pem global-settings subscriber-activity-log

pem global-settings subscriberBIpemPglobal-settings subscriber-activity-log(1)



NAME
       subscriber-activity-log - Configures the global settings that pertain
       to subscriber activity log messages for Policy Enforcement Manager
       (PEM).

MODULE
       pem global-settings

SYNTAX
       Modify the subscriber-activity-log component within the pem global-
       settings module using the syntax shown in the following sections.

   MODIFY
	modify subscriber-activity-log
	  options:
	    dynamic-subscriber-ids [add | delete | modify | replace-all-with] {
	       [id_name ...]
	    }
	    dynamic-subscriber-ids [none]
	    publisher [name]
	    static-subscriber-ids [add | delete | replace-all-with] {
	       [id_name ...]
	    }
	    static-subscriber-ids [default | none]
	    subscriber-ip-addresses [add | delete | modify | replace-all-with] {
	       [ip address/prefixlen ...]
	    }
	    subscriber-ip-addresses [none]

	edit subscriber-activity-log [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties

	reset-stats subscriber-activity-log

   DISPLAY
	list subscriber-activity-log
	list subscriber-activity-log [ [ [name] | [glob] | [regex] ] ... ]
	show running-config subscriber-activity-log
	show running-config subscriber-activity-log [ [ [name] | [glob] | [regex] ] ... ]
	  options:
	    all-properties
	    non-default-properties
	    one-line
	    partition

	show subscriber-activity-log
	  options:
	    all-properties
	    (default | exa | gig | kil | meg | peta | raw | tera | yotta | zetta)
	    default
	    field-fmt

DESCRIPTION
       You can use the subscriber-activity-log component to monitor behavior
       of the subscribers in the troubleshooting mode by sending activity log
       messages to one or more destinations. You can add static and dynamic
       subscribers by IDs, or by subscriber IP addresses. The activity log
       messages contain the internal information exposing the subscribers
       behavior.

EXAMPLES
       modify subscriber-activity-log publisher pub1 dynamic-subscriber-ids
       add { 4081112222 }

       Adds dynamic subscriber 4081112222 to troubleshooting mode by sending
       activity log messages to all destinations defined in pub1.

       list subscriber-activity-log

       Displays the list of the subscribers in troubleshooting mode.

       show subscriber-activity-log

       Displays the logging statistics of the subscribers in troubleshooting
       mode.

       reset-stats subscriber-activity-log

       Resets the logging statistics of the subscribers in troubleshooting
       mode.

OPTIONS
       dynamic-subscriber-ids
	    Specifies a list of dynamic subscriber IDs to be in
	    troubleshooting mode.

       publisher
	    Specifies the external logging publisher used to send activity log
	    messages to one or more destinations.

       static-subscriber-ids
	    Specifies a list of static subscriber IDs to be in troubleshooting
	    mode.

       subscriber-ip-addresses
	    Specifies a list of subscriber IP addresses to be in
	    troubleshooting mode.

SEE ALSO
       create, delete, edit, glob, list, modify, pem forwarding-endpoint, pem
       interception-endpoint, pem listener, pem policy, pem profile diameter-
       endpoint, pem profile spm, pem reporting format-script, pem service-
       chain-endpoint, pem subscriber, pem subscribers, regex, show, tmsh

COPYRIGHT
       No part of this program may be reproduced or transmitted in any form or
       by any means, electronic or mechanical, including photocopying,
       recording, or information storage and retrieval systems, for any
       purpose other than the purchaser's personal use, without the express
       written permission of F5 Networks, Inc.

       F5 Networks and BIG-IP (c) Copyright 2012-2013, 2016. All rights
       reserved.



BIG-IP				pem0global-settings subscriber-activity-log(1)