ltm profile request-adapt

ltm profile request-adapt(1)  BIG-IP TMSH Manual  ltm profile request-adapt(1)



NAME
       request-adapt - Configures a HTTP request adaptation profile.

MODULE
       ltm profile

SYNTAX
       Configure the request-adapt component within the ltm profile module
       using the syntax shown in the following sections.

   CREATE/MODIFY
	create request-adapt [name]
	modify request-adapt [name]
	  options:
	    defaults-from [ [name] | none]
	    enabled [ yes | no ]
	    internal-virtual [ [name] | none]
	    preview-size [integer]
	    service-down-action [ ignore | reset | drop ]
	    timeout [integer]
	    allow-http-10 [ yes | no ]

	edit request-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

	mv request-adapt [ [[source-name] [destination-name]] | [[name] to-folder [folder-name]] | [[name...name] to-folder [folder-name]] ]
	  options:
	    to-folder

	reset-stats request-adapt
	reset-stats request-adapt [ [ [name] | [glob] | [regex] ] ... ]

   DISPLAY
	list request-adapt
	list request-adapt [ [ [name] | [glob] | [regex] ] ... ]
	show running-config request-adapt
	show running-config request-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

	show request-adapt
	show request-adapt [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    field-fmt

   DELETE
	delete request-adapt [name]

DESCRIPTION
       You can use the request-adapt component to manage a HTTP request
       adaptation profile.

EXAMPLES
       create request-adapt my_req_adapt defaults-from request-adapt

       Creates a HTTP request adaptation profile named my_req_adapt using the
       system defaults.

       create request-adapt my_req_adapt { enabled yes }

       Creates a HTTP request adaptation profile named my_req_adapt that is
       enabled for adapting HTTP requests.

       mv request-adapt /Common/my_requestadapt_profile to-folder
       /Common/my_folder

       Moves a custom request-adapt profile named my_requestadapt_profile to a
       folder named my_folder, where my_folder has already been created and
       exists within /Common.

       defaults-from
	    Specifies the profile that you want to use as the parent profile.
	    Your new profile inherits all of the settings and values from the
	    specified parent profile. The default value is requestadapt.

       enabled
	    Enables adaptation of HTTP requests. If set to yes, HTTP requests
	    will be forwarded to the specified internal virtual server for
	    adaptation. The default value is yes.

       internal-virtual
	    Specifies the name of the internal virtual server to use for
	    adapting the HTTP request.

       preview-size
	    Specifies the maximum size of the preview buffer. The preview
	    buffer is used to hold a copy of the HTTP request header and data
	    sent to the internal virtual server in case the adaptation server
	    reports that it does not need to adapt the HTTP request. Setting
	    the preview-size to 0, disables buffering the request and should
	    only be done if the adaptation server will always return with a
	    modified HTTP request or the original HTTP request. The default
	    value is 1024.

       service-down-action
	    Specifies the action to take if the internal virtual server does
	    not exist or returns an error. The default value is ignore.

	    The options are:

	    ignore
		 Ignore the error and send the unmodified HTTP request to a
		 HTTP server selected from this virtual server's pool.

	    drop Drop the connection.

	    reset
		 Reset the connection.

       timeout
	    Specifies a timeout in milliseconds. If the internal virtual
	    server does not return a result within the specified time, a
	    timeout error will occur. A 0 value disables the timeout. The
	    default value is 0.

       to-folder
	    request-adapt profiles can be moved to any folder under /Common,
	    but configuration dependencies may restrict moving the profile out
	    of /Common.

       allow-http-10
	    Specifies whether to forward HTTP version 1.0 requests for
	    adaptation. By default only HTTP version 1.1 requests are
	    forwarded. Version 1.0 is not supported. While it should work in
	    most cases, it might be necessary to restrict adaptation on a
	    site-specific basis. The default value is no.

SEE ALSO
       create, delete, edit, glob, list, ltm virtual, modify, mv, regex,
       reset-stats, show, tmsh, ltm profile response-adapt

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2012-2013, 2015. All rights
       reserved.



BIG-IP				  2015-07-22	  ltm profile request-adapt(1)