sys appiq config
sys appiq config(1) BIG-IP TMSH Manual sys appiq config(1)
NAME
config - Configures this BIG-IP for AppIQ feature.
MODULE
sys appiq
SYNTAX
Automatically configures AppIQ feature on this box with given ECM host
IP.
MODIFY
modify config
options:
host-ip [ip address]
DISPLAY
list config
options:
all-properties
DESCRIPTION
When run for the first time, this command automatically creates
necessary configuration objects to establish communication between BIG-
IP and ECM cluster. The command can be reused to change the configured
host IP of the ECM cluster.
OPTIONS
host-ip
Specifies an IPv4/6 address for the ECM host. By default, this
value is "any6" and AppIQ is disabled. Upon setting this value,
the feature is enabled.
User can later delete automatically created and configured AppIQ
logging profiles under System configuration to disable the
feature. Please note that the command needs to be re-run to enable
the feature if the configuration is manually removed/changed.
SEE ALSO
list, modify, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2008-2016. All rights reserved.
BIG-IP 2016-11-30 sys appiq config(1)