sys pva-traffic
sys pva-traffic(1) BIG-IP TMSH Manual sys pva-traffic(1)
NAME
pva-traffic - Displays and resets Packet Velocity(r) ASIC (PVA) traffic statistics for the system.
MODULE
sys
SYNTAX
Configure the pva-traffic component within the sys module using the following syntax.
MODIFY
reset-stats pva-traffic
DISPLAY
show pva-traffic
options:
(default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
global
DESCRIPTION
You can use the pva-traffic component to display traffic statistics, including bits in and out, packets in and out,
current, maximum, and total connections, and other miscellaneous statistics.
The BIG-IP(r) system has one PVA accelerator; however, when you run the command show pva-traffic, the system displays a PVA
statistics entry for each Traffic Management Microkernel (TMM).
EXAMPLES
show pva-traffic
Displays PVA traffic statistics for the system.
show pva-traffic raw
Displays PVA traffic statistics for the system in raw data form.
OPTIONS
For information about the options that you can use with the command show, see help show.
For information about the command reset-stats, see help reset-stats.
SEE ALSO
reset-stats, show, sys tmm-traffic, sys traffic, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010. All rights reserved.
BIG-IP 2011-04-25 sys pva-traffic(1)