sys log-config destination management-port

sys log-config destination management-port(1)		BIG-IP TMSH Manual	     sys log-config destination management-port(1)

NAME
       management-port - Sends received messages to a specified IP address and port through the management interface.

MODULE
       sys log-config destination

SYNTAX
       Configure the Management Port Log component within the sys log-config destination module using the syntax shown in the
       following sections.

   CREATE/MODIFY
	create management-port [name]
	modify management-port [name]
	 options:
	  all
	  app-service [[string] | none]
	  description [string]
	  ip-address [ ip address ]
	  port [ port ]
	  protocol [ tcp | udp ]

   DISPLAY
	list management-port
	list management-port [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line

   DELETE
	delete management-port [name]

       Note: You must remove all references to a destination before you can delete the destination. Default destinations may not
       be deleted.

DESCRIPTION
       You can use this destination component to create Management Port Log forwarding destinations for the common logging
       interface.

EXAMPLES
       create management-port my_dest ip-address 1.2.3.4 port 99 protocol udp

       Creates a destination named my_dest which forwards to the address 1.2.3.4:99 using the UDP protocol.

       delete management-port my_dest

       Deletes the destination named my_dest. Destinations cannot be deleted when in use by a publisher or another destination.

       list management-port my_dest

       Displays properties of the destination named my_dest.

OPTIONS
       all  Specifies that you want to modify all of the existing components of the specified type.

       app-service
	    Specifies the name of the application service to which the destination belongs.  The default value is none. Note: If
	    the strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
	    destination. Only the application service can modify or delete the destination.

       description
	    User defined description.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.

       name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.

       ip-address
	    Specifies the IP address that will receive messages from the specified destination.

       port Specifies the port of the IP address that will receive messages from the specified destination.

       protocol
	    Specifies the protocol used to send messages to the specified destination. The default value is tcp. The options are
	    tcp and udp.

       regex
	    Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
	    expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
	    expression syntax.

SEE ALSO
       create, delete, glob, list, modify, regex, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008, 2012-2015. All rights reserved.

BIG-IP							    2015-07-22		     sys log-config destination management-port(1)