ltm message-routing generic transport-config
ltm message-routing generic trBltmImessage-routing generic transport-config(1)
NAME
transport-config - Configures a message transport-config instance for
routing generic message protocol messages.
MODULE
ltm message-routing generic
SYNTAX
Configure the transport-config component within the ltm message-routing
generic module using the syntax shown in the following sections.
CREATE/MODIFY
create transport-config [name]
modify transport-config [name]
options:
app-service [[string] | none]
description [string]
source-port [integer]
profiles [add | delete | replace-all-with] {
[profile_name ...] {
context [all | clientside | serverside] read-only attribute for v12.0.0 or greater.
}
}
rules { [none | [rule_name ... ] }
source-address-translation {
options:
pool [ [pool_name] | none]
type [ automap | snat | none ]
}
edit transport-config [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list transport-config
list transport-config [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete transport-config [name]
DESCRIPTION
You can use the transport-config component to define the profiles,
rules, and source-address-translation of an outgoing connection.
EXAMPLES
create transport-config my_transport-config
Creates a transport-config instance named my_transport-config using the
system defaults.
create transport-config my_transport-config { profiles add {
my_genericmsg my_tcp } }
Creates a transport-config instance named my_transport-config that will
use two profiles, my_genericmsg and my_tcp, to create and configure an
outgoing connection. The outgoing connection is automatically
configured with the router instance that created the connection.
OPTIONS
app-service
Specifies the name of the application service to which the object
belongs. The default value is none. Note: If the strict-updates
option is enabled on the application service that owns the object,
you cannot modify or delete the object. Only the application
service can modify or delete the object.
description
User defined description.
source-port
Specifies the source port to be used for the connection being
created. If no value is specified an ephemeral port is chosen. The
default value is 0.
profiles
Specifies a list of profiles that the outgoing connection uses to
direct and manage traffic. The default value is none.
rules
Specifies a list of iRules, separated by spaces, that customize
the transport configuration to direct and manage traffic. The
default value is none.
source-address-translation
Specifies the type of source address translation enabled for the
transport configuration, as well as the pool that the source
address translation uses.
pool Specifies the name of a SNAT pool used by the specified
transport configuration.
type Specifies the type of source address translation associated
with the specified transport configuration.
The options are:
automap
Specifies the use of self IP addresses for transport
configuration server source address translation.
none Specifies no source address translation is used by the
transport configuration.
snat Specifies the use of a SNAT pool of translation
addresses for virtual server source address translation.
SEE ALSO
create, delete, edit, glob, list, ltm virtual, modify, regex, tmsh, ltm
message-routing generic route ltm message-routing generic protocol
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2013-2016. All rights reserved.
BIG-IP ltm2message-routing generic transport-config(1)