the
strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
object. Only the application service can modify or delete the object.
description
Specifies a unique description of the lease pool.
location-specific
Specifies whether or not this object contains one or more attributes with values that are specific to the location
where the BIG-IP device resides. The location-specific attribute is either true or false. When using policy sync, mark
an object as location-specific to prevent errors that can occur when policies reference objects, such as
authentication servers, that are specific to a certain location.
[name]
Specifies a unique name for the lease pool.
members
Specifies a range of IP addresses separated by a hyphen.
partition
Displays the partition within which the component resides. The default is Common.
SEE ALSO
apm profile, ltm virtual
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2012. All rights reserved.
BIG-IP 2012-10-24 apm resource leasepool(1)