sys crypto client
sys crypto client(1) BIG-IP TMSH Manual sys crypto client(1)
NAME
client - Manage remote crypto clients.
MODULE
sys crypto
SYNTAX
Manage crypto clients using the syntax in the following section.
CREATE/MODIFY
create client [name]
modify client [name]
options:
addr [ip address]
connection-reset
[disabled | enabled]
heartbeat [integer]
max-retries [integer | infinite]
port [integer]
profiles [add | delete | replace-all-with] { [profile_name ...] }
profiles [none]
req-timeout [integer]
retry-interval [integer]
DISPLAY
list client
list client [ [ [name] | [globl] | [regex] ] ... ]
show client
show client [ [ [name] | [globl] | [regex] ] ... ]
DELETE
delete client [name]
DESCRIPTION
You can use the client component to manage remote crypto clients.
EXAMPLES
create client example addr 10.1.1.1 port 12100 profiles add { serverssl tcp }
Creates a remote crypto client named "example" that will use a remote crypto server with the IP address "10.1.1.1" on port
"12100". The remote crypto client will use SSL over a TCP connection to communicate with the remote crypto server.
OPTIONS
addr Specifies the IP address of the remote crypto server.
connection-reset
Resets the connection to the remote crypto server.
(enabled | disabled)
Specifies the state of the remote crypto client. The default value is enabled.
heartbeat
Specifies the number of seconds to wait before sending a heartbeat request. A value of 0 disables the sending of
heartbeat requests. The default value is 30 seconds.
max-retries
Specifies the maximum number of times to retry connecting to the remote crypto server.
If the maximum retries value is infinite, the crypto client retries connecting until a connection is made.
The default value is infinite.
port Specifies the port used by the remote crypto server.
profiles
Specifies a list of profiles that the remote crypto client will use to communicate with remote the remote crypto
server.
req-timeout
Specifies the timeout in milliseconds for crypto requests to complete. The default value is 5000 milliseconds.
retry-interval
Specifies the interval in seconds between attempts to connect to the remote crypto server. The default value is 10
seconds.
SEE ALSO
create, delete, glob, list, modify, regex, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2014. All rights reserved.
BIG-IP 2015-01-16 sys crypto client(1)