sys ipfix elementΒΆ

sys ipfix element(1)					BIG-IP TMSH Manual				      sys ipfix element(1)

       element - Configures element for IPFIX logging.

       sys ipfix

       Configure the IPFIX component within the sys ipfix module using the syntax shown in the following sections.

	create element [name]
	modify element [name]
	  app-service [[string] | none]
	     [ boolean | datetime-microseconds |
	       datetime-milliseconds | datetime-nanoseconds |
	       datetime-seconds | float32 | float64 |
	       ipv4-address | ipv6-address | macaddress |
	       octetarray | signed16 | signed32 | signed64 |
	       signed8 | string |
	       unsigned16 | unsigned32 |
	       unsigned64 | unsigned8 ]
	  description [string]
	  enterprise-id [integer]
	  id [integer]
	  size [integer]

	list element
	list element [ [ [name] | [glob] | [regex] ] ... ]

	delete element [name]

       Note: Default elements loaded at boot time may not be deleted.

       You can use the element component to configure elements for the IPFIX logging interface.

       create element myelement id 345 enterprise-id 543 data-type string size 128

       Creates a element named myelement with element id  345, enterprise-id  543, data-type  string and data size of  128.

       delete element myelement

       Deletes the element named myelement.

       list element myelement

       Displays properties of the element named myelement.

       all  Specifies that you want to modify all of the existing components of the specified type.

	    Specifies the name of the application service to which the element belongs.  The default value is none. Note: If the
	    strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
	    element. Only the application service can modify or delete the element.

	    Specifies the data type of the element.

	    User defined description.

	    Specifies the enterprise-id for the IPFIX element being configured between 0 and 4294967295.  An enterprise id value
	    of 0 is used to define standardized IANA Information Elements.

       id   Specifies the element id for the IPFIX element being configured between 1 and 65535. Values greater than 32767 will be
	    considered NETFLOW-only Information Elements; since the high bit of the 16-bit value is set for those values.

       size Specifies the IPFIX element data size between 1 and 1900 for data-types octetarray and string.  The default is 0; and
	    means variable for these two data-types.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.

       name Specifies a unique alphanumeric name for the component. Preferably camel casing. This option is required for the
	    commands create, delete, and modify.

	    Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
	    expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
	    expression syntax.

       create, delete, glob, list, modify, regex, tmsh

       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2014. All rights reserved.

BIG-IP							    2014-05-28					      sys ipfix element(1)