sys state-mirroring
sys state-mirroring(1) BIG-IP TMSH Manual sys state-mirroring(1)
NAME
state-mirroring - Configures connection mirroring for a BIG-IP(r) system that is part of a redundant pair in a high
availability system.
MODULE
sys
SYNTAX
Configure the state-mirroring component within the sys module using the syntax in the following sections.
MODIFY
modify state-mirroring
options:
addr [IP address]
peer-addr [IP address]
secondary-addr [IP address]
secondary-peer-addr [IP address]
state [enabled | disabled]
edit state-mirroring
options:
all-properties
non-default-properties
DISPLAY
list state-mirroring
list state-mirroring [option]
show running-config state-mirroring
show running-config state-mirroring [option]
options:
all-properties
non-default-properties
one-line
DESCRIPTION
You can use this component to configure connection mirroring on a system that is part of a redundant pair in a high
availability system.
Connection mirroring is the process of duplicating connections from the active system to the standby system. Enabling this
setting ensures a higher level of connection reliability, but it may also have an impact on system performance.
EXAMPLES
modify state-mirroring state enabled addr 192.168.10.10 peer-addr 192.168.10.20
Enables and configures connection mirroring for a high availability system in which one BIG-IP system has an IP address of
192.168.10.10, and its peer has an IP address of 192.168.10.20.
modify state-mirroring state enabled
Re-enables connection mirroring for a system for which connection mirroring was disabled.
OPTIONS
addr Specifies the primary self-IP address on this unit to which the peer unit in this redundant pair mirrors its
connections. The default value is ::.
peer-addr
Specifies the primary self-IP address on the peer unit to which this unit mirrors its connections. The default value
is ::.
secondary-addr
Specifies another self-IP address on this unit to which the peer unit mirrors its connections when the primary address
is unavailable. The default value is ::.
secondary-peer-addr
Specifies another self-IP address on the peer unit to which this unit mirrors its connections when the primary peer
address is unavailable. The default value is ::.
state
Enables or disables connection mirroring. The default value is enabled.
SEE ALSO
edit, list, modify, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording, or information storage and retrieval systems, for any purpose other than the purchaser's personal
use, without the express written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2010. All rights reserved.
BIG-IP 2010-03-31 sys state-mirroring(1)