sys log-config destination remote-high-speed-logΒΆ

sys log-config destination remote-high-speed-log(1)	BIG-IP TMSH Manual     sys log-config destination remote-high-speed-log(1)

       remote-high-speed-log - Sends received messages to a specified pool.

       sys log-config destination

       Configure the Remote High Speed Log component within the sys log-config destination module using the syntax shown in the
       following sections.

	create remote-high-speed-log [name]
	modify remote-high-speed-log [name]
	  app-service [[string] | none]
	  description [string]
	  distribution [ adaptive | balanced | replicated ]
	  pool-name [ string ]
	  protocol [ tcp | udp ]

	list remote-high-speed-log
	list remote-high-speed-log [ [ [name] | [glob] | [regex] ] ... ]

	delete remote-high-speed-log [name]

       Note: You must remove all references to a destination before you can delete the destination. Default destinations may not
       be deleted.

       You can use this destination component to create Remote High Speed Log forwarding destinations for the common logging

       create remote-high-speed-log my_dest pool-name my_pool

       Creates a destination named my_dest which forwards to the pool my_pool.

       delete remote-high-speed-log my_dest

       Deletes the destination named my_dest. Destinations cannot be deleted when in use by a publisher or another destination.

       list remote-high-speed-log my_dest

       Displays properties of the destination named my_dest.

       all  Specifies that you want to modify all of the existing components of the specified type.

	    Specifies the name of the application service to which the destination belongs.  The default value is none. Note: If
	    the strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
	    destination. Only the application service can modify or delete the destination.

	    User defined description.

	    Specifies the distribution method used by the Remote High Speed Log destination to send messages to pool members. The
	    default method is adaptive: connections to pool members will be added as required to provide enough logging bandwidth.
	    This can have the undesirable effect of logs accumulating on only one pool member when it provides sufficient logging
	    bandwidth on its own. balanced sends each successive log to a new pool member, balancing the logs among them according
	    to the pool's load balancing method. replicated replicates each log to all pool members, for redundancy.

       glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.

       name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.

	    Specifies the ltm pool that receives messages from the Remote High Speed Log destination. This option is required for
	    the create command.

	    Specifies the protocol used to send messages to the specified pool. The default value is tcp. The options are tcp and

	    Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
	    expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
	    expression syntax.

       create, delete, glob, list, modify, regex, tmsh

       No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
       photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
       use, without the express written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2008, 2012-2013. All rights reserved.

BIG-IP							    2014-12-18	       sys log-config destination remote-high-speed-log(1)