ltm profile georedundancy
ltm profile georedundancy(1) BIG-IP TMSH Manual ltm profile georedundancy(1)
NAME
georedundancy - Configures a Geo-Redundancy profile.
MODULE
ltm profile
SYNTAX
Configure the georedundancy component within the ltm profile module using the syntax shown in the following sections.
CREATE/MODIFY
create georedundancy [name]
modify georedundancy [name]
options:
defaults-from [ [name] | none]
description [string]
group-id [string]
local-site-id [string]
prefix [[string] | none]
metadata-refresh-interval-ms [integer]
message-send-max-retries [integer]
message-timeout-ms [integer]
read-broker-list [string]
remote-site-id [string]
transport-name [string]
write-broker-list [string]
edit georedundancy [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
mv georedundancy [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
options:
to-folder
reset-stats georedundancy
reset-stats georedundancy [ [ [name] | [glob] | [regex] ] ... ]
DISPLAY
list georedundancy
list georedundancy [ [ [name] | [glob] | [regex] ] ... ]
show running-config georedundancy
show running-config georedundancy [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
show georedundancy
show georedundancy [ [ [name] | [glob] | [regex] ] ... ]
options:
(default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
field-fmt
DELETE
delete georedundancy [name]
DESCRIPTION
You can use the georedundancy component to manage a Geo-Redundancy profile.
EXAMPLES
create georedundancy my_georedundancy_profile defaults-from georedundancy
Creates a Geo-Redundancy profile named my_georedundancy_profile using the system defaults.
create georedundancy my_georedundancy_profile { local-site-id local_site }
Creates a Geo-Redundancy profile named my_georedundancy_profile with a name of the local site identification set to
local_site.
mv georedundancy /Common/my_georedundancy_profile to-folder /Common/my_folder
Moves a custom georedundancy profile named my_georedundancy_profile to a folder named my_folder, where my_folder has
already been created and exists within /Common.
OPTIONS
local-site-id
Defines the name to identify local site . The default value is local_site.
remote-site-ids
Defines the list of comma separated names corresponding to remote sites. The default value is remote_site.
read-broker-list
Specifies the list of local site broker's IP addresses and ports for the local TMMs to read the data from. Example:
127.20.1.254:9092, 127.20.2.254:9092.
write-broker-list
Specifies the list of local site broker's IP addresses and ports for the local TMMs to write the data to. Example:
127.20.1.254:9092, 127.20.2.254:9092.
transport-name
Defines the transport profile that Geo-Redundancy half proxy uses to establish connection to brokers. The default
vaulue is tcp.
metadata-refresh-interval-ms
Indicates the Topic metadata refresh interval in milliseconds. The metadata is automatically refreshed on error and
connect. Use -1 to disable the intervalled refresh. The default value is 300K.
group-id
Defines the client group identifier string. All clients sharing the same group-id belong to the same group.
message-send-max-retries
Specifies the maximum number of attempts that will be made to reload the Diameter session DB from the remote site
during startup.
message-timeout-ms
Specifies how often the system will attempt to reload the Diameter session DB from the remote site during startup.
prefix
Indicates a list of session-db key prefixes and for each prefix a session-db global callback gets registered. A prefix
when applied to any logical table within the iRule session-db storage would enable replication of the same. These
prefix values will only be applied to iRule session bins. The default value is "".
SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, mv, regex, reset-stats, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012-2014, 2016-2017. All rights reserved.
BIG-IP 2019-08-30 ltm profile georedundancy(1)