sys sflow global-settings vlan
sys sflow global-settings vlan(1) BIG-IP TMSH Manual sys sflow global-settings vlan(1)
NAME
vlan - Manages the global sFlow configuration for VLANs on the BIG-IP system.
MODULE
sys sflow global-settings
SYNTAX
Configure the vlan component within the sys sflow global-settings module using the syntax shown in the following sections.
MODIFY
modify vlan
options:
description [string]
poll-interval [integer]
sampling-rate [integer]
DISPLAY
list vlan
options:
all-properties
non-default-properties
one-line
DESCRIPTION
You can use the vlan component to modify or list the global sFlow configuration for VLANs on the BIG-IP system.
Note: You can modify the global sFlow configuration for VLANs on the BIG-IP system, only if you are assigned either the
Resource Administrator or Administrator user role.
EXAMPLES
modify vlan poll-interval 60 sampling-rate 1500
Sets the poll-interval to 60 seconds and the sampling-rate to 1500 packets for all monitored data sources (VLANs) on the
BIG-IP system.
OPTIONS
description
User defined description.
poll-interval
Specifies the maximum interval in seconds between polling by the sFlow agent of all monitored data sources (VLANs) on
the BIG-IP system. The default value is 10.
sampling-rate
Specifies the ratio of packets observed at all data sources (VLANs) to the samples generated. For example, a sampling
rate of 2000 specifies that 1 sample will be randomly generated for every 2000 packets observed. The default value is
2048.
SEE ALSO
list, modify, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013. All rights reserved.
BIG-IP 2013-10-15 sys sflow global-settings vlan(1)