sys ip-address
sys ip-address(1) BIG-IP TMSH Manual sys ip-address(1)
NAME
ip-address - Displays the IP addresses currently associated with a configuration object on a BIG-IP(r) system.
MODULE
sys
SYNTAX
Display the IP addresses associated with a BIG-IP system configuration object using the syntax in the following section.
DISPLAY
show ip-address
options:
[all-properties | field-fmt]
DESCRIPTION
You can use the ip-address component to display the location on the BIG-IP system of the IP addresses associated with a
configuration object. The system displays the following information:
Entry
Displays the IP address and any associated configuration. For example, for a Local Traffic Manager pool member, the
entry is the member's IP address and port number, 10.1.1.1:80.
Component
Displays the type of component associated with the IP address. For example, for a Local Traffic Manager pool, the
entry is ltm pool.
Object-ID
Displays the name of a configuration object associated with the IP address. For example, for a Local Traffic Manager
pool named my_pool, the entry is my_pool.
Property
When you specify the all-properties option, displays the name of the property that contains the IP address value. Note
that if the IP address is an object identifier the system displays n/a.
EXAMPLES
show ip-address
Displays the IP addresses currently associated with a BIG-IP system configuration object.
OPTIONS
For information about the options that you can use with the command show, see help show.
SEE ALSO
show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2010. All rights reserved.
BIG-IP 2010-03-11 sys ip-address(1)