security datasync background-tasks
security datasync background-tasks(1) BIG-IP TMSH Manual security datasync background-tasks(1)
NAME
background-tasks - Configure the Schedule of the Datasync Background Tasks
MODULE
security datasync
SYNTAX
Manage the background-tasks component within the security datasync module using the syntax shown in the following sections.
MODIFY
modify background-tasks [task_name]
options:
daily-start-time [time]
edit background-tasks [task_name]
options:
all-properties
non-default-properties
DISPLAY
list background-tasks
list background-tasks [task_name]
show running-config background-tasks
show running-config background-tasks [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
show background-tasks
show background-tasks [ [ [name] | [glob] | [regex] ] ... ]
options:
field-fmt
DESCRIPTION
You can use the background-tasks component to modify or display the Schedule of the Datasync Background Tasks. This
controls the Daily Start Time of each task.
The objects cannot be created or deleted, but only modified and displayed. All of the times displayed and configured are
in local time. However, they are stored as UTC, so changing the timezone of the BIG-IP will change the display of the
configured time.
There is a limitation on the time which can be configured: the new configuration cannot be within 2 hours of the active
time. The configured daily-start-time must be before the value of daily-start-time-must-be-before, OR after the value of
daily-start-time-must-be-after, inclusive.
These objects are synchronized via the datasync-global-dg device-group.
Use the show command to display the current task schedule. This shows the start time of each task.
OPTIONS
daily-start-time
Specifies the time of day in which the generation will start.
daily-start-time-must-be-before
Displays the upper limitation: daily-start-time must be before this displayed time.
daily-start-time-must-be-after
Displays the lower limitation: daily-start-time must be after this displayed time.
error-msg
Displays the configuration error message which causes daily-start-time to be non-configurable, or "none" if there is
no error.
SEE ALSO
edit, list, modify, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2017. All rights reserved.
BIG-IP 2017-08-30 security datasync background-tasks(1)