reset-stats
reset-stats(1) BIG-IP TMSH Manual reset-stats(1)
NAME
reset-stats - Resets statistics for the specified components.
MODULE
All tmsh modules.
SYNTAX
Use the command reset-stats within a tmsh module to reset the
statistics for the specified component to zero. To reset the statistics
for the specified component in one module from within another module,
use the full path to the component.
reset-stats [component]
reset-stats [component] [name]
reset-stats / [module...module] [component]
reset-stats / [module...module] [component] [name]
DESCRIPTION
You can reset statistics for a group of components, or you can reset
statistics for a specific component.
After you reset statistics, when you run the command show, you may see
a value of nan. This stands for not a number, which indicates that no
data is currently available. Wait a few moments and run the command
show again, and in most cases the nan value will be replaced by an
integer value.
It is important to note the following when you reset statistics:
o For a data center, the system also resets the statistics for the
servers in that data center.
o For a Global Traffic Manager server, the system also resets the
statistics for the virtual servers on that server.
o For a Global Traffic Manager pool, the system also resets the
statistics for the pool members.
o For a Local Traffic Manager pool, the system also resets the
statistics for the pool members.
o For a VLAN, you must reset the statistics for the trunks and
interfaces associated with the VLAN.
o You cannot reset statistics for system-supplied profiles.
EXAMPLES
reset-stats pool
From within the gtm module, resets the statistics for all of the Global
Traffic Manager pools.
reset-stats pool pool1
From within the ltm module, resets the statistics for the Local Traffic
Manager pool named pool1.
reset-stats / ltm pool my_pool
From within the gtm module, resets the statistics for the Local Traffic
Manager pool named my_pool.
reset-stats all-stats
From within the sys performance module, resets all performance
statistics for the system.
OPTIONS
component
Specifies the type of the component for which you want to reset
statistics.
module
Specifies the module within which the component for which you want
to reset statistics resides.
name Specifies the unique name of the component for which you want to
reset statistics.
SEE ALSO
tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2012. All rights reserved.
BIG-IP 2012-04-05 reset-stats(1)