gtm monitor radius-accountingΒΆ

gtm monitor radius-accounting(1)			BIG-IP TMSH Manual			  gtm monitor radius-accounting(1)

       radius-accounting - Configures a RADIUS accounting monitor for the BIG-IP(r) Global Traffic Manager.

       gtm monitor

       Configure the radius-accounting component within the gtm monitor module using the syntax shown in the following sections.

	create radius-accounting [name]
	modify radius [name]
	    app-service [[string] | none]
	    check-until-up [disabled | enabled]
	    debug [no | yes]
	    defaults-from [ [name] | none]
	    description [string]
	    destination [ip address]
	    interval [integer]
	    manual-resume [disabled | enabled]
	    nas-ip-address [ip address]
	    secret [string]
	    time-until-up [integer]
	    timeout [integer]
	    username [none | [string] ]

	edit radius-accounting [ [ [name] | [glob] | [regex] ] ...]

	list radius-accounting
	list radius-accounting [ [ [name] | [glob] | [regex] ] ...]
	show running-config radius
	show running-config radius [ [ [name] | [glob] | [regex] ] ...]

	delete radius-accounting [name]

       Note: You cannot delete default monitors.

       You can use the radius-accounting component to configure a custom monitor, or you can use the default RADIUS accounting
       monitor that the Global Traffic Manager provides. This type of monitor provides information about the usage of the RADIUS
       service for accounting purposes.

       create radius-accounting my_radius_acct defaults-from radius_accounting

       Creates a monitor named my_radius_acct that inherits properties from the default RADIUS accounting monitor.

       list radius-accounting

       Displays the properties of all of the RADIUS accounting monitors.

	    Specifies the name of the application service to which this monitor belongs. The default value is none. Note: If the
	    strict-updates option is enabled on the application service that owns the object, you cannot modify or delete this
	    monitor. Only the application service can modify or delete this monitor.

	    When enabled, specifies that when an active and passive (inband) monitor are combined in an AND type of rule, the
	    active monitor performs health checks only when the pool member is down, or until the pool member is marked as up.
	    When the passive monitor marks the pool member down, the active monitor resumes health checks.

	    The default value is disabled.

	    Specifies whether the monitor sends error messages and additional information to a log file created and labeled
	    specifically for this monitor. You can use the log information to help diagnose and troubleshoot unsuccessful health
	    checks. The default value is no.

	    The options are:

	    no	 Specifies that the system does not redirect error messages and additional information related to this monitor.

	    yes  Specifies that the system redirects error messages and additional information to the
		 /var/log/monitors/--.log file.

	    Specifies the name of the monitor from which you want your custom monitor to inherit settings. The default value is

	    User defined description.

	    Specifies the IP address and service port of the resource that is the destination of this monitor. The default value
	    is *:*.

	    Possible values are:

	    *:*  Specifies to perform a health check on the IP address and port supplied by a pool member.

		 Specifies to perform a health check on the server with the IP address supplied by the pool member and the port
		 you specify.

	    IP address:port
		 Specifies to mark a pool member up or down based on the response of the server at the IP address and port you

       glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.

	    Specifies the frequency at which the system issues the monitor check. The default value is 10 seconds.

	    Specifies whether the system automatically changes the status of a resource to up at the next successful monitor
	    check. The default value of the manual-resume option is disabled.

	    Note that if you set the manual-resume option to enabled, you must manually mark the resource as up before the system
	    can use it for load balancing connections.

       name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.

	    Specifies the network access server IP address that the system uses to identify itself to the RADIUS server. Using
	    this option, multiple BIG-IP(r) systems can appear as a single network access device to the RADIUS server. The default
	    value is none.

	    Displays the administrative partition within which the component resides.

	    Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
	    expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
	    expression syntax.

	    Specifies the secret the monitor needs to communicate with the resource. The default value is none.

	    Specifies the amount of time in seconds after the first successful response before a node is marked up. A value of 0
	    (zero) causes a node to be marked up immediately after a valid response is received from the node. The default value
	    is 0 (zero).

	    Specifies the number of seconds the target has in which to respond to the monitor request. The default value is 31

	    If the target responds within the set time period, it is considered up. If the target does not respond within the set
	    time period, it is considered down. Also, if the target responds with a RESET packet, the system immediately flags the
	    target as down without waiting for the timeout interval to expire.

	    Specifies the username, if the monitored target requires authentication. The default value is none.

       create, delete, edit, glob, gtm pool, list, modify, regex, show, tmsh

       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2009-2010, 2012-2014. All rights reserved.

BIG-IP							    2016-06-29				  gtm monitor radius-accounting(1)