sys log-config destination remote-syslog¶

sys log-config destination remBIG-IsysMlog-config destination remote-syslog(1)

NAME
remote-syslog - Configures Remote Syslog destinations to format log
messages into Syslog format and forward them to a Remote High-Speed Log
destination.

MODULE
sys log-config destination

SYNTAX
Configure the Remote Syslog component within the sys log-config
destination module using the syntax shown in the following sections.

DISPLAY
list remote-syslog
list remote-syslog [ [ [name] | [glob] | [regex] ] ... ]
options:
all-properties
non-default-properties
one-line

DELETE
delete remote-syslog [name]

Note: You must remove all references to a destination before you can
delete the destination. Default destinations may not be deleted.

DESCRIPTION
You can use this destination component to create Remote Syslog
formatting destinations for the common logging interface.

EXAMPLES
create remote-syslog my_dest remote-high-speed-log another_dest

Creates a destination named my_dest which forwards to another
destination another_dest. another_dest may not be another Remote Syslog
destination.

delete remote-syslog my_dest

Deletes the destination named my_dest. Destinations cannot be deleted
when in use by a publisher or another destination.

list remote-syslog my_dest

Displays properties of the destination named my_dest.

OPTIONS
all Specifies that you want to modify all of the existing components
of the specified type.

app-service
Specifies the name of the application service to which the
destination belongs. The default value is none. Note: If the
strict-updates option is enabled on the application service that
owns the object, you cannot modify or delete the destination. Only
the application service can modify or delete the destination.

default-facility
Specifies the facility given to log messages received that do not
already have a facility listed. The default value is local0. The
options are local0, local1, local2, local3, local4, local5,
local6, and local7.

default-severity
Specifies the severity given to log messages received that do not
already have a severity listed. The default value is info. The
options are debug, info, notice, warn, err, crit, alert, and
emerg.

description
User defined description.

format
Specifies the syslog format received messages are formatted into.
The default value is rfc3164. The options are legacy-bigip,
rfc3164, and rfc5424. For more information, see the respective
RFCs.

glob Displays the items that match the glob expression. See help glob
for a description of glob expression syntax.

name Specifies a unique name for the component. This option is required
for the commands create, delete, and modify.

regex
Displays the items that match the regular expression. The regular
expression must be preceded by an at sign (@[regular expression])
to indicate that the identifier is a regular expression. See help
regex for a description of regular expression syntax.

remote-high-speed-log
Specifies the forwarding destination to send logs in the syslog
format. This option is required for the create command. It may
only be a remote high speed log destination or a management port
destination.

SEE ALSO
create, delete, glob, list, modify, regex, tmsh

COPYRIGHT
No part of this program may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopying,
recording, or information storage and retrieval systems, for any
purpose other than the purchaser's personal use, without the express
written permission of F5 Networks, Inc.

BIG-IP 2sys-log-config destination remote-syslog(1)