ltm profile response-adapt

ltm profile response-adapt(1)				BIG-IP TMSH Manual			     ltm profile response-adapt(1)

NAME
       response-adapt - Configures a HTTP response adaptation profile.

MODULE
       ltm profile

SYNTAX
       Configure the response-adapt component within the ltm profile module using the syntax shown in the following sections.

   CREATE/MODIFY
	create response-adapt [name]
	modify response-adapt [name]
	  options:
	    defaults-from [ [name] | none]
	    enabled [ yes | no ]
	    internal-virtual [ [name] | none]
	    preview-size [integer]
	    service-down-action [ ignore | reset | drop ]
	    timeout [integer]
	    allow-http-10 [ yes | no ]

	edit response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

	mv response-adapt [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
	  options:
	    to-folder

	reset-stats response-adapt
	reset-stats response-adapt [ [ [name] | [glob] | [regex] ] ... ]

   DISPLAY
	list response-adapt
	list response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	show running-config response-adapt
	show running-config response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

	show response-adapt
	show response-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    field-fmt

   DELETE
	delete response-adapt [name]

DESCRIPTION
       You can use the response-adapt component to manage a HTTP response adaptation profile.

EXAMPLES
       create response-adapt my_req_adapt defaults-from response-adapt

       Creates a HTTP response adaptation profile named my_req_adapt using the system defaults.

       create response-adapt my_req_adapt { enabled yes }

       Creates a HTTP response adaptation profile named my_req_adapt that is enabled for adapting HTTP responses.

       mv response-adapt /Common/my_responseadapt_profile to-folder /Common/my_folder

       Moves a custom responseadapt profile named my_responseadapt_profile to a folder named my_folder, where my_folder has
       already been created and exists within /Common.

       defaults-from
	    Specifies the profile that you want to use as the parent profile. Your new profile inherits all of the settings and
	    values from the specified parent profile. The default value is responseadapt.

       enabled
	    Enables adaptation of HTTP responses. If set to yes, HTTP responses will be forwarded to the specified internal
	    virtual server for adaptation. The default value is yes.

       internal-virtual
	    Specifies the name of the internal virtual server to use for adapting the HTTP response.

       preview-size
	    Specifies the maximum size of the preview buffer. The preview buffer is used to hold a copy of the HTTP response
	    header and data sent to the internal virtual server in case the adaptation server reports that it does not need to
	    adapt the HTTP response. Setting the preview-size to 0, disables buffering the response and should only be done if the
	    adaptation server will always return with a modified HTTP response or the original HTTP response. The default value is
	    1024.

       service-down-action
	    Specifies the action to take if the internal virtual server does not exist or returns an error. The default value is
	    ignore.

	    The options are:

	    ignore
		 Ignore the error and send the unmodified HTTP response to a HTTP server selected from this virtual server's pool.

	    drop Drop the connection.

	    reset
		 Reset the connection.

       timeout
	    Specifies a timeout in milliseconds. If the internal virtual server does not return a result within the specified
	    time, a timeout error will occur. If preview-size is 0, the countdown will start after the entire content has been
	    sent for adaptation. A 0 value disables the timeout. The default value is 0.

       to-folder
	    response-adapt profiles can be moved to any folder under /Common, but configuration dependencies may restrict moving
	    the profile out of /Common.

       allow-http-10
	    Specifies whether to forward HTTP version 1.0 responses for adaptation. By default only HTTP version 1.1 responses are
	    forwarded. Version 1.0 is not supported. While it should work in most cases, it might be necessary to restrict
	    adaptation on a site-specific basis. The default value is no.

SEE ALSO
       create, delete, edit, glob, list, ltm virtual, modify, mv, regex, reset-stats, show, tmsh, ltm profile request-adapt

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2012-2013, 2015. All rights reserved.

BIG-IP							    2017-05-24				     ltm profile response-adapt(1)