net bwc traffic-group
net bwc traffic-group(1) BIG-IP TMSH Manual net bwc traffic-group(1)
NAME
traffic-group - Configures a bandwidth control policy for traffic flow.
MODULE
net bwc
SYNTAX
Configure the traffic-group component within the net bwc module using the syntax in the following sections.
CREATE/MODIFY
create traffic-group [name]
modify traffic-group [name]
options:
app-service [[string] | none]
description [string]
dynamic [ enabled ]
priority-classes [none] {
weight-percentage [integer]
}
edit traffic-group [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list traffic-group
list traffic-group [ [ [name] | [glob] | [regex] ] ... ]
show running-config net bwc traffic-group
show running-config net bwc traffic-group [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
DELETE
delete net bwc traffic-group [all | [name] ]
DESCRIPTION
You can use the net bwc traffic-group to create a bandwidth traffic group policy to handle traffic flow, and then associate
it with bwc component such as bwc policy/category.
EXAMPLES
create net bwc traffic-group
Creates a bwc policy (see below).
list net bwc traffic-group all-properties
Displays all of the properties of all of the bwc policies.
delete net bwc traffic-group
Deletes a bwc traffic group (see below).
Example for dynamic policy:
net bwc traffic-group tc-GOLD {
priority-classes {
tc-BLUE {
weight-percentage 30
}
tc-RED {
weight-percentage 20
}
}
}
app-service
Specifies the name of the application service to which the object belongs. The default value is none. Note: If the
strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
object. Only the application service can modify or delete the object.
name Specifies a unique name for the policy. This option is required for the commands create, delete, and modify.
description
User defined description.
weight-percentage
Specifies the maximum bandwidth that traffic is allowed during congestion using the traffic class associated. The
range is from 1Mbps to 320Gbps.
Valid units: bps(default), gbps, kbps, mbps.
dynamic
Specifies the type for traffic group to be dynamic type. This option is optional for the commands create, delete, and
modify. The default valid is disabled. When dynamic is disabled, the traffic group type is said to be static. The type
of traffic group should match with be bwc policy that would be mapped. Note: policy type change modification is a
disallowed configuration.
iRule
Please refer to iRule documentation for iRule to use bandwidth control policy.
SEE ALSO
create, delete, edit, glob, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2011-2015. All rights reserved.
BIG-IP 2015-07-22 net bwc traffic-group(1)