auth radius-server
auth radius-server(1) BIG-IP TMSH Manual auth radius-server(1)
NAME
radius-server - Configures a RADIUS server for implementing remote
RADIUS-based authentication of BIG-IP(r) system users.
MODULE
auth
SYNTAX
Configure the radius-server component within the auth module using the
syntax shown in the following sections.
CREATE/MODIFY
create radius-server [name]
modify radius-server [name]
options:
app-service [[string] | none]
description [string]
port [ [name] | [number] ]
secret [none | ["string"] ]
server [ [hostname] | [IP address] | none]
timeout [integer]
edit radius-server [ [ [name] | [glob] | [regex] ] ...]
options:
all-properties
non-default-properties
DISPLAY
list radius-server
list radius-server [ [ [name] | [glob] | [regex] ] ...]
show running-config radius-server
show running-config radius-server [ [ [name] | [glob] | [regex] ] ...]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete radius-server [name]
DESCRIPTION
To authenticate BIG-IP system users when their authentication data is
stored on a remote RADIUS server, you configure a RADIUS server,
configure a RADIUS configuration object that references that RADIUS
server, and then activate RADIUS authentication for the BIG-IP system.
In this case, client credentials are based on basic HTTP authentication
(that is, user name and password).
To configure RADIUS authentication for the BIG-IP system:
1. Use the radius-server component in the auth module to configure a
RADIUS server.
2. Use the radius component in the auth module to create a RADIUS
configuration object that references the RADIUS server you created in
the Step 1. For more information about creating a RADIUS configuration
object, see help radius.
3. To activate RADIUS authentication for BIG-IP system users, type the
following command sequence: modify / auth source type radius
EXAMPLES
create radius-server bigip_auth_radius_server secret "This is the
secret." server 10.1.1.1
Creates a RADIUS server component named bigip_auth_radius_server.
delete radius-server bigip_auth_radius_server
Deletes the RADIUS server component named bigip_auth_radius_server.
OPTIONS
app-service
Specifies the name of the application service to which the RADIUS
server belongs. The default value is none. Note: If the strict-
updates option is enabled on the application service that owns the
object, you cannot modify or delete the RADIUS server. Only the
application service can modify or delete the RADIUS server.
description
User defined description.
glob Displays the items that match the glob expression. See help glob
for a description of glob expression syntax.
name Specifies a unique name for the component. This option is required
for the commands create and modify.
partition
Displays the partition in which the radius server resides.
port Specifies the port for RADIUS authentication traffic. The default
value is 1812.
regex
Displays the items that match the regular expression. The regular
expression must be preceded by an at sign (@[regular expression])
to indicate that the identifier is a regular expression. See help
regex for a description of regular expression syntax.
secret
Specifies the secret key the system uses to encrypt and decrypt
packets sent from or received by the server. This option is
required.
server
Specifies the host name or IP address of the RADIUS server. This
option is required.
timeout
Specifies the timeout value in seconds. The default value is 3.
SEE ALSO
auth radius, auth user, create, delete, glob, list, modify, regex, run,
show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2012. All rights reserved.
BIG-IP 2012-10-19 auth radius-server(1)