ltm monitor inbandΒΆ

ltm monitor inband(1)					BIG-IP TMSH Manual				     ltm monitor inband(1)

NAME
       inband - Configures an Inband (passive) monitor.

MODULE
       ltm monitor

SYNTAX
       Configure the inband component within the ltm monitor module using the syntax in the following sections.

   CREATE/MODIFY
	create inband [name]
	modify inband [name]
	  options:
	    app-service [[string] | none]
	    defaults-from [name]
	    description [string]
	    failure-interval [integer]
	    failures [integer]
	    response-time [integer]
	    retry-time [integer]

	edit inband [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

   DISPLAY
	list inband
	list inband [ [ [name] | [glob] | [regex] ] ... ]
	show inband [ [ [name] | [glob] | [regex] ] ... ]
	show running-config inband
	show running-config inband [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

   DELETE
	delete inband [name]

       Note: You cannot delete default monitors.

DESCRIPTION
       You can use the inband component to configure a custom monitor, or you can use the default Inband monitor that the Local
       Traffic Manager provides. With this type of monitor the BIG-IP(r) system can perform passive monitoring as part of client
       requests.

EXAMPLES
       create inband my_inband defaults-from inband

       Creates a monitor named my_inband that inherits properties from the default Inband monitor.

       list inband

       Displays the properties of all of the Inband monitors.

OPTIONS
       app-service
	    Specifies the name of the application service to which the monitor belongs. The default value is none. Note: If the
	    strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
	    monitor. Only the application service can modify or delete the monitor.

       defaults-from
	    Specifies the name of the monitor from which you want your custom monitor to inherit settings. The default value is
	    inband.

       description
	    User defined description.

       failure-interval
	    Specifies an interval, in seconds. If the number of failures specified in the failures option occurs within this
	    interval, the system marks the pool member as being unavailable. The default value is 30.

       failures
	    Specifies the number of failures that the system allows to occur, within the time period specified in the failure-
	    interval option, before marking a pool member unavailable. The default value is 3, which means that the system marks
	    the pool member unavailable at the fourth failure. The multiple tmm processes use a per-process number to calculate
	    failures, depending on the specified load.	For example, for the Round Robin load balancing method, if there are N tmm
	    processes and M pool members, and the Failures setting is set to L, then up to N*M*L+1 failures can occur before the
	    system marks the node as down.

	    Specifying a value of 0 (zero) disables this option.

	    A failure can be either a failure to connect or a failure of the pool member to respond within the time specified in
	    the response-time option.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.

       name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.

       partition
	    Displays the administrative partition within which the component resides.

       regex
	    Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
	    expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
	    expression syntax.

       response-time
	    Specifies an amount of time, in seconds. If the pool member does not respond with data after the specified amount of
	    time has passed, the number of failures in this interval increments by 1. Specifying a value of 0 (zero) disables this
	    option.

       retry-time
	    Specifies the amount of time in seconds after the pool member has been marked unavailable before the system retries to
	    connect to the pool member. Specifying a value of 0 (zero) disables this option.

SEE ALSO
       create, delete, edit, glob, list, modify, regex, show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012-2013, 2015. All rights reserved.

BIG-IP							    2017-04-05					     ltm monitor inband(1)