gtm monitor bigip-link

gtm monitor bigip-link(1)				BIG-IP TMSH Manual				 gtm monitor bigip-link(1)

NAME
       bigip-link - Configures a BIG-IP(r) Link monitor.

MODULE
       gtm monitor

SYNTAX
       Configure the bigip-link component within the gtm monitor module using the syntax in the following sections.

   CREATE/MODIFY
	create bigip-link [name]
	modify bigip-link [name]
	  options:
	    app-service [[string] | none]
	    defaults-from [name]
	    description [string]
	    destination [ip address]
	    ignore-down-response [enabled | disabled]
	    interval [integer]
	    timeout [integer]

	edit bigip-link [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

   DISPLAY
	list bigip-link
	list bigip-link [ [ [name] | [glob] | [regex] ] ... ]
	show running-config bigip-link
	show running-config bigip-link [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

   DELETE
	delete bigip-link [name]

       Note: You cannot delete default monitors.

DESCRIPTION
       You can use the bigip-link component to configure a custom monitor, or you can use the default BIG-IP Link monitor that the
       Global Traffic Manager provides. This type of monitor acquires data captured through monitors managed by a BIG-IP Link
       Controller.

EXAMPLES
       create bigip-link my_bigip-link defaults-from bigip_link

       Creates a monitor named my_bigip-link that inherits properties from the default BIG-IP Link monitor.

       list bigip-link

       Displays the properties of all of the BIG-IP Link monitors.

OPTIONS
       app-service
	    Specifies the name of the application service to which the monitor belongs. The default value is none. Note: If the
	    strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
	    monitor. Only the application service can modify or delete the monitor.

       defaults-from
	    Specifies the name of the monitor from which you want your custom monitor to inherit settings. The default value is
	    bigip_link.

       description
	    User defined description.

       destination
	    Specifies the IP address of the resource that is the destination of this monitor. The default value is *.

	    Possible values are:

	    *	 Specifies to perform a health check on the IP address of the node.

	    IP address
		 Specifies to perform a health check on the IP address that you specify, route the check through the IP address of
		 the associated node, and mark the IP address of the associated node up or down accordingly.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.

       ignore-down-response
	    Specifies whether the monitor ignores a down response from the system it is monitoring. The default value is disabled.

       interval
	    Specifies the frequency at which the system issues the monitor check. The default value is 10 seconds.

       name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.

       partition
	    Displays the administrative partition within which the component resides.

       regex
	    Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
	    expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
	    expression syntax.

       timeout
	    Specifies the number of seconds the target has in which to respond to the monitor request. The default value is 30
	    seconds.

	    If the target responds within the set time period, it is considered up. If the target does not respond within the set
	    time period, it is considered down. Also, if the target responds with a RESET packet, the system immediately flags the
	    target as down without waiting for the timeout interval to expire.

SEE ALSO
       create, delete, edit, glob, gtm link, list, ltm node, modify, regex, show, tmsh,

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012. All rights reserved.

BIG-IP							    2012-10-19					 gtm monitor bigip-link(1)