ltm rule command DIAMETER persist

iRule(1)						BIG-IP TMSH Manual						  iRule(1)

DIAMETER::persist
       Returns the persistence key being used for the current message.

SYNOPSIS
       DIAMETER::persist

   DESCRIPTION
       Gets the persistence key for the current message.

       DIAMETER::persist reset

   DESCRIPTION
       Clear any persistence record stored under the current message\'s persistence key.

       DIAMETER::persist use

   DESCRIPTION
       Use the current persistence record for routing the message if present. If not present, route the message using the route
       table. On completion of routing, add a new persistence record if one does not exist. If an existing persistence record
       exists, replace the message\'s selected route with the destination stored in the persistence entry.

       DIAMETER::persist replace

   DESCRIPTION
       Route the message using the route table. On completion of routing, add a new persistence record if one does not exist. If
       an existing persistence record exists, replace the persistence record with the route selected.

       DIAMETER::persist bypass

   DESCRIPTION
       Route the message using the route table. On completion of routing, add a new persistence record if one does not exist. If
       an existing persistence record exists, it will be left unchanged.

       DIAMETER::persist ignore

   DESCRIPTION
       Route the message using the route table. The results of the routing will not be stored in the persistence table.

       DIAMETER::persist delete-none

   DESCRIPTION
       Do not delete the persistence record automatically upon completion of the transaction. This is the default action.

       DIAMETER::persist delete-on-success

   DESCRIPTION
       The persistence record will be deleted upon successful completion of the transaction. The transaction complete delete
       action should be specified when processing an answer response message.

       DIAMETER::persist delete-on-failure

   DESCRIPTION
       The persistence record will be deleted upon unsuccessful completion of the transaction. The transaction complete delete
       action should be specified when processing an answer response message.

       DIAMETER::persist delete-on-any

   DESCRIPTION
       The persistence record will be deleted upon completion of the transaction. The transaction complete delete action should be
       specified when processing an answer response message.

       DIAMETER::persist timeout (VALUE)

   DESCRIPTION
       Sets or gets the persistence key timeout value. Modifying the persistence key timeout outside of DIMETER_INGRESS or
       MR_INGRESS event has no effect on the persistence key timeout.

       DIAMETER::persist bidirectional (BOOLEAN)?

   DESCRIPTION
       Sets of gets the persistence keys bidirectional persistence flag.

       DIAMETER::persist direction ('detect' | 'forward' | 'reverse')?

   DESCRIPTION
       Sets of gets the persistence direction. If set to detect, the persist logic will determine if the message should be routed
       to the destination of the persist record or the source of the persist record. If set to forward, the message will be routed
       to the destination of the persistence record. If set to reverse, the message will be routed to the source of the
       persistence record.

       DIAMETER::persist (NEW_PERSIST_KEY)?

   DESCRIPTION
       Sets the persistence key for the current message. Modifying the persistence key outside of DIAMETER_REQUEST or MR_INGRESS
       event has no effect of the persistence record used or modified when routing.

       DIAMETER::persist (NEW_PERSIST_KEY) (BI_DIRECTION)?

   DESCRIPTION
       Sets the persistence key for the current message. Modifying the persistence key outside of DIAMETER_INGRESS or MR_INGRESS
       event has no effect of the persistence record used or modified when routing.

DESCRIPTION
       This iRule command returns the persistence key being used for the current message. If new persist key is provided, the
       existing persistence key will be replaced. The value of the new key MUST be the value of a valid AVP in the message. An AVP
       attribute name should not be given as the new key value.

       If bidirection is specified as false, disable(d), no, 0, or is unspecified, then persistence is not bidirectional. If
       bidirection is specified as true, enable(d), yes, or 1 this persistence entry is bidirectional.

       If the "reset" sub-command is used, the persistence record associated with the current message will be removed.

       When using this iRule command to set a persistence record, the associated diameter session profile must be configured with
       the attribute persist-type set to custom or else the iRule will fail.

       Syntax DIAMETER::persist [new-persist-key] [bidirection] DIAMETER::persist reset

RETURN VALUE
VALID DURING
       DIAMETER_INGRESS, MR_INGRESS

EXAMPLES
	when DIAMETER_INGRESS {
	    log local0. "Received a DIAMETER message, persistence key is [DIAMETER::persist]"
	}

HINTS
SEE ALSO
CHANGE LOG
       @BIGIP-12.0.0 --First introduced the command.  @BIGIP-13.0.0 --Added subcommand: reset @BIGIP-14.1.0 --Added subcommand:
       use --Added subcommand: bypass --Added subcommand: replace --Added subcommand: ignore --Added subcommand: timeout --Added
       subcommand: bidirectional @BIGIP-16.0.0 --Added subcommand: direction --Added subcommand: delete-none --Added subcommand:
       delete-on-success --Added subcommand: delete-on-failure @BIGIP-17.0.0 --Added subcommand: delete-on-any

BIG-IP							    2022-04-12							  iRule(1)