sys log-config filter
sys log-config filter(1) BIG-IP TMSH Manual sys log-config filter(1)
NAME
filter - Configures the filter component which filters out log messages for distribution by the publisher component.
MODULE
sys log-config
SYNTAX
Configure the filter component within the sys log-config module using the syntax shown in the following sections.
CREATE/MODIFY
create filter [name]
modify filter [name]
options:
all
app-service [[string] | none]
description [string]
level [ alert | crit | debug | emerg | err | info | notice | warn ]
message-id [ 8 digit hex number | none ]
publisher [[string] | none]
source [ accesscontrol | accessperrequest | adapt | adfs-proxy | alertd | all |
api-protection | apmacl | arp | authz | autodiscd | autodosd | avr |
based | bcm56xxd | bdosd | big3d | big3dshim | bigd | bigdb | bigdbd | bigpipe |
bigstart | bp | keymgmtd | checkcert | chmand | cifs | clusterd | coapi | common |
common-f5logging | common-fpdd | config-db | connapi | cs | cssd | csyncd |
daemon | debugd | deflate | devmgmtd | diameter | dmon | dosprotect | dummy | dwbld | dynad |
eca | em-admin | em-alert | em-clientlib | em-common | em-device | em-discovery |
em-file | em-lib | em-report | em-stats | em-swim | errdefsd | eventd | evrouted |
fflag | fips | firewall-FQDN | firewall-nat | fix | ftp | get-dossier | gtmd | gtp |
guestagentd | ha | ha-table | halmsg | hclientd | hornet-lib | hornet-nest |
hornet-nest-flow-manager | hornet-nest-updater | hornet-neuron-updater | hornet-server |
hornet-text-client | hostagentd | http | htconnector | hwctl | hwpd |
icrd | imap | ip | ipfix | ipfix-proxy | ipfixirules | iprepd | ipsec | isession | istatsd |
ivs | lacpd | layer4 | libhal | lind | lldpd | localdb | lopd | lsn | lsnapi | mamidbridged |
map | mapi | mcp | mcpd | mcpd-apm | mcpd-asm | mcpd-centmgmt | mcpd-clustering |
mcpd-dev | mcpd-dpi | mcpd-firewall | mcpd-framework | mcpd-gtm | mcpd-ips | mcpd-ltm |
mcpd-net | mcpd-pem | mcpd-sys | mcpd-wam | mcpd-woc |
mdm | mgmt-acld | mr | mrsip | msgbusd | mysqlhad | natstatsd | net |
network | no-source | packet-filter | pccd | pcp | pem | pfmand | pgadmind |
pkcs11d | pktclass | plugin | policy | pop3 | portal-access | pptp | probe-plusplus |
promptstatusd | provisioning | pva | pvad | qkcloud | radius | ramcache | rba |
rewrite | rtsp | rules |
saas | saspd | scim | scriptd | sctp | sdmd | sflow | shell | shmmapd | smtps | snmp | sod |
spolicy | ssl | ssl-certificate | ssl-orchestrator | sso | stated | statsd | statusd | stmm |
stpd | subagents | swg | syscall | system-check | tamd | tcl-checker | tcpdump | tftp | tmm |
tmm-tcp | tmrouted | tmsh | ts | tunnel | urlc | urldb | urldbmgrd | vcmpd | vdi | vxland |
webssh | websso | woc-plugin | wr-urldbd | xconfig | xdb | zfd | zxfrd | gpa | cryptod |
icr-eventd | ips | dpi ]
DISPLAY
list filter
list filter [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
DELETE
delete filter [name]
DESCRIPTION
You can use the filter component to configure the filters for the common logging interface.
EXAMPLES
create filter my_filter publisher my_pub
Creates a filter named my_filter with the publisher my_pub.
delete filter my_filter
Deletes the filter named my_filter.
list filter my_filter
Displays properties of the filter named my_filter.
OPTIONS
all Specifies that you want to modify all of the existing components of the specified type.
app-service
Specifies the name of the application service to which the filter belongs. The default value is none. Note: If the
strict-updates option is enabled on the application service that owns the object, you cannot modify or delete the
filter. Only the application service can modify or delete the filter.
description
User defined description.
glob Displays the items that match the glob expression. See help glob for a description of glob expression syntax.
level
The minimum severity level of logs to be filtered. The severity levels in increasing order are debug, info, notice,
warn, err, crit, alert, and emerg. The default value is debug.
message-id
A refinement for filtering out specific logs. The default value is none. This is an eight digit hex number. The
proper hex value can be obtained from an existing log message by extracting the eight digit value.
For example, the message-id for the example log message below is highlighted.
Oct 9 15:38:20 bigip1 notice mcpd[21498]: 01070410:5: Removed subscription with subscriber id logstatd
name Specifies a unique name for the component. This option is required for the commands create, delete, and modify.
publisher
A publisher to send filtered log messages. The default value is none.
regex
Displays the items that match the regular expression. The regular expression must be preceded by an at sign (@[regular
expression]) to indicate that the identifier is a regular expression. See help regex for a description of regular
expression syntax.
source
The stream of log messages that will be filtered by the created/modified filter. The default value is all.
SEE ALSO
create, delete, glob, list, modify, regex, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008, 2012-2013, 2015. All rights reserved.
BIG-IP 2021-09-01 sys log-config filter(1)