ltm rule command MQTT return code
iRule(1) BIG-IP TMSH Manual iRule(1)
MQTT::return_code
Get or set return-code field of MQTT CONNACK message.
SYNOPSIS
MQTT::return_code (CODE)?
DESCRIPTION
This command can be used to get or set return-code field of MQTT
message. This command is valid only for following MQTT message types:
CONNACK
Syntax
MQTT::return_code [ ]
MQTT::return_code
* Get the return-code field of MQTT CONNACK message.
MQTT::return_code
* Set the return-code field of MQTT CONNACK message to specified
number.
The number must be smaller than 256.
0 : Connection Accepted.
1 : Connection Refused. Protocol level not supported.
2 : Connection Refused. The client-identifier is not allowed
by the server.
3 : Connection Refused. The MQTT service is not available.
4 : Connection Refused. The data in the username or password
is malformed.
5 : Connection Refused. The client is not authorized to
connect.
6-255 : Reserved for future use.
RETURN VALUE
When called without an argument, this command returns the return-code
field of MQTT CONNACK message.
VALID DURING
MQTT_CLIENT_INGRESS MQTT_SERVER_INGRESS MQTT_CLIENT_DATA
MQTT_SERVER_DATA
EXAMPLES
HINTS
SEE ALSO
CHANGE LOG
@BIGIP-13.0.0 --First introduced the command.
BIG-IP 2017-01-31 iRule(1)