ltm message-routing diameter transport-config
ltm message-routing diameter transport-config(1) BIG-IP TMSH Manual ltm message-routing diameter transport-config(1)
NAME
transport-config - Configures a Diameter transport-config instance for routing Diameter message protocol messages.
MODULE
ltm message-routing diameter
SYNTAX
Configure the transport-config component within the ltm message-routing diameter module using the syntax shown in the
following sections.
CREATE/MODIFY
create transport-config [name]
modify transport-config [name]
options:
app-service [[string] | none]
description [string]
profiles [add | delete | replace-all-with] {
[profile_name ...] {
context [all | clientside | serverside] read-only attribute for v12.0.0 or greater.
}
}
rules { [none | [rule_name ... ] }
source-address-translation {
options:
pool [ [pool_name] | none]
type [ automap | snat | none ]
}
source-port [integer]
source-port-mode [change | preserve | preserve-strict]
edit transport-config [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list transport-config
list transport-config [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete transport-config [name]
DESCRIPTION
You can use the transport-config component to define the profiles, rules, and source-address-translation of an outgoing
connection.
EXAMPLES
create transport-config my_transport-config
Creates a transport-config instance named my_transport-config using the system defaults.
create transport-config my_transport-config { profiles add { my_diameter my_tcp } }
Creates a transport-config instance named my_transport-config that will use two profiles, my_diameter and my_tcp, to create
and configure an outgoing connection. The outgoing connection is automatically configured with the router instance that
created the connection.
OPTIONS
app-service
Specifies the name of the application service to which the object belongs. The default value is none. Note: If the
strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
object. Only the application service can modify or delete the object.
description
User defined description.
profiles
Specifies a list of profiles that the outgoing connection uses to use to direct and manage traffic. The default value
is none.
rules
Specifies a list of iRules, separated by spaces, that customize the transport configuration to direct and manage
traffic. The default value is none.
source-address-translation
Specifies the type of source address translation enabled for the transport configuration, as well as the pool that the
source address translation uses.
pool Specifies the name of a SNAT pool used by the specified transport configuration.
type Specifies the type of source address translation associated with the specified transport configuration.
The options are:
automap
Specifies the use of self IP addresses for transport configuration server source address translation.
none Specifies no source address translation is used by the transport configuration.
snat Specifies the use of a SNAT pool of translation addresses for virtual server source address translation.
source-port
Specifies the source port to be used for the connection being created. If source-port-mode is change, this setting has
no effect. The default value is 0.
source-port-mode
Specifies how the system should select a source port for the outgoing connection. The default value is change.
The options are:
change
Selects an ephemeral source port for the outgoing connection.
preserve
Attempts to use the value of source-port for the outgoing connection, if specified. Otherwise attempts to
preserve the source port of the incoming connection.
preserve-strict
Forces the outgoing connection to use the value of source-port, if specified. Otherwise forces the new connection
to preserve the source port of the incoming connection. The system will fail to create a new outgoing connection
if the specified source port is already in use.
SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, regex, tmsh, ltm message-routing diameter route
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2013-2016. All rights reserved.
BIG-IP 2019-10-07 ltm message-routing diameter transport-config(1)