auth radius
auth radius(1) BIG-IP TMSH Manual auth radius(1)
NAME
radius - Configures a RADIUS configuration object for implementing
remote RADIUS-based authentication of BIG-IP(r) system users.
MODULE
auth
SYNTAX
Configure the radius component within the auth module using the syntax
shown in the following sections.
CREATE/MODIFY
create radius [name]
modify radius [name]
options:
accounting-bug [disabled | enabled]
app-service [[string] | none]
client-id [none | [string] ]
debug [disabled | enabled]
description [string]
retries [integer]
servers [add | delete | replace-all-with]
{ [ [hostname] | [ip address] ... ] }
servers [default | none]
service-type [default | login | framed | callback-login |
callback-framed | outbound | administrative |
nas-prompt | authenticate-only |
callback-nas-promit | call-check |
callback-administrative]
edit radius [ [ [name] | [glob] | [regex] ] ...]
options:
all-properties
non-default-properties
DISPLAY
list radius
list radius [ [ [name] | [glob] | [regex] ] ...]
show running-config radius
show running-config radius [ [ [name] | [glob] | [regex] ] ...]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete radius [name]
DESCRIPTION
To authenticate BIG-IP system users when their authentication data is
stored on a remote RADIUS server, you configure a RADIUS server,
configure a RADIUS configuration object that references that RADIUS
server, and then activate RADIUS authentication for the BIG-IP system.
In this case, client credentials are based on basic HTTP authentication
(that is, user name and password).
To configure RADIUS authentication for the BIG-IP system:
1. Use the radius-server component in the auth module to configure a
RADIUS server. For more information about creating a RADIUS server, see
help radius-server.
2. Use the radius component in the auth module to create a RADIUS
configuration object that references the RADIUS server you created in
Step 1.
3. To activate RADIUS authentication for BIG-IP system users, type the
following command sequence: modify / auth source type radius
EXAMPLES
create radius bigip_radius_auth servers add {myradiusserver}
Creates a RADIUS configuration object named bigip_radius_auth.
delete radius bigip_radius_auth
Deletes the RADIUS configuration component named bigip_radius_auth.
OPTIONS
accounting-bug
Enables or disables validation of the accounting response vector.
This option is necessary only on older servers. The default value
is disabled.
app-service
Specifies the name of the application service to which the RADIUS
configuration object belongs. The default value is none. Note: If
the strict-updates option is enabled on the application service
that owns the object, you cannot modify or delete the RADIUS
configuration object. Only the application service can modify or
delete the RADIUS configuration object.
client-id
Sends a NAS-Identifier RADIUS attribute with string bar. If you do
not specify a value for this option, the system uses the pluggable
authentication module (PAM) service type. You can disable this
feature by specifying a blank client ID.
debug
Enables or disables syslog-ng debugging information at the LOG
DEBUG level. F5 Networks does not recommend this option for normal
use. The default value is disabled.
description
User defined description.
glob Displays the items that match the glob expression. See help glob
for a description of glob expression syntax.
name Specifies a unique name for the component. This option is required
for the commands create and modify.
partition
Displays the partition within which the component resides.
regex
Displays the items that match the regular expression. The regular
expression must be preceded by an at sign (@[regular expression])
to indicate that the identifier is a regular expression. See help
regex for a description of regular expression syntax.
retries
Specifies the number of authentication retries that the BIG-IP
local traffic management system allows before authentication
fails. The default value is 3.
service-type
Specifies the type of service used for the RADIUS server. The
default is default, which behaves as authenticate-only.
servers
Specifies the host names or IP addresses of existing RADIUS
servers that the BIG-IP system uses to obtain authentication data.
SEE ALSO
auth radius-server, auth user, create, delete, glob, list, modify,
regex, run, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2013, 2016. All rights
reserved.
BIG-IP 2016-03-14 auth radius(1)