gtm monitor tcp
gtm monitor tcp(1) BIG-IP TMSH Manual gtm monitor tcp(1)
NAME
tcp - Configures a Transmission Control Protocol (TCP) monitor.
MODULE
gtm monitor
SYNTAX
Configure the tcp component within the gtm monitor module using the syntax in the following sections.
CREATE/MODIFY
create tcp [name]
modify tcp [name]
options:
defaults-from [name]
description [string]
destination [ [ ipv4 address[:port] ] | [ ipv6 address[.port] ] ]
ignore-down-response [enabled | disabled]
interval [integer]
probe-timeout [integer]
recv [none | [string] ]
reverse [enabled | disabled]
send [none | [string] ]
timeout [integer]
transparent [disabled | enabled]
edit tcp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list tcp
list tcp [ [ [name] | [glob] | [regex] ] ... ]
show running-config tcp
show running-config tcp [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete tcp [name]
Note: You cannot delete default monitors.
DESCRIPTION
You can use the tcp component to configure a custom monitor, or you can use the default TCP monitor that the Global Traffic
Manager provides.
EXAMPLES
create tcp my_tcp defaults-from tcp
Creates a monitor named my_tcp that inherits properties from the default TCP monitor.
list tcp
Displays the properties of all of the TCP monitors.
OPTIONS
defaults-from
Specifies the name of the monitor from which you want your custom monitor to inherit settings. The default value is
tcp.
description
User defined description.
destination
Specifies the IP address and service port of the resource that is the destination of this monitor. The default value
is *:*.
Possible values are:
*:* Specifies to perform a health check on the IP address and port supplied by a pool member.
*:port
Specifies to perform a health check on the server with the IP address supplied by the pool member and the port
you specify.
IP address:port
Specifies to mark a pool member up or down based on the response of the server at the IP address and port you
specify.
IP address:port (with the transparent option enabled)
Specifies to perform a health check on the server at the IP address and port you specify, route the check through
the IP address and port supplied by the pool member, and mark the pool member (the gateway) up or down
accordingly.
glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.
ignore-down-response
Specifies whether the monitor ignores a down response from the system it is monitoring. The default value is disabled.
interval
Specifies the frequency at which the system issues the monitor check. The default value is 30 seconds.
name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.
partition
Displays the administrative partition within which the component resides.
probe-timeout
Specifies the number of seconds after which the BIG-IP(r) system times out the probe request to the BIG-IP system. The
default value is 5 seconds.
recv Specifies the text string that the monitor looks for in the returned resource. The default value is none.
The most common receive expressions contain a text string that is included in an HTML file on your site. The text
string can be regular text, HTML tags, or image names. If you do not specify a value for both the send and recv
options, the monitor performs a simple service check and connect only.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
expression syntax.
reverse
Specifies whether the monitor operates in reverse mode. When the monitor is in reverse mode, a successful check marks
the monitored object down instead of up. You can use the this mode only if you configure both the send and recv
options.
The default value is disabled, which specifies that the monitor does not operate in reverse mode. The enabled value
specifies that the monitor operates in reverse mode.
send Specifies the text string that the monitor sends to the target object. The default setting is GET /, which retrieves a
default HTML file for a web site.
To retrieve a specific page from a web site, specify a fully-qualified path name, for example, GET
/www/company/index.html. Since the string may have special characters, the system may require that the string be
enclosed with single quotation marks.
If this value is null, then a valid connection suffices to determine that the service is up. In this case, the system
does not need the recv option and ignores the option even if not null.
timeout
Specifies the number of seconds the target has in which to respond to the monitor request. The default value is 120
seconds.
If the target responds within the set time period, it is considered up. If the target does not respond within the set
time period, it is considered down. Also, if the target responds with a RESET packet, the system immediately flags the
target as down without waiting for the timeout interval to expire.
transparent
Specifies whether the monitor operates in transparent mode. Monitors in transparent mode can monitor pool members
through firewalls. The default value is disabled.
SEE ALSO
create, delete, edit, glob, gtm pool, gtm server, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012-2013. All rights reserved.
BIG-IP 2017-08-15 gtm monitor tcp(1)