ltm data-group internal
ltm data-group internal(1) BIG-IP TMSH Manual ltm data-group internal(1)
NAME
internal - Configures an internal class.
MODULE
ltm data-group
SYNTAX
Configure the internal data-group within the ltm data-group module
using the syntax shown in the following sections.
CREATE/MODIFY
create internal [name]
options:
app-service [[string] | none]
description [string]
records [add | delete | modify | replace-all-with] {
[record key] {
data [value]
}
}
records none
type [integer | ip | [string] ]
modify internal [name]
options:
app-service [[string] | none]
description [string]
records [add | delete | modify | replace-all-with] {
[record key] {
data [value]
}
}
records none
edit internal [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list internal
list internal [ [ [name] | [glob] | [regex] ] ... ]
show running-config internal
show running-config internal [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DESCRIPTION
Data groups are lists of data that you define and use with iRules(r)
operators. Consider using an external data group if the number of
records is expected to be large.
The BIG-IP(r) system includes a number of predefined lists that you can
use. They are:
o aol
o default_accept_language
o images
o private_net
The above lists are located in the file /config/profile_base.conf. When
you run the load command, the system loads these lists; however, unless
you have modified the lists, the system does not save the lists to the
bigip.conf file.
The internal data groups are stored in the bigip.conf file.
Internal data groups can be one of three types:
o A list of IP addresses
o A list of strings
o A list of integers
Strings must be surrounded by quotation marks. Numbers can be either
positive or negative. These groups define the type of data in the
class, which can be IP addresses, strings, or integers>
EXAMPLES
create internal MyDG records add { 10.0.0.0 } type ip
Creates an internal data group named MyDG that contains a single IP
address.
create internal DG2 records add { 192.1.1.255 192.2.1.255 192.3.1.255 }
type ip
Creates an internal data group named DG2 that contains a list of three
network addresses: 192.1.1.0/24, 192.2.1.1/24, and 192.3.1.1/24.
create internal MyDG records add { my_key { data my_value } } type
string
Creates an internal data group named MyDG that contains a single
name/value pair.
OPTIONS
app-service
Specifies the name of the application service to which the data
group belongs. The default value is none. Note: If the strict-
updates option is enabled on the application service that owns the
object, you cannot modify or delete the data group. Only the
application service can modify or delete the data group.
description
User defined description.
records
Configures the data in the group.
regex
Displays the items that match the regular expression. The regular
expression must be preceded by an at sign (@[regular expression])
to indicate that the identifier is a regular expression. See help
regex for a description of regular expression syntax.
type Specifies the kind of data in the group. The default value is ip.
This option is required by the command create.
SEE ALSO
create, delete, edit, glob, list, modify, regex, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2012. All rights reserved.
BIG-IP 2012-12-21 ltm data-group internal(1)