ltm global-settings general
ltm global-settings general(1)BIG-IP TMSH Manualltm global-settings general(1)
NAME
general - Configures the general properties for the BIG-IP(r) and
VIPRION(r) local traffic management systems.
MODULE
ltm global-settings
SYNTAX
Configure the general component within the ltm global-settings module
using the syntax shown in the following sections.
MODIFY
modify general
options:
gratuitous-arp-rate [integer value: 0 ~ 2147483647]
l2-cache-timeout [ integer value: 0 ~ 2147483647]
maintenance-mode [disabled | enabled]
share-single-mac [unique | global | vmw-compat]
snat-packet-forward [ disabled | enabled]
DISPLAY
list general
list general [option name]
show running-config general
show running-config general [option name]
options:
all-properties
non-default-properties
one-line
DESCRIPTION
You can use the general component to modify how the system processes
local traffic.
EXAMPLES
modify general maintenance-mode enabled
Places the Local Traffic Manager system in maintenance mode.
list general
Displays the general properties of the local traffic management
system.
OPTIONS
gratuitous-arp-rate
Specifies how fast gratuitous ARPs can be sent. If it is 0, then
gratuitous ARPs are sent without pause. Otherwise, it specifies
how many gratuitous ARPs can be sent every second. The default
value is 0. The range is 0 (zero) to 2147483647."
l2-cache-timeout
Specifies, in seconds, the amount of time that records remain in
the Layer 2 forwarding table, when the MAC address of the record
is no longer detected on the network.
The default value is 300 seconds. The range is 0 (zero) to
2147483647 seconds.
maintenance-mode
Specifies, when enabled, that the unit is in maintenance mode. In
maintenance mode, the system stops accepting new connections and
slowly finishes off existing connections.
The default value is disabled.
share-single-mac
Specifies the Media Access Control address (MAC address) that the
system assigns to a VLAN. The default value is unique, which
indicates that a VLAN uses a unique MAC address from the pool of
mac addresses assigned to each hardware platform. The global value
indicates that all of the VLANs on the system use the same MAC
address. The vmw-compat value indicates that the MAC address of a
vlan is allocated in a manner compatible with VMware(tm) vSwitch,
and restricts vlans to a single interface, with no trunks allowed.
Changing the value of this feature requires a manual restart of
all TMOS daemons.
snat-packet-forward
Enables or disables SNAT packet forwarding. The default value is
enabled.
SEE ALSO
list, ltm node, modify, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2010, 2013, 2016. All rights
reserved.
BIG-IP 2016-03-14 ltm global-settings general(1)