sys ip-address
sys ip-address(1) BIG-IP TMSH Manual sys ip-address(1)
NAME
ip-address - Displays the IP addresses currently associated with a
configuration object on a BIG-IP(r) system.
MODULE
sys
SYNTAX
Display the IP addresses associated with a BIG-IP system configuration
object using the syntax in the following section.
DISPLAY
show ip-address
options:
[all-properties | field-fmt]
DESCRIPTION
You can use the ip-address component to display the location on the
BIG-IP system of the IP addresses associated with a configuration
object. The system displays the following information:
Entry
Displays the IP address and any associated configuration. For
example, for a Local Traffic Manager pool member, the entry is the
member's IP address and port number, 10.1.1.1:80.
Component
Displays the type of component associated with the IP address. For
example, for a Local Traffic Manager pool, the entry is ltm pool.
Object-ID
Displays the name of a configuration object associated with the IP
address. For example, for a Local Traffic Manager pool named
my_pool, the entry is my_pool.
Property
When you specify the all-properties option, displays the name of
the property that contains the IP address value. Note that if the
IP address is an object identifier the system displays n/a.
EXAMPLES
show ip-address
Displays the IP addresses currently associated with a BIG-IP system
configuration object.
OPTIONS
For information about the options that you can use with the command
show, see help show.
SEE ALSO
show, tmsh
COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.
F5 Networks and BIG-IP (c) Copyright 2009-2010. All rights reserved.
BIG-IP 2010-03-11 sys ip-address(1)