ltm monitor snmp-dca-base
ltm monitor snmp-dca-base(1) BIG-IP TMSH Manual ltm monitor snmp-dca-base(1)
NAME
snmp-dca-base - Configures a base Simple Network Management Protocol
(SNMP) Data Center Audit monitor.
MODULE
ltm monitor
SYNTAX
Configure the snmp-dca-base component within the ltm monitor module
using the syntax in the following sections.
CREATE/MODIFY
create snmp-dca-base [name]
modify snmp-dca-base [name]
options:
app-service [[string] | none]
community [ [name] | none]
cpu-coefficient [ [integer] | none]
defaults-from [name]
description [string]
interval [integer]
time-until-up [integer]
timeout [integer]
user-defined [ [name] [value] | [name] none ]
version [ [integer] | none]
edit snmp-dca-base [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
DISPLAY
list snmp-dca-base
list snmp-dca-base [ [ [name] | [glob] | [regex] ] ... ]
show snmp-dca-base [ [ [name] | [glob] | [regex] ] ... ]
show running-config snmp-dca-base
show running-config snmp-dca-base [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line
partition
DELETE
delete snmp-dca-base [name]
Note: You cannot delete default monitors.
DESCRIPTION
You can use the snmp-dca-base component to configure a custom monitor,
or you can use the default base SNMP DCA monitor that the Local Traffic
Manager provides. This type of monitor checks the performance of a
server running an SNMP agent such as UC Davis. Use this monitor only
when you want the load balancing destination to be based solely on user
data, and not CPU, memory or disk use.
EXAMPLES
create snmp-dca-base my_snmp-dca-base defaults-from snmp_dca_base
Creates a monitor named my_snmp-dca-base that inherits properties from
the default base SNMP DCA monitor.
list snmp-dca-base
Displays the properties of all of the base SNMP DCA monitors.
OPTIONS
app-service
Specifies the name of the application service to which the monitor
belongs. The default value is none. Note: If the strict-updates
option is enabled on the application service that owns the object,
you cannot modify or delete the monitor. Only the application
service can modify or delete the monitor.
community
Specifies the community name that the BIG-IP system must use to
authenticate with the host server through SNMP. The default value
is public.
defaults-from
Specifies the name of the monitor from which you want your custom
monitor to inherit settings. The default value is snmp_dca_base.
description
User defined description.
glob Displays the items that match the glob expression. See help glob
for a description of glob expression syntax.
interval
Specifies the frequency at which the system issues the monitor
check. The default value is 10 seconds.
name Specifies a unique name for the component. This option is required
for the commands create, delete, and modify.
partition
Displays the administrative partition within which the component
resides.
regex
Displays the items that match the regular expression. The regular
expression must be preceded by an at sign (@[regular expression])
to indicate that the identifier is a regular expression. See help
regex for a description of regular expression syntax.
time-until-up
Specifies the amount of time, in seconds, after the first
successful response before a node is marked up. A value of 0
(zero) causes a node to be marked up immediately after a valid
response is received from the node. The default value is 0 (zero).
timeout
Specifies the number of seconds the target has in which to respond
to the monitor request. The default value is 30 seconds.
If the target responds within the set time period, it is
considered up. If the target does not respond within the set time
period, it is considered down. Also, if the target responds with a
RESET packet, the system immediately flags the target as down
without waiting for the timeout interval to expire.
user-defined
Specifies any user-defined command-line arguments and variables
that the external program requires. Use the following syntax to
specify a user defined parameter.
modify external my_external user-defined my_param_name
my_param_value
Use the following syntax to remove a user defined parameter.
modify external my_external user-defined my_param_name none
version
Specifies the version of SNMP that the host server uses. The
default value is none.
SEE ALSO
create, delete, edit, glob, list, modify, regex, show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2010, 2012. All rights
reserved.
BIG-IP 2013-09-10 ltm monitor snmp-dca-base(1)